Canon 350d cr2 supported?

Hi all.
I have Aperture 1.5 currently shipping but noticed something odd in the 'supported camera raw' page. Within it has an asterix next to Canon XT that's supposed to meaning 'providing optimized support' but not the 350d. Anyone know exactly what this support is? Here is the page I see it on:
http://www.apple.com/au/aperture/raw/cameras.html
I certainly hope it is not as is the case with iPhoto where raw adjustments are actually performed on a Jpeg instead.
This concerns me somewhat as here in OZ the 350d was not supported by iPhoto 05 about a year ago (until a few OSX updates), whereas the XT was. Both with CR2 file ext. but different camera names.
Any clues? PLs let me know as I still have time to cancel the order.
Cheers

Hey cobracero,
just installed Aperture and can confirm no probs with a '350 d'. I am aware of your frustration as the initial purchase of my camera meant running around trying to find why iPhoto 05 (before I upgraded to 06) was showing 'unsupported format'. The camera 'name' was left out of the script of OSX and later written in after a few updates. If you haven't done so try another mac to see if iPhoto will see the raws. Basically, I wonder if you have a corrupt card. If not, it's obviously in Osx.
Sorry if this has already been mentioned.
Good luck

Similar Messages

Advanced RAW processing which doesn't support Canon 350D RAW?? Surely not??

I am the owner of one the most popular DSLR's there is - wanted to make certain of compatability prior to purchase and found marketing material specifically naming my camera as supported (Rebel XT - same thing). Now seething owner of a $699 pretty software that is of absolutely no use to me. Tried update 1.01 with hope, only to be crushed again! Have seen some references to how to fix it oneself with administrator access but don't want to mess with it and, frankly don't think I should have to. Does anyone have a suggestion/knowledge of when the Canon 350D is supported? Feel like bringing the box back to the store and shove it down someones throat. Like buying a potato peeler which only peels oranges. Seriously ******!!
Imac Mac OS X (10.4.3)

Really, you're asking for support of a low-end
consumer camera in a pro app.
Surely it would be nice to have that support as I
expect that some folks use the rebels as backup gear,
but it should hardly be a priority in this app.
However, since iphoto uses the same converter, and
since iphoto really really should support the rebels,
I'm sure we'll see support for this camera appear in
aperture one day.
That's such a total canard. OSX should be striving to support just about everything out there like ACR just about does and I consider CS2 and ACR a heck of a higher level of "pro" app then Apeture. I don't want some elitist deciding what's "pro" equipment and what people "should" be shooting with. That's why I switched to Mac in the first place. I just want it to work. I don't want some equipment snob deciding what takes "professional" pictures. It should strive to support just about every raw format.

Does Fireworks 8 support Canon's .CR2 raw files

Does anyone know if Fireworks 8 supports Canon's .CR2 raw
files? I tried to open some .CR2 files in Fireworks 8 and it did
not recognize them...can I update or something so it will recognize
them or do I have to revert back to shooting in jpg?

> Does anyone know if Fireworks 8 supports Canon's .CR2
raw files?
>
see if this free converter will turn it into a format
fireworks will open?
http://www.macworld.com/news/2007/12/06/raw/index.php
a photoshop plugin-
http://www.adobe.com/products/photoshop/cameraraw.html
and a standalone converter
http://www.adobe.com/products/dng/
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

IPhoto (and preview) not recognising Canon 350D raw files

Hi,
I'm using a Canon 350D (UK version of Digital Rebel XT) and OS X (specifically preview and iPhoto) won't recognise the .cr2 raw images it produces.
The images have finder thumbnails but if I try to open them I get:
The document "xxx.cr2" could not be opened.
Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize.
In iPhoto I get an 'Unreadable files' alert telling me it can't read them and then lists the files.
I know that it should work fine and am stuck in terms of what I'm doing wrong.
This problem has existed since I was on 10.4.7 when I bought the computer and camera - I'm now on 10.4.9. I did download the Aperture trial to see if that helped and had the same problems. Reinstalling OS X made no difference.
Any ideas?
Iain

Iain:
Welcome to the Apple Discussions. Have you run this update: Digital Camera RAW Support Update 1.0.1 (Universal)
Do you Twango?

Canon 350D Raw images not recognised

Hi,
I'm using a Canon 350D (UK version of Digital Rebel XT) and OS X (specifically preview and iPhoto) won't recognise the .cr2 raw images it produces.
The images have finder thumbnails but if I try to open them I get:
The document "xxx.cr2" could not be opened.
Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize.
In iPhoto I get an 'Unreadable files' alert telling me it can't read them and then lists the files.
I know that it should work fine and am stuck in terms of what I'm doing wrong.
This problem has existed since I was on 10.4.7 when I bought the computer and camera - I'm now on 10.4.9. I did download the Aperture trial to see if that helped and had the same problems. Reinstalling OS X made no difference.
Any ideas?
Iain
Imac 20" C2D Mac OS X (10.4.9)

Actually, I was getting support for my Canon Powershot S50 in 10.4.8 (at least I could open the Raw files, although Image Capture mysteriously stopped downloading them from the camera), after doing the 10.4.9 Combo update Preview announced it could not open the files. I went in and hacked this file:
"/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/Raw.plist"
Changed the entry for Canon S60 (which I don't have) to Canon S50. Preview will now open the files, haven't tried Image Capture yet to see if it is still broken (works fine in Panther BTW). See this discussion in MacOSXHints:
http://www.macosxhints.com/article.php?story=20051101035330228
It worked sort of for me (at least I can open the Raw files I already have).
Francine
Francine
Schwieder

Unable to recognise Canon 350D raw images

Hi,
I've posted this in the Tiger forums and someone suggested I try here too.
I'm using a Canon 350D (UK version of Digital Rebel XT) and OS X won't recognise the .cr2 raw images it produces.
The images have finder thumbnails but if I try to open them I get:
The document "xxx.cr2" could not be opened.
Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize.
In iPhoto I get an 'Unreadable files' alert telling me it can't read them and then lists the files.
I know that it should work fine and am stuck in terms of what I'm doing wrong.
This problem has existed since I was on 10.4.7 when I bought the computer and camera - I'm now on 10.4.9. I did download the Aperture trial to see if that helped and had the same problems. Reinstalling OS X made no difference.
Note that I've tried the Digital camera raw support download and also editing the raw.plist file (have since done an archive and install so I know I haven't damaged it).
Any ideas?
Iain

bought the computer and camera - I'm now on 10.4.9. I
did download the Aperture trial to see if that helped
and had the same problems. Reinstalling OS X made no
difference.
If you hadn't said that you'd reinstalled everything, then I'd be less puzzled.
Firstly - are these files straight out the camera/off the card? Or are you using some Canon software to copy or look at them first? It's not unheard of for software like DPP to modify the files slightly and make them unreadable by third-party programs.
Next - It's worth checking what versions of frameworks are installed on your system, against someone else who also has a Mac working with Aperture.
This can be done by running "System Profiler" (Applications -> Utilities; or by going to the "About This Mac" menu (first option on top left Apple menu) and then clicking on "More Info...", select the "Software" option on the left hand side, and then select "Frameworks".
Key ones to look at are:
- ProKit (3.1)
- QuickTime (7.1.3)
- QuartzCore (mine's 1.4.11, but I've not updated to 10.4.9 yet.)
also ImageIO (a part of ApplicationServices) is quite critical - but unfortunately SystemProfiler doesn't report that. But you say you've applied 10.4.9 (if you've installed either of the DigitalCameraRAW updates hopefully they were installed before updating to 10.4.9) so it should have been updated to the latest, correct version then.

Why can't I download Canon S100 CR2 RAW files into PSE 10?

I am using PSE 10 with a Canon S100 camera. I am successful in downloading all of my jpeg files and RAW CR2 files from my older Canon Rebel, but not with the Canon S100 CR2 Raw files.
When first downloading from the Canon S100 camera into PSE 10 and later doing them manually, I receive the following messages: Nothing imported...files are not supported file types or alread in catalog. File damaged or in a format that cannot be included in the Elements Organizer.
These problems files, by the way, were automatically added to my Window's My Pictures catalog and are perfectly fine.

Thank you for the info. It worked great, once I was
able to get around a second problem that prevented updating
from within the PSE 10 application (error U41M1C212). That
problem was solved by disabling the MS Virtual WiFi Miniport
Adapter (located in the Network and Sharing Center control
panel). It just goes to show me once again, how complex
computer apps are and how much we all have to rely on each
other to get anything to work properly (frustratingly
enough, since the companies we paid good money to for
their problematic software are not very helpful). Thanks
again.
            Re: Why can't I download Canon S100 CR2 RAW files into
PSE 10?
            created by 99jon in Photoshop Elements - View the full discussion
Try opening a CR2 directly from a folder by right-clicking
and choosing open with Photoshop Elements editor, if that
dosent work, update the appliactaion (required for the
S100V)
In the Editor menu click Help >> Updates
Then install amera raw 6.7
            Replies to this
message go to everyone subscribed to this thread, not directly
to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4602882#4602882
            To unsubscribe from
this thread, please visit the message page at
http://forums.adobe.com/message/4602882#4602882. In the
Actions box on the right, click the Stop Email
Notifications link.
            Start a new discussion
in Photoshop Elements by email or at Adobe Forums
            For more information
about maintaining your forum email notifications please go to
http://forums.adobe.com/message/2936746#2936746.

Canon G9 not supported - Alternative

The topic of no RAW support for Canon G9 (CR2) that I posted yesterday was removed this afternoon. I did look into competitive products and they only recently posted upgrades to support Canon G9.
Lightroom v1.3 supporting G9 was launched approx. December 12. G9 Raw files worked with 1.2 but was not supported until 1.3. Upgrading to v1.3 messed up the RAW files processed under 1.2.
Bibble began support of G9 around December 17 This is not an option as for some reason Raw file for my older Olympus camera are no longer supported.
To be fair it appears most programs only began to support G9 within the last few weeks. I am leaning towards sticking with Aperture with the exceptions support for G9 should be in the next 4 weeks. In the mean time I can use the Canon Raw Processor that came with the camera and transfer files to Aperture.

Volker, do yourself a favor, stick with the Powerbook and Aperture. Apple's inexcusable delay in supporting the new format is no reason to cross over to the dark side. It is true Aperture does not yet support the G9, and I also find that very disappointing on the part of Apple. Many of the other apps do in fact support the G9-CR2 format.
I will briefly give you my experience. The G9 files are easily seen by Bridge CS3, and easily converted to .dng files by Adobe Camera Raw. But even those dng's are not seen by Aperture as they are based on the unsupported G9 RAW file type. The only easy way I have found to get them in Aperture is to use the Canon software "Raw Image Task" and save the files as tiffs. This was pretty speedy on my MacPro, and the files were promptly read by Aperture.
<Edited by Moderator>
Peace, John

Canon 350D/450D vs. Photoshop CS4/5

I wonder how to setup a Canon camera with USB to a laptop and get the
picture auto into photoshop/Bridge when the picture is taken.
Anyone who have done this?

dogscanlookup wrote:
How does that work with a CC subscription? I mean, do I have to pay for a new license for out of date software?
A CC subscription lets you install some older versions of some of the apps like Photoshop. But Lightroom 5 is the earliest you can install with Creative Cloud. That means a CC subscription isn't going to help solve this problem. If you want to try using Lightroom 4.1 you will have to find a license somewhere; Adobe no longer sells them. But getting Lightroom 4 may not solve the problem on its own.
I own a 350D and Lightroom 4.1, so I tried it on my Macs running Mavericks. Tethering the 350D still doesn't work. Tethering a 7D works great, the camera is recognized immediately.
I think the problem is the one that ssprengel mentioned: Canon themselves stopped supporting the 350D in their tethering SDK and no longer updated it for newer versions of OS X. If you want to tether a 350D, I think your first step is to set up a boot disk with an older version of OS X and then install the tethering software on that. Some additional evidence backing this up: Other software won't tether a 350D either. For example, DSLR Remote Pro can only tether a 350D up to Mac OS X 10.5. Also, the current version of Canon EOS Utility cannot tether a 350D in Mavericks, so you can't even do it with Canon's own software. When you trace the problem all the way back, it looks like it isn't an Adobe or Apple problem, but ultimately a Canon problem.

Photoshop Touch for Android - CR2 support?

Dear photoshop wizards,
I seem to be unable to open Canon raw files (CR2) files inphotoshop touch for Android. Any ides if there are plans to support this and include cr2 support in the "soon" to be released Light room for mobile app? Just like most photographers, I use strictly Raw files for post processing.
Cheers,
Henry
henrygomez.com.au

What gruele said; you have to sign in with the Google account that the app was bought on to install and use PS Touch.

Canon 350D/450D vs. Lightroom

I wonder how to setup a Canon camera with USB to a laptop and get the
picture auto into Lightroom when the picture is taken.
Anyone who have done this?

dogscanlookup wrote:
How does that work with a CC subscription? I mean, do I have to pay for a new license for out of date software?
A CC subscription lets you install some older versions of some of the apps like Photoshop. But Lightroom 5 is the earliest you can install with Creative Cloud. That means a CC subscription isn't going to help solve this problem. If you want to try using Lightroom 4.1 you will have to find a license somewhere; Adobe no longer sells them. But getting Lightroom 4 may not solve the problem on its own.
I own a 350D and Lightroom 4.1, so I tried it on my Macs running Mavericks. Tethering the 350D still doesn't work. Tethering a 7D works great, the camera is recognized immediately.
I think the problem is the one that ssprengel mentioned: Canon themselves stopped supporting the 350D in their tethering SDK and no longer updated it for newer versions of OS X. If you want to tether a 350D, I think your first step is to set up a boot disk with an older version of OS X and then install the tethering software on that. Some additional evidence backing this up: Other software won't tether a 350D either. For example, DSLR Remote Pro can only tether a 350D up to Mac OS X 10.5. Also, the current version of Canon EOS Utility cannot tether a 350D in Mavericks, so you can't even do it with Canon's own software. When you trace the problem all the way back, it looks like it isn't an Adobe or Apple problem, but ultimately a Canon problem.

Canon 350D probs with uploading(not reconised)

Canon 350D problems uploading (not reconised). please help.

Hi,
If you need our help, please supply a lot more detail.
What version of elements are you using? - The EOS 350D has been supported since version 3.
What operating system are you using? - Does the operating system see your camera?
Has it ever worked? - If so, has something changed recently?
Have you loaded any driver for the camera?
Does elements see the camera but doesn't recognize the file type? What is the exact message you are getting?
Brian

Macbook + Aperture 2 + Canon 350d

Wondering if anyone can help. I'm trying to use my Canon 350d for tethered shooting in aperture 2 but I'm not really getting any response. If i have the camera set to ptp mode then the capture button in the HUD is greyed out and i can't use the shutter. If i have the Camera set to PC mode then every time i try to open a tethered shooting session, aperture crashes.
Has anyone had a similar problem?

Hi,
I'm not familiar with the 350D but with the 1D's I have to use the Canon utility to tether to the camera. This gives full function and remote operation of the camera including live view etc. The Hot Folder app looks at the folder and imports the image into Aperture. The 1Ds Mk3 isn't supported at this date by Aperture either.
It's not a work around but something better since I still have full operational function of the camera and not just a release button. Check your canon CD or to Canonusa.com to see if they have the utility for that camera.
Cheers
Mark

Unable to open Canon 7D CR2 raw files in Photoshop CS6

Hi Folks,
I have been trying to open Canon 7D CR2 raw files in Photoshop CS6 (Extended) (Windows 8.1) but I'm always getting the error "Could not complete your request because the file format module cannot parse your file".
I installed the Camera Raw plugin ver 8.8.0.397 today. Did this initially by downloading and running the CameraRaw_8_8.zip available here Camera Raw plug-in installer. Still got the error.
Went and did the Check Updates in Photoshop and updated the Camera Raw (and other components) but STILL cannot open the CR2 files.
I can see the thumbnails in Bridge but when I double click to open them in Photoshop, same error.
Cannot seem to get past the "Could not complete your request..." error.
Any ideas?
Cheers,
Doug...

Hi Folks,
Thanks for your replies and assistance so far, very much appreciated. Its a very frustrating problem... this should be one of those things that just work.
I have uploaded two sample pics taken with my canon 7d. If you get a chance, could you please try opening these images to see if they work on your machine.
http://www.bespoke-gems.com/images/gemstones/misc/rawtest1_canon7d.cr2
http://www.bespoke-gems.com/images/gemstones/misc/rawtest2_canon7d.cr2
I have tried opening them on both my office and home computer but neither of them work.
Hmmm... could it have anything to do with the lens (Canon Macro Lens EF 100mm1:2.8 USM)
Many thanks!

Why do not Canon 350D show up in the Finder?

Hi
I have connected my Canon 350D, using the USB connector. It does not show up in the Finder window.
IPhoto will automatically start and I can download the images.
I prefer to use Photoshop CS2, but the canon is not shown there eighter! How can I get it to be shown on the bridge of Photoshop and in the find window???
Is there a driver or an update that I have to download for this???
The thing is that I now have to download all the images into Iphoto and then open them in the bridge. I dont want that. I want to use the bridge and pick the pictures I want to work with directly from the camera memorycard without loading then into Iphoto first!
Please help!

Hi there,
go to Applications-->Image Capture-->Preferences-->General.
Change the setting so that Bridge is the selected Application.
regards
Ric

Canon 350d cr2 supported?

Similar Messages

Maybe you are looking for