Canon 4000 IS troubleshooting lens error message will shut off automatically restart.

canon 4000 IS
lens error message will shut off automatically restart.
Does not resolve itself.

Hi Lidmar,
First, please try this:  Remove the battery pack from the camera and close the battery compartment.  Now Press and hold down the power button for 5 seconds.  Replace the battery pack and turn the camera on.
If your camera works normally, you're ready to start shooting.  If the issue persists, we recommend that you send your camera in for service.  You may arrange service for your camera here.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Itouch will shut off and restart everytime it starts to play, PLEASE HELP!

    I've bought my itouch, 2nd gen. about 1 week ago and have tried numerous of times to put videos into my itouch and although it appears and works on itunes perfectly fine, but whenever i play it on the itouch, it DOES NOT play but SHUTS OFF and RESTARTS itself. i've tried to RESTORE the itouch, restart it, and even made sure that my videos are in MP4 format but nothing seems to work.also, i've tried to upload various of videos butthe videos are not the problem. i have not dropped my ipod or damaged it in any way and it is still in its PERFECT condition.please help me to get my videos to start running on the itouch. thankyou so much!
    Message was edited by: itouch video help

    if you've tried all the troubleshooting steps http://www.apple.com/support/ipodtouch/troubleshooting/ipodtouch/
    then you need to take/send it to apple to get it checked out

  • CS2 gives login error message and shuts down automatically

    Hi,
    I hope someone can direct me to a quick fix for this because I just shot a wedding and need to be editing ASAP. I turned on PhotoShop CS2 and after loading it gives me the error message saying somehting to the effect of "Your username, login, organization, or serial key is missing or invalid. Photoshop must shut down". My copy is registered, and I have the loging info and serial , but I cannot do anything at all in the program. It doesn't give an option to re-enter my info. It just shuts itself down. I use it all the time and have had it on this computer since 06 so I have no idea why it's doing this now. Any help tonight would be great.
    Thanks in advance.
    Scott

    System specs, please. Is CS2 installed on a 64 bit operating system?
    Bob

  • SX40 HS with Lens error message

    SX40 HS has this message when I turn on the camera:  Lens error  Will shut down automatically  Restart camera  
    Any help on getting the camera to work?
    Thanks. 

    Here's what Mike, Canon's product expert in this forum, has recommended previously:
    Mike wrote:
    Try removing the batteries from the camera and letting the camera sit without batteries for a few minutes.  Then, install fresh batteries and power the camera on.  If you still receive the same error message, the camera is going to require service.
    To start your repair process, you'll need to complete a Repair Request on our website.
    This didn't answer your question or issue? Find more help at Contact Us.

  • Lens error message for S100

    I have a Canon S100. The lens will not retract. I get a Lens Error message. Will shut down automatically. Restart Camera.
    It is not shutting down, I cannot restart the camera.

    Dixic,
    Please remove the battery from the camera for a few minutes, then reinstall the battery and power the camera on again.  If the error is still displayed, then the camera will need to be repaired.
    To start your repair process, you'll need to complete a Repair Request on our website.
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Can't print to my Canon Pro-100. Get error message:There was an error opening your printer. Printing

    Can't print to my Canon Pro-100. Get error message:There was an error opening your printer. Printing functions will not be availableuntil you have selected a printerm and reopened any documants.

    Your printer driver is having problems.
    Resetting Photoshop's preferences sometimes clears it up (by removing previous print settings that the driver is supposed to read, but sometimes fails at).
    Otherwise you'll have to work with Canon to figure out why the driver is misbehaving.

  • Lens error message

    I have a PowerShot A495 camera. It has been working properly since I purchased about 2 years ago but recently a lens error message has been appearing on switching the camera on and it closes immediately. What could the problem and what should I do?

    Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
    Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
    Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
    Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
    Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
    Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
    Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
    Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
    I found the above by using a web search engine called "Google" by typing your camera brand, model number and "lens error" hope this helps. 

  • So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

    So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

    I've got the same issue and it affects all my adobe software.  You are not alone as I have seen several postings looking for the answer to this help request.

  • On a sx40. When I turn on camera I get Lens Error Will shut down automatically. Restart camera

    I need help.  I bought a sx40 camera on ebay.  After only a month of occassional use I now get a lens error message.
    It states Lens Error, shutting down automatically Restart Camera.  I have not dropped the camera or abused it in any way.  But there is a really loud screeching sound as the lens tries to come out but can't.  Anyone have any answers.

    yes first see if you can get the extended warranty thru Square Trade if its not to late or what the return agreement with the seller was...do that first. If you used PayPal they also offer automatic purchase protection too. Lens problems are not cheap to repair. Second use some compressed air and see if you can gently blow out and thing that may have gotten inside the lens assembly. Blow the air from inside the battery compartment and any other open space...the key it to blow anything out. Also blow the air around the lens assembly. That sound you hear is not a good sign.

  • When I double click run installation, then proceed to restart, I restart the computer,  but when it loads back up, I get an error message, saying I need to restart, whats wrong?

    When I double click run installation, then proceed to restart, I restart the computer,  but when it loads back up, I get an error message, saying I need to restart, whats wrong?

    I get an error message, saying I need to restart, whats wrong?
    That is a "kernel panic".
    Try here.  Resolving Kernel Panics

  • Iphoto not opening. error message sent to Apple automatically but no reaction so far. has anyone a similar problem?

    iphoto not opening. error message sent to Apple automatically but no reaction so far. has anyone a similar problem?
    All screen sabvers using Iphoto dossier stopped working and meade me aware of a problem with iphoto (from ilife 11).
    I reinstalled ilife 11, but it was not successful.
    Anyone got a good tip on this?
    Thanks, Michael

    I've been having the exact same problem. It started 4-5 days ago
    This is the error message i've been getting:-
    Process:         iPhoto [509]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.2.1 (9.2.1)
    Build Info:      iPhotoProject-628000000000000~3
    Code Type:       X86 (Native)
    Parent Process:  launchd [167]
    Date/Time:       2011-11-16 21:55:44.487 +0530
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          186902 sec
    Crashes Since Last Report:           9
    Per-App Crashes Since Last Report:   7
    Anonymous UUID:                      4A4FE4E1-35CB-46CA-962E-309E30C781D3
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: image not found
    Binary Images:
        0x1000 -   0xd1afeb  com.apple.iPhoto (9.2.1 - 9.2.1) <68601E93-E4CF-3B4C-AFFD-4781A92DD58B> /Applications/iPhoto.app/Contents/MacOS/iPhoto
      0xe83000 -   0xf63fe7  org.python.python (2.6.7 - 2.6.7) <61DBA92A-C39A-3A52-86F2-59CF9D310CB4> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
      0xfae000 -  0x114effb  com.apple.geode (1.5 - 151.51) <28D29759-F356-3608-B9CF-3031F3299B1B> /Applications/iPhoto.app/Contents/Frameworks/Geode.framework/Versions/A/Geode
    0x11ee000 -  0x11f0fff  com.apple.iLifePhotoStreamConfiguration (2.2 - 2.2) <4FA61CE9-1718-3E07-9896-0023A2A49699> /Applications/iPhoto.app/Contents/Frameworks/iLifePhotoStreamConfiguration.fram ework/Versions/A/iLifePhotoStreamConfiguration
    0x11f6000 -  0x1205fff  com.apple.iLifeAssetManagement (2.0 - 2.33) <8346DE35-5F86-3338-9913-B035B3EE5435> /Applications/iPhoto.app/Contents/Frameworks/iLifeAssetManagement.framework/Ver sions/A/iLifeAssetManagement
    0x1212000 -  0x123affb  com.apple.iPhoto.Tessera (1.1 - 60.10) <7BA9184E-0A00-3083-8322-772ECBDD30C9> /Applications/iPhoto.app/Contents/Frameworks/Tessera.framework/Versions/A/Tesse ra
    0x124b000 -  0x1272ffb  com.apple.iPhoto.Tellus (1.3 - 60.10) <4AABB0BC-AC97-3EE4-BF0F-D8499DDB57C0> /Applications/iPhoto.app/Contents/Frameworks/Tellus.framework/Versions/A/Tellus
    0x1287000 -  0x1291fff  com.apple.iphoto.AccountConfigurationPlugin (1.2 - 1.2) <3B68F126-D783-3F86-AF04-A0F6A459BE67> /Applications/iPhoto.app/Contents/Frameworks/AccountConfigurationPlugin.framewo rk/Versions/A/AccountConfigurationPlugin
    0x8fea2000 - 0x8fed49c7  dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
    Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.5 GHz, 2 GB, SMC 1.27f3
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xCE00000000000000, 0x4D342037305432393533455A332D43453620
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xCE00000000000000, 0x4D342037305432393533455A332D43453620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.11)
    Bluetooth: Version 4.0.1f4, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: Hitachi HTS542525K9SA00, 250.06 GB
    Parallel ATA Device: HL-DT-ST DVDRW  GSA-S10N
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1a100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5            "
    help would be much appreciated.
    Regards,
    Thimayya

  • HT201210 I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks

    I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks

    simply try doing a back up and restore
    when going thru the activation screen, select SET UP AS NEW and then test your device. if it is not shutting down then it could be 1 or more apps tht have been downloaded wch could be affecting the device
    you will then need to follow the process of eleimnation, meaning add 2 apps and then monitor your phone, if nothing happes then add another couple of them and then check
    good luck !!

  • When I try to start Firefox, I get the error message "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" I have rebooted several times to no avail. Get the same message when I try to uninstall Firefox

    When I try to start Firefox, I get the error message "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" I have rebooted several times to no avail. Get the same message when I try to uninstall Firefox

    Just had this same problem. Based on other suggestions I found on the web, went to C:\Program Files\Mozilla Firefox and deleted all files that ended with upgrade and/or delete. Then I was able to uninstall Firefox and then reinstalled. Hope this helps!

  • HT3964 I am getting the error message "No AirPort card installed" Restarting my iMac desktop does not solve this (Apple help says I need to reset the SMC this way, but nothing changes. Can somebody advise, please?

    I am getting the error message "No AirPort card installed" Restarting my iMac desktop does not solve this (Apple help says I need to reset the SMC this way, but nothing changes). Can somebody advise, please?

    Thanks for the flag J.K. - they contaced me and solved my problem.  On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!

  • During the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

    during the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

    Follow the instructions here > http://support.apple.com/kb/HT1808
    You may need to try a few times to get it to work

Maybe you are looking for

  • Automatic scheduling of the automatic payment programme

    Hi All, My client would like to set up different ways of running the automatic payment programme. They have different payment methods which mean different things. First option: They would like payment method P1 for example to run every Mondays and th

  • An IOException was thrown trying to access the WSDL at the given URL.

    Hello I deployed webservices on weblogic 8.1.5. I defined Security policy on webservices. The server is allowed to access from both inside and outside our domain. When I access with internal ip address, trying to test methods from Launch Test Page fr

  • Error adding new business partners

    Hi all, When we try to add new business partners, we get the system error message stating "Accounts receivable/payable is missing [Business Partner - Accounts Receivable/Payable]  [Message 3502-14].   This is a bit of a worry as it does note happen i

  • SAPGUI iview from SAP Portal = create new session  results in empty screen

    we use ep700 sp10 and sapgui 6.40 compilation 5 . we have a sapgui iview which starts the login to the R/3 system and shows the user menu with some transactions. if the user now creates a new session  with the buttom "create new session" in the sapgu

  • Mails are not received  through Oracle   Alert

    Hi , User is not getting the mails after submitting the alert through concurrent request but concurrent is getting completed normal. Regards, Kavitha