Canon 40D point of clipping
Unfortunately I did not make following tests early enough to report the findings before ACR 4.3 has been closed, but I hoped that Adobe made some better effort in the meantime to accomodate this camera. Anyway, there is always a next version.
The issue is the White Level setting. I see this explicitely in the DNG files, and the processing of the originating raw files with ACR reinforces the findings:
the white level/clipping point settings are TOTALLY off.
The currect setting is 13600,
at all ISOs.
The actual clipping points are, roughly:
ISO 100: 13824, 125: 16383, 160: 12745
ISO 200: 16224, 250: 16383, 320: 12743
ISO 400: 16224, 500: 16383, 640: 12742
ISO 800: 16223, 1000: 16383, 1250: 12743
ISO 1600: 16224
ISO 3200: 16383
A more detailed report can be seen at http://forums.dpreview.com/forums/read.asp?forum=1019&message=25645921, although those details are rather of technical interest, not necessarily involved in the raw image processing considerations.
Hello,
I got this one
http://www.amazon.co.uk/H%C3%A4hnel-Remote-control-cameras-HWC433/dp/B0019UUYLA
I actually purchased it in Jacobs itself (I needed to see it would work, and
be confident I was nt buying a pig in a bag.)
http://www.jacobsdigital.co.uk/index.php?target=products&product_id=142454
as reviews I have read a few times stated the batteries they can come with
are usually dead etc. but not in my case.
It works, simple to use and with 4 channels. It works with all canon cameras
and it seems robust enough for purpose. It was not cheap at the £49 but it
was a struggle to find suitable quality.
cheers
Kenny
Similar Messages
-
Cannot open SRaw files from my Canon 40D can open Large Raw files
Hello,
I use Windows XP. I have Adobe Photoshop CS3 Extended. I use Canon 40D. I have run updates in Photoshop and all is updated (I have ACR 4.2). Camera raw only appears once when I look at About Plug-In. I am not able to open the small raw files, but I am able to open the large ones with Camera Raw in Photoshop.
Has anyone else experienced this? Can anyone help?
Thanks! LindaJeff,
I also put a level of responsibility on Canon
"Please be sure to place _ALL_ of the responsibility on Canon...it's THIER firmware. "
FWIW, I did lace into Canon Tech support today about two major pieces, first the lack of any information regarding the update. Spoke to a supervisor. He claimed that being only out there a week was not enough time for them to get informed. I reminded him that he should probably add another week to that allowing build time to get the cameras loaded with the new FW and out to distributors, and that 2 weeks was more than enough time for them to hear something. With regard to the "responsibility of the RAW software company to be code to new cameras" I reminded him Adobe already had and it was working fine with the 40D and that their "point release" which no one seems to be able to find (except on the cameras) broke what was working. The Saga sadly continues...
Jay S. -
Brand New Nikon D3,D300,Canon 40D,5D mark 11
DIGITAL CAMERA VILLAGE. is a certified wholesaler of various brands of mobile phones, video games,laptops and digital Cameras.
Shipping world wide via FedEx 48hrs Shipment 2days delivery with all shipping confirmation details given.
For more enquiries contact : [email protected]
1. Complete accessories(Well packed and sealed in original company box)
2. Unlocked / SIM free.
3. Brand new (original manufacturer) box - No copies
4. All phones have english language as default
5. All material (software, manual) - car chargers - home chargers - usb data cables-holsters/belt clips - wireless
headsets(bluetooth) - leather and non-leather carrying cases
- batteries.
Apple iphone 3G s 16gb S$300
Apple iphone 3G s 32gb S$350
Apple iphone 3G 8gb S$280
Apple iphone 3G 16gb S$350
BLACK BERRY PHONES
BlackBerry Storm 9500 : $230USD
BlackBerry Storm 9530 : $300USD
BlackBerry Bold 9000 : $30USD
DIGITAL CAMERAS
Brand New Nikon D3 12.1MP DSLR Camera +Nikon AF-S Nikkor 24-70mm f/2.8G ED 24-70 Lens
Price:$1000
Package Content:
1 Nikon D3 DSLR Camera Body
1 EN-EL4a Battery
1 MH-22 Charger
1 USB Cable
1 Software Suite DW01
1 User Manual
1 AV cable
1 Neck Strap
Brand New Nikon D90 12MP DSLR Camera with lens
Price:$500usd
Package Content:
1 Nikon D90 DSLR Camera
1 EN-EL3e Rechargeable Battery
1 MH-18a Quick Charger
1 DK-5 Eyepiece Cap1 DK-2
1 Rubber Eyecup
1 UC-E4 USB Cable
1 EG-D2 Audio Video Cable
1 AN-DC1 Camera Strap
1 BM-10 LCD Monitor Cover
1 Body Cap
1 BS-1 Accessory Shoe Cover
1 Software Suite CD-ROM
Brand New Nikon D300 12MP DSLR Camera with lens
Price:$800usd
Package Content:
1 Nikon D300 DSLR Camera
2 User Manuals
1 Software Suite
1 AV Cable
1 Mini USB Data Cable
1 Power Cord
1 MH-18a Battery Changer MH-18a
1 EN-EL3e Li-ion Battery
1 Neck Strap
Package Content :
1 Canon EOS 40D Camera (Japanese Model)
1 BP-511A Battery Pack
1 CB-5L battery Charger
1 Strap
1 Power cord
1 VC-100Video Cable
1 IFC-200U Interface Cable
1 Wide Strap EW-100DGR -EOS DIGITAL Solution Disk (CD-ROM)
1 Software Instruction Manual (CD-ROM, PDF)
1 EOS-40D Digital Instruction Manual
ADDITIONAL UNITS INCLUDED BELOW.
CAMERAS
Brand New Nikon D700
Brand New Nikon D40
Brand New Nikon D40x
Brand New Nikon D60
Brand New Nikon D80
Brand New Nikon D90
Brand New Nikon D200
Brand New Nikon D300
Brand New Nikon D3
Brand New Nikon D3X DSLR
Brand New Canon 1000D
Brand New Canon XH A1
Brand New Canon 40D
Brand New Canon 400D
Brand New Canon 50D
Brand New Canon 450D
CANON EOS-1D Mark II-N 8 Megapixel Digital….$900USD
Canon EOS-5D Digital , 12.8 Megapixels…….$500USD
Canon XH A1 1.67MP 3CCD Camcorder with 20x Optical Zoom…$800USD
Canon XL2 3CCD MiniDV Camcorder w/20x Optical Zoom……$800USD
Canon XL1 Digital Camcorder Kit…………$600USD
Canon EOS 1D Mark II N 8.2MP Digital SLR Camera….$850USD
Canon Camera Kit 1234B002…………$350USD
Canon EOS 30D Digital SLR Camera & Canon….$550USD
For more enquires do contact via Email:
[email protected]
ThanksDrop-shadows
Drop-shadows under images both in Loupe and Grid view on Windows (only on Mac before). Though, in Loupe mode, they are somewhat buggy (they don't show until you zoom in and out) and jerky (as you move through the images, there's a visible lag between drawing the picture and it's shadow).
Responsiveness in Develop
Also, I was surprised (and what a nice surprise that is) to see that the changes applied in Develop module are now applied almost real-time! If you look carefully in 1:1, you can see that the changes are first reflected by a lower quality proxy images, then, in a fraction of a second, re-rendered on the actual image. At least on my machine it was much slower before. -
Any news please on when the Camera Raw plugin will be upgraded so it can read and load the new Canon 40D Camera raw files?
and Sraw files (though this is not so important)Ramón, it's OK to be a satisfied customer but you come across as some sort of wild-eyed, fan boy-cheerleader. Jeff or Thomas have merely to utter a word and you're there confirming it and acting tough. I mean how many times have you reminded readers who Thomas Knoll is? How can you be a "user" if you have time to respond with hundreds of posts in a short period of time?
So can you just cool it a bit? The forum will be OK without you defending Adobe's honor on every other post. Thomas and Jeff are big boys and they can take the punishment. There are times when users, including me, are upset at Adobe about some issue. Your "LET ME TELL YOU SOMETHING!!!" attitude doesn't really add to the conversation at that point.
I usually avoid personal attacks but enough is enough. Just settle down and relax! The world's leader in image manipulation software is going to take some heat occasionally. It's their software and their job to answer users' questions. -
Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIEIn short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
Just bought Canon 40d - Use CS2 - Cannot read Raw files in Bridge
Heading says it all really. Just purchased new Canon 40D Body and have been using CS2 on Mac OS 10.4 for over two years. Cannot read RAW files in Photoshop Bridge which is what I have used consistently with 20D files up to now. Quick search on Google brought up fact that Adobe had not up upgraded Bridge to read new 40D files but that was 2 years ago. Am now looking for plug-in! Can anyone help or am I now forced to upgrade my CS2 or move away to Aperture or Lightroom? Any help gratefully received. Rob
The 40d is not supported by any version of Camera Raw that can run in CS2. You need at least CS3 and ACR 4.2 or greater.
Dowload the free, stand-alone Adobe DNG Converter 5.3 and convert the raw files from your 40d to raw DNGs first, then you can open the DNG files in ACR 3.7 hosted by CS2. -
What is the BEST way to get my macbook with lion on it, to communicate with my Canon 40D camera? It says the utility disk is a PowerPC app and that is no longer supported. What do I do now? I can't upload photos from my camera.
Also, I had the same problem happen when I tried to install an older version of Corel Painter. Are Macbook Pro users just NOT supposed to be able to use their laptops for the purposes they are best designed for?
-Frustrated new Mac user -
FCP 7.0.3, Canon XF100, saved some clips to a portable hard drive and now they won't import? Tried moving them back to the CompactFlash but still won't import? iMac, 10.6.8
Well, for FCP to see this file structure and recognize it, you need to download the Canon XF Log and Transfer plugin...
http://software.canon-europe.com/software/0040354.asp?model=
>I don't have the original clips on the card.
Meaning that they didn't back up the full card structure? Lordy...very few shooters do this and it is maddening. If you don't have the full card structure, even with the plugin, FCP cannot log and transfer.
As for ClipWrap2...that should work. Do you have the right files? -
RAW import from Canon 40D to Elements 4.0
I have a Canon 40D camera, and still use PE 4.0. I am unable to import my raw files - help! I have downloaded and installed the camera raw 3.7 plug-in. What am I missing? Any advice welcome. Many thanks...
If no-one else comes up with an answer have a look at my thread under the RAW Issues forum
m. It may or may not be of help. It's entitled "Opening Raw Files saved as DNG"
The title might not seem to relate to your question but I think you may be suffering from the same problem I had . If not I'm sure some kind soul will come to your aid.
If nothing else it may pay you to post your thread under the Raw Issues forum rather than let it get lost where it is.
Good luck, James -
Camera Raw 4.4.1 still unable to preview Canon 40D CR2 files
Even after installing Camera Raw 4.4.1 plugin update as per installation instructions and purging central Cache...I am still unable to preview Canon 40D Raw (CR2) or Digital Negative (DNG) files on CS3 Bridge or Photoshop.
Does anyone have any suggestions? Thanks.Jeff..thanks for your helpful feedback. OS used is Vista. After recieving your suggestion I confirmed that I saved the plug-in to Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats - and then rebooted the system. This seemed to resolve the problem and i can now preview raw file.
Jeff, thanks again. Cheers, Doug -
When will Aperture support RAW from my Canon 40D?
In the meantime how should I handle my RAW images? Can I import them into Aperture now with metadata attached and when the support is there all my photos and metadata will appear?
Any help is greatly appreciated.The first question has been asked many times in the last 4 weeks and there's no answer. Ask more and Apple will lock this thread.
Second question. If you shoot RAW only, Aperture will import the file, and you won't be able to see it or work with it. You can export it to use Canon's DPP, Photoshop or other available converter to process it, save it to TIFF or JPEG, and then reimport to Aperture for now.
If you shoot RAW and JPEG, Aperture will import both files, but it's not apparent where the JPG file is. Control-click or right-click the grey square thumbnail or the reddish main window, and click "New Version from Master JPEG" to reveal the full-resolution JPEG image the camera took.
When OSX starts supporting 40D in the future, those RAW files will automatically be shown inside Aperture. -
Point cloud clip doesn't return anything in the result table
Hi experts,
I am wondering why my point cloud clipping function does not return anything into the result table.
The boundaries of my point cloud are:
min long 316,500
max long 316,643.21
min lat 234,000
max lat 234,105.38
min elevation -4.79
max elevation 30.87
For the ind_dimquery I have tried different geometry types, like 3003 and 3008, usually with the elem_info_array (1,1007,3)
like in the following example:
SQL> declare
2 inp sdo_pc;
3 begin
4 select pc into inp from base109 where rownum=1;
5 insert into restst
6 select * from table(sdo_pc_pkg.clip_pc(
7 inp,
8 sdo_geometry(3003, 29903, null,
9 mdsys.sdo_elem_info_array(1,1007,3),
10 mdsys.sdo_ordinate_array(316510, 234080, -3, 316550, 234100, 2)),
11 null, null, null, null));
12 end;
13 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.20
SQL> select count(*) from restst;
COUNT(*)
0
What am I doing wrong? This should be a query window within the right area and I know that at least one point lies within this defined window.
Any help is greatly appreciated!!!!!
Cheers,
F.yes exactly, I have tried all of this already.
For a further example, there is a point in:
POINTS(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDINATES)
R G B I POINT_ID
SDO_GEOMETRY(3001, 29903, SDO_POINT_TYPE(316503.49, 234089.46, 3.32), NULL, NULL
71 91 78 70 55
so theoretically, I'd feel that at the VERY LEAST this point should be in the 3008geometry and 1007 elem array for the coordinates for xmin, y min, zmin, xmax, ymax, zmax for
316500, 234080, 2, 316510, 234100, 5
but...nothing. Nothing in the result table.
For full query:
SQL> declare
2 inp sdo_pc;
3 begin
4 select pc into inp from base109 where rownum=1;
5 insert into restst
6 select * from table(sdo_pc_pkg.clip_pc(
7 inp,
8 sdo_geometry(3008, 29903, null,
9 mdsys.sdo_elem_info_array(1,1007,3),
10 mdsys.sdo_ordinate_array(316500, 234080, 2, 316510, 234100, 5)),
11 null, null, null, null));
12 end;
13 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.13
SQL> select count(*) from restst;
COUNT(*)
0 -
No preview for Canon 40D Raws?
Hi,
I got a problem with my new Canon 40D. Everything works fine, Lightroom supports the Camera Raw but there are no previews shown in the import dialog.
Sometimes i got pictures on the camera from different locations or shootings and seeing which pictures to import where would be helpful.
If i shoot jpegs they are shown, but i really don't need them and they do only waste the space on my memory card...
Is it a known problem? Will it be resolved in the next version? Or can i do anything to make it work?
By the way, i tried to install Microsofts RAW Image viewer to get previews in the explorer but here i got the same problem - it seems not to be able to read ma Raws.Hello and thank you
first to ElliR - i tried dbmagic and it shows the previews in windows explorer - thank you very much. Unfortunately it does not support filmstrip view. Do you know if the next bigger version (plus) does this?
Back to my origninal question: it is definitly a thing between the camera and windows!
I'm shooting "full size" RAWs and when i connect the camera to my PC, i do not have previews in Lightroom or in windows explorer (even with the above dbmagic installed).
When i put the memory card (extreme III 4 GB) into a card reader connected to the PC both are working: i see previews in Lightroom as well as in windows explorer (i didn't try that earlier).
So it seems to be windows/microsoft to be the "guilty" - does it make any sense to report this behaviour to microsoft or anywhere else?
For my personal workflow i would prefer not always to fumble the card out of the camera, search my card reader and so on. -
Cannot recognize Canon 40D RAW file
My Photoshop CS3 Extended cannot recognize the raw files generated in my Canon 40D, however this camera is on the list of recognized cameras. This camera generates files with extension .cr2. I downloaded the updates to photoshop CS3 and the DNG Converter 4.3.1, but still no luck. I am working on a Mac, if that makes any difference. Any suggestions on what else I can try?
Thanks.>I downloaded the updates to photoshop CS3
Did you also download, decompress and correctly install the ACR 4.3.1 plug-in, replacing the old one in the same location? Are you sure you downloaded and install the Mac version of said plug-in and not the Windoze version?
When you go to the Photoshop menu > About Plug-in , does ACR 4.3.1 show up there and only once?
Did you purge the Cache for each folder through the Tools menu in Bridge after that?
All of that has to be done precisely according to the very detailed instructions.
http://files.myopera.com/cperaloca/albums/92592/Path_to_ACR_in_CS3.jpg -
Canon 40D RAW (CR2) Files import
I've Photoshop and Aperture. Cannot install Elements which would be my preference - so help needed here.
Also - I use iPhoto mostly in the latest Apple OS, yet I cannot import Canon 40D RAW files. I get an error message saying they could not be imported - import failed.
Help please.
FreshacreFreshacre:
Welcome to the Apple Discussions. What version of PS Elements are you trying to install? I've installed the PSE 6 demo without any problem.
What type of files are you trying to import and from where?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Maybe you are looking for
-
How can I create an interactive form in Captivate 5?
Hello... I'm creating a Captivate project for an elearning course that will be posted to an LMS. I'd like to create an "Action Plan" at the end where users can click various actions they want (from a list) and then print that page to use as a take-a
-
A135-S4527 - DVD Drive won't read CDs but works with DVDs
My Toshiba Satellite A135-S4527 is running Windows Vista Home Premium with SP1. It has a MAT**bleep**A DVD-RAM UJ-850S ATA Device DVD/CD-ROM drive (from System Information). It will not read CDs in the drive anymore. It doesn't give an error or anyth
-
my phone was being stealth by someone. can you make my iphone disfunctional? because i can't detect my iphone anymore..
-
OC4J 904 and Unicode(AL16UTF16) in NVARCHAR2 column
I have: OC4J 904 standalone runs on Windows2000 AdvancedServer. Oracle 9i JDBC thin driver shipped with OC4J NLS_NCHAR_CHARSET = AL16UTF16 (NLS_CHARACTERSET = VN8VN3) I have a table with a NVARCHAR2 column. I created a CMP EJB from the table but I ca
-
I need help. I know the basics of GUI programming.. i plan to use JBuilder's drag-and-drop development to create a checkers game for a software engineering class that i am taking at ASU. I have not played around with swing for about a year; i need he