Cannot view confirmations from users outside my cost center

Hi - After applying support packs we are unable to view confirmations created by users who are assigned a different cost center. I am only able to display confirmations of users who share my cost center.
Any advice on how I can display confirmations from users outside of my cost center?
Thanks,
Tom

Hi There,
Ensure BADI BBP_WF_LIST is deactivated and recheck.
Regards,
Matthew

Similar Messages

Is there is a way to have a link from purchase order to cost center report.

Is there is a way to have a link from purchase order to cost center report.
I am meaning kind of:
Standard way to customized this link?
or
User exit to have this link in place
or
Any other solution
Thanks

For me it does not make any sense from going from PO to cost center report.
However, if you want to see the purchase order cost incurred with a cost center, execute KSB1 report. Within the layout, bring "Purchasing Document" field, where you can see the purchase order number in cost center line item report.

No functional area derived from GL account and cost center ccombination sel

Hi,
When doing a goods issue for a delivery, am getting this error. Hope somebody could advice.
"No functional area derived from GL account and cost center combination selected."

Hi,
Go to FS00 and specify the functional area for the gl account. Go cost center change mode specify the functional area. Define the f area in Tcode OKBD, FSP2,KA02,KS12,
Hope this is clear, if yes assign points
Regards,
Sankar

Cannot View Doc from Outgoing Payment under Approval Procedure messages

Hi Experts,
Both Originator and the approver cannot view the some of the pending and rejected documents when they are trying to edit the docuemtns from the approval procedures messages and approval decision reports.
In effect, the approval cannot approvbed the documents as he cannot check the document for approval. The documents can be viewed from the payment draft dopcument. It will be tedious for the approval to go back and forth to draft document and approval decesion report.
I already check the authorization for outgoing payment they both have full authorization. I can view the document as a super user. I need to know what other authorization do I need to check
Both originator and approver has full acess on outgoing payment since some of the documents can be viewed som3 documents cannot bew viewed.
Please help. We are in the data catch up mode for October 2009.
We are using 2007B PL10
Regards,
Amy
Edited by: Sandra Callanta on Oct 20, 2009 11:06 AM

Hi
Login with userid who will approved the document
Go in Admin > Approval Procedure > Approval Decision Report >
Select first check box " No Decision Yet"
select the pending one and approved it > update > ok
Thanks
Kevin

Cannot view movie from site

Whenever I go to the NRK website (for instance:
http://www1.nrk.no/nett-tv/klipp/544484 )
I cannot view the movie.
I have downloaded Silverlight and that helps for Firefox and Opera but it does no good for Safar 4 in Snow leopard.

UptimeJeff wrote:
there are a few ways you can force SSL.
I wonder if using the Server.app to do it directly would be the most robust?
Going to Server.app and selecting Websites ->"Server Website SSL" -> "Redirects Edit..."
Hit the "+" button and then select "When users visit: This website", "Redirect them to: Server Website (SSL)"
Alternatively you could create a different website (SSL) to redirect the defaults to, if you don't like the default name and would prefer something else.
Additionally, I have found that I get the "Calendar service is turned off" until after I use the website to log in as a networked user. The "profilemanager" however does redirect me to the login if I am not already logged in. Logged in or not, the "Change Password" link always comes up with a "Changing passwords is turned off" message unless one has the "Allow users to change password" checkbox checked in the "Server Website SSL". When it is checked off, this link works as expected, allowing you to log in to change your password.
Navigating around this "Server Website" is pretty lousey - you would thing that there would always be links available to the calendar, password reset, and profile manager parts in addition to the wikis, people, documents, and activities. Once you click on one of the last four, you lose any links to calendar, password or profile manager. Anyone have any edits to change the default website to include those links on every page? I would have thought they would live in the pull-down-menu at the top left, or a least a link to take you back to the top of the website.

Just uninstalled Adobe FlashPlayer and cannot view videos from several major sites such as CNN, VRT (Flemish Radio Television), etc...) Which version of Flashplayer is safe to install?

I uninstalled FlashPlayer because the last 2 weeks my fan was running continually and the CPU was hot!
I did this on advise of "mende1" and it solved the problem!
But now I'm stuck with the fact I cannot view those videos that work with FlashPlayer...
On the ADOBE site I can download older versions, starting at 10.1.
I'm confident that the heating problem does not exist with the older versions.
Any idea from which version it started? Which version should be safe to install?
From 10.3 they say that you can update directly to 11.7.
I guess that the problem entered somewhere here.
So I downloaded the file named "playerglobal10_3.swc", but it than it says that there is no standard program associated with it to open.
So what's the next step?
Thank you for any advise.

You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Cannot view photos from Zire 71 Handheld

Hi,
Newby here
I'm having trouble with viewing photos from my handheld, the "Photo" option doesn't appear on Photo Desktop.
The expansion card is empty (when viewing My Pictures on Windows).
Any ideas?
Thanks
Post relates to: Zire 71

What version of Palm Desktop are you using? Was it installed from the Installation CD that came with the device, or downloaded from Palm.com?
If you're using the download, it often does not come with the Media/Photo conduits included. Best bet is the version on the CD.
Wyrenut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

PM Order Confirmation create actual posting in Cost Center, with CE type 43

Dear Expert,
I would like to know the business flow of Plant Maintenance that impacts cost center reporting.
During PM order confirmation, it will create an actual posting in Cost Center from Cost Center Reporting (No FI posting), say CC Operation, with Cost Element type: 43, which is attached with the activity type of Labor Cost assigned the the PM module.
Example: Cost Center: CC Operation, Cost Element: 840001 (CE type: 43), Amount: USD 100- (negative sign)
My Question:
How does this posting (currently is in controlling only) in cost center Operation with Cost Element type: 43 be reflected in my FI reporting?
Let say there is an FI posting of labor cost in CC Operation, amount USD 100, then from Cost Center Reporting, it actually offset both amounts, and this cost center become 0 in amount.
Kindly advise the concept of Plant Maintenance.
This seems like same with the concept of KB21N.
Thanks.

Hi Karthikeyan,
My issue and concern is similar to the issue raised as follows:
Secondary Cost Element Configuration for Plant Maintenance Order
http://scn.sap.com/thread/3488730
In this forum, it says that the posting in CO, during PM order confirmation is ...
+10 for Order and -10 for cost center A
After PM Order settlement:
-10 for Order and +10 for cost center A
From the cost center and PM Order CO report, they are 0 in value ...
Is this the correct way?
Thanks,
-Chin

User Exit for Cost center in ME21N

Hi,
       I have a requirement to validate the cost center with plant.
       If Plant is 1001 then only the cost centers defined for 1001 should be selected in ME21N while creating PO, if different cost center is selected error message should be shown.
       Please let me know how can i do this? I tried to use user exit MM06E005, but if i keep break point and save the PO, its not stopping in this.

Hello Shilpashree
I assume you want to check at the ITEM level. Then your logic should look like this (method CHECK):
" Determine valid cost centers from plant (at header level?)
lt_items = im_header->get_items( ).
LOOP AT lt_items INTO ls_item.
lt_accountings = ls_item-item->get_accountings( ).
LOOP AT lt_accountings INTO ls_acc.
    ls_accounting = ls_acc-accounting->get_data( ). " TYPE MEPOACCOUNTING
    IF ( ls_accounting-kostl IN lr_kostl.
    ELSE.
      ch_failed = 'X'.
      EXIT.
    ENDIF.
ENDLOOP.
IF ( ch_failed = 'X' ).
    EXIT.
ENDIF.
ENDLOOP.
Regards
Uwe

User Exit for Cost Center authority check in reservation & service entry sh

Hi,
We want to have cost center authority check in reservation & SES. Whcih exit should we use for this purpose.
BTW, we tried the same in SES via the user exit SRVREL componet EXIT_SAPLEBND_003 for Change to Comm. Structure for Release Strategy Determination in the include ZXMLUU10 . Since then the Release strategy for SES is not effecting . Even after blocking the entire code by commenting it, the strategy is not effective. We are able to accept the SES using the Flag Button but without any strategy. How to revive the release strategy.
Thanks & regards,
KT Varkey

Hi Ramki,
Thanks for the advice. The problem is solved except that for Cost Centre authority check for SES. Tried SRVESLL but it doesn't work. Any other exit or any specific advice to make SRVESLL work for KOSTL check.
Best regards,
KT Varkey

Cannot view webpages from internet using windows server 2012.

I can ping public websites, such as google.com etc
Dns resolves name resolution correctly, returning correct ip address.
My issue is that no webdata(html) is returned when requesting a webpage from a public website
I have reduced my internet explorer security settings to the lowest possible just for testing.
I can view local websites on my server correctly.
I am also currently trying activate my windows server 2012 and cannot do this as a result of this issue.
No windows update are taking place either.
I am using a d-link adsl router(DSL-2750U) via the lan to access the internet.
My server is a Dell PowerEdge T20
My laptop can connect to the internet and has no issues using the same network.
I have tried using fixed and dynamic IPs
I am trying to connect to the internet for the 1st time from the server.

Hi,
Or please disable all your firewall and AV soft, as far as in know, some AV soft can block some “unsafe” website URL, or disable the IE ESC.
The related article:
How To Turn Off Internet Explorer Enhanced Security Configuration
http://blogs.technet.com/b/chenley/archive/2011/03/10/how-to-turn-off-ie-esc.aspx
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot do nslooup from users after implemented VLAN on network

Hi all,
We just implemented vlan(6 vlans) on our network and it works fine. All traffic from diferent VLANs were routed by the L3 switch. We have 3750 switch which acts as L3 switch and 2970 and CE500 as access switches.
The issue is when clients tried to do nslookup on local DNS but could'nt get a reply. Our clients are very dependent on the AD which in turns also needs DNS to querry the DC.
But prior to implementing VLAN, when we're running on flat network we havent experience this issue.
Please see attached L3 config for reference.
Any inputs will be highly appreciated.
ursulo

Hi Ursulo
You don't need the ip domain-lookup command on the switches/routers if you don't want it - it won't have any effect at all on whether your clients work.
Presuming you have your DNS servers set correctly on your client PCs, you should probably try the following steps:
1) On a client PC on a new VLAN with the problems, type nslookup. Then try entering a server name - try it on it's own (i.e. server1) and as an FQDN (server1.domain.co.uk). Record the results.
2) On your DNS server, try an NSLOOKUP same as before, but point it to itself (once in NSLOOKUP, type 'server 192.168.1.230' if it doesn't have itself as the primary DNS). Record these results.
This should confirm whether the DNS server is responding at all, and whether it is responding from the new VLAN.
A few other questions:
1) What type of client PCs do you have?
2) What DNS servers do you have assigned to the NICs on your DNS servers and DCs?
3) In your DNS management MMC, enable view/advanced features. Do you have folders containing SRV records for your DCs/GCs etc in your domain DNS zone?
Often people have misoconfigured DNS setups with AD, but don't know it because they have flat LANs and NetBIOS will resolve the names and domains via broadcast. Suddenly when they go to a routed network things stop working.
You should also have WINS configured on your network - install this service on your DNS servers, and configure all servers and clients to use the service. It's a common misonception that WINS isn't needed anymore - whilst Windows itself shouldn't need it, some applications (e.g. Outlook) require it for some functions.
Hope this helps
Aaron
Please rate helpful posts...

Cannot view clips from apple homepage ?

Hi there,
have been trying to view the new i phone and top tips video clips from the apple homepage but i can only hear sound no video will play, what am I doing wrong ??? If you can help me please explain in baby language as am very backwards in the computer world !!
Cheers

Go to system preferences-quicktime and under the browser tab make sure 'play movies automatically' and 'save movies in disk cache' are selected. Also under the streaming tab select '1.5 Mbps T1/Internet/LAN' is selected for speed, and enable instant on with a short delay.
-Robert

IPhone cannot view movies from dotMac site if password protected

I input a movie in a iWeb page, password protect the site, publish it and then try to view the movie with my iPhone. I can get into the page after entering my userid and password, but when I select the movie, I get an error message stating "Error playing movie". Called Apple Tech support they said it's my web service. When I told them the service was dotmac, the first tier tech said, "sorry sir, the personal support tech will not take your call."
Maybe if enough of you guys call they see this as a real problem so the software engineers can resolve it.

All you had to do was to disable directory browsing at the
server for this
account. Then nobody can just "browse" the file content of
any folder. Or,
just place a blank, default named file in the folder and
again, when you try
to browse the folder, you just get a blank page instead. No
need to
password protect anything.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"AngryCloud" <[email protected]> wrote in
message
news:g294ti$kn6$[email protected]..
>I password protected the folder that contains all of my
Flash files so that
> people cannot browse through the folder freely. However,
my site now
> requires a
> password just to view flash videos on a page. How can
this be fixed?
>

I cannot view photos from pages of an on-line auction from Firegox, but I can view the photos when I view the page on IE. How can I correct this problem?

When I open to a page from the auction on Firefox, the photos added to the auction to picture the item are not shown. Only a numerical list of the missing photos is visible: 1,2,3, etc. But when the same page is opened on IE, the photos are shown with no trouble. I asked the web site for help, but they had no idea of a problem.

Sometimes images may be blocked by site-specific permission settings, and in other cases by extensions such as ad blockers. (If the images are displayed by a plugin, such as the Flash player, there are additional possible explanations.)
(1) To check permissions, open the Page Info dialog and click into the Media tab. You can do this using either:
* right-click and choose View Page Info > Media
* Alt+t (open the classic Tools menu) > Page Info > Media
Click in the list and arrow down through the various images and watch the box above the image preview area that says "Block images from {site}". If that box is checked for any of the source sites, uncheck it. When you're done, reload the page.
(2) If the images weren't blocked by permissions, try the page in Firefox's Safe Mode. That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
If the images display in Safe Mode, then most likely one of your extensions is blocking them. You might be able to solve that puzzle just by reviewing them, but if you can't find the culprit right away, you can selectively disable them in groups to narrow it down.
You would do that in the Add-ons Manager:
orange Firefox button (or Tools menu) > Add-ons > ''click'' Extensions ''on the left side''
Can you track it down?

Cannot view confirmations from users outside my cost center

Similar Messages

Maybe you are looking for