Canon 350XT: Which driver to use to read the card?

http://146.184.121.145/inetCA/en/serviceDetail/method/load/id/45/sid/7/mid/0002200146/type/S
This page does not show what each is used for.  
WIA Driver 5.6.0 for Windows XP > WA560EN seems to be obvious.  But it didn't work.
Why don't they list what each is used for?  What is a WIA driver?  

Picture Transfer Protocol (PTP) is a protocol developed by the International Imaging Industry Association to allow the transfer of images from digital cameras to computers and other peripheral devices without the need of additional device drivers. 
It is standardized for USB by the USB Implementers Forum as the still image capture device class.
If this doesn't work, something else is wrong!
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

Similar Messages

  • Apple usb jis keyboard in windows xp which driver to use

    hi,
    i bought the apple jis usb keyboard for my wife since it looked nice and was usb. it is supposed to be like standard 106/109 layout for japanese jis. However, I am not sure which driver to use in windows xp. xp will try to use the standard hid driver. I set it to microsoft 106/109 usb and while all the standard keys match up, the special language mode keys do not.
    Any help here? (ie. use alps usb japanese keyboard driver) or is there a downloadable driver?

    actually found a kernel mode driver called
    applek pro 1.8.x which will allow for this.. Anyone try it?
    thoughts?

  • Which Driver to Use?

    I have been using the Windows 7 x64 drivers with no problems, but i notice Daniel k's drivers located here ( http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485 ) and am now wondering if i should used it's Is it worth the swap or should i stick with official stuff?

    Re: Which Driver to Use?S jmacguire
    <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790;jsessionid=08A63644D695A7B9CB69AFAF7A46DCEC "]http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790;jsessionid=08A63644D695A7B9CB69AFAF7A46DCEC[/url]
    Will those drivers work with my PCI X-Fi platinum?
    Also, what do you mean install the creative drivers on top? Do you install the Daniel K drivers then the creative ones?
    Thanks for all the help you have provided to others so far.
    I am having SCP issues with an X-FI platinum on an EVGA 780i SLI motherboard (not running SLI) with a Q6600, 4gb of ram (in all 4 slots) and an 8800GTS on Windows 7x64 pro.

  • The log file which can be used to track the HTML preview of HFR Reports

    Hi,
    Could you please let me know the log file which can be used to track the HTML preview of HFR Reports?
    Thanks,
    Aparna

    You could check the FinancialReporting0.log and FRLogging.log .You could refer the same in the
    " http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_11121.pdf" page 47.

  • HT5878 how to check the detail of font being used for reading the file received by an email

    I received word file as an attachment with email on my iphone. I want to check the detail on font being used for reading the word file received as attachment in an email.
    Thanks

    You don't need to copy the cert out of your configuration. OpenSSL has an "s_client" subcommand which can open an SSL connection and verify the cert for you. It even knows how to do STARTTLS. Something like this ought to do it:
    openssl s_client -starttls smtp -CAfile /path/to/ca/file -connect your.ironport:25
    The /path/to/ca/file is necessary to provide openssl with a cache of root CA certs. You could use -CApath instead of -CAfile if you have a hashed directory of root CA certs instead of a single file containing them all.
    You can also point this at your partner's SMTP server as well.

  • I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

    I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
    I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
    Thanks so much!

    To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
    For an admin password:
    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you cannot do the above then try this:
      1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command until
         you do.  If after seven tries you still do not receive a "Filesystem OK" message,
         then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    How to reset the OS X password without a startup CD:
    Reboot into Single-user Mode. Enter the following and press RETURN after each command line
       1. Type fsck -fy
       2. Type mount -uw /
       3. Type passwd <username>
    I have never tried this method myself.

  • Is it possible to find out which user was used to delete the job?

    Is it possible to find out which user was used to delete the job?
    Any logs?

    Hi,
    You can find who are the users who executed sm37 in ST03N.
    This might also help you in analyizing.
    Regards,
    Vamshi.

  • Tried to upgrading ipad 1 from itunes and l guess it did not complete because all I have showing on the ipad is the itunes logo with the usb cable. when l try to connect it to my system, it resquest that a driver be used to install the device. Pls help

    Tried to upgrading ipad 1 from itunes and l guess it did not complete the process because all I have showing on the ipad is the itunes logo with the usb cable. When l try to connect it to my system, it resquest that a driver be used to install the device. Please help! How do I restore?

    Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.

  • After upgrading to MAC OS X 10.10.2 Lightroom 5 has an error that it cannot read the card when trying to import photos.  The card is fine as I can import into iPhoto so any ideas?

    After upgrading to MAC OS X 10.10.2 Lightroom 5 cannot read the card (RAW files , converting to DNG) when importing.  The card is fine as I can import into iPhoto - any ideas?

    It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
    Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
    Library >> Preferences
    clear everything relating to LR5 which usually means deleting the following files:
    com.adobe.Lightroom5.plist
    com.adobe.Lightroom5LSSharedFileList.plist
    Then re-launch Lightroom.

  • Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

    Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
    I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

    Hi,
    Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
    The card should appear in the System Profiler under Fibre Channel and PCI Cards.
    All the best
    Beatle

  • I got an itunes card and you cannot read the card

    I was trying to use the itunes card and I cannot read the card
    I can give the GCA card:

    Help here.  iTunes Store: Invalid, inactive, or illegible codes
    Apple Gift Cards - FAQ's

  • I purchased a digital itunes giftcard through paypal but can't seem to find a 'code' to use to redeem the card. Could someone help me find where that code would be found? I can see the paypal transaction details.

    I purchased a digital itunes giftcard through paypal but can't seem to find a 'code' to use to redeem the card. Could someone help me find where that code would be found? I can see the paypal transaction details. jgm22

    -> iTunes Cards & Codes

  • Which driver to use in the BPM Configuration Steps?

    Hi,
    I´m in the BPM configuration steps and we will use BPM on a Weblogic Server, I´m in the step when you need to create to JDBC Data Sources for the Enterprise and Directory Databases, do you know which driver shoul I use? should it be XA o Non-XA?
    Thanx in Advanced!
    Kind Regards,
    Gerardo J

    Since there are no drivers, you can create your own, request one, use the Instrument I/O Assistant, or hope someone has one and posts it here. For help on creating one or requesting one, see the main Instrument Driver Network page. As long as you are familiar with the instrument and have the manual, creating a driver is not that hard.

  • Hard Drive Setup - which drives to use for what

    So I have decided on buying a segate 7200.14 hard drive (Tell me if this is a bad one, I just saw a bunch of reviews and benchmarks and it is supposed to be one of the fastest), but I'm not sure weather to use it as a scratch disk, a media disk, or an OS disk. Currently I only have one slow, old 500gb drive, which I was going to use to store old media and exports (I don't need to acces projects that I worked on a year ago). I have an external backup drive as well. I was thinking of getting the 7200.14 drive, since it is so fast and cheap and using it for my main drive, but now I'm wondering, would I be better off using it as the scratch drive? I can always wait for my OS and programs and such to load slower, but I'd like stuff inside of the program to be quick. I also don't care much about exports since I'm in no rush to get the work out as quick as I can, and I normally just leave it rendering overnight.
    TL;DR
    1.) slow, old 500gb drive
    2.) new, fast 7200.14 drive
    3.) I can possibly buy another drive if it's absolutely necessary, but I have gathered that the third drive is for OS, which I don't need to load quickly at all.
    Which one of these things is most bottlenecked by the hard drive? What should I do with my hard drive setup?
    EDIT:
    Also, is the 7200.14 a good drive? Tell me a better one if you think of one. I was thinking of getting the 1tb version but I might get the 3tb version for storage, since its a much better $/gb.

    Alright, I've gathered that the media cache and the medi files are not suited to be on an SSD (media because of large file sizes and media cache because of longevity, since it has to read and write so many times). But which one would I benefit more from being faster? Or could I just leave them both slow, and get two cheaper slower hard drives instead of the one fast 7200.14?

  • BEA MS Sql server which driver to use?

    We have BEA weblogic 8.1 and want to work with sql server Which driver
    shoudl we use ?
    i believe driver is deprecated
    Bea talks about the new driver
    "WebLogic Server 8.1 SP1 includes a new JDBC driver from BEA for connecting
    to a Microsoft SQL Server database. The BEA WebLogic Type 4 JDBC MS SQL
    Server driver replaces the WebLogic jDriver for Microsoft SQL Server, which
    is deprecated. The new driver offers JDBC
    3.0 compliance, support for some JDBC 2.0 extensions, and better
    performance. BEA recommends that you use the new BEA WebLogic Type 4 JDBC MS
    SQL Server driver in place of the WebLogic jDriver for Microsoft SQL
    Server."
    Do we have to install sp1 or sp2 to work with this driver. How can we get
    sp1 ,
    Thanks,

    Where did the Driver file place?
    You can copy the driver file to the JAVA_HOME/lib
    folderDo not put that JDBC JAR in JAVA_HOME/lib.
    You should put it someplace close to your app and add it to the CLASSPATH when you compile and run?
    Geez, doesn't anybody think about a standard directory structure to use for their apps? Put it in a /lib directory with the rest of your app stuff. - MOD

Maybe you are looking for