Cannot view transport controls

For some reason I am unable to view my transport control bar, when it used to be visible. I think it may be a silly problem that I just cannot seem to fix, though I've tried adjusting the screen and everything I can think to help fix the problem. I simply cannot scroll down to the bottom of the screen to see the transport controls though when i minimize it on screen with the other applications showing it is obvious that the controls are at the bottom of the page. I just cannot access them when I have garage band pulled up. HELP!

Wow - thank you!!! I had no clue that's what I needed to do, so now I feel slightly ridiculous. In any event, I appreciate it!

Similar Messages

CD view - transport controls

In the CD view, it would be really handy if there was a way to play a CD list as if it were an actual CD.
In other words, add a set of transport controls to CD view.
This would allow you to audit track order, track-to-track silence, volume, etc. without actually burning a CD.
Big time-saver for me. Perhaps this is already possible ?

Wow - thank you!!! I had no clue that's what I needed to do, so now I feel slightly ridiculous. In any event, I appreciate it!

After upgrade from TFS 2010 users cannot view source control

I recently did a in place of upgrade of TFS 2010 to TFS 2013. All of my users permissions stayed in tact. The users (contributors) cannot view any of the source control in either in VS 2010 or 2013. Since I am the administrator I
see everything and have no issue. Is there something that did not get brought over in the upgrade?

Hi Rrenn49,
Thanks for your post.
You upgraded to TFS 2013 Update 4? There’s no any issue or warning during upgrade process?
What’s the detailed message they received when the contributors try to view source control files?
Please manually check the contributors group’s permissions on your TFS Source Control.
If you add a new user into your contributors group, this new user can access TFS Source Control correctly?
If you have any further research of this issue, please share your experience here.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot view quicktime window normal size and still see controls!

Help!
I cannot view quicktime window normal size and still see control butttons (pause, play etc.)
I search this forum and found another previous similar question, but the answer. (To use control+0, which would make it half-size.), is not what I need.
What I need is to have a nice fuller size view, (not the narrow little half-size), but any way i find of doing that hides the controls below the bottom of my screen!
I cannot resize it from any side, except the bottom r. corner, which is hidden with these desireable fuller options.

Update: this was my mistake - I had neglected to configure all the view containers in the WebDynproCO window, which was generated by adding the GP interface to the component. All is well.

Requested VI is broken and cannot be viewed or controlled.

We are currently running a cFP-2120 with cFP-AIO-610. The unit has worked without any issues and have been able to log into it via the web to setup tests and confirm them. Recently we have gone to the web address and the webpage opened, but the plugin for LabView states "Requested VI is broken and cannot be viewed or controlled". I have disabled the IV and we get the same error. I am able to FTP into the unit and look through the files without any issues.
Any suggestions to the issue this could be having? Is there a corrupt file?
Thanks,
Chip

Chip,
Judging from your level of experience with LabVIEW, I highly suggest reloading all of the files onto the cFP. The error means that the VI you are trying to access is not runnable. In a Windows environment, I would suggest to simply open the VI and fix where it was broken. However, since the VIs are stored on the cFP as .rtexe files, they are no longer editable, and therefore you will have to reload the original source files from your developer.
I am fairly confident that reloading all the files will fix your problem, but post back if you are still getting the error after transferring everything over via FTP.
Sincerely,
Chris G in AE

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

Transport control program tp ended with error code 0211

Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
Harry

Dear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry...

Transport control program tp ended with error code 0203

when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.

Dear Allen,
The transport control program tp collects all return codes that occur when a tp command is executed. From all of these single return codes, a combined return code is calculated that tp outputs as a result at the end the command. During an import, for example, all return codes for individual import steps are handled. If a special return code does not occur, then the combined return code at the end is the maximum of individual return codes that occur. In addition to the value of the return code, tp also gives a short description of this return code. You can display this short description using the command explainrc.
Normally, all return codes that occur originate from individual transport steps. Since these individual return codes can only have the following values 0, 4, 6, 8, 12, 13, 14, 16, the combined return code also has one of these values. However, if a general error occurs, a single return code over 200 is generated. For example, this could arise if tp cannot establish a connection to the database. The maximum return code for all single transport steps is output in a separate message before specifying the combined returned code. In this case, the combined return code is always the return code of the general error message.
<b>tp Commands:</b>
tp addtobuffer <request> <sapsid>
As of Release 4.6A, an explicit addtobuffer command leaves the position of the entry unchanged, if the relevant transport request is already in the buffer. Only the status of the entry is changed:
Unconditional modes appearing in the command line are added to the unconditional modes in the buffer.
All the steps of the entry are re-initialized.
If the entry found is not an initial entry, the import step for the command file is set to *4000 .
Before you call this command and its options, consider the effects of changing the import sequence.
tp cleanbuffer <sapsid>
This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
tp delfrombuffer <request> <sapsid>
If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
Before you call this command, consider the effects of changing the import sequence.
As of Release 4.6A: If a transport request was only partially imported, you can delete this type of transport request from the buffer. However, if a deleted transport request is placed in the buffer (without having been initially or completely imported), the attributes of the old entry are reactivated. This means the return codes, the unconditional modes and tags of the deleted entry appear in the new entry.
tp delstopmark <sapsid>
If the list of requests marked for import into the specified SAP System contains a STOP mark, the mark is deleted.
tp export <request>
This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions.
tp reformatbuffer <sapsid> [options]
This automatically reformats the entire buffer.
As of Release 4.5A, there are 2 different formats for buffer entries. (As of Release 4.5A, tp can work with both formats, and with a puffer containing heterogeneous entries. As of Release 4.6A, tp can work with 3 formats.)
However, in certain cases entries with the old formatting have to be reformatted during the normal run of tp . In this case, the entire buffer is automatically reformatted.
If you use the options downtorelease and Iagree for command reformatbuffer , you can format the buffer so that its formatting is compatible with an older release:
Option downtorelease <Release>
The command reformatbuffer with this option formats the buffer so that the formatting corresponds to the one used in an old release. This is necessary if tp writes buffer entries to the buffer of another system, but uses a buffer format that the transport control programs does not understand in this system.
Since older formats cannot store the same amount of information as the newer ones, some information contained in the original buffer may not be stored in the unformatted buffer. This may lead to data loss.
To avoid data loss, the original buffer is stored. In addition, you have the following functions:
Displaying the unformatted buffer (using showbuffer <SID> )
Displaying the original buffer (using showbuffer buffer=<SID>SAV )
Accepting the unformatted buffer (using reformatbuffer and the option Iagree yes )
Resetting the changes (using reformatpuffer and the option Iagree no )
If you call reformatpuffer using downtorelease , tp displays in detail if information was lost by reformatting, and what that information was. tp also names the commands that is has to execute to accept or reject the changes.
If you use the option downtorelease , you must also specify the option Iagree with yes or no . You cannot use the transport system until you decide to accept or reject the changes.
Option Iagree
Here are the following values for this option:
yes ( true )
Accept the change made by tp reformatbuffer <SID> downtorelease <rel>
In this case, tp deleted the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
no ( false )
Reject the change made by tp reformatbuffer <SID> downtorelease <rel> In this case, tp copies the backup of the original buffer back and deletes the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
tp setstopmark <sapsid>
A special STOP mark is added to the list of requests registered for import into the specified SAP System. The commands tp import all <sapsid> and tp put <sapsid> only process the requests in front of this stop mark.
If there is no stop mark, it is automatically generated by the commands
tp import all <sapsid> and tp put <sapsid> .
When all the requests in front of the stop mark have been imported successfully, at the end of all the calls the related marks and the mark itself are deleted.
A STOP mark can only be placed at the end of the change requests that have already been marked. In addition, it can only be set if no other mark of the same kind already exists.
tp showparams <sapsid>
This tp function displays which values the individual parameters of the transport profile have for the current SAP System.
tp verse <request>
This creates versions of the objects in the specified request. This transport step is contained in command export .
As of Release 4.5A, more actions that prepare the export are performed in this step.
Thanks and Regards,
Naveen.

Problem in extended Transport control while setting up transport request.

I created a BDC program which will create a database table upon executing..
The problem is the program worked well since yesterday, But today when i executed it , it is showing a information message when creating a new transport request .
Extended transport control is not active:
Cannot specify target client
Since it s a recording ,and all the windows are processed using an OK CODE, this info box comes all of a sudden .I dont kno what went wrong , coz it was working fine the previous day.
i could not create a new workbench request even after ignoring that info message.
Pl suggest me what could be wrong.

This message has a long text, please read it.
Check with your system administrators, if they have changed anything regarding the transport process.
In addition, instead of using "fragile" recordings, try using function modules like DDIF_TABL_PUT.
Thomas

Cannot view pdf using Internet Explorer 8.0

Running Vista 64-bit, IE8.0, Adobe Acrobat 9.4.1 (Pro). I cannot view pdf documents on line --- a blank page opens, but no document is visible. Java is loaded, ActiveX controls are in default mode, and I've done a "Repair Adobe Installation". Anyone else seeing this? How fixed?
Thanks,
OMM

Try : http://kb2.adobe.com/cps/328/328233.html

Cannot view photos in the stream on iPhone 6 but can with my other 4 iOS devices

I just purchased an iPhone 6 and the setup smooth but one thing..photo stream. I can take pictures and they go in the stream and I can view from my other iOS devices but I cannot view photos taken with other devices on the iPhone 6. All use the same iCloud ID.

Hi JinnaWinkas,
Thanks for visiting Apple Support Communities.
Try these steps first if the Photo Stream on one of your PCs is not updating:
you can't connect to the Internet, iCloud Photos will not be able to send or receive updates to My Photo Stream. If necessary, troubleshoot your Internet connection on your PC, Mac, or iOS devices.
Open the iCloud Control Panel and make sure that you're signed in to the same iCloud account that you're using on your other supported devices.
In Windows 8.1, go to the Start screen, click the down arrow in the lower-left corner, then click the iCloud app.
In Windows 8, go to the Start screen, and click the iCloud tile.
In Windows 7, choose Start menu > All Programs > iCloud > iCloud.
Make sure that iCloud Photos or Photo Stream is turned on in the iCloud Control Panel. Click the Options button and make sure that My Photo Stream is turned on.
Close and reopen the iCloud Control Panel.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
You can find the article with these steps here:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Best Regards,
Jeremy

Cannot view pictures in iPhoto

I have iPhoto 7.1.3 and OS 10.4.11
I have read all the posts regarding the changes with iPhoto and the inability to view the individual files in the latest version.
However, in iPhoto when I try to view a photo, I get the ! icon. As a result, I cannot view the picture, drag it to the desktop or edit it. I am able to view the details of the picture, including file name and size. So I believe the picture exists, but I don't know why I cannot see it.
I tried rebuilding iPhoto during application launch by holding the control-option keys. Nothing has changed.
Someone please help as I need to access my pictures for project.
Thanks
Harinder
<edited by host - for your privacy do not place email addresses in the body of your posts.>

Harinder
Welcome to the Apple Discussions.
Never post your email on an internet forum.
As you've tried rebuilding the library then I would move on to recovery mode. Your db has been corrupted:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Cannot view images using Preview

Happy New Year to all,
I cannot view .jpg files in Preview. I have .jpg files in various folders. If I:
a) Double click the .jpg file in Finder the Preview icon arrives in dock but no image is displayed.
or
b) Right click the .jpg file in Finder and select open with Preview the same as above happens.
If I then right click the Preview icon in dock I can see the image file name with a 'tick' mark next to it but no image is displayed.
The Preview help section in Apple is no help whatsoever. Any ideas ?
I am fairly new to the Mac so do not know if I have had this problem from day one, never tried before.
Thanks

Thanks for the feedback. Now, close out the topic.
Since you're a newbie, check these out:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Transport Control program tp edded with error code 0247

Hi Guys
I have co setup TMS in a three system landscape, with the PRD server being the transport domain controller. The three systems are running on the HP -UX OS. The import queue of the PRD server remains empty. All the checks on the TMS configurations shows OK.
When i try to add the transport request from Extras > Other Requets> ADD and enter the transport requet no. I receive this message:
Transport Control program tp edded with error code 0247
Errors: add buffer has problem with data- and/or cofile
Can someone assist? I have got some challenges on linux. Are there steps i need to follow or is there something i need to do?
Cheers,
Daniel

Daniel,
Mostly this issue comes when you have some permission problem.
Please check the permission of your /usr/sap/trans/bin and related directories.
It is ideally sidadm.sapsys. Please give 775 to respective directories.
If your Trans directory is mounted, please check if it is properly mounted or not.
If it is not working, please check the log in TMS alert Viewer (Go to STMS Monitor>TMS Alerts>TMS Alert Viewer)
and paste the detailed log here.
Regards,
Sujit.

Cannot view Japanese font inside flash player.

For example, on http://lyric.kget.jp/lyric/kq/qu/ , I cannot view the lyrics of the song inside the Adobe flash player, and all I see are just random symbols and letters. Is there any way to fix this? (I have just reinstalled the latest version of the Adobe flash player and it does not fix the problem.)

you posted this question 2 years ago so i don't know if u still need help.
awn, i had the same problem and i just learned how to solve it:
go to "Control Panel" -> select "Region & Language" -> select "Change display language" -> choose "Administrative" tab -> you should see the button "Change system locale...", just click and change to "Japanese (Japan).
it works for me so i hope it'll work for u too

Cannot view transport controls

Similar Messages

Maybe you are looking for