Cannot "validate Configuration"

Hi
After having selected "New Flex and PHP project", I filled out the Create PHP Project form.
Pressing "validate configuration" button fires a warning message on the top of the popup "Cannot validate the configuration. The test file....."
My web root folder is ok and my root url is http://localhost/ which is correct as this adress actually brings me to the Zend Server test page.
Is there something done wrong or other params to set?
Thanks in advance.

I have desinstalled Zend Server and tried with Xampp. Works fine!
I should try again and check this permission. Thanks

Similar Messages

Validate configuration error

I am setting up a new Flex Mobile and PHP Project, my first one. I also installed Zend. And I am getting the following error when I hit validate configuration:
"Cannot validate the configuration. The test file could not be created in the given web root folder." My server location settings are as follows:
Web Root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost (this brings up a zend server test page when I paste it into the browser, which leads me to believe this is working correctly)
Any help would be greatly appreciated!!!

I actually just figured it out, my web root folder was set to read-only.

Wireless WRT160N Connection Error "Windows cannot validate certificate"

I installed and configured the WRT160N v.2 wireless router. My notebook running windows xp sees the network and has a good signal. When I try to connect, I get an error that "windows cannot validate certificate" or "validating identify". Does anyone know what the problem is and how to fix it?
Thanks...Rich

You need to change the Wireless Settings on your router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your new Wireless Network and attempt to connect...
If the above fails :
Please go to the Control Panel and double click on Network Connections, right click on Wireless Network Connection and click on Properties.Choose the Wireless Networks-tab and remove all the preferred networks from the list and click Add...Click the tab Authentication, in this window you have to choose Enable IEEE 802.1x authentication for this network and EAP type set to Protected EAP (PEAP?, now click O.k...
Try to re-connect to your wireless network, it should connect...

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

Unable to swap web app (FKA Website) deployments and cannot update configuration

We are trying to deploy an update to one of our web apps (Hosted in Northern Europe.). Our process is to deploy to a "staging" deployment slot, then swap.
When we try to do this we get the following error:
Failed to swap web app slot production with slot staging: There was a concurrency conflict. Configuration update for Microsoft.Web.Hosting.Administration.WebCloudProvider failed for maximum number of attempts UpdateAppSettings. Failure details: <redacted
as it contained deployment details>
We also cannot apply configuration changes.
Are there currently any issues, nothing is showing on the Azure status page?

The issue Jim ran into was actually a temporary problem affecting a small subset of sites, and at that time it would have failed with any swap method. But the situation was resolved about an hour later, and everything should be fine now. Sorry for not
following up earlier!

RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed Cannot execute configure of database using RapidClone

dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance

dear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance

Cannot validate digital signature - Reader 11.0.10 on Windows 8.1

We cannot validate digital signatures in Adobe Reader 11.0.10 on a Windows 8.1 PC, but the same signatures/documents can be validated in the same version of Reader on Windows 7 Pro. Is there a known issue with signature validation in Reader XI and Windows 8/8.1?

Hi CTMutual_CMHC,
This might not have happened for Windows 8.
Could you please try validating signatures in some different PDF and check.
You can also refer the following link for the same:
https://helpx.adobe.com/acrobat/using/validating-digital-signatures.html#validate_a_digita l_signature
If the issue persists, then try installing the latest version of Reader from here:
Adobe Acrobat Reader DC Install for all versions
Let me know how it goes.
Regards,
Anubha

How to resolve ORA-02298: cannot validate (%s.%s) - parent keys not found

Hi, During the exp/imp process,i have tried to enable the constraints once the import done,but for some of the constraints am getting ORA-02298: cannot validate (%s.%s) - parent keys not found error,can anyone assist me what are all the possible ways to fix this issue. database -ORACLE 11g,o/s -LINUX

Hi. Put the missing values into the parent table or Remove the rows in the child table which contain values that are not in the parent table
http://www.shutdownabort.com/errors/ORA-02298.php
Regards
Javid Hasanov
Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Edited by: Javid Hesenov on Jul 6, 2012 2:03 AM

New domain, Roaming Profiles, Outlook 2010 gives error 'Your Outlook data file cannot be configured'.

Hi there,
I have recently setup a new domain, with a new domain controller and new exchange 2013 server.
these are running on a cluster of 2 x hyper-v 2012r2 hosts. All VMs are running server 2012 r2.
although I don't think that has any bearing on my issue.
I have migrated all of my existing user machines to the new domain.
We use roaming profiles.
When a user logs into their PC for the first time, all is ok.
when a user logs into a different machine (they log off of their first machine and then log into a second machine),
they get the following error when opening outlook.
'Your Outlook data file cannot be configured. C:\Users\%username%.domain\AppData\Local\Microsoft\Outlook\[email protected]'
I can manually resolve this on each machine by doing one of the following.
1. Before the user logs in, I log in as an administrator or browse to the pc from another machine create a folder in users called 'whatevertheuserssusernameis' (please note, I actually put in the user's username, ie OKIRWAN)
when the user then logs in, their profile is created in %username%.domain instead of %username%.
I believe this is the route of the problem, as when we added the new machines to the domain, and they logged in for the first time to their 'usual machine', there was already a folder in users with their username, so when we added to the new domain and logged
in for the first time, it created a new folder called %username%.domain, however when the user logs into a pc they never have logged into before, it creates their profile in %username% but their roaming profile is looking for their OST in C:\Users\%username%.domain\AppData\Local\Microsoft\Outlook\[email protected].
2. My second way around this is to go to control panel and mail and remove and recreate the users outlook profile.
As I have 100 users, who move to various different machines, these manual options are not really viable.
I have tried redirecting the OST file to c:\OST via group policy, this did not resolve the issue.
All users are local admins on their machines.
if I open outlook as administrator then it loads ok and creates the OST file in C:\Users\%username%.domain\AppData\Local\Microsoft\Outlook\[email protected].
however if I close outlook and open it again without running as administrator I get the following error.
File access is denied. You do not have the permission required to access the file C:\Users\%username%.domain\AppData\Local\Microsoft\Outlook\[email protected]. (even administrators on that PC have full access to that folder).
All users are running outlook 2010.
Any help would be much appreciated.
Kind Regards
Owen

Hi,
We can try to set up new profiles for users via creating a PRF file using the Office Customization Tool.
http://technet.microsoft.com/en-us/library/cc179062(v=office.14).aspx
Best Regards,
Steve Fan
TechNet Community Support

Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

Hi All,
Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
Any help would be greatly appreciated.
Thanks in advance.
Samir

Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.

Cisco pix 525 and 515 cannot archieve configuration in LMS 3.0.1

Hi,
we have several cisco pix 525 and 515 cannot archieve configuration in LMS 3.0.1
Any help would be greatly appriciated.
Thanks in advance
Samir

Hi,
Here is the output.
*** Device Details for ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
RUNNING
CM0151 PRIMARY RUNNING Config fetch failed for ********* Cause: SSH: Failed to establish SSH connection to 10.192.18.10 - Cause: Authentication failed on device 3 times.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
But when I do mangement station to Device it gives me following results:
Interface Found: 10.192.18.10
Status: UP
Test Results
UDP     Failed
      sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 64 protocol: udp port: 7
TCP     Failed
      sent: 0 recvd: 0 min: 0 max: 0 avg: 0 timeout: 0 size: 0 protocol: tcp port: 7
HTTP     Failed
      sent: 0 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 33 protocol: http port: 80
TFTP     Failed
      sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 25 protocol: tftp port: 69
SNMPRv2c(Read)     Okay
     sent: 5 recvd: 5 min: 0 max: 0 avg: 0 timeout: 2 min_size: 1472 protocol: snmpv3_get port: 0
SNMPWv2c(Write)     Failed
      sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 min_size: 1472 protocol: snmpv3_set port: 0
SSHv2     Failed
TELNET     Okay
Waiting for your reply.
Samir

Cannot write configuration file

Hello,
I have a problem loading up a project I have taken over from some one else. I need some guidance as I can't seem to find the solution. However im not that familiar with .NET or MVS as I once
was. The message I get is as follows :-
Microsoft Visual Studio
Creation of the virtual directory localhost:49623/ failed with the error: Filename: \\?\C:\Users\firstname.surname\Documents\IISExpress\config\applicationHost.config
Error: Cannot write configuration file
However I have checked the permissions and can't see anything obvious. Under guidance from another developer I have also updated :-
www.nuget.org/
and
www.nuget.org/packages/Microsoft.AspNet.Mvc
I am using a Windows 7 enterprise edition Dell Lattitude laptop. With MVS as follows
Microsoft Visual Studio Professional 2012
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
Installed Version: Professional
Microsoft Visual Studio Tools for Applications 2012   04938-088-1153812-02395
Microsoft Visual Studio Tools for Applications 2012
Office Developer Tools   04938-088-1153812-02395
Microsoft Office Developer Tools
Team Explorer for Visual Studio 2012   04938-088-1153812-02395
Microsoft Team Explorer for Visual Studio 2012
Visual Basic 2012   04938-088-1153812-02395
Microsoft Visual Basic 2012
Visual C# 2012   04938-088-1153812-02395
Microsoft Visual C# 2012
Visual C++ 2012   04938-088-1153812-02395
Microsoft Visual C++ 2012
Visual F# 2012   04938-088-1153812-02395
Microsoft Visual F# 2012
Visual Studio 2012 Code Analysis Spell Checker   04938-088-1153812-02395
Microsoft® Visual Studio® 2012 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V.
All rights reserved.
Visual Studio 2012 SharePoint Developer Tools   04938-088-1153812-02395
Microsoft Visual Studio 2012 SharePoint Developer Tools
NuGet Package Manager   2.8.60318.667
NuGet Package Manager in Visual Studio. For more information about NuGet, visit docs.nuget.org/.
PreEmptive Analytics Visualizer   1.0
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 11.0.5058.0
SQL Server Data Tools   11.1.20627.00
Microsoft SQL Server Data Tools
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 11.0.3436.0
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3436.0
Web Developer Tools   1.0.30710.0
Microsoft Web Developer Tools contains the following components:
Page Inspector: Tool that offers an efficient way to decompose Web Applications and diagnose front-end issues.
Web Publishing: Extensions required for Web Publishing for both hosted servers as well as on premises.
Web Form Templates: Includes the default templates for Web Form Applications.
Editor Extensions: Includes HTML, CSS, and JS editor extensions that greatly enhance the development experience.

I see some others have had success by removing encryption on the IISExpress folder and removing the Read Only attribute as well.
See this post for details.
Others have had success by doing the following:
- Run Command Prompt (cmd) in Admin Mode
- Enter the following command: DISM /Online /Cleanup-image /Restorehealth
...as detailed here.

Event ID 25936 (Cannot validate argument on parameter 'VMMServer'.)

I seem to be getting this Event 25936 very often in the Application Log of my VMM Server. Can anyone guide me to as what might be the problem?
Cannot validate argument on parameter 'VMMServer'. The argument is null. Supply a non-null argument and try the command again. You cannot access VMM management server GSQLMNG1.mami.gov.il. (Error ID: 1604)
Contact the Virtual Machine Manager administrator to verify that your account is a member of a valid user role and then try the operation again.
Thanks,
Reuvy

I got the same problem. Did you solved this?

New-AzureReservedIP : Cannot validate argument on parameter 'Slot'. The argument "MyIP" does not belong to the set "Staging,Production"

I am trying to reserve an IP address in Microsoft Azure using simple PowerShell cmdlet:
$reservedIP = "MyIP"
$location = "West US"
New-AzureReservedIP – ReservedIPName $reservedIP –Label $reservedIP –Location $location
I get an error:
New-AzureReservedIP : Cannot validate argument on parameter 'Slot'. The argument "MyIP" does not belong to the
set "Staging,Production" specified by the ValidateSet attribute. Supply an argument that is in the set and then try
the command again.
Any help?
Thanks

Greetings!
Please try the references below which elaborates on the usage of the cmdlet:
New-AzureReservedIP
https://msdn.microsoft.com/en-us/library/azure/dn690120.aspx
https://msdn.microsoft.com/en-us/library/azure/dn769136.aspx
Thank you,
Arvind

ORA-02298 : cannot validate - parent keys not

Hi,
I am trying to create a FK-PK constraints.
In the alter table command i am using the caluse:
exceptions INTO ... in order to catch all the exception rows .
Can you please explain why i am getting this error message ?
I am using the following command:
SQL> ALTER TABLE STARQ.CALL_FACT ADD (
2 CONSTRAINT CALL_FACT_FK_cmcustdim1
3 FOREIGN KEY (CUST_ID)
4 REFERENCES STARQ.CM_CUST_DIM_1 (DWH_CUST_ID)
5 exceptions INTO starq.exceptions );
CONSTRAINT CALL_FACT_FK_cmcustdim1
ERROR at line 2:
ORA-02298: cannot validate (STARQ.CALL_FACT_FK_CMCUSTDIM1) - parent keys not found

Hi,
>>Can you please explain why i am getting this error message ?
This is a normal behavior. After issued the "alter table add constraint ..." command, you need to query on EXCEPTIONS table.
LEGATTI@XE> create table a (id number constraint pk_a primary key);
Table created.
LEGATTI@XE> create table b (id number);
Table created.
LEGATTI@XE> insert into b values (1);
1 row created.
LEGATTI@XE> create table exceptions(row_id rowid,
2                     owner varchar2(30),
3                     table_name varchar2(30),
4                     constraint varchar2(30));
Table created.
LEGATTI@XE> alter table b add constraint fk_b_a foreign key (id) references a exceptions into exceptions;
alter table b add constraint fk_b_a foreign key (id) references a exceptions into exceptions
ERROR at line 1:
ORA-02298: cannot validate (LEGATTI.FK_B_A) - parent keys not found
LEGATTI@XE> select * from exceptions;
ROW_ID             OWNER                          TABLE_NAME                     CONSTRAINT
AAAD3mAAEAAAABoAAA LEGATTI                        B                              FK_B_ACheers
Legatti

Cannot "validate Configuration"

Similar Messages

Maybe you are looking for