Cannot work out how to get correct printed colours
I'm having major problems geting prints from Aperture that are correct.
Under Leopard I had no problem using ColorMunki generated profiles. Prints were beautiful from my HP B9180.
I upgraded to Snow Leopard and nothing prints even close.
I am using that latest ColorMunki software, HP driver that was updated via Software Updates and Aperture 2.1.4.
I am sure that I am setting something wrong in either one of the print dialogs, either when creating a profile or when printing.
One thing I have noticed is that when printing via ColorMunki, the HP print dialog has a section called Color Matching, the HP print dialog in Aperture does not.
Any ideas would be helpful.
I've been experimenting some more, and I believe that I've found a partial solution.
*In the ColorMunki (HP) print dialog*
_Color Matching tab:_
+Vendor Matching:+ selected
_Paper Type/Quality tab:_
Paper: HP Advanced Photo Paper, Satin Matte
Quality: Best
Source: Speciality Media Tray
+Color Options section-> Color:+ Application Managed Colors
*In the Aperture print dialog*
Printer: HP Photosmart Pro B9100 Series
+ColorSync Profile:+ The profile created by the ColorMunki with the settings above.
+Black Point Compensation:+ Not ticked
_Print Settings (HP) dialog (After selecting the Print Settings button):_
_Color Matching tab:_
Cannot select tab
_Paper Type/Quality tab:_
Paper: HP Advanced Photo Paper, Satin Matte
Quality: Best
Source: Speciality Media Tray
+Color Options section->+ disabled as profile is selected above
The prints that I now get are a bit darker than I would like, but I assume that I can use the Gamma to change that.
The images that I printed under 10.5 were excellent and did not require any tweaking, which is the situation I would like to be in again.
I tried leaving Black Point Compensation on, but the images produced have a very Magenta tinge to them.
Luckily I have a full backup of my Leopard install, so I have the option to revert to that if I cannot find an adequate solution to this.
Similar Messages
-
I am trying to download iPhoto on my MacBook Air. I am told I need IOS 10.10. I cannot work out how to get that. I am told that my updates are up to date when I check.
Never mind got the answer!
-
I have managed to get into the US store and cannot work out how to get back to the UK store - can you help?
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region -
I Have a Kyocera FS-C2026MFP printer/scanner. How can I only pint the document in Black. I cannot work out how to not print in colour to save the inks!!
Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc." or "Kyocera Inc."
http://usa.kyoceradocumentsolutions.com/americas/jsp/upload/resource/25359/0/Mac Driver3SoftwareGuide1.1.pdf
On the printer driver documentation, Page 5, in the Imaging setting, although the options are not specifically shown, there should be an option on that screen of the print driver to click and select "B/W" or 'black and white' or 'grayscale' or 'monochrome' as Print Mode rather than the "Full Color" option shown in the illustration below.
You access these settings once you have selected 'Print' from an app.
If necessary, you might need to click on the 'Down arrow' button next to the printer name (OS X 10.6), or 'Show Details' button at the bottom of the print dialog box (OS X 10.8) to see additional settings. -
My boss is on Entourage/MAC 2003 and I am on Windows 2007, I cannot seem to work out how to get copies of his meeting requests as his only delegate.
The manual says tick 'send copies to delegate' but there is no box in that version to tick. Anyone?
Thanks!
BethMy boss is on Entourage/MAC 2003 and I am on Windows 2007, I cannot seem to work out how to get copies of his meeting requests as his only delegate.
The manual says tick 'send copies to delegate' but there is no box in that version to tick. Anyone?
Thanks!
Beth -
I purchased an audio book from itunes and cannot figure out how to get it on my nano 7. I have tried everything.
Have you double checked to make sure these Audiobooks are configured to sync to your iPod from under the iPod's Books configuration tab in iTunes? This is assuming that the audiobooks are already stored in your iTunes library and appear under the Books category.
To access this configuration tab, plug in your iPod and select it from under the Devices section in the left hand pane of iTunes to bring yourself to the iPod's Summary tab. Now locate the Books tab across the top in the main iTunes window and select it. Here you can configure what and how audiobooks are synced to the device.
If you make any changes to this tab, make sure to hit the Apply button on in the lower right hand corner. This will sync the updated changes to your device.
B-rock -
OneNote Windows 8.1 App Changed to Chinese and Cannot Work Out How to Change to English
Hello
Since upgrading my Surface Tablet from Windows 8 to 8.1 the OneNote app has changed to Chinese and I cannot work out how to change it back.
Everything else appears to be in English including the desktop version of OneNote 2013 and only the OneNote app appears to be affected.
The tablet is set to English UK in the regional settings and I have already tired removing and reinstalling the app but it is still in Chinese.
I have just upgraded to the Surface 2 and after signing in with my Microsoft account, the OneNote app is in Chinese on here as well.
I have tried all the settings but it is a bit difficult as I can't understand what they say.
Any help would be appreciated.
Thanks
Robin
Robin WilsonHello Tony
I purchased both the Surface 1 from John Lewis (department store) and the Surface 2 from PC World.
The surface 1 was fine until installing Windows 8.1 preview and this is when it changed to Chinese.
The regional settings are set correctly to UK so I am unsure how to get it back to something I can understand.
The app is in Chinese on my Windows 8.1 PCs as well at home and at work but all are set to UK. It seems to change as soon as I sign in with my Microsoft account so I don't think the issue is a surface RT issue although it may have originated from there.
I have tried the option to uninstall it from all synced PCs and then install it again but it just installs in Chinese again.
OneNote 2013 doesn't seem to have this problem and it is only the MX/App version.
Thanks
Robin
Robin Wilson -
Hi, I am going to an exhibition where there is no internet access but would like to show people around my website. I have added "scrapbook" but cannot work out how to 'save' an entire site for viewing off-line. I thought there was a way to specify 1/2/3 clicks from home page etc. Please help. DAVID
OK, solved my own problem, but am posting here in case someone else has the same problem. It totally does not make sense, especially considering that it stopped after I reinstalled Lion, but the good thing is I have my files back.
I scoured the web and found a lot of other people are having the same problem. Most of them didn't have a clue how to fix it. This discussion was the most helpful to me: https://discussions.apple.com/thread/2569766?start=30&tstart=90
So, I went to the WD page and followed the instructions. The first suggestion was to plug it directly into a wall, because it may not be getting enough power from a power cord. I did this and it fixed the problem. Who would have guessed?
Anyway, if anyone else is having this problem, go to your manufacturer's website for help. Here's WD's help: http://wdc.custhelp.com/app/answers/detail/a_id/1164/related/1/session/L2F2LzEvd GltZS8xMzI2MzIzMjUwL3NpZC82dmo0blZOaw%3D%3D -
I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me. I did check internet for solutions. The instructions I found said to use a "home button" on the remote. There isn't one. I sure would appreciate help if someone knows a solution. My first post - hope I did this right.
if its anything like my Sony, theres a button top left corner that upon each press i get an audible bleep and the AV inputs come up on screen, i then cycle down to whichever input i wish to select!
in case your remote is different, the button on my remote has a square with a slightly smaller square just overlapping the first square.
hope that helps?
rgds Lee. -
I trasferred pictures over from my computer to my iPhone 5 and now i cannot delete these pictures from my phone, and i cannot work out how to delete them from my phone by the computer as the pictures do not show up in my files on the computer, how can i remove them i have over 400 pictures that need removing?
If you have a Mac with iPhoto, plug the iPhone in and open iPhoto. Choose to import the photos. Once they have been imported, there should be an option to "Remove Imported Photos from Device". Choose this.
-
I recent recieved and Ipod touch model A1213 and i cannot figure out how to get apps on it. I have tried everything i can think of and when i try to update my ipod software it tells me that its already up to date. even though its only 1.1.5. How do i fix it?
You have a 1st generation iPod Touch.
It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...
Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!
-
I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.
The events and projects folders have to be on the top level of the drive for FCP to recognize them.
-
I can't work out how to get facetime on my macbook pro
I can't work out how to get facetime on my macbook pro
FaceTime for Mac: troubleshooting FaceTime:
http://support.apple.com/kb/TS4185?viewlocale=en_US -
I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one game on FaceBook called Farm Town at all, and I keep getting an AVG popup about cookies that I cannot get rid of. These issues are causing me to use Chrome very often even though I like Fox better. I've searched and searched how to get help and cannot find anything. How does one get personal technical help?? These issues do not happen in Chrome at all. Thanks.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
Maybe you are looking for
-
Command in cisco ASA to see security zones
Hi there, A basic question. I can't see security level and zone in show interface ip br command. Is there any command which can be helpful. Regards, Yad Singh
-
Software that is missing and a easy guide for new use
Somtimes, when we have a mp3, it just has the file name as information. So when we upload a whole bunch of mp3 files sorted for {0} until 999, or A until Z. Now when I want to upload it i fireup the zen micromanger explorer thingie, I create a new ma
-
Books and Movies not Synced to iPhone
I used to sync some PDFs from my PC (iTunes) to my iPhone 3GS and there was no issues. However, after I run the sync today, the PDFs are disappear on my phone. They are still in my iTunes' LIBRARY->Books. All checked. During the sync process, I can s
-
Model view (t-code- bd64) configuration issue
1) Is it possible with out distributing customer distribution model in outbound side ,can we receive idoc data in inbound side? 2) after distribution of model view in outbound side is it possibel to create filter techniqe in inbound side? Thanks B
-
I am trying to run this statement Select convert(varchar(10), Max(salesCallDate), 101) From database but this throws an error of Syntax error converting the varchar value 12/15/201 to a column of data type int