Cannot view RT system in browser

Related to this RT problem. I cannot get my RT system to work. Everything is identical to a known-good working system I finished a month ago. Same hardware, SW (2011) (2011RT) etc. Identical hardware in identical slots in the chassis. I can see the hardware in NI MAX. I cannot access the RT system with the browser. I cannot create NI-DAQmx tasks, channels or scales even though NI-DAQmx software is installed on the RT system. This isn't fun anymore, guys.  Thanks in advance. 
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell

Might have made sense to keep this in the same thread.
Starting with the obvious: if the systems are actually identical, you didn't assign them both the same IP address and them put them on the same network, right?  That will cause problems.  Or, alternatively, check that you didn't assign one of them an IP address that's in use elsewhere on your network.
Have you created an image of the working system and then loaded that onto the non-working one?  My apologies if you're already aware of all this.  In MAX, under the Tools menu there's an option to Create Desktop PC Utility USB Drive, which will format a USB drive and put some RT tools onto it.  You can boot an RT system using that drive.  One of the tools that it contains lets you make an image of an existing system, which you can then instal on the non-working system using that same USB drive.  (Of course, related to the above comment, this will give them both the same IP address, so make sure you only have one on your network when you reboot; you should then be able to use MAX to assign it a different address.)
Are you using the same development system to connect to both of the RT systems?

Similar Messages

  • I cannot view my site in browser or publish my site after 2014.3 update

    Hi,
    I updated to 2014.3 and cannot view my site in browser or publish. I see that alot of other people are having issues. Can you please assist. This is very frustrating.
    I am using OS X Yosemite 10.10.2.
    Thank you
    Brett

    Hi Sanjit,
    I cannot even publish the site. Muse crashes when I try to view site in browser and it crashes when I try to publish the site. It is not the browsers - yes I have tried. It has only happened since I updated to 2014.3 - just like everyone else having problems. This is a problem with the update. I can make a new site in the new release and it works - however all existing sites built before 2014.3 release is no good. This a big problem that needs sorting out. I should not have to rebuild everything again. I have sent my muse file via dropbox, as I have seen other people having trouble being asked to send the file through and it will be looked at. The url is http://australiasnaturecoast.businesscatalyst.com/ . This is not the correct version as I made a new site in the new muse update. I need my original version to work. I have tried uninstall and reinstall of Muse and this has not helped.
    Thanks

  • Cannot view pdf files in browser

    brand new imac cannot view PDF files in browser but the PDF's can be viewed if downloaded. All the data in the PDF online have question marks instead, maybe a missing font issue?

    Have Adobe Reader installed? If so, disable the AdobePDFViewer.plugin resident in /Library/Internet Plug-Ins., restart, and try again. For font-associated issues, peruse Font Management in OS X

  • My adobe docs will no longer open in Reader...when I click on them they automatically open in web browser, however, I cannot view them on the browser either...help!

    All of my adobe docs now show up as white items instead of the regular red pdf doc they used to show up as.  When I double click on the pdf doc, it opens in the web browser, however, I cannot view the doc from the browser either.

    See http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7

  • Cannot view new ICal in browser

    SInce updating to the new ICal, it only gives one an option to SUCSCRIBE to my public calendars, not to VIEW with a URL in a browser.
    Help?

    In other words, when one makes a calendar public, it sends an email that only says "Click here to subscribe to this calendar". The old ICal would send an email that said "To View this calendar, click here", "To subscribe to this calendar, click here" and "To learn more about ICal click here"

  • Cannot View PDF in Web Browser error

    Using windows XP sp3 has adobe reader 9 on it...
    Installing Adobe Acrobat 9 Pro extended was trouble prone enough, but now there is more...
    When trying to open a PDF in a browser window, you get the following dialog error message (sample site:http://support.apple.com/manuals/#iphone)
    "The Adobe Acrobat/Reader that is running can not be used to view PDF files in a Web Browser.
    Adobe Acrobat/Reader version 8 or 9 is required. Please exit and try again."
    For the cost of this program, I expected better. The above was not a problem before installing Adobe Acrobat 9 Pro extended.
    Please advise.
    Thanks
    bob

    I did a google search and found a fix that was a bunch of registry entries that worked for me:
    Ted Neubauer, "Reader 9 won't open PDF from web browser" #15, 15 Jul 2008 7:47 am
    It is just anoying to spend this kind of money on a piece of software and have so many problems out of the box.
    Yes, I have run the updater software.
    What is the phone number for adobe support?
    Thanks
    Bob

  • When trying to load the the Seatle Times Crossword, it says "This site uses Java. If Java is installed and you cannot view the puzzle, your browser settings may need changing."

    only started after I installed Firefox 4. had no problems before. IE and Firefox 3, no problems.

    It appears that you either do not have Java installed or that you have it disabled. To test to see if you have Java installed and enabled go to:
    *http://www.java.com/en/download/testjava.jsp
    *Also see: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
    Also, do you see Java in the Windows Control Panel? If not, it is not installed on your system. See:
    *http://windows.microsoft.com/en-US/windows7/Working-with-Control-Panel
    '''Install or Update the [[Java]] plugin''' to the latest version.
    *Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
    **'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
    *Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
    * Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
    * Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
    *Java Test: http://www.java.com/en/download/help/testvm.xml

  • Error Message= x Cannot find the HTML help browser installed on your system.

    Help! I cannot seem to find the solution for the error message I get when trying to generate a layout in Microsoft HTMl Help (Primary Layout). I am using the trial version, but it didn't seem to be an issue for anyone else in my class that was also using the trial version.
    The error message states, "Cannot find the HTML help browser installed on your system."
    Thank you!

    Sounds like a problem with the installation of RoboHelp on those machines. When you install RoboHelp, it installs the necessary files to view a CHM.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Cannot use Adobe Reader to view PDF in web browser error

    I have a new computer and have Acrobat Pro installed.  When I try to click on PDF links in browsers, I get an error:
    Cannot use Adobe Reader to view PDF in web browser.
    I want to be able to open these links using Acrobat Pro.  What can I do in Internet Explorer so I don't always receive these errors, and so pdfs automatically open using Acrobat Pro?
    Steve

    Because it was not designed for Windows 7 doesn't mean it cant run.
    If you install the applications as administrator, you shouldn't have problems. I have installed both Reader and Pro versions on Windows 7 32 and 64 bit without problems, as long as I did it as administrator. You right click on the setup and select Run as Administrator. You don't need to do it for updates if you go through the update option on the help panel.

  • Cannot view pdfs in Firefox. - Browser doesn't recognize them as pdfs

    I cannot view pdfs in Firefox. I checked the Applications section of FIrefox preferences and instead of saying "Adobe Acrobat PDF document"- it says "Adobe Acrobat FDF document. I am guessing that the browser does not recognize pdfs because the content type is incorrect.
    I am using a Mac running OSX 10.8.2 and Firefox 17.0, however I have had this problem for several months and several earlier versions of Firefox as well. Please fix this issue. According to the help center forums, I am not alone with this issue.

    Thank you for your help. What I ended up having to do was to change the Action next to Adobe Acrobat FDF document to "Use Preview". Then again under the Preview.app Document under Content Type, I had to change that to Use Preview as well. It is now working. However, Firefox (Mozilla) needs to change the word FDF to PDF in their preferences file.

  • Keep getting this message"Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." , but cannot view Firefox open window or close it. Have to always reboot system.

    Keep getting this message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, cannot view open window or close Firefox. Have to always reboot system to access the internet.

    For possible causes of this error, and how to troubleshoot it see [[Firefox is already running but is not responding]].

  • XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

    XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

    Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
    ''If it displays in Firefox:''
    It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
    ''If it displays in IE or embedded in another Microsoft application:''
    In a web search I found these suggestions:
    (1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
    (2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
    Any luck?

  • Cannot View Youtube........?

    I am trying to view youtube.  I have downloaded Adobe 10.102.64!  I cannot view youtube.  I have windows xp. I have Internet Exploer 8  I have modzilla firefox.  I have tried installing and  uninstalling.  I have tried to apply the information, from the threads in this forum.  Any assistance will be appreciated.

    Hi, ok thanks. I'm doing this in order to prepare your computer to have the best chance of Uninstalling/Installing Flash Player to be successful. I would keep Avira since it isn't as invasive as Norton and doesn't do as much damage as Norton.
    Follow these steps to Uninstall Norton:
    1. http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN
    (Select which program you have and download it from this list to your Desktop) Be sure to Download and SAVE it to your Desktop. You can disregard any info about a "Key", since you are only Uninstalling not Installing it again.
    You may want to print out the instructions to use since you won't be on that site after you SAVE it to your Desktop only.
    2. Then go to Add/Remove and click on Norton there in the list and Remove from there first.
    3. Reboot(restart) your computer.
    4. Close All browser windows, you'll just be looking at your Desktop
    5.
    6. AVIRA ANTIVIR
    Please navigate to the system tray on the bottom right hand corner and look for an open white umbrella on red background (looks to this: )
    right click it-> untick the option AntiVir Guard enable.
    You should now see a closed, white umbrella on a red background (looks to this: ) You are just disabling Avira so it won't interfere with the Removal of Norton, turn it on after Norton is Removed and you have Rebooted(restarted after the Removal of Norton)
    7. Turn Avira back on.
    You may want to print these instructions out also, LOL
    Thanks,
    eidnolb

  • Can't view svg file in browser

    Hi,
    Can anybody help with this one...
    I've generated a map with format of svg_url. If I open the generated svg file directly from the /images directory, it displays perfectly but if I try to use the url that's generated ...
    http://127.0.0.1:8888/mapviewer/images/omsmap2_15.svg?refresh=411588754582458831
    I get ...
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/2001/REC-SVG-20010904/DTD/...

    Hi,
    Many thanks for reply. Yes, I can see that page.
    I think my problem is that I'm trying to view the svg file offline and its complaining that it can't access the DTD file. Having said that, I don't understand why when I open the svg file directly, it displays no problem. Its only when I try to display it through the browser that its giving the DTD error.
    Is there a way of getting it to ignore the DTD file?

  • I cannot view my videos after upgrading to OSX

    I cannot view my videos after upgrading to OSX. Each video I try to open the message on the black background is Blocked Plug-In. In system preferences I have the latest Java but Flash Player does not upgrade to Flash 12 after numerous attempts.

    HI MortenEJ,
    Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
    I still encounter the same problem. I have important messages in my inbox I want to keep. 
    I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

Maybe you are looking for

  • Copying .avi files from Imac to external WD Hard Drive

    I'm new to the Mac and having a few file issues. I have copied from my old PC a number of large (12GB) .avi files to the internal (500GB) drive on my Imac. I have recently bought a 1TB WD external drive and wish to copy the avi video files on the Ima

  • No audio from outputs 2 and 3 since Windows 7 install

    ? I have recently upgraded my PC from Windows XP to Windows 7 (32-bit). I am using a Sound Blaster Audigy 2 card. My problem is, since upgrading to Windows 7, the audigy card is no longer sending a signal out via the output jacks 2 and 3 (black and y

  • How do I browse through pictures (in open state) using arrow keys

    Hi all. I know this is a lame question. But I am new to Mac. How do we navigate through photos in open mode. I mean usually in Windows, we open one picture and use arrow keys to navigate between photos.What are the keys I can use to navigate between

  • Parsing out numbers

    Trying to parse out the number strings into its own columns with this expression: WITH T as (SELECT  '53-2010-2-101' test_string FROM DUAL union all SELECT  '2219-2010-3-22' FROM DUAL union all SELECT  '236350-2010-4-3' FROM DUAL) SELECT SUBSTR(test_

  • Converting fonts and colors in master templates

    Hello, I'm learning Keynote 09. In order to create a new project, I clicked on the "White" theme chooser. I'd like to personalize the slides in that theme by changing the fonts and colors. What's the best/fastest way to do this? Thank you! Joe