Cannot view full Airport Utility Screen

All functions are working well, but I would like to put the Airport Extreme in BRIDGE mode
I cannot do this as the Airport Utility page is incomplete
Any help with viewing the Airport Utility page OR especially how to Bridge AE would be appreciated
I need to use the new COMCAST modem and need to put AE in BRIDGE mode
thanks

Everything will likely be fine.....if you....
Open AirPort Utility
Click on the AirPort Extreme icon
Click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode to "Off (Bridge Mode)"
Click Update at the lower right of the window, and give the AirPort a minute to restart

Similar Messages

M trying to add a printer to my extreme network however i only get the basic airport utility screen when I click on airport utility ??? Am I going crazy

m trying to add a printer to my extreme network however i only get the basic airport utility screen when I click on airport utility ??? Am I going crazy

OS X Mountain Lion: Set up a printer to print wirelessly
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

Cannot view full message box in right corner

I recently upgraded my operating system to OS Mountain Lion (version 10.8.2). Since then, I cannot view the full message boxes in the top right hand corner of my screen....half the message is cut off and I cannot seem to move the box over. Can someone assist? The message box is part of my garmin map updater software that alerts me to update my maps.
Thanks

At least some portion of every window is supposed to be drawn ON the screen.
If that message is too far toward the edge, you could try reducing the screen resolution to something very narrow, like 640 by 480 if supported. The hope is that this will place the message box off-screen, so that the System would have to move it back toward the home position to keep it on-screen. When you switch back (presuming the box is still there) it will be firmly on-screen and can be moved into a position you like better.

How do i get to the airport utility screen?

Clueless. Just need to chaneg the pw on my airport extreme and do not know how to get to utility screen Thanks

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPOrt Extreme icon, then click Edit
Click the Wireless tab at the top of the page to get to the wireless settings
Make the changes that you want by editing the password and verifying
It would be a good idea to also change the name of the wireless network to avoid the confusing situation where you have the name network name stored with two different passwords
Click Update to save the new settings and the AirPort Extreme will restart in 30 seconds

Exchange Admin Cannot View Full Room Calendar Permissions

We are a brand new Exchange 2010 SP3 (14.3 build 123.4) shop with Outlook 2010 (14.0.6112.5000), so no older versions of Exchange or Outlook exist in our environment. I have full Exchange administration access to the system and Full Access to
all room calendars.
If I open a room calendar in Outlook and view the Properties, Permissions the Default access only shows two Read options available: None and Full Details. Whereas if another Admin views the permissions it shows all four options.
So if Admin #2 views the room the Default access will show it has access to Free/Busy time, subject and location, but when I view the same room it shows Default as None since the other options are not available to me. So I am not getting a clear indication
of the real Default access nor can I set the correct access. If I view it in PowerShell I can see the correct access. I have cleared my Outlook cache and I am set in non-cached mode and I have even rebuilt my profile, and yet I still only see the
two options rather than all four. I can see all four options if I look at the permission of my own Outlook calendar, but if I look at any other calendar, person or room. Any ideas as to what the problem might be?

Hi,
According to your description, we understand that you have Full Access permission to all room calendars folder. If the Default calendar permission is set to Free/Busy time, you cannot view the exact Default permission. Instead, it shows None. It is normal
phenomenon.
Based on my test, if the Default access permission of room calendar is set to reviewer or higher permission, you can view the
corresponding permission in your Outlook.
I think the reason why Admin #2 can view the real default permission of room calendar is that Admin #2 may have full access permission to the room mailbox instead of room calendar. In other words, you can try to add full access permission to the room mailbox
for yourself to check whether the issue persists:
Add-MailboxPermission –Identity RoomA –User “Brit Whittington” –AccessRights FullAccess
Thanks,
Winnie Liang
TechNet Community Support

I cannot get my Airport Utility to recognize my Airport Express

My base station is set up. I've reset my Express several times but I still cannot get the utility to "see" the Airport Express...I've spent way to much time trying to figure this one out...any advice...?
Using Version 5.3.2 (532.8) (just did the update...didnt' work before either)
--K

I have the same issue, I was able to narrow it down to the software on the Mac, I have a Mac book pro and a pc laptop, the pc can see and change the airport extreme setting no problem (which annoys me due to me not wanting to use PC anymore), but the Mac book does the same thing as the initial poster above. I was on the phone with 3 different people from Mac and the best thing they could come up with was bring the Base station and Mac book to a Genius Bar.
Steps that I have already tried that have not worked are as follows.
• Created new account to test the network connection.
• Deleted, recreated the network connection and rebooted Laptop
• Deleted the Airport Extreme base station utility and reinstalled the latest one (Rebooted after delete, rebooted after install)
• Tried to access the router via hard wire still nothing

Can not see ext HD on airport utility screen

Anyone know what might be wrong. Also I can not use my external HD to wirelessly backup via Time machine. Thanks

Suggest the following:
Check the formatting on the drive. It needs to be Mac OS Extended Journaled. Unless the box indicates that the drive is specifically formatted for Mac, it is likely pre-formatted for Windows NTFS or FAT32, which will not work.
The USB port on the AirPort Extreme tends to be under powered, so a powered USB hub is often required when you attach a drive at this location....even if the drive has its own power supply
Be reminded that Time Machine backups to a drive at the USB port of the AirPort Extreme are not supported by Apple. Some users seem to be able to make this work, some have some limited success and some have no success with this, so keep an eye on thihgs if you decide to try this.

Monitor is blank white when trying to view full screen youtube video.

''locking as a duplicate - https://support.mozilla.com/en-US/questions/783757''
I have an HP w2207h widescreen flat-panel Monitor. When I try to view videos ONLINE, such as YouTube, in full screen mode, the screen goes to a blank white screen. Audio works, no picture. However, when I view the same YouTube video in Internet Explorer everything works fine. Is there a setting I need to put in to fix this? Would appreciate your help!

Try to disable the hardware acceleration in the Flash Player.
See [[Cannot view full screen Flash videos]]
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

Cannot Get AirPort Utility to Update/Work

I cannot get the AirPort Utility Version 6.0 to update on my machine. Worse, I can't get the AirPort Utility to work at all now because of the failed update. Any advice on how to fix the problem? I've tried to install the earlier update (5.6) but that doesn't work either...

This is a Lion issue....AirPort Utility 6.0 is now part of the operating system.....that has been discussed in a number of threads in the OS X Lion support area. Suggest that try over there.
I have not checked recently, but the "fix" mentioned in a number of thrreads (suggested by Apple) was to re-install Lion again. Things may have changed, so you would want to get full details and probably work with Apple directly on this.

HT5022 I cannot install airport utility 5.6 on mountain lion

I have Airport Express that I can use it for streaming music from my iMac and Sharing Printer for home network computers.
I cannot manage the Airport express with Airport Utility 6.1.
It says I need to use Airport utility 5.6 to manage Airport express.
However, I also cannot even install Airport utility 5.6 on Mountain Lion iMac.
Then, How can I use my Airport express?
Is anyone know how to do it?

Use Pacifist to install AirPort Utility 5.6 > http://www.charlessoft.com/

Cannot use airport utility 5.6 on mountain lion?

I upgraded to Mountain Lion and now cannot use my Airport Utility app. It tells me I need Airport Utility 5.6 now, but when I try to download it, it tells me that Mountain Lion does not support version 5.6
Does this mean I need to by a new Airport Base Station?

You can do the job also without any tools.
cd ~/Downloads
wget http://support.apple.com/downloads/DL1482/en_US/AirPortUtility56.dmg
hdiutil attach AirPortUtility56.dmg
pkgutil --expand /Volumes/AirPortUtility/AirPortUtility56.pkg ~/Downloads/AirPortUtility56
gunzip -c < ~/Downloads/AirPortUtility56/AirPortUtility56Lion.pkg/Payload | tar -xvf -
sudo mv Applications/Utilities/AirPort\ Utility\ 5.6.app /Applications/Utilities/

HT3728 Time Capsule LED is solid Amber, will not show up in Airport Utility after any resets. Ideas?

Went to update my TC after adding my AppleID to the "Back to Mac" menu and in the Airport Utility screen a meesage popped up saying "An error ocurred while reading the configuration" and the TC disappeared from the Airport Utility screen. Now there is just a solid amber light. Unplugging the unit for over a minute and then plugging it back in has the same result. A soft reset does nothing, a hard reset does nothing, and a factory reset gets the amber light blinking but when I release the reset it goes back to solid amber. None of these resets gets the TC to show up in the Airport Utility.
I appreciate any help. Thanks.
Model: A1409 Time Capsule 2TB

The solid amber light is an indication that the TC cannot get out of startup mode, likely due to a power supply component failure.
Solid amber is not power supply.. it is a dead hard disk.. the TC cannot finish its boot if the hard drive is not working.
Jeepaxle
If the TC is in warranty or you have applecare on any computer Apple should replace it..
Otherwise it is the poor WD green drive they now use..
Open the TC and replace it.
Sometimes a low level format will revive them.. but I never trust a drive again that died.. Look for a 2TB hitachi or Toshiba.. (same thing). Far better than WD green.
http://www.ifixit.com/Device/Apple_Time_Capsule

Airport Utility Manual?

Hi,
I am using Airport Utility to manage my Time Capsule (airport extreme) and I am wondering if there is a manual for Airport Utility?
First off - I would like to "password protect" access to my Time Capsule. Basically - any of the clients on my network can login to the Time Capsule and change the configuration....how do I create a password?????
Secondly - There are many Airport Utility screens that provide information and I am not sure what the information means? When I look at my wireless clients they all have "signal", "noise" and "rate" and I am not sure how to interpret this information. There are other screens that I also cannot interpret.
So...is there a manual for this utility?
And...can I password protect my time capsule?
Thanks

There are a number of helpful AirPort guides. Two that I would recommend are:
Apple AirPort Networks
Take Control of Your 802.11n AirPort Network
To directly answer your question about preventing access to the base station administration from network guests, you can set a Base Station password. Only users, that know this password, will be able to administer the base station.
You can set this using the AirPort Utility: AirPort Utility > Select the Time Capsule > Manual Setup > AirPort > Time Capsule tab > Time Capsule Password

Airport Utility `install failed' error with both 6.0 and 6.1

Hi folks
I am running Mac OS X Lion 10.7.4 (11E53) and cannot get the Airport Utility to run at all. [5.5.3] The application icon flickers as though it is about to launch and then nothing happens.
I have tried other 5.x downloads and they all fail because I am running OS X Lion 10.7.4.
Doing a standard Software Update or using a download of 6.x from the Apple Support site, the installer comes up with an `install failed' error with both 6.0 and 6.1, having gotten through the complete process and looking like they were `successful'.
It's the only time in two years and many updates later that i have come across this issue, so I am unsure how to start to tackle it.
Any ideas or suggestions please?
Thanks in advance.

Welcome to Apple Communities
Backup your files and try this:
1. Reboot from recovery partition (or as in my case USB recovery drive)
2. Select Re-install Mac OS X
3. Allow the process to run through multiple restarts
4. When reinstall process is complete run software update (side note, my software update would not launch as long as my USB recovery stick was plugged in, weird)
5. Run all updates saving the Airport Utility 6.0 until last.
6. Install the airport utility from software update.

I need an update of Airport Utility.

I just bout a new Airport Extreme. When I started to set it up I got this dialogue box:
<This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility.>
First, there is no page for that address. Where do i find the update?
Thanks

If you are using Snow Leopard as per your profile you cannot update the airport utility anyway.. you must have Lion or Mountain Lion OS on the computer. The new utility is then available as part of the updated OS.. or you can download.
http://support.apple.com/kb/index?page=search&fac=Downloads&q=airport%20utility

Cannot view full Airport Utility Screen

Similar Messages

Maybe you are looking for