Canon 100d photo review issue

Hi,
I got a new Canon 100d recently which was working fine until a week ago. I now have the problem of the photo review (set for 2 secs) not working. Also when I change setting on the dial, I don't see the options on the touch screen anymore, it's just blank. Rarely, they flash for a second and don't come up again when I switch between review and taking pictures using the play button at the bottom as it used to do. Has anyone faced this issue and please post a solution if you have experienced this issue please. Thanks.

Check out solution from dpreview. I am not sure if that would work yet:
http://www.dpreview.com/forums/post/54314903

Similar Messages

How to print with a Canon Compact Photo Printer CP-330?

never found a so hard issue, I'm used to plug&play hardware...
can anyone help me printing from iPhoto or Photoshop to a Canon Compact Photo Printer CP-330?
I tried with Canon's drivers, with Gimp 5, anything... one time the printer started working, then stopped after the first pass (yellow color)... frustrating...
thanks

Hi there,
If you have had no luck with the Canon or Gutenprint drivers then you may have a printer problem. Have you been able to print from it using your memory card directly connected?
If you think/know the printer is okay then I would look at the cups error log to determine why the spool is failing. This log is located in the Console application.
Paul

How to get Camera RAW / Photoshop CS5 to work with Canon 100D?

How to get Camera RAW / Photoshop CS5 to work with Canon 100D? I don't want to by this product again and again...

In what way is ACR not working in Bridge? Is there no right-click Open in Camera Raw available from Bridge, or there is, but the ACR version is less than ACR 6.7.1 or what exactly is the issue?
Also, if you open Photoshop and do Help / About Plug-ins / Camera Raw, is ACR missing from the list, or if not, what version does it say is installed?
You might also want to describe what methods you have tried to correct the issue, since saying you've tried what you've seen posted and they didn't work, isn't really much to go on.

Since upgrading to Maverick my iPhoto does not consistently download my Nikon or my Canon camera photos.

Since upgrading to Maverick my iPhoto does not consistently download my Nikon or my Canon camera photos. Occasionally it will recognize and download photos, most of the time though it hangs in "loading" mode with nothing downloaded. I've unplugged, replugged numerous times, tried a different USB port, tried the two cameras so it's not the camera or line that's the issue, turned the computer off, turned iphoto off, turned everything else off and stil nothing. I need my photos for my work and can't get to them, this seems to be an issue with Maverick AGAIN!!! Is there a fix? HELP! Thanks!

iPhoto Version 9.5.1
Thank you for your help Terence. I had 140 photos on my Nikon, none were viewable in iphoto, in Image Capture 5 were viewable, 135 weren't. I tried importing one to my desktop but it remained static and didn't move over. I just deleted all the photos on my camera, took a fresh photo and after waiting a good 4 minutes finally uploaded to both iphoto and Image Capture. As this took so long for one photo I'm wondering if the memory in my computer would impact the speed. I have 350GB used and 150GB left
By reformat the cards do you mean the flash card in the camera? I don't know how to do that, it's less that 6 months old.

Canon digital photo professional 3.7 does not launch in Lion

Can the community confirm there is a compatability issue with Canons Digital Photo Professional version 3.7. Canon only show support for OS X 10.6
Thanks.

EOS Utility Updater for Mac OS X
Version 2.9.0
Released on 07-10-2010
Description:
EOS Utility is an application that brings together all of the functions required to communicate with the camera. Functions for downloading and displaying images, remote shooting, and camera control of each setting when an EOS DIGITAL camera is connected to a computer have been integrated.
It is linked with DIGITAL Photo Professional, ImageBrowser, Picture Style Editor, but the software has to be the latest version.
Please download the latest version of the software from here.
Digital Photo Professional (3.9.1 or later)
ZoomBrowser EX (6.6 or later)
ImageBrowser (6.6 or later)
Picture Style Editor (1.8 or later)
Changes with EOS Utility 2.9.0
Added Camera support
Supports EOS 60D
Added rating display function.
New Automatically display Quick Preview window check box added to the [Basic Settings] in [Preferences].
Controlling the appearance of the quick preview window after downloading images or shooting remotely.
RAW images can now be used with the overlaid display function.
Peripheral illumination correction data for the EF 70-300mm f/4-5.6L IS USM has been added.
Lens peripheral illumination correction data available for Extender EF 1.4× III or the Extender EF 2× III.
An issue with certain timer values not being able to be set for interval timer shooting has been fixed.
Technical support is no longer available for the following models when used with this version of EOS Utility:
EOS D30, EOS D60, EOS 10D, EOS 20D, EOS 20Da, EOS 5D, EOS 300D DIGITAL, EOS 350D DIGITAL, EOS-1D, EOS-1D Mark II, EOS-1D Mark II N, EOS-1Ds, EOS-1Ds Mark II (it is recommended to use EOS Utility 2.7 with these models)
Compatibility:
Operating system(s): Mac OS X 10.4.x, Mac OS X 10.5.x, Mac OS X 10.6.x
Language(s): English, French, German, Italian, Russian, Spanish

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

Photo viewer issue in N8

when i opened the photo viewer to view photos, it takes more time to load (the loading symbol is rotating for more than minute).This was not the actual opening time before.If i try to exit the viewer, i couldn't,the display is switched off for a while,then i pressed menu key to minimise the application and closed it.
Also i locked the screen using the slider key.but i couldn't unlock the screen using slider key.
does anyone experience the same issue?
Solved!
Go to Solution.

For all those having that "black screen" problem, here's an excerpt from the PR 1.1 changelog:
Images and Camera
* 4053 Confusing behaviour when saving to a file that matches an existing directory
* 6194 Shutter release button does not always work
* 6372 Sometimes photos are not deleted if you delete directly after taking them
* 7060 Sometimes photos are very green
* 7160 Camera app hardcodes and requires FAT partition
* 7394 Some photos are missing EXIF DateTimeOriginal data
* 7758 Daily image counter in photo filenames not incrementing in some cases
* 8087 Photo autorotation issue
* 8310 Image Viewer shows only black screen
* 8698 camera does not have the night mode function
* 8877 Volume buttons should work in camera window when lens cover is not opened
So try PR 1.1.

How do i send my raw photos back to canon digital photo professional from photoshop elements 10 ?

Hi
i am trying to send my raw photos back to canon digital photo professional from photoshop elemnts 10 organizer can someone help me with this please.
Thanks
Rich.

Well, your photos aren't "in" in the organizer, so you can just point DPP at the folders where they reside, or you could set DPP as your external editor for the organizer, if you prefer that. Organizer>Preferences>Use a Supplementarty Editing Application.

HT4356 How to use Canon Selphy Photo Printer (CP900) to print from iPad 3?

How to use Canon Selphy Photo Printer (CP900) to print from iPad 3? I would like to print the photos in my ipad on my Canon Selphy Photo Printer (CP900) which has wifi...

hi
ideally if you want to print from the ipad you should have an airprint enabled printer:
http://support.apple.com/kb/ht4356
however, there are workarounds, you can download a decent third party app to print such as print n share, printcentral or printdirect

Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be?

Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be? Tried shut down on all devices, reboot and the results are the same.

Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be? Tried shut down on all devices, reboot and the results are the same.

Mimicking Canon Digital Photo Professional Picture Styles

I use a Canon 400D and I would like to be able to use Lightroom in such a way so as to be able to mimic the Picture Styles that the Canon Digital Photo Professional software can produce.
The Canon Picture Styles include settings called Standard, Landscape, Portrait, Neutral, and Faithful. I am mostly interested in the colour rendition produced by each of these Picture Styles.
Does anyone have any presets or the like that will enable me to mimic these Picture Styles in Lightroom to at least some degree? The ones called Neutral and Faithful are of the most immediate interest to me.

It may be helpful to know what the Picture styles are doing to your images in the first place.
Standard takes the pictures with a "normal" colour balance,it increases contrast and saturation a little and increases sharpening to 3 on a scale of 0 to 7
Portrait takes the picture with a slight colour bias towards red to enhance the skin tone, it increases contrast and saturation but less so than standard, sharpness is set to 2
Landscape takes the pictures with an increase in the blues and green colours, contrast and saturation are increased more than in standard, sharpness is set to 4
Neutral does nothing much to the image with no increase in saturation, contrast or sharpness which is set to 0. the colours are handled in the same manner as Standard
Faithful is the same as neutral but the colours are based upon a white balance of approximately 5200K, it is designed to minic film in how it handles the colours. It too does not sharpen the image.
More details can be found at http://web.canon.jp/imaging/picturestyle/index.html
I know this does not answer your questions but it at least should start you in the right direction

How do I go about with Canon Digital Photo Professional installing?

When I bought my Canon 40D two years ago, I got a cd "Canon Digital Photo Professional 3.3."
I use that on my windows based computer for manipulation. Now..
I wish to install this software in my Mac Book Air. Since I have Aperture 2.1.4 on this MBA, Do I have to choose any particular directory for this Canon DPP install.
Will Canon DPP work along side the Aperture or work as a plug in for Aperture?

Hi snowshine,
when you launch the DPP installer it will create automatically a folder named Canon Utility in the Application folder...mine did so, I didn't changed the default settings.
After installing DPP from the CD be sure to go to the Canon website and install the upgrade, there are several available, along with Picture Style Editor and a new version of the EOS Utility.
DPP and Aperture are two distinct applications, they can live together, no problem...I have installed DPP and Aperture 2.1.4 on my powerbook G4, DPP and Aperture 3 on both iMac and macbookpro..and everything's fine.
DPP will not act as an Aperture plug-in...but you can set DPP to be the external editor for Aperture if you need so, you can set the external editor program by going in the Aperture Preferences.
Ciao!
Alberto

15"mbpro 4g ram - running canon digtal photo professional - says insufficient memory

I am using a Macbook Pro 15" w/4g ram - while running Canon Digital Photo Professional - "insufficient memory" shows and DPP shuts down. Nothing else is running other than DPP. I was thinking of clearing cache, but not sure how to do that either.

ho 12 gb di ram,10 TB di spazio in 4 HD interni e un Hd ESTERBO FIREWIRE, inoltre il DPP canon non ha impostazioni di memoria come il photoshop.
va in crash soprattutto quando uso lo strumento "pippetta"
spero che qualcuno qui mi possa aiutare,addirittra canon dice:alle volte ci possono essere incompatibilità, ma io ho questo problema dalla versione 3.6 in poi,sia su PC che su Mac!!!

Canon RAW Photos Corrupted in iPhoto

In the last few weeks my Canon RAW photos are importing with some photos corrupted (half good half another photo or unrecognizable), Anyone experiencing a similar problem recently?

It's an SL1 but as the photos import fine into other photo apps I don't believe it's the camera. It (and all of my Canon cameras imported fine prior to the last raw update)

After using Canon Digital Photo Professional Adobe Camera Raw cannot identify my Monitor again.

Wenn eine RAW Bildbearbeitung mit Canon Digital Photo Professional stattgefunden hat, erkennt Camera Raw die Auflösung meines Bildschirms nicht mehr und produziert die Fehlermeldung, das die Auflösung des Bildschirmes zu niedrig wäre. Diese Fehlermeldung kommt dann auch bei bisher nicht aufgerufene und somit nicht bearbeitete .raw. Die gleichen Bilder als .jpeg werden in der richtigen Bildschirmauflösung angezeigt.
Installiere ich Photoshop Elements 13 neu ist alles OK, bis zu dem Zeitpunkt wo ich Canon Digital Photo Professional das erste Mal wieder benutze. Nach der 1. Nutzung erkennt Camera Raw die Auflösung nicht mehr.
Der Fehler ist seit dem letzten Update von Ramera Raw vorhanden und auch mit dem letzten Bugfix von Camera Raw nicht verschwunden.
Hat jemand eine Lösung?

Wenn eine RAW Bildbearbeitung mit Canon Digital Photo Professional stattgefunden hat, erkennt Camera Raw die Auflösung meines Bildschirms nicht mehr und produziert die Fehlermeldung, das die Auflösung des Bildschirmes zu niedrig wäre. Diese Fehlermeldung kommt dann auch bei bisher nicht aufgerufene und somit nicht bearbeitete .raw. Die gleichen Bilder als .jpeg werden in der richtigen Bildschirmauflösung angezeigt.
Installiere ich Photoshop Elements 13 neu ist alles OK, bis zu dem Zeitpunkt wo ich Canon Digital Photo Professional das erste Mal wieder benutze. Nach der 1. Nutzung erkennt Camera Raw die Auflösung nicht mehr.
Der Fehler ist seit dem letzten Update von Ramera Raw vorhanden und auch mit dem letzten Bugfix von Camera Raw nicht verschwunden.
Hat jemand eine Lösung?

Canon 100d photo review issue

Similar Messages

Maybe you are looking for