Canon 3.2 not working in 10.6.4

I am unable to get Canon's Photostitch 3.2 to not crash upon opening. Is there a viable solution for this problem? It (I am told) is a great tool that I need, and would prefer not to have to buy another program because of a Snow Leopard failure. Please offer some solution.

Looking at the Canon web site, the v3.2.1 Updater for Mac OS X still only quotes Mac OS X 10. to 10.5 as being the supported operating systems. So as has been suggested I would check with Canon when they expect to have a version available that officially supports Mac OS X 10.6.

Similar Messages

  • Canon pixma mp600R not working after security update

    Hi,
    yesterday apple software update installed the last updates for my intel imac with 10.4.11. After that my canon printer is not working via airport. USB works fine. the networking utility sends and receive pings to the printer.
    Tried to reinstall with the canon network tool. after checking of the airport signal (good) the printer utility open but I cannot add my printer, because its not shown.
    does have anyone a idea to get the printer working wireless again?
    P.S. My ibook prints pretty fine wireless to the canon. So its not a airport problem.

    Hi Martin, try this...
    Safe Boot off the HD & use Disk Utility from there to Repair Permissions, reboot once more.
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    Reinstall the Driver if need be.
    Fix Permission before & after any SW update.

  • My canon printer does not work with firefox12

    my canon printer does not work firefox 12 edition

    Try to reset the print prefs.
    See:
    *http://kb.mozillazine.org/Problems_printing_web_pages
    *https://support.mozilla.org/kb/Printing+a+web+page
    There are other things that need your attention.
    Please Update to the latest Firefox 17.0.x version.<br />
    The Firefox Firefox 12.0 version that you currently run is no longer supported with security updates
    *Help > About Firefox
    *https://support.mozilla.org/kb/update-firefox-latest-version

  • I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

    I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

    You need to reinstall the printer driver, and set up the printer on the new hard drive.
    The Canon site should have the driver. Download it and install.
    Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions.

  • Canon IR C2380i not working after upgrading to 10.9

    Hi,
    I was wondering if any one knows a work around to get canon ir c2380i working on th emac, i have had a few issues with this but now afetr the upgrade it is no longer working.
    I have contacted Canon and i have updated all driver yet nothing is working
    The printer worked fine before the upgrade (but it took a while to get this going)
    The printer is a network priniter with Fixed ip adress
    Any help would be much apreciated.
    how can i big up my Apple when its not working.. Come on apple please dont become like window and relese with errors its just pants it why we pay the extra right ?

    Have you looked at the other Canon posts here and tried to download the driver from the Australian Canon site? There are also some posts in the "More Like This" sidebar.
    http://support-au.canon.com.au/contents/AU/EN/0100491502.html
    Hope this helps.

  • Canon Printer scanner not working

    I have a Canon Imaginclass laser multifunction printer, but the scanner does not work. Can anyone give me a detail steps to show me how to fix this problem?

    What is the error message?
    Try resetting the printing system.
    Reset Printing System

  • Canon Lide 80 - not working after 10.5.8 update

    Hi,
    Wondered if anyone has a workaround for getting a Canon Lide 80 scanner to scan using Photoshop Elements 6, it worked in OS X v10.5.7 previously as I copied the latest ScanGear CS 7.2X plugin into the Photoshop Elements plug-in folder then ran Elements through Rosetta and it scanned with no problems however this now does not work.
    The plug-in is still selectable when using PSE6 but I get the following message "The necessary file could be missing or damaged, or the settings are incorrect. Reinstall the scanner driver. Scanner driver will be closed"
    I have made sure I have the latest plug-in but to no avail. Any assistance would be greatly appreciated.
    Cheers
    Andrew

    Can't speak specifically to Photoshop Elements, but my LiDE 80 works fine on 10.5.8 using both Canon's CanoScan application as well as VueScan, both of which use the same plug-in architecture as Photoshop.
    This is on a MacBook (Santa Rosa) after updating to Leopard 10.5.8 (it was previously running 10.5.4, where the scanner also worked).
    I am using the latest ScanGear driver and CanoScan Toolbox installs from Canon's US support website, where the
    filenames are LiDE80_7252MXEN.dmg and CSTb4130MXE.dmg respectively (the Canon site shows an update date of July '09, but in actuality none of the files have been updated since 2005).
    I didn't do anything special -- the scanner continued working normally after the system update.
    What I'd try is remove the driver (just to be safe, download & use Canon's driver removal utility from the same download page), search & nuke any files called Scangear on the machine (I'd also remove CanoScan if you have it installed), then reinstall from scratch.

  • Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb.  Any suggestions?  Thanks. LL

    My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB.  Have had no previous issues with printing, scanning or faxing.  When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the  on my MAC which shows the same problem.  All of the color and black cartridges are new.
    The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
    Any suggestions?  Could this simply be a compatibility problem?  I'd sure like to keep my Canon printer.
    Thanks,  LL

    Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
    Also an FYI - this is the Mavericks forum. The Yosemite forum is here

  • Canon MG3550 is not working correctly

    Hello,
    I have recently bought Canon MG3550. I installed the driver etc but the printer is not working correctly. Sometimes it prints without any issues but other times it:
    - does not pick the printer - saying it's offline even though it's not (this is from laptop, iPad, phone...not just from one device)
    - does not print - the error message appears after a while saying that the printer is not responding
    - prints half of the page...or just picks up a paper but doesn't print at all
    I tried to de-install and re-install the driver etc. but it did not help. The printer is still behaving the same unpredictable way.
    Do you have any ideas how to solve it? It is a faulty device or am I doing something wrong? 
    Thank you

    Your tags show iPad. You need the iPad 3 or newer in order to have Siri. What iPad do you have?
    There are a number of apps that are compatible with Word....Documents to Go, Pages, Quick Office Pro .... You need an app that will read, save and Word files on the iPad and if you don't have such an app, all that you can do is email the file and read it in the email. You will not be able to save or edit the files.
    After you download one of this apps, you can use email, DropBox, and IOS file sharing in order to transfer the documents back and forth. You can use iCloud as described above with Pages or any other app that works with iCloud.
    Read this to learn more about file sharing.
    http://support.apple.com/kb/HT4094

  • Canon i550 is not working. 7 orange flashing lights

    Our Canon i550 stopped working.  Green light followed by 7 flashing orange lights.  I cleaned out printer head and all ink cartridges are new.  I have tried resetting printer and still not working.  

    Uninstall the device using Canon's instructions. Then assuming you are using a USB connection to connect it to your computer restart the computer in Safe Mode to clear some caches. Then restart the computer normally. Then connect the printer to the computer via USB and turn on the printer. The printer should then be seen in the Print & Scan preferences. If not run Software Update. To scan use Image Capture (it's preloaded on your computer) and scan using the Image Capture tool.
    If you still have trouble then follow the instructions in Printing Overview OS X Lion.

  • Canon MP600 scanner not working - help!!

    I have a Canon MP600 scanner/copier/printer. It's connected to my MacBook which I purchased in Sept 2007. I have 10.5.2 on my computer. Computer's HD failed after 4 months, then flex cable (BUS cable?) had to be replaced about a week ago. Scanner worked fine before 10.5.2 and the hard driver failing.
    Scanner scans the document, but a screen pops up on the computer that says "Unable to save file. The system cannot find the path specified."
    I've updated and installed all the drivers from Canon's website. I cannot figure out what is causing the problem, or how to rectify it?
    Please offer any help you can. Thanks!

    Hi all,
    I had the same issue with a Canon MP600. Printing
    did work, but it refused to scan with scanner not connected
    message.
    I updated all the drivers, no luck.
    As a last resort, I changed the USB cable to a certified
    USB 2.0 high speed one and it started scanning
    I would suggest to try the following procedures:
    - find a USB high speed cable
    - connect just the mac and the printer
    - test
    If it it works it might be the old cable or some
    interference with another USB device.
    Reconnecting one at a time the other devices will
    be the final step .
    If it does not work also after having updated the
    drivers and standalone with a Hi-speed USB cable
    I have no additional clues, sorry.
    Hope it helps

  • Canon MG5140 scanner not working

    Please help me, I have just recently upgraded from a late 2008 model MBP, to a new 15" Retina MBP.
    I have a Canon Pixma MG5140 multifuction printer/scanner.  On the old MBP everything worked fine.
    Yet on the new Retina machine the scanning function does not work. The printing function works fine, just no scanning
    I went onto the Canon website and down loaded the most current software and device drivers, but to no avail the machine stil won't scan. A dialougue box, opens up saying that the device is not connected or the drivers are incorrect.
    Does anyone have any advice regarding this problem?  Would appreciate any help.
    Thanks

    Check that the driver is up to date.
    Canon drivers for Mavericks:
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp160#DriversAndSoftware

  • Canon S750 printer not working after upgrading to Leopard

    Leopard is brilliant, and everything works after I upgraded from Tiger except... my Canon S750 printer gives error messages and fails to print. This is VERY annoying. I can't seem to find an S750 driver for OS X 10.5 on Canon's web site. So, what to do next? Just wait, and keep logging on to Canon's web site in the hope that, one day, the driver will be there? I can't find any official statement from Canon as to what they're up to. Are they currently working on drivers for Leopard? Do they have any projected "release dates"? Are they at all interested, or would they prefer to sell me another printer perhaps? Any information on what I should do now will be gratefully received. Thanks.

    UPDATE... my S750 printer has suddenly started to print OK! This is rather bizarre, since I've not re-booted, haven't un-installed/re-installed the printer. End of topic!

  • Adobe Acrobat Pro 9.4.2 and new Canon 9000F Scanner Not Working

    Hi, folks I am pulling my hair out trying to get Acrobat to recognize the Canon 9000F scanner. I have downloaded the latest driver and still I am unable to get to see the darn thing.
    The scanner works great in the Canon scanner software and other devices but not Acrobat.
    When you go into Acrobat and do a Create a pdf and select scanner all are greyed out except custom and profiles, I have fiddled here with no luck.
    I had a HP scanner before and all options where there and worked great.
    Anyone know of any fixes for this?
    Cheers

    The scanner is just a few months old and it has never worked with Acrobat. The scanner works great with other apps like Photoshop CS5 as a WIA device, it also works in Windows native apps like the Windows Fax and Scan application but not under Acrobat 9.4.2. I use Win 7 64bit system.
    There is the WIA Canoscan  and a Canoscan 9000f listed and when you select either of these you get these messages.
    also here is the twacker result with 2 entries

  • Canon Pixma MP495 not working with mini

    I'm trying to use the scanner on my Canon Pixma MP495 with my Mac Mini.  The printer works okay, but when I click on the scanner, I get an error that says reopeon or okay - MP Navigator EX quit unexpectedly.

    I would like to add I might have the problem solved.
    I found an older Windows forum from 2009 where another person had a similar problem and it was suggested to use the add 'local printer'. Of course, the wizard set it up so not sure what it did but I did what they suggested and the scanner finally works. 
    Also, when I went to print something, the preview picture came up and the door to the printer popped open but one of my ink cartridges is out so it couldn't print.....bummer.
    At least I never got the 'driver not installed correctly' message.
    As soon as I get a chance to get some more ink and try it, I'll post the results.
    **fingers crossed it works**
    Thanks~
    squirt11

  • Canon MG5250 Scanner not working with OSX 10.7.2 HELP PLEASE

    I have tried to get my canon mg5252 multifunction to scan, im using OSX Lion 10.7.2, I have tried downloading the canon drivers (mp 4.0.3 and ica driver 1.9.0) but still cant get it to work !
    Any help is greatly appreciated !
    Thanks
    sc

    Uninstall the device using Canon's instructions. Then assuming you are using a USB connection to connect it to your computer restart the computer in Safe Mode to clear some caches. Then restart the computer normally. Then connect the printer to the computer via USB and turn on the printer. The printer should then be seen in the Print & Scan preferences. If not run Software Update. To scan use Image Capture (it's preloaded on your computer) and scan using the Image Capture tool.
    If you still have trouble then follow the instructions in Printing Overview OS X Lion.

Maybe you are looking for