Canon 500D and Snow Leopard 10.6.2

After I upgraded to Snow Leopard 10.6.2 my Digital Camera Canon500D is not detected anymore...although i removed its driver and installed it again ..no improvements still not detected either in Finder or with canon utilities or Iphoto or aperture.
Any suggestions.

I'm not familiar with your model (in fact, I couldn't find a 500D on the Canon support site), but I have a Canon SX1 IS and had a minor problem with the Canon software no longer being compatible with Snow Leopard. Canon has since updated that software (Digital Photo Professional). Or what type of software are you referring to - I'm not aware of having to install any driver. If you plug it into the USB port, it should just show on your desktop. Another possibility is to simply use a card reader for now with your USB port - that is how I transfer all the images. As soon as you plug that in, you should get the reader's icon on your desktop and you can copy/transfer/download the images from there.

Similar Messages

  • Canon printer and Snow Leopard

    I recently upgraded to Snow Leopard and have now spent up to 8 hours trying to get my Canon MX 340 working again.  I checked the printer log and it said that the printmanagerfailed, I found a topic here about the same problem and it stated to go into system preferences and right click the canon printer and to select reset printing system.   Well I did that and it wiped out all my printers so needless to say that didn't work. Now I can't get it setup at all.  I have reloaded all of the drivers and software and it isn't even showing up in my system preferences so I can't add it.  I am pulling my hair out and really really need some help.  HELP! 

    Why would I go to HP printer support, it is a canon printer and yes I did download Canon's driver, what a joke.  I have found some information on this forum but so far no good.  At least I now have it showing up in systems preferences but still not working.  I wished I had checked all this b4 upgrading since I may not have done it.  I have downloaded the Apple supplied driver so if anyone out there knows what to do now I still need help.

  • Canon iP5200 and Snow Leopard - Color Management

    I was wondering if anyone knows how to completely disable color management when printing using Photoshop CS4 and a Canon iP5200 with the very latest driver 10.26.0.0?
    I've seen this link on the Apple website which to me implies that if I set Photoshop CS4 to "No Color Management" and select "Colorsync" under "Color Matching" in the print driver then all color management is switched off, including that of the printer:
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8641.html
    This is also what Canon support told me, but is this correct, I'm somehow not convinced? The latest print driver with Snow Leopard has no specific option to turn off color management in the print driver.

    What you should do is select Color Matching and set this to 'Canon Color Matching'. This will then let the printer control the colour management.
    Note that the colour profiles for the Canon printers are based on the paper stocks used. And the papers that have the largest gamut are the photo papers. So, after setting the Canon Color Matching, open the Quality & Media menu and select the appropriate paper you are using and the Print Quality to High. But don't expect good output if you are using plain paper. Only photo papers should be used with the photo modes.
    Pahu

  • Canon MP600 and Snow Leopard

    Hi, does anyone know if the MP600 works with snow leopard? Canon says it's compatible but their drivers are not working at all. Are there drivers available even??? Thanks

    I'm printing just fine to an MP600, though I have it connected to an older Leopard machine and am printing from the SL machine wirelessly. I lose some functions that way, and can't get a decent photo print unless I do it from the Leopard machine (not sure exactly why), but for everyday printing it works great.
    One issue you might be running into is that there are two different drivers for the MP600... you want the CUPS printer driver, not the other one.

  • Wireless print server DPR-1260/Canon i9900 and Snow Leopard 10.6.1

    Hello,
    I have recently got my Mac Book Pro and have the latest system (10.6.1) and cannot print with a wireless print server. I have a Dlink DPR-1260, and a Canon i9900 printer. I have done everything and I still cannot print. Please I need help!!!!
    Susan

    Hello Susan and welcome to Apple Discussions.
    Unfortunately the Canon Mac drivers have never worked correctly with the wireless print servers. I tested a Dlink model some years ago and while the Windows drivers for the same model would work fine, the Mac driver would always fail.
    The only solution was to use the Gutenprint driver suite for Mac OS X. This software provided drivers for many brands of printers including Canon, and got our A3 inkjet working - albeit it wasn't always available as it seemed to never wake from sleep mode.
    Checking the Gutenprint drivers included with 10.6, which are added when you do a custom install or by running the Optional Installer package within the 10.6 DVD, the i9900 is not listed as a supported model. It appears that only the Canon version of the i9900 driver is included with 10.6.
    So, you have some decisions to make...
    1. Don't use wireless and just have the i9900 plugged in directly to the Mac via USB
    2. Replace the Dlink with an Airport Express. Due to the way in which Apple has made their Airport units, they will let you use the Canon driver.
    3. Keep the Dlink and purchase an alternate driver software package called Printfab. If you are printing mostly graphics on the i9900 then this driver suite can provide you with more colour control than the Canon driver. And it will work with the Dlink like the Gutenprint drivers do.
    Hope this helps
    Pahu

  • Canon MP560 and Snow Leopard

    Hello... today I set up a new Canon MP560 multifunctional printer/scanner. I didn't use the set up disk, but downloaded all the latest drivers from the Canon Support site. I've also installed the "Canon Drivers" package from Software Update. The good news is that setting it up as a wireless printer was very straightforward. You can join the network from the control panel on the printer itself, entering the WPA key, and then it appears in Print & Fax - first as "Bonjour Scanner" and secondly, after a while, as a "Canon IJ Network" printer when you click "more printers". However, no matter what I do, I can't get Image Capture or the Canon scanner software to recognise it as an available scanner. However - and this is the bizarre bit - if I use File --> Import --> Canon MP560 in Photoshop Elements 8, I can scan straight into Photoshop TWAIN import. And if I scan FROM the control panel on the MP560, I can send the scan to the Mac as an image or as a PDF. So "network scanning" clearly is POSSIBLE over the WiFi network, just not using Image Capture, and the Print & Fax control panel is not seeing it as connected either (when you click the "Open Scanner" button in the control panel, it pops up a big box with "No scanner available" in the middle...)
    Anyone got one of these working properly in Image Capture and able to tell me what to do?
    best regards,
    Matt

    Hello Matt,
    I don't have access to my MP980 which is on wireless to check this, but if you use Preview (which uses Image Capture) and select File > Import from Scanner, do you see 'Include Network Devices'. I seem to remember having to use this menu to scan from the MP via network.
    Also, with regards to the Print & Fax > Open Scanner operation, I think you need to install the MP Navigator EX 3.0 Opener application to resolve this symptom. You can download this app from here.
    Pahu

  • In limbo between Leopard and Snow Leopard - stupidly didn't back up

    I've got an old-school black MacBook, about four years old now. I never cared enough to upgrade it to Snow Leopard, but now I want Lion. So, I borrowed my parents' five-license Snow Leopard install disc and started off on the journey to upgrade to Snow Leopard, download the App Store update, then download and install Lion. I didn't get far.
    First, let me say that I didn't back up my hard drive. Like an idiot. Yes, I know it was stupid, so there's no need to say anything. My previous installs (a few clean re-installs) have gone without a hitch, so I figured I'd trust Apple and just run the installation without backing up. Dumb.
    The Snow Leopard installation started fine, but was interrupted when the installer said the install failed. Restart, try again. Booting from the install DVD, things seemed to be going fine a second time around -- picked my language, got to the install set-up screen, picked Macintosh HD as my installation drive. And then things stopped working. The installer said my HD could not be written to and that it needed repair. So I went to Disk Utility to try that. Repair Disk wasn't available, so I clicked Verify Disk. That got interrupted when it said the disk needed to be repaired, after which the Repair Disk button was clickable. Tried to repair, but apparently my HD is screwed beyond the capabilities of Disk Utility.
    I tried to reboot the MacBook from the HD, which Disk Utility said still had Leopard running on it. The computer wouldn't boot up. Safe Boot didn't work. So, without any other real options, I thought I'd try my luck by just trying the install again. Booted up from the install DVD, and ran into the same issues. Didn't magically fix itself, of course. So my MacBook is stuck in limbo between Leopard and Snow Leopard, won't boot from the HD and won't let me repair the disk when booted from the DVD. What do I do?
    I plan to try a couple third-party disk-utility programs tomorrow (8/25/11) to recover the files on my HD. There's not much I care about on there (just some iPhone photos and my resume, really), so doing a clean wipe of the HD and installing Snow Leopard is an option. But I'd of course rather be able to recover my personal files. Is this possible at this point?
    Another question I have regarding a clean wipe: If I end up having to clean off the HD and lose all my data, I'll lose the iTunes configuration for my iPhone. Will iTunes be able to import my apps and settings from my phone if I plug it in?
    Thank you very much.

    For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
    Or OWC  http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
    Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

  • I tried copying a photo and pasting it in another event/group within iPhoto but the paste feature doesn't work.  This wasn't an issue with both Leopard and Snow Leopard.  Do you have any solutions or tips?

    I bought a new MacBook Pro with OsX Lion as operating system.  I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work.  This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked.  What I did was to paste the photo first to the desktop before transferring it to the new event/group.  I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work.  Chalked it up to glitches in the Lion os.  So how do we fix this?  I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users. 
    Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening? 

    Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
    LN

  • CAn I run Lion and snow leopard on the same computer with different sign-ins?

    CAn I run Lion and snow leopard on the same computer with different sign-ins?

    Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

  • New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard. Computer won't even acknowledge the iPod.

    New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard (10.6.8). Computer won't even acknowledge the iPod. Have restarted both, changed ports, etc. What's do I need to do?

    Have you tried here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Do not forget the Additional Information topic.

  • IPod touch second generation.  Trying to sync to mac.  Have updated itunes and snow leopard.  When I plug it in, it is recognized in iphoto, not itunes.  ipod is freezing.  Have tried several times to set back to factory settings, but computer wont see it

    iPod touch second generation.  Trying to sync to mac.  Have updated itunes and snow leopard.  When I plug it in, it is recognized in iphoto, not itunes.  ipod is freezing.  Have tried several times to set back to factory settings, but computer wont see it

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

    Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

    When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from  Camelotand Matt Clifton
    Could it be that CORRECT ANSWER needs better defining by Apple?
    That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
    Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

  • Aperture 2 and 3 and Snow Leopard

    My system with Aperture 2 was perfect.
    Then I believe that Snow Leopard killed Aperture 2.
    When I first installed Snow Leopard my machine felt like new again but slowly and slowly over the last few months the whole system seems to feel less and less snappy.
    I don't use many video-intensive applications - my main one is Aperture 2, so this is where I find my main cause for concern.
    Painfully slow adjustments with lagging, beach-balling, CPU-hogging, and RAM theft.
    The main culprits seem to be Highlights/Shadows, Straighten, Crop, and Retouching… although my open mind says that could simply be because they form the latter part of my tweaking process.
    There seems to be a thumbnail generation issue. Every adjustment that is made generates a new thumbnail - as you work through your tweaks that process seems to get backed up and slow everything down.
    There seems to also be a video issue. Tweaking horizontal photos in full screen causes twice as much lag as a vertical image. Why? Take a look - it's obvious - in full screen edit a vertical image is about half the size of a horizontal one.
    There seems to be a memory issue. Aperture seems to use a large amount of processor and RAM and sometimes doesn't let go of it or it gets caught in some kind of a loop. I've no idea what I'm talking about here. All I know is when I look at Activity Monitor the numbers are going through the roof and I can barely concentrate on them because of the noise from my fans.
    There have been various and quite diverse suggestions on this and other forums as to what the underlying problem is and I have done my best to look into those and see what can help.
    I have an early-2008 MBP 4,1 - 2.6 Intel Core 2 Duo - 4GB (factory-fitted) RAM - GeForce 8600M (512MB) GT.
    I have done everything possible: all software totally up-to-date, re-installed combo updates, rebuilt Aperture libraries, run consistency checks, fresh Aperture install, fresh Snow Leopard install, repaired permissions, booted in 32bit, booted in 64bit, run hardware tests, deleted plists, cleared caches, downloaded and run applications like Onyx and Snow Leopard Cache Cleaner (amongst others) to ensure everything is in ship-shape along with various test applications to gauge if components like my hard drive are dying.
    I keep my system clean and tidy. I have now stripped out bloat. I even took out iPhoto in case its 'iLife' browser link to Aperture was an issue. I have 85GB free on a 200GB. All components are original as factory-fitted by Apple.
    Everything that any seemingly intelligent person on any decent forum has suggested has been done - in particular I thank the many users here on the Apple forum for all their information sharing… I try to read them all.
    From what I see on the forums, I am not alone.
    Nothing has fixed this problem.
    I (and no doubt many others) have fed this information back to Apple.
    Aperture 2 and/or Snow Leopard has a problem that has not been fixed.
    Aperture 3 got released and I trialled it and swiftly uninstalled it because the exact same problems are there - even with one single photo in it.
    My concern is that Apple will not fix the cause of the problem which seems to lie outside of Aperture.
    If Apple concentrate on making Aperture 3 work better inside a possibly shaky Snow Leopard then I will be very disappointed.
    I'm not forking out for a new version of software just because Apple broke my current software. Don't get me wrong - I do actually WANT to buy Aperture 3 because it has functional improvements and advancements that I would love to be using providing it works properly - and for me (and it appears for 'quite a few' others as well) it just simply doesn't… and neither does Aperture 2 any more.
    I am no technical expert (as you've probably noted already) but a MAJOR bug seems to lie in the relationship between Snow Leopard, graphics cards, and the way it handles memory - and so in turn graphically-intensive applications like Aperture are high-lighting these problems more than others.
    I am sure there are people without these problems. Perhaps these problems relate to specific hardware configurations. My configuration is Apple standard. I really shouldn't have these problems.
    Until Apple fix this major bug I cannot remotely consider Aperture 3.
    Until Apple fix this major bug I could never buy Apple again.
    Up until Snow Leopard you had a VERY happy camper. I had a perfect machine and I was shouting Mac from the rooftops to anyone that would listen.
    And then it seems Snow Leopard broke my machine.
    What a shame.
    I really want to use Apple, I actually really like Snow Leopard, I really want to use Aperture, I really want to carry on telling people how wonderful the Apple Mac experience is (or was...) but Apple are currently making it very difficult for me to continue doing so.
    Please fix Snow Leopard.
    This will hopefully fix Aperture 2 and Aperture 3.
    Unless anyone else has a fix?
    Sincere apologies to all for banging on for so long !!

    Thanks for your input setwart.
    When I make adjustments I do want Aperture to provide me with a new version so that I can see the original image and also that I have a version which I have already adjusted. I've previously tried changing that preference before with no improvement in performance unfortunately, but it's not really what I was referring to.
    Versions, thumbnails and previews were very confusing terms to me for a while… actually, in some ways, they still are but my understanding is 'a little' better now.
    That said, I probably used the wrong term.
    What I meant was that every time you make an adjustment Aperture seems to produce a 'record' or 'snap-shot' of your image including that latest adjustment. In so doing you have an entire history of each adjustment you have made. In my head I picture this like a movie film-strip with each frame differing slightly. You increase your saturation by a single point? Another snap-shot. Fancy another single point on your saturation? Another snap-shot… and so on.
    It is typical that I will make a bare minimum of 20 adjustments on each image, and that's before even thinking about straightening, cropping, and retouching… and then maybe I'll go back and tweak everything again !!
    Somehow, my system is having difficulty in keeping up to speed with all of those snap-shots of individual adjustments. Certain adjustments will drastically slow things down more than others, and then I get to play with the beach-balls.
    But - it used to handle these things just fine and that's what I'm trying to get back to.
    Thanks again for getting involved.

  • Dual boot drive - Mountain Lion and Snow Leopard - Correct order to load software /apps?

    Hi
    I want to create a dual boot drive for Mountain Lion and Snow Leopard as some of my hardware (is not supported in Mountain Lion). 
    I am happy how to do this, I just want to know if there is a correct way to install software and apps.
    My plan was to do a clean install of both using two partitions, the larger going to ML and smaller one for SL.  I was going to install SL from the DVD and then after updating from 10.6. to 10.6.8 and download ML from the app store and install on the larger partition.
    Do I install all the software I use like Final Cut, Aperture, iLife (for Garageband) etc on the ML or SL partition or on both.  Also, is there a better way / practise of the order software updates / apps and boxed software should be installed when doing a clean machine install.
    Thanks in advance.
    Matt

    Thanks mende1
    So, if I have software I need to use on both ML and SL - for example Final Cut as I have a Canopus AVDC box which is not supported in ML but only SL, do I need to install the same software in both OS?
    I usually open apps using spotlight and didn't know if it would software / apps would open if already installed on the other partition?
    Thanks again
    Matt

  • Best practice for iCloud across Lion and Snow Leopard

    Hi all,
    I'm not going to bleat about SL not supporting iCloud. I understand the business model.
    However, I'm wondering if any of you are in the same shoes as me and, if so, how you handle content management across iCloud compatible and incompatible devices.
    I have Lion on our 6month old iMac and Snow Leopard on my 6 year old Macbook.  This Macbook is still incredibly fast and reliable. I program websites across both devices using software like Coda 2, Transmit, etc etc...
    I'm a huge fan of the cloud and, while I can use dropbox on all my devices, I kinda like the inbuilt functionality of iCloud more.  (Plus I have more space there). Just wondering what workflows people are using to try and sync and work with content across compatible and incompatible devices.
    Cheers,
    Danno

    Danno. wrote:
    Hi all,
    I'm not going to bleat about SL not supporting iCloud. I understand the business model.
    However, I'm wondering if any of you are in the same shoes as me and, if so, how you handle content management across iCloud compatible and incompatible devices.
    I have Lion on our 6month old iMac and Snow Leopard on my 6 year old Macbook.  This Macbook is still incredibly fast and reliable. I program websites across both devices using software like Coda 2, Transmit, etc etc...
    I'm a huge fan of the cloud and, while I can use dropbox on all my devices, I kinda like the inbuilt functionality of iCloud more.  (Plus I have more space there). Just wondering what workflows people are using to try and sync and work with content across compatible and incompatible devices.
    Cheers,
    Danno
    There are some hacks to using iCloud with Snow Leopard. One of the keys is you must use iCloud as your primary source for Contacts and Calendars. That is, when you want to make additions or changes to either your calendar or contacts you really MUST do it from the web interface to iCloud. Otherwise you may wind up with duplicates.
    See the article here: http://bit.ly/LvVCR2

Maybe you are looking for