Canon 3000 stopped working, can't install drivers.

So, I've been using a canon 3000 directly attached through usb to my G4 for about two years now. Last week, all of a sudden, whenever I tried to print i would get a message on my print window that the jobs were stopped. The job would appear on the printer window but there would be a "job stopped" on the status. Whenever I tried starting the job from the menu, it would go into the progress bar for a few seconds and then go back to "job stopped". So i decided to delete the printer which i did through the printing prefrences panel and tried to reinstall the driver to see if that would help. When I tried reinstalling the driver the installer shows me the eula and then just gets stuck on "select destination" part, you know, where u select on what hd to install the driver. I get a little progress wheel that never stops and doesn't let me choose which hd to install the driver in. Yesterday I left my installer on in the morning, went to work and came back in the afternoon... roughly about 10 hours, and the progress wheel was still spinning as if the computer was still searching for a suitable place to put the driver. Any suggestions? btw, I've been reading that 10.4.11, the os I have, has a lot of problems with printers... wondering if that might be the case?

Your problem may be related to the .11 update but I don't believe that 10.4.11 has any particular problem with printers, most of my office Mac's are running this version and it has been one of the more stable releases (we had more trouble with .10). Your problem could be related to a number of things, most likely the disc permissions, so I would use the following steps to see if this can resolve your installation issue.
1. Open the Printer Setup Utility and delete the iP3000 from the printer list (if you see it). Then click on Printer Setup Utility and select Reset Printing System.
2. Close the Printer Setup Utility.
3. Go to Library > Printers > Canon and delete the contents of the BJPrinters folder.
4. Go to Library > Receipts and delete the file Canon iP3000 xxx.pkg
5. Empty the Trash
6. Unplug the Canon USB printer cable and restart the Mac
7. Install the latest version of the Canon driver. Looking at the Canon Au web site the latest version is 4.8.3.
8. Once the driver installation is complete, go to Applications > Utilities and open Disk Utility. Run the Repair Disk Permissions option.
9. When the Repair Disk is complete, open the Printer Setup Utility again and click Add.
10. Select the Default Browser view and select the Canon printer connected via the USB port. The Print Using menu should automatically change to Canon IJ Printer.
11. Click Add to add the printer.

Similar Messages

Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

Assuming that you are in Win (which you haven't said), you can try using this tool to first remove all traces of previous versions of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
and run it immediately after restarting your computer.

Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Boot Camp won't update, no Bluetooth, can't install drivers, see OS X DVD

I have a client who has a whole mess:
Mac Mini Core2Duo running Leopard 10.5.6
Boot Camp 1.4 Beta
Vista
Inserting the OS X DVD produces nothing, can't see it, can't open it, can't install drivers from OS X Install Disc 1.
Can't update Boot Camp to 2.1 (update never executes no matter how long you wait after dblclick)
No Bluetooth in Vista, anywhere. Mighty Mouse somehow works but no scrolling with the ball.
Won't run Apple Bluetooth Installer.exe
My only recommendation at this point is to delete the Windows partition and start from scratch, and put XP back on instead of Vista, hoping that we'll be able to update Boot Camp to 2.1 and put the drivers on from the OS X Install Disc 1 that came with the Mini. This is fairly difficult to explain or even comprehend on my part, and I've been doing this for decades.
Anybody have a hint for me?

Oh nevermind. I was doing this via remote and as it works out, some people don't know if they have Leopard or Tiger.

Can't install drivers. unknown error

gents,
I suddenly can't install drivers so that my new iLok and my Logitech USB-Dongle aren't working. I did a backup of all drivers from another Win7x64 systemdrive and extracted them. The Drivers were working on that system and am there.
Still I got a FILE NOT FOUND or similar error.
I checked the SETUPAPI.DEV.LOG which I copied below. Can anyone see what's the problem with the iLok driver f.e. ?
[Device Install Log]
OS Version = 6.1.7601
Service Pack = 1.0
Suite = 0x0100
ProductType = 1
Architecture = amd64
[BeginLog]
. inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
. inf: {SetupCopyOEMInf: d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf} 21:18:40.097
. sto: {Import Driver Package: d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf} 21:18:40.098
. sto: Importing driver package into Driver Store:
. sto: Driver Store = C:\Windows\System32\DriverStore (Online | 6.1.7601)
. sto: Driver Package = d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf
. sto: Architecture = amd64
. sto: Locale Name = neutral
. sto: Flags = 0x00000000
. sto: Copying driver package files to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'.
. inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
. inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
. flq: {FILE_QUEUE_COPY}
. flq: CopyStyle - 0x00000000
. flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok'
. flq: SourceFilename - 'ilok-x64.cat'
. flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'
. flq: {FILE_QUEUE_COPY exit(0x00000000)}
. flq: {FILE_QUEUE_COPY}
. flq: CopyStyle - 0x00000000
. flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64'
. flq: SourceFilename - 'WdfCoInstaller01007.dll'
. flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64'
. flq: {FILE_QUEUE_COPY exit(0x00000000)}
. flq: {FILE_QUEUE_COPY}
. flq: CopyStyle - 0x00000000
. flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok'
. flq: SourceFilename - 'oem43.inf'
. flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'
. flq: {FILE_QUEUE_COPY exit(0x00000000)}
. flq: {FILE_QUEUE_COPY}
. flq: CopyStyle - 0x00000000
. flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64'
. flq: SourceFilename - 'iLokDrvr.sys'
. flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64'
. flq: {FILE_QUEUE_COPY exit(0x00000000)}
. flq: {_commit_file_queue}
. flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=4
. flq: {_commit_copy_subqueue}
. flq: subqueue count=4
. flq: source media:
. flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok]
. flq: SourceFile - [ilok-x64.cat]
. flq: Flags - 0x00000000
. flq: {_commit_copyfile}
. flq: CopyFile: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\ilok-x64.cat'
. flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD0.tmp'
. flq: MoveFile: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD0.tmp'
. flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\ilok-x64.cat'
. flq: {_commit_copyfile exit OK}
. flq: {_commit_copyfile}
. flq: CopyFile: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf'
. flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD1.tmp'
. flq: MoveFile: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD1.tmp'
. flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\oem43.inf'
. flq: {_commit_copyfile exit OK}
. flq: source media:
. flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64]
. flq: SourceFile - [WdfCoInstaller01007.dll]
. flq: Flags - 0x00000000
. flq: source media:
. flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64]
. flq: SourceFile - [WdfCoInstaller01007.dll]
. flq: Flags - 0x00000000
. flq: {_commit_copyfile}
!!! flq: Error installing file (0x00000002)
! flq: SourceFile - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64\WdfCoInstaller01007.dll'
! flq: TargetFile - 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64\WdfCoInstaller01007.dll'
. flq: {SPFQNOTIFY_COPYERROR}
!!! sto: Failed to copy file 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64\WdfCoInstaller01007.dll' to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64\WdfCoInstaller01007.dll'. Error = 0x00000002
. flq: {SPFQNOTIFY_COPYERROR - returned 0x00000000}
!!! flq: SPFQNOTIFY_COPYERROR: returned SPFQOPERATION_ABORT.
. flq: {_commit_copyfile exit(0x000003e3)}
. flq: {_commit_copy_subqueue exit(0x000003e3)}
!!! flq: FileQueueCommit aborting!
. flq: {_commit_file_queue exit(0x000003e3)}
!!! sto: Failed to copy driver package to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'. Error = 0x00000002
. sto: {Import Driver Package: exit(0x00000002)} 21:18:40.125
. inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
! inf: Add to Driver Store unsuccessful
!!! inf: returning failure to SetupCopyOEMInf
. inf: {SetupCopyOEMInf exit (0x00000002)} 21:18:40.251
!!! ndv: Driver Package import failed for new device...installing NULL driver.
. dvi: {Plug and Play Service: Device Install for USB\VID_088E&PID_5036\3088A22A_7C39126D}
. ump: Creating Install Process: DrvInst.exe 21:18:40.266
! ndv: Installing NULL driver!
. dvi: Set selected driver complete.
. dvi: {DIF_ALLOW_INSTALL} 21:18:40.333
. dvi: No class installer for 'iLok'
. dvi: No CoInstallers found
. dvi: Default installer: Enter 21:18:40.334
. dvi: Default installer: Exit
. dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 21:18:40.334
. dvi: {DIF_INSTALLDEVICE} 21:18:40.334
. dvi: No class installer for 'iLok'
. dvi: Default installer: Enter 21:18:40.335
! dvi: Installing NULL driver!
. dvi: Writing common driver property settings.
. dvi: {Restarting Devices} 21:18:40.351
. dvi: Restart: USB\VID_088E&PID_5036\3088A22A_7C39126D
. dvi: Restart complete.
. dvi: {Restarting Devices exit} 21:18:40.562
. dvi: Default installer: Exit
. dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 21:18:40.563
. ump: Server install process exited with code 0x00000000 21:18:40.567
. ump: {Plug and Play Service: Device Install exit(00000000)}
. ndv: {Update Driver Software Wizard exit(00000002)}

update. I also post the SETUPAPI.APP.LOG:
[Device Install Log]
OS Version = 6.1.7601
Service Pack = 1.0
Suite = 0x0100
ProductType = 1
Architecture = amd64
[BeginLog]
[Boot Session: 2014/12/29 20:54:19.610]
>>> [Build Driver List - USB\VID_088E&PID_5036\3088A22A_7C39126D]
>>> Section start 2014/12/29 21:18:39.855
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
cpy: Policy is set to make all digital signatures equal.
<<< Section end 2014/12/29 21:18:39.857
<<< [Exit status: SUCCESS]
>>> [Build Driver List - USB\VID_088E&PID_5036\3088A22A_7C39126D]
>>> Section start 2014/12/29 21:18:39.862
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
cpy: Policy is set to make all digital signatures equal.
! sig: Verifying file against specific (valid) catalog failed! (0x80096002)
! sig: Verifying file against specific Authenticode(tm) catalog failed! (0x800b0100)
<<< Section end 2014/12/29 21:18:40.093
<<< [Exit status: SUCCESS]
>>> [DIF_SELECTBESTCOMPATDRV - USB\VID_088E&PID_5036\3088A22A_7C39126D]
>>> Section start 2014/12/29 21:18:40.093
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
<<< Section end 2014/12/29 21:18:40.093
<<< [Exit status: SUCCESS]

I can`t install drivers for Promise IDE on WINXP.

Hi, guys. I have a problem. I can`t install drivers for Promise IDE on WINXP. I `ve got an error "This device cannot start. (Code 10)". In Norton Ghost (DOS) drive on Promise work fine. I can`t install WINXP + SP1 on HDD on Promise controller. After pressing F6 and installing driver i `ve got an error Can`t find drive. BIOS 193 beta. Devices: IBM 120Gb 180GXP on primary master, Seagate 120 SATA 26AS on Third master. CD-ROM and DVD-ROM on secondary channel. Drivers 1.00.1.37 from ASUS and 1.00.1.29 from MSI. No result.
And another one. Why very poor perfomance when copying large files (700Mb). When starting copying speed is 25-27Mb/sec, when finishing 5-8Mb/sec. All drives under NTFS.
PS. Sorry for my bad english.

Quote
Originally posted by Athlon1000
But if you have selected Promise as: SATA in BIOS shouldn't you then use the ulsata.sys driver instead and if you choose Promise as: RAID in BIOS then you should use the f2tx*.sys, or am I way wrong here ?
That's correct
So if I do not misunderstand you, Windows hangs when accessing the drive?
Is it only with this drive, then maybe it's an incompatibility between the controller and the ata electronics of the drive.
Or maybe it's completely broken.. have you tried it on the ICH5 IDE controller?
If it works there you should use this configuration.
I've read about problem with some drives ... take a look into the threads on the top of this board (FAQ etc.).
What I found out yesterday: You can use the Promise in RAID mode and define a RAID0 array with only one single drive. So you could use the Fasttrak driver from MSI, which is up to date.
I haven't tried this solution (one disk in a RAID0 stripe configuration), but I think it should work...
Maybe you give it a try
PS.: Before you switch to RAID mode, you have to change the Promise Driver... but be careful: windows won't boot with the wrong driver - your last chance would be "last known good" then...

HT5639 i use boot camp to install windows 8.1 but in the middle of the installation it is stop,how can i install the windows again?

i use boot camp to install windows 8.1on my mac but in the middle of the installation it is stop,how can i install the windows again?
why it`s stop?

What is your exact machine and what's the error

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.

Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.
Bridge worked great for a while then started to fail when starting. Old Bridge CS6 still works fine. HELP ... please.

You problem is in the Fault Module MSVCR80.dll
Do a web search for this. Here is one LINK

I am using Elements 13 and photoshop editor has stopped working can you help

I am using Elements 13 and photoshop editor has stopped working can you help

hi Andaleeb sorry to hijack Stephanie's thread!
I don't get any crash reports, it starts to open then just stops, nothing happens. ive tried getting in through the organiser but that doesn't work either.
I think my laptop is Windows 8 (its a fairly new laptop, does that sound about right?)
it was working Saturday I'm quite new to using it so no real workflow, just playing around with effects. ive only had it about a month
Thanks
Natalie

My phone fall down and suddenly the network stopped working can't find for any coverage, And I already reset the all settings and network settings!!! plz help me

my phone fall down and the network stopped working can't search to any coverage

It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

(MacBook 2014 model) most of keybord stopped working can't login. Restarted, screen started flashing bootup was slow and but no success. Tried safe boot but still no effect. Any suggestions please!! Urgentw

(MacBook 2014 model) most of keybord stopped working can't login. Restarted, screen started flashing bootup was slow and but no success. Tried safe boot but still no effect. Any suggestions please!! Urgentw

Try SMC and NVRAM resets:
https://support.apple.com/en-us/HT201295
https://support.apple.com/en-us/HT204063
Then try the safe boot again:
https://support.apple.com/en-us/HT201262
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao.

Element 11face-recognition feature has stopped working, can I unstall and re-install?

Elements 11 face-recognization feature has stopped working. Can I uninstall and reinstall this program on the same computer without being concerned about deactivation and serial number issues?

If people recognition dialog shows you no suggestions, it would help if you rename breezesession.dat file to say breezesession.dat.old and check if FR runs fine now.
To find this file go to Help > System Info in Elements Organizer and see your catalog location. Within the catalog folder, there is a BreezeData folder which contains breezesession.dat.
Thanks
Andaleeb

Canon Selphy stopped working...

Hi. My Canon Selphy 510 photo printer stopped working with my macbook. It worked before, but now stopped. I was able to connect it to my g4 tower and get it to print from there (so we know it's not a hardware or cable issue), I was also able to print directly from my camera. I also have another printer on the network that is working 100% with this mac.
On the macbook, I uninstalled, then reinstalled the canon drivers. reboot, etc. no dice.
Here's the problem:
When you print, it fails. And the printer queue status goes back to Stopped. The normally lit green light blinks red just once.
At the end of this post is a clip from the error log (I set cups to debug loglevel for this). Notice how it thinks that it's out of paper and or ink, but it's not! I even tried to print without the paper in, to force it into a REAL no-paper-state, and this didn't help.
Let me add, the Canon Printmonitor application always just says Ready, and doesn't indicate any error state.
Do you guys have any ideas? Could there have been a software update I installed between now and when the printer worked that broke something? Thanks.
D [16/Jun/2007:06:42:58 -0400] [Job 34] JobManager converting file: /private/va
r/spool/cups/d00034-001 (7 args)
D [16/Jun/2007:06:42:59 -0400] [Job 34] `/private/var/spool/cups/d00034-001' ha
s 1 pages.
D [16/Jun/2007:06:42:59 -0400] [Job 34] PDFtoTiogaRaster: xResolution = 300, yR
esolution = 300
D [16/Jun/2007:06:42:59 -0400] [Job 34] PDFtoTiogaRaster: SheetWidth = 295.68,
SheetHeight = 579.72
D [16/Jun/2007:06:42:59 -0400] [Job 34] ImageableArea.origin.x = -0, ImageableA
rea.origin.y = 0, ImageableArea.width = 295.68, ImageableArea.height = 579.72
D [16/Jun/2007:06:42:59 -0400] [Job 34] frameWidth = 1232, frameHeight = 2415
D [16/Jun/2007:06:42:59 -0400] [Job 34] ColorSyncProfileID in PMConverterSetupT
icket is different from that in PrintSettings: expectedProfileID = 1580, actual
ProfileID = 0,
D [16/Jun/2007:06:42:59 -0400] [Job 34] PDFtoTiogaRaster USING DISPLAY LIST IMP
LEMENTATION
I [16/Jun/2007:06:42:59 -0400] [Job 34] kPMEventJobProgress:1 1 1 1 1 1 0
D [16/Jun/2007:06:43:00 -0400] [Job 34] sendJobProgressEvent: currentPage: 1 cu
rrentCopy: 1 currentSheet 1 percent: 86 isEndOfSheet:no
I [16/Jun/2007:06:43:00 -0400] [Job 34] kPMEventJobProgress:1 1 1 1 1 1 86
D [16/Jun/2007:06:43:00 -0400] [Job 34] sendJobProgressEvent: currentPage: 1 cu
rrentCopy: 1 currentSheet 1 percent: 100 isEndOfSheet:yes
I [16/Jun/2007:06:43:00 -0400] [Job 34] kPMEventJobProgress:1 1 1 1 1 1 100
E [16/Jun/2007:06:43:03 -0400] [Job 34] fatal: The specified Ink Cassette and P
aper cannot be found.^MReplace the Ink Cassette and Paper.
E [16/Jun/2007:06:43:03 -0400] PID 258 stopped with status 254!
D [16/Jun/2007:06:43:03 -0400] UpdateJob: job 34, file 0 is complete.
D [16/Jun/2007:06:43:03 -0400] StopJob: id = 34, force = 0
MacBook Mac OS X (10.4.9)

Hi there,
We have a Selphy 810 and I was going to test this on an Intel Mini, as I'm concerned it may be an issue with the PPC drivers on the Intel Mac, but unfortunately the power supply for the printer is missing so I cannot check this for you just yet. I'll keep on the hunt and hopefully have a reply soon.
In the meantime, what application are you trying to print from? If its a Universal app, then you could try setting the app to open using Rosetta. This would help to identify if its an Intel issue. Also, have you tried setting the Page Setup > Format for to the Selphy rather than 'Any Printer'?

Adobe Creative Cloud has stopped working- can't open or uninstall creative cloud- windows 7

Hi! I am having issues with my Adobe Creative Cloud Desktop App. It wont open. A window pops up saying that Adobe Creative Cloud has stopped working. I've already tried the Adobe Creaive Cloud cleaner, and it doesn't work. What should I do to uninstall my app, so I can install it and have it actually work?

App doesn't open | Progress wheel spins continually
https://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html

Canon 3000 stopped working, can't install drivers.

Similar Messages

Maybe you are looking for