Canon 24-70mm f2.8 II - profile correction not working

The profile correction in LR5 for the above lens is not working. It appears it's a blank profile with zero distortion data. On the other hand, the profile for the older lens, the canon 24-70mm 2.8 I works well.
Having owned both I know version II of this lens has less distortion, but it's by no means zero across the range. This is one of the most important top of the line lenses for Canon, I'm sure many like me would appreciate this profile corrected.
Thank you.

I also for got to mention that the data in this profile may actually be invalid as the minimum focus distance for that lens is 0.38m
Another more basic reason to regard it with suspicion, would be that it reports a crop factor of 0, which is (of course) impossible.
The fact someone in the community may have rated it 5 out ot 5 for quality, is not exactly authoritative AFAICT .
The profile already installed along with LR is distinguished by being generated with the 5D Mk II, not the 5D Mk III, but IMO this is no reason not to prefer it in other respects. Adobe seem to have done a thorough job of the task here.
It sounds in this case, as if a (apparently invalid) profile that has been downloaded by the user, has taken precedence over the "built-in" one. (These two classes of profile are stored in different file locations with differing user permissions.)
In case you are unaware, the profile that is to be auto-selected against a given Lens ID on the images, can be controlled by the user. Choose "Set as Default" from the profile selector, after manually choosing one there. All images with the same Lens ID, where the profile selection reads "Default" (which is a safe setting to impose across all images), will hereafter adopt a user-corrected choice of profile, all by themsleves.
RP

Similar Messages

Canon file RAW CR2 and mac book pro not working ...?

Canon file RAW CR2 and mac book pro not working ...?
I'm using Digital photo professional software
and i'm using canon camer 5D mark2 and mac book pro 13inch last version
i'm trying to shooting directly by Digital photo professional, Remote shooting but the RAW file con't open by the software or mac preview but with photoshop Cs5 can open
is any one have the same issu ? and how fix it please
What i did :
- update camera RAW
- Update Mac software
- update Digital photo professional
Regards,,
Bandar

Dear all
is there any solution for that ?

GoPro Camera Raw Lens Profile settings not working for image sequence in Photoshop/AE/Premiere CS6

Hey Everyone,
I'm in need of assistance in either Photoshop CS6, After Effects CS6, or Premiere Pro CS6. I just installed the trials after seeing Russell Brown demo the GoPro Lens Profile correction feature in Camera Raw. Basically what I'm looking to do is make adjustments (in Adobe Camera Raw) to a series of still images (shot with the time-lapse mode on the GoPro) and then either export those stills through Photoshop or Bridge to a temporary movie file that will be imported into a timeline (with other video clips), or import the JPG files (with Camera Raw settings) directly into After Effects or Premiere as an image sequence. The latter would be preferable as it'd avoid the extra step of having to render the intermediate/temporary movie file.
Right now, my current workflow for GoPro time-lapses is:
          - use Bridge CS4 to do basic color correction on the still images
          - save those as TIF files
          - run the TIF files through a custom script to have Hugin 2012.0.0 (open source pano stitcher) remove the fisheye distortion
          - open the new TIF image sequence into QuickTime Player 7 (Pro)
          - export the image sequence as a QuickTime movie file
          - import the movie file into Premiere Elements 10 to place on a timeline with other video clips (as Premiere Elements can't handle the sequence(s) of thousands of still images without crashing)
If I can go directly from Bridge to a timeline, it'd save a lot of processing time (and it'd be much nicer to preview the images in Bridge without the fisheye distortion)!
I can prepare the GoPro JPG files through Adobe Camera Raw in Bridge CS6, though when I go to import the JPEG image sequence into Premiere Pro CS6 or After Effects CS6, none of the Camera Raw settings are applied. If I export the Camera Raw files in Bridge CS6 as DNG files (a step I'd really prefer to avoid) and then import the DNG image sequence into After Effects CS6, the Camera Raw settings are applied except for the Lens Profile settings -- I can pick other cameras but not the GoPro lens profiles when the DNG image sequence loads in After Effects. It also appears that once I open the DNG files in After Effects CS6, I can no longer access the GoPro Lens Profile in Adobe Bridge CS6 -- the list changes to the same list I get in After Effects. Premiere Pro CS6 doesn't let me import the DNG files at all. I've also tried to import the JPG files (as well as the converted DNG files) into an image sequence in Photoshop CS6, though it doesn't allow me to do so (the Image Sequence checkbox is grayed out after I apply the Camera Raw settings in Bridge).
There could be an issue going on with different Camera Raw versions. I didn't have Premiere Pro CS6 installed during my initial testing, though now do notice that the Camera Raw dialog in Bridge CS6 only lets me choose compatibility up to "Camera Raw 7.1 and later" when I choose to export the files as DNG. I thought Camera Raw 8.2 was an option there a couple days ago when I only had installed Photoshop CS6 and After Effects CS6 (though am not 100% certain).
Please let me know if there is some workaround to get the GoPro lens profile Camera Raw corrections applied in an image sequence in one of the Adobe CS6 products (without having to export the files as temporary TIF or JPG files out of Camera Raw). I'd greatly prefer to shorten my current workflow for these files. (I just updated the CS6 trials and have tested all three programs again though I still get the same results described above.)
Does Lightroom 5 have any option to export Camera Raw image sequences as movie files (or any other feature that might help in simplifying my current workflow)? I can't install the trial right now as it's not compatible with OS X 10.6.8. I'd consider upgrading OS X if I knew Lightroom 5 would do what I need, though am waiting for any potential color profile issues to be resolved in OS X 10.9.
I can open the image sequence in Photoshop CS6 if no Camera Raw settings are applied and then use the Lens Correction Filter to apply the GoPro Lens Profile settings, though I really prefer the Camera Raw interface in Bridge for tweaking image settings. As soon as I apply Camera Raw settings to the first image, Photoshop CS6 grays out the image sequence checkbox.
If there isn't a way to take Camera Raw files straight from Adobe Bridge to a timeline, I may stick with my current workflow using CS4 and see what I can do to better automate some of the steps as the TIF export in Bridge, fisheye distortion removal in Hugin, and render in QuickTime Player all take quite a while. I won't mind waiting for all the processing if I can set it and check back on it in later the next day when it's fully complete. Is there a way to have Adobe ExtendScript execute an external shell command (i.e.: a command I could type into the bash shell in Terminal in OS X)? If not, is there a way to call/run an ExtendScript script from the command line and pass a parameter to it that my custom script could use?
Thanks in advance,
Mark

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

Lens profile was not working!

i generated lens profile data lcp, with Canon EOS-1Ds Mark III, samyang f=14mm lens.
it is good working on at the same camera and nikon D3 shooting images.
but at the Canon EOS-5D Mark Ⅱ shooting images (these are CR2 format) it is not working !!
what is the reason? is it different camera or different image format?

canon 5D mark ll (poor)
canon EOS 1Ds Mark lll , nikon D3
it's a good working !!

Profile Manager not working at all, psql cannot connect to server??

Upgraded existing system to Mavericks. Everything was running fine with Mountain Lion, everything fine on my test server too. After upgrade to Server 3.0, Profile Manager does not work. It cannot be configured.
After reading through posts here and trying their suggestions I find that psql cannot connect to the server and get this error at every turn.
psql: could not connect to server: No such file or directory
          Is the server running locally and accepting
          connections on Unix domain socket "/Library/Server/ProfileManager/Config/var/PostgreSQL/.s.PGSQL.5432"?
Activity monitor shows it's running, also checked network utility to make sure I could get a connection through 127.0.0.1 on port 5432. It's good too.
Also in the migration_tool.log file the last entry backs up this error.
STDERR | psql: could not connect to server: No such file or directory
            |           Is the server running locally and accepting
            |           connections on Unix domain socket "/Library/Server/ProfileManager/Config/var/PostgreSQL/.s.PGSQL.5432"?
Where do I start? I think getting psql working is a big first step....

Thanks Tim,
I manage several different systems so I started comparing the one that doesn't work to one that does work.
On the one that's malfunctioning, this is a message I see often:
Is the server running locally and accepting
          connections on Unix domain socket "/Library/Server/ProfileManager/Config/var/PostgreSQL/.s.PGSQL.5432"?
So I checked to see what's in the directory /Library/Server/ProfileManager/Config/var/PostgreSQL/ and got this result.
sudo ls -la /Library/Server/ProfileManager/Config/var/PostgreSQL/
total 0
drwxr-xr-x 2 _devicemgr _devicemgr   68 Dec 4 09:31 .
drwxr-xr-x 3 _devicemgr _devicemgr 102 Nov 13 06:13 ..
An Obviously empty directory.
Now on the server that's working this is what I get.
sudo ls -la /Library/Server/ProfileManager/Config/var/PostgreSQL/
Password:
total 16
drwxr-xr-x 6 _devicemgr _devicemgr 204 Nov 22 17:47 .
drwxr-xr-x 8 _devicemgr _devicemgr 272 Nov 22 17:48 ..
srwxrwx--- 1 _devicemgr _devicemgr    0 Dec 4 09:20 .s.PGSQL.5432
-rw------- 1 _devicemgr _devicemgr 139 Dec 4 09:20 .s.PGSQL.5432.lock
srw-rw-rw- 1 _devicemgr _devicemgr    0 Nov 22 17:47 .xpg.skt
lrwxr-xr-x 1 _devicemgr _devicemgr    3 Nov 22 17:47 .xpg.skt.lock -> 164
Obviously something is missing on the one that's malfunctioning.
I think that pgsql isn't running correctly and like you said Apple moved some things and we don't know where all of them went.
Any suggestions anybody?

Lens Distortion correction not working on tonemapped jpg files

I have a series of photos exported from Lightroom 2 that I HDR tonemapped in Photomatix. Unfortunately after a disk failure I do not have the original RAW files and only have the 100% jpg saved tonemapped files from photomatix.
Now that Lightroom 3 is out I wanted to try some lens distortion correction on them. I imported them and immediately noticed after enabling the lens profile corrections and choosing my lens that although chromatic arberration and vignetting works there is no effect at all with the distortion correction! Even when I slide the slider from one side to the other absolutely nothing changes.
I tried it on other raw files and it works fines. I tried it on jpgs that I have that have not been combined and tonemapped in photomatix and they work fine. It is only the jpgs created from photomatix.
Is there something about the exif data that I am not considering or any other explanation as to why the photomatix jpgs won't take any distortion correction? thanks

If it's working for other jpg's, (and I though it didn't work on jpgs, so who knows?) then it does sound like the photomatrix program is wiping out the exif information that is needed.
Did you try using a viewer to look at the exif info, both before and after, to compare? Maybe there is a setting (in photomatrix) that you are missing when you save data?
Sorry, don't know photomatrix, so just offering generic ideas in the hopes it sheds light..
Cheers!

Roaming profiles did not work with Novell client

I've Problems with roaming profiles.
It is perhaps not a Novell problem but anything with windows rights?
We use ZCM11: (Server: SLES11 SP1)
Client new PC with a freshly installed Windows7, all updates.
(Only Turn on file and printer sharing, anything else default, no virusscanner)
The pre-agent has been installed and then the the Novell Client 2SP1 IR7
The PC gets a "Dynamic Local User Policy" with the settings:
- Use the credentials of the user source
- (Manage existing user account - but we have none there)
- Volatile user (with no cache, meaning that the user is immediately deleted ... We have also tested with cache.)
- e-dir user should be only member of Users
The users from edir get a Roaming Profile Policy with:
- Store user profile in user's Home Directory. (which is on the OES/SLES server)
---- results ----
If the user has no centrally stored profile, then he can log on but just once!
(if "Enable Volatile User cache" also several times to the same PC)
If the user already has a stored profile, he can not log on Error: "The Group Policy client service failed the logon Access is denied"
In my view, the following happens. W7 create the user locally and want's put in the settings from a central profile in the local
Profile and can not do that.
Only when no "central profile" is there in the homedir, or if this profile does not contain the file ntuser.dat, the user can log in locally.
However, no files are used from te saved profile, for instance from the saved desktop.
I can not imagine that anyone around the world with ZCM11 on a SLES/OES Server don't use the Novell client and raoming profiles
It must therefore give a simple trick to solve the problem.
But which one? Can some one here help me?

Alix,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Secondary color correction not working in Premiere CC

Greetings,
I'm unable to build secondary color correction masks in Three Way Color Corrector, RGB Curves etc in the current version of Premiere CC.
In any of these plugins, when I check "show mask" I get the usual white slate filling the frame. But when I use the color picker to make a selection the whole frame stays white. It appears that I'm making selections but it's not building the mask for some reason. When making an extreme color change I can see that the mask is not building as it affects the whole frame.
This started after upgrading to CC. I've recently updated to the most up to date version (yesterday) and am still having the same problem.
Premiere CC 2014.1 Release
8.1.0 (81) Build
Macbook Pro Retina, 15" Late 2013
2Gh Intel Core i7
8Gb
Intel Iris Pro 1536Mb
Yosemite Version 10.10
*note-my Colleague is not having this problem, he's working on the same OS and same CC build but he has an Imac. So I'm guessing this problem is unique to my hardware config.
Anybody else have this problem or know of a fix?

I have the same Problem new MAC OS Premier Pro CC or Premier Pro CS6 both have an issue with the Title Tool. If you open the title tool and try to make color changes or change size of the font it sticks at the default color and default font. SOmetimes the title tool will work and then when I exit it's back to the default first type location, default font and default color. Sometimes it will not even let me exit the Title Tool.
Please help I have Projects I'm working on Deadlines and I pay a monthly Fee for Software that works and it's not working.
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          6-Core Intel Xeon
Processor Speed:          2.4 GHz
Number of Processors:          2
Total Number of Cores:          12
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          12 MB
Memory:          16 GB
Software OS X 10.9 (13A603)
Graphics ATI Radeon HD 5770 1024 MB

B1 DB Profiler does not work

Hello devs,
I have been trying to use B1TE to optimize our addon. But the B1 Db profiler is not running properly.
Scenario:
SAP Business One 9.0 PL 15 32bits;
MSSQL Server 2008;
MS Windows Server 2008 R2 (hosting the SQL Server instance)
MS Windows 7 (hosting SAP Business One Server and client)
B1TESetup9.0_32bits (v 2.6)
When I run B1 DB Profiler Window application, no errors happen. I have copied the necessary code into the stored procedure SBO_SP_PostTransactionNotice. When I run the test addon by clicking the T button, a message pops up informing that if no lines appear in the grid, I should check the aforementioned stored procedure.
I have enabled OAP using this:
sp_configure 'show advanced options', 1
GO
RECONFIGURE;
GO
sp_configure 'Ole Automation Procedures', 1
GO
RECONFIGURE;
GO
sp_configure 'show advanced options', 1
GO
RECONFIGURE;
I tryed copying the stored procedure code (only the content in SBO_SP_PostTransactionNotice.txt) into the stored procedure SBO_SP_TransactionNotification and the following error pops up:
That is the content of the stored procedures:
SBO_SP_TransactionNotification
USE [SBO_CertTest]
GO
/****** Object: StoredProcedure [dbo].[SBO_SP_TransactionNotification]    Script Date: 03/09/2015 09:00:56 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20),                 -- SBO Object Type
@transaction_type nchar(1),            -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int                -- Result (0 for no error)
declare @error_message nvarchar (200)         -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
--    ADD    YOUR    CODE    HERE
DECLARE @object int --declare the object variable
DECLARE @hresult int --declare the hresult variable
EXEC @hresult = sp_OACreate 'B1DbProfilerCOM.Profiler', @object OUT
EXEC @hresult = sp_OAMethod @object, logDb, NULL,
    @object_type,
    @transaction_type,
    @num_of_cols_in_key,
    @list_of_key_cols_tab_del,
    @list_of_cols_val_tab_del
IF @hresult <> 0
   BEGIN
    EXEC sp_OAGetErrorInfo @object
    RETURN
   END
-- Select the return values
select @error, @error_message
end
SBO_SP_PostTransactionNotice
USE [SBO_CertTest]
GO
/****** Object: StoredProcedure [dbo].[SBO_SP_PostTransactionNotice]    Script Date: 03/09/2015 09:32:40 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER proc [dbo].[SBO_SP_PostTransactionNotice]
@object_type nvarchar(20),                 -- SBO Object Type
@transaction_type nchar(1),            -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int                -- Result (0 for no error)
declare @error_message nvarchar (200)         -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
--    ADD    YOUR    CODE    HERE
DECLARE @object int --declare the object variable
DECLARE @hresult int --declare the hresult variable
EXEC @hresult = sp_OACreate 'B1DbProfilerCOM.Profiler', @object OUT
EXEC @hresult = sp_OAMethod @object, logDb, NULL,
    @object_type,
    @transaction_type,
    @num_of_cols_in_key,
    @list_of_key_cols_tab_del,
    @list_of_cols_val_tab_del
IF @hresult <> 0
   BEGIN
    EXEC sp_OAGetErrorInfo @object
    RETURN
   END
-- Select the return values
select @error, @error_message
end
What else am I missing?

Bruno,
The B1TE Help documentation for the DB Profiler states to change only "
Insert the statements contained in the SBO_SP_PostTransactionNotice.txt file (C:\Program Files\SAP\SAP
Business One Test Environment\B1DbProfiler) into the SBO_SP_PostTransactionNotice
stored procedure.
2.      Use the SQL Server Enterprise Manager or .NET
          Server Explorer to edit the SBO_SP_PostTransactionNotice Stored Procedure of
          your current Company Database.
Why did you add the code also to the SBO_SP_TransactionNotification?
Eddy

HCP debugging and profiling does not work anymore

Hi,
starting HCP in debug or profile mode does not work anymore.
Last week I developed a small java app and could debug it on HCP. Today I updated the HCP Tools eclipse plugins and now I can't change the state of the server to debug or profile. Of course the debugger does then not stop at my breakpoints.
Any hints?
Regards Helmut

Hi Alex,
as you can see on the screenshots the option is available. When I start in Debug Mode the state changes to started instead of debugging. Setting breakpoints then has no effect.
1. Start in Debug Mode
2. Server not started in Debug Mode
Regards Helmut

Profile manager not working? iOS 6

I have mac mini working as Mountain Lion Server 10.8.2, Server.app 2.1 (upgraded from 10.7.4 Server)
(All services are using 3rd party ssl certificates)
previously enrolled devices are getting push changes.
I got a new iphone 4 (service upgrade) with ios6, and when i enroll it, it gets a name: New Device in profile manager
Not the name that it has been named. And the push settings arent pushed. Other devices do get changes.
I got the right name for the iphone to profile manager, by filling the data as a place holder device. Then it got the
right name for the device. But push payloads are not working.

the device logs gets 500 error code, you van see this in iphone configuration utility or in apple configurator.
as follows in console:
"US Desc: A transaction with the server at “https://server.com/devicemanagement/api/device/connect” has failed with the status “500”.
Domain : MCHTTPTransactionErrorDomain
Code : 23001
Type : MCFatalError

The basics on how to handle profiles correctly when working with LAB colors?

Hello,
I need to incorporate several blocks of color into an InDesign document. I have the colors in a list as LAB values. The document will be printed, and I have the profile for the printer/paper combo we plan to use.
Would one of you be willing to walk me through the Working Space, Color Management Policies, and Assign/Convert Profile setings that I should use to get the best result?
And, specifically - assuming I am using the Color Panel - not swatches - to color in the blocks: What settings should I use inorder to allow me to rely on the provided "out-of-gamut" warning to alert me if I am attempting to use a color that won't print correctly? I don't care if it is out-of-gamut for the purposes of my display - it is whether it is out-ouf-gamut for the purposes of printing that I want to know about.

Do the LAB colors look the same on the monitor regardless of which RGB
you are using? For example, if I switched from sRGB to Adobe RGB, would
the colors which had been specified in LAB still look the same?
Yes. But keep in mind using Lab doesn't let you get around having a well calibrated and profiled monitor. Lab is device independant so it doesn't have a profile, but in order to display it needs to be converted into your monitor's RGB space via your monitor profile, so the accuracy of your monitor profile is important if you are relying on the soft proof.
Is that what is called "Convert to Profile" in InDesign?
When you export to PDF you have the option to force all colors into one destination space (or not). In the Output tab of the Export dialog you can set your Destination to your printer's CMYK profile and the choose Convert to Destination as Color Conversion. That setting will convert your Lab colors to CMYK during the export. Convert to Profile... in the Edit menu let's you convert document RGB or CMYK colors from one RGB or CMYK space to another. It would have no effect on Lab colors.
Is the out-of-gamut warning only for CMYK?
Yes, it's using your document's CMYK space as the gamut
So if I specify a color using LAB which is out-of-gamut for the RGB
space I am using but in-gamut for my CMYK profile, I will NOT see a
warning?
Right. That would be unusual, but the Lab value for 100% cyan in your printer's CMYK space is likely out of gamut to any RGB space. But your destination is CMYK so that's the gamut you care about.

I have Lightroom 5 downloaded from the creative cloud. Lens profiles are not working for raw files. Canon 50D with EFS 10-22, EF 100 f2.8L macro and other Canon lens. None showing in lens profiles

When I first downloaded Lightroom 5 from the Creative Cloud lens profiles were working OK
Now it does not seem to recognize my camera - Canon 50D and lens - various Canon EF and EFS - All were recognized previously

I don't use these features, since I don't have such a cam, but could it be that you may need to input settings for filmback and distance of the lens mount somewhere? If the program operated based on wrong assumprions, the best profile in the world would be wrong...
Mylenium

Substitution Profile is not working correctly

I have a scenario where a user has to set up substitution to process certain workitems but not all workitems so we have created a substitution profile but it does not seem to be working for us.
We have configured through IMG the following
Task class in table T77TC
Substitution Profile in table T77RP
We have linked the profile and the class in T77RO
We have assigned this classification available in additional data to the Task type workflow template through transaction PFTC
I have created an active substitute for this profile in HRUS_D2 but the other employee does not see any of my workitems. Any help is appreciated.
Also I have created an active substitute without the profile for another employee and they can see my tasks.
Thank you very much,
Susan Thomas

Hi Susan Thomas
check the below article and confirm whether all the settings are done as mentioned in the document
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/109d2ea2-035c-2c10-06be-f6165ba7af11
If still you having problem , pls revert
Regards
Arumugam

User Profile Sync not working after March CU

It appears that since installing the March CU for Sharepoint 2013, the user profile service is no longer working correctly. The status for user syncronization is always in a "Stopping" phase and the event logs are reporting the following every
hour... Do I have to take out the entire service and reinstall it, or is their a way to fix it?
Log Name:      Application
Source:        FIMSynchronizationService
Date:          3/28/2013 1:40:05 PM
Event ID:      6324
Task Category: Server
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      xxxx.xxxxxx.com
Description:
The server encountered an unexpected error and stopped.
"BAIL: MMS(2072): sql.cpp(8490): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(2072): sql.cpp(8533): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(2072): server.cpp(260): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(2072): server.cpp(3860): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(2072): service.cpp(1539): 0x80231334 (The sql connection string has unsupported values.)
ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2145184972. This is retry number 0.
BAIL: MMS(2072): clrhost.cpp(283): 0x80131022
BAIL: MMS(2072): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(2072): server.cpp(251): 0x80131022
BAIL: MMS(2072): server.cpp(3860): 0x80131022
BAIL: MMS(2072): service.cpp(1539): 0x80131022
ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 1.
BAIL: MMS(2072): clrhost.cpp(283): 0x80131022
BAIL: MMS(2072): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(2072): server.cpp(251): 0x80131022
BAIL: MMS(2072): server.cpp(3860): 0x80131022
BAIL: MMS(2072): service.cpp(1539): 0x80131022
ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 2.
BAIL: MMS(2072): clrhost.cpp(283): 0x80131022
BAIL: MMS(2072): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(2072): server.cpp(251): 0x80131022
BAIL: MMS(2072): server.cpp(3860): 0x80131022
BAIL: MMS(2072): service.cpp(1539): 0x80131022
ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 3.
BAIL: MMS(2072): service.cpp(1002): 0x80131022
Forefront Identity Manager 4.0.2450.49"

I had rebooted days ago... I have rebooted a couple of times today before posting here... Didn't help...
I found a procedure on another link that looked like it would reset the syncronization database, but that doesn't appear to have worked out any better. The procedure was a follows:
$syncDBType = "Microsoft.Office.Server.Administration.SynchronizationDatabase"
$upaSAType = "User Profile Service Application"
$syncDB = Get-SPDatabase | where-object {$_.Type -eq $syncDBType}
$upa = Get-SPServiceApplication | where-object {$_.TypeName -eq $upaSAType}
$syncDB.Unprovision()
$syncDB.Status = "Offline"
$upa.ResetSynchronizationMachine()
$upa.ResetSynchronizationDatabase()
$syncDB.Provision()
restart-service SPTimerV4
This appears to have completely reset the syncronization database to the point where I don't even see tables and views any more in that database. That sounded good, but the "User Profile Synchronization Service" wont start and it doesn't appear to be able
to provision the database. I am trying to start the service using the farm account and I know the password is good...

Canon 24-70mm f2.8 II - profile correction not working

Similar Messages

Maybe you are looking for