Canon 2100 Series printing in reverse order

I have a Canon 2100 series -- an MG 2120. When I print things out, they come out in the tray in reverse order -- a six page document will thus have p. 6 on top when I take the stack out. I cannot find a setting on my computer to make things print out in reverse order, so that page one will be on top and I won't have to manually put multipage documents in order. Help?

Hi oldwest,
To change the order in which pages are printed, please follow the steps located at the link below:
PIXMA MG2120 - Changing the Print Order
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

PIXMA 922 print in reverse order?

How do I set my PIXMA 922 to print in reverse order? I've set my MS Word print preferences for reverse order, but the printer starts at page 1.

Hello KLS!
Welcome to the Canon Forums and thanks for your post!
To have a better understanding of your issue, please let everyone know what operating system (Windows Vista/7/8 or Mac OS 10.X) you are using. That way, the community will be able to assist you with suggestions appropriate for your product.
Any other details you'd like to give will only help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks!

MacBook Air can not find canon f8500 series printer on network.

MacBook Air running OS X Yosemite can not find Canon MF8500 series printer on wireless network. AirPrint is turned on at printer. iPhone iOS 8.2 can not AirPrint to printer as well. Recently switched from Verizon to Comcast for internet service, no issues before switch. Tried to add printer via IP address, it was located but could not print to printer.

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Try setting it up as something other than AirPrint. I have seen several posts where that was the problem.

Error on my Canon MX530 series Printer

Hi, I have a Canon MX530 series Printer. The printer works good when I use it to scan or fax but when I try to print a PDF or Excel or whatever that comes from my computer it dosen't want to print (It says ''the printer dosen't respond'' or ''L'imprimante ne repond pas''). Bluetooth works fine, Wifi works fine and when I go in the printer's setting, on my computer, it says it works fine. BUT IT DOSEN'T WANT TO PRINT DOCUMENTS !!!
HELP ME !!!!!!
thank you very much .
David

Hi @jennirvinpest,
Welcome to the HP Forums!
I noticed that you are getting the error message that says your USB is not connected with your HP Photosmart c4200 series.
For further assistance, I will need some more information:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I have a canon mg2100 series printer. I print shipping labels with black ink. I ran out and changed

I have a canon mg2100 series printer. I print shipping labels and use black ink. I ran out and changed the cartridge, now the text is faded looking and I can't read major parts of the label. I did the cleaning print head under control panel and it did fine, but when I try to print again it's still faded. Help!

Hi ttsheppard,
It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon MX390 series Printer - Printing pictures to bright

Hey everybody
So my printer is starting to make problems for some reason The problem is everytime i print picture, it coming out to much bright Althought when im printing a document/text file it turns out just fine..
Someone can maybe help?
Printer: Canon MX390 series Printer
Any help will be much appriciate

It just started to do this like just 2 weeks agoAnd i didnt touched the program im usingthis:

What is "Printer WS" for my Canon MX710 series printer?

In addition to "Canon MX710 series Printer," there is a "Canon MX710 series Printer WS" listed. I never print to the WS one, and would like to remove it from my printer list to reduce the icon options. What is it and why would I want to print to it? Couldn't find a clear answer to this on the net or in this forum. Thanks.

Web Services, and it makes a difference when you try to connect wirelessly to your pc if you have printer WS selected or not.

EPrint always prints in reverse order

Hi,
If I email somthing to my printer it always prints in reverse order, it's very annoying. Is this somthing I can change?
It's a Photosmart Premium Fax C410b
Thanks
Paul

It has been 6 months since the last reply. Any progress on this issue? It would seemingly be simple to add a new option to the same ePrint options screen (which lets you choose color or b&w, for example) to choose between printing the last page first (the current selection) and printing the first page first (what most users would want, especially for very long documents).
If there is a planned date to release this feature, the ability to print first page first, please post the expected date in a reply to this post.

PDF files print in reverse order per page

Hi - I am trying to figure out if this is an adobe issue or a printing issue. It is happening only on this user who is on Adobe 9.1 -everyone else is on 7.0 and they aren't having this issue. So maybe it is a combo.
When the user prints a PDF which was a powerpoint file (she did not creat it was sent via email) she selects 2 per page and hten selects doublesided - landscape and collates staples top left hand side.
File prints doublesided and collates, but what would be slide one would be on the bottom of the page and what would be slide 2 would show at the top. On the back of the 1st page slide 3 is at the the bottom and slide 4 is at the top. Staples at the bottom right.
Printer settings seem ok......there is a selection for order and top to bottom is selected. Reverse order is NOT selected.
Are there any settings in Adobe that would cause this? I have googled and though there are some similar questions no one has answered.
specs:
Windows XP Professional SP3
Adobe 9.1 (latest updates)
Canon IR C5185 (multifunction color)
thanks in advance. Robin

Hey,
Please let me know what is your Reader version.
Open Reader and go to Edit->Preferences->Accessibility and deselect 'Replace Document Colors' option.
If this does not help, then try repairing Adobe Reader and then check.
Let me know.
Regards,
Anubha

How do I install a new Canon MG3500 series printer on my IMac?

How do I install a new Canon MG 3500 series printer on my IMac? When I click on the cd rom icon I get a menu and I do not know what to do then.

For 10.6 see > Mac 101: Printing (Mac OS X v10.6)
For 10.8 see > OS X Mountain Lion: Set up a printer
For 10.9 see > OS X Mavericks: Set up a printer

Printing config sm to be set to print in reverse order. How to fix?

OSX 10.6.3 and MS Word 12.23. When I go to print-to-disk a Word document (i.e. turn it into a PDF using Preview as the default display tool) I get a PDF whose pages are in reverse order. Fine for hard copy output, useless for PDF. Every Print pref or config setting I look for offers no help and, of course, as is completely normal, the Help menu offers nothing either.
I have found an easy fix for a small document — do a "preview" of the document in the Print dialog then drag the pages manually to where they should be. But not every document I work with is small.
Suggestions please.

Oh John, thanks for trying to help. However, I'm not trying to print to any printer. I'm trying to "print-to-disk" i.e. save as a PDF to the desktop so I can later send it as an email attachment.
And by the way, I forgot to mention for you and other kind folk in here — the Word print dialog box does contain a setting Copies & Pages/Page Handling/Page Order with the options "automatic, normal, reverse" but it makes no difference what I select, I still end up with "reverse".
Grrr

HP8600 prints in reverse order from OSX 10.9.5. Connected via wired network.

Its printing back to front. I see how to fix this in Win 7, but there seems to be no option in HP Utilty on the mac; Paper Handling has only 'Tray Lock' and 'Default Tray'.
HP Utility 5.23.4
This question was solved.
View Solution.

Hi @johnjohnjohnjoh , and welcome to the HP Forums!
I see you're looking into page order options. I would like to try and help!
I would recommend utilizing his Apple document on OS X Mavericks: Print pages in reverse order.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Office Jet 4580 prints in reverse order, setting changes won't hold

I have a HP Office Jet 4580 and it keeps printing the last page first and works backwards. I only do one sided pages for printing, no double sided pages.
I have changed the settings as follows:
Printing Preferences
Document Options-Advanced printing features- Enabled changed to Disabled
Layout Options-Page order-Back to front changed to Front to back
I click on "Apply" and/or "OK" for each change.
I have tried the above in every combination possible (i.e. changed to Disabled, but leave Back to front, change to Front to back and leave it Enabled, etc.). Not only does this not change anything, but all settings revert back all by themselves. Once, I saw the Disabled change back to Enabled on its own as I clicked on the "OK" button. Sometimes the "Apply" button is greyed out as well. I make the changes from the Devices and Printers window. I then do the same to double check from a website window by going to File-Print-Preferences to make sure, but it changes back all by itself.
How do I make the changes permanent? I still cannot print page one first on multi-page print requests. The only time I was able to disable the Advanced printing features, it did not print at all. What is wrong with this software??

alian wrote:
read your answer to the same question i wanted to ask. what if i am using an imac computer
For this question on the iMac I would suggest asking in the Mac Printing forum.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My Canon MX310 Series Printer failed as the software "is currently not available from the Software Update Server"? What is the matter with Apple OSX Mountain Lion?

Mountain Lion stopped working with our Canon MX310 Printer? Why is the software not available from the Software Update Server?

The printer and ICA scanner driver is available from Apple. There is probably some other reason why you cannot get the drivers.
You can also get the drivers from Canon.
But reading your post it sounds like you were printing to the MX310 and recently it has stopped printing. Is this the case?

My Canon MP560 series Printer WS

Printer is turned on and bluetooth is working, but print diagogue box says it is offline. What can I try?

Hi Lorchard,
I see that you have a Canon printer. The experts in this forum are familiar with Hp products.
Try posting your question here.

Canon 2100 Series printing in reverse order

Similar Messages

Maybe you are looking for