Canon 5D - BlackMagic Ultrastudio - PremierePro CS6

I'm trying to get an HDMI signal out from my Canon 5D MkII (I know that the signal will get overlays, I'll just use the signal as a live feed for some tests).
I've connected the Ultrastudio via thunderbolt, open capture in Premire Pro but all I get is a black signal. Is there something to set in particular to get the live signal or it isn't possible at all to make this setup work?
Thanks

In case anybody is interested, I figured out how to correct this. I uninstalled and re-installed the BlackMagic driver/software package. I was running 9.6.1 already, but Premiere Pro was installed AFTER the Blackmagic software, and apparently, for the BlackMagic drivers to get plugged in properly to the adobe Platform, you have to install the BM package AFTER Premiere Pro is alreayd installed. A bit annoying, but it makes sense. I lost some of my BM preferences in the process, but it took only a few minutes to get them back in place.

Similar Messages

Get 4 audio channels out through SDI whit BlackMagic UltraStudio Express

Hi,
We have some issues with the Blackmagic UltraStudio Express and Premiere Pro.
We need to get out 4 audio channels through SDI for different broadcast and news feeds. We can't do that with the UltraStudio Express on different Mac Book Pro (one on OS 10.9 and one on 10.8.5) with Premiere pro CC and Premiere pro CS6. (We have try with the driver 9.9.3 and 9.6.8). The only thing we manage to monitor out of the UltraStudio is 2 audio channels.
We know it "could" work as :
- We are able with the same setup to get 4 audio channels via FCP 7.0
- We are able with a Mac Pro OS10.8.5 + Blackmagic Decklink HD Extreme 2 (driver 9.6.8) to get 4 audio channels with Adobe Premiere CC
Do you have maybe a solution for this ?
Have a nice day !
Best regards
Yann-David Urbanowicz

You might ask in the Premiere Pro forum http://forums.adobe.com/community/premiere?view=discussions

Welche Projekteinstellung für PremierePro CS6 bei alten Clips mit Grösse 320x240 - wie importieren-schneiden-exportieren?

Hallo. Ich möchte eine DVD erstellen mit meinen alten Filmen und Fotos (Kamera Canon PowerShot S50). Welches ist die beste Projekteinstellung für PremierePro CS6 bei Clips mit der Grösse 320x240? Wie importiere ich am besten und mit welchen Einstellungen exportiere ich dann das Ganze wieder? Bin mit meinen jetzigen DVD's nicht zufrieden.Dankbar für jeden Tip.

Playback with Blackmagic Ultrastudio Express Thunderbolt

Hello,
I'm using a MacBook Pro, a Blackmagic Ultrastudio Express Thunderbolt, and Premiere Pro CC 2014. Under preferences I've set playback to BlackMagic playback. When I connect a monitor to the ultra studio express I can get playback from the sources but not from the program. I'm trying to output a green screen composite. I've got the composite completed in the program viewer within Premiere, I've rendered the effect, but it won't play out to the external monitor. But if I double click on either tracks on the timeline, they will play out to the external monitor.
Any assistance would be greatly appreciated.
Thanks,
Herb Forsberg

To my knowledge, if CC is up to date, it's up to date. I checked and there are no updates. Thanks.

Multistream with Blackmagic UltraStudio Express on MacBook Pro

Hey,
I've got a MacBook Pro Late 2013 (2,6 GHz i7, 16GB Ram) and wanted to output 3 streams captured by a Blackmagic UltraStudio Express.
But I'm afraid the streams doesn't get the full FPS and it stutters.
Does anyone have a suggestion how to improve the performance??
Kind regards

Hi, I run Final Cut Studio 2 and Logic Studio on my MacBook Pro 2.33 Ghz computer. Either of the new ones will be fine as they have an even better video card than mine does. My 2.33 had a 160 Gb drive inside and was just a little too small for both programs so I installed a 320 GB drive.
As far as playing music on it, iTunes is the way to go and all the songs are converted to either MP3 and AAC. If you plan to purchase music from the iTunes store than that is the way to go.
One item to consider, I wish I had had the option of the really high def screen when I purchased my MBP.
Good luck, I think you are really going to love the computer. Just be sure to protect it! I installed the Invisible Shield on my MBP, but there are other ways to protect it from damage. Best to get really good carrying case for it.
Oh, and you didn't mention - 15.4" or 17". For me the 17" is the only way to go, unless you plan to attach it to an external monitor when using FCE.

PremierePro CS6 crashes everytime I use it... everyday. Help!

I'm having an issue with PremierePro CS6 not responding. This causes me to force quit. It's become part of everyday routine. None of the other applications on my Mac OS X crash. I have checked the amount of memory dedicated to the application PremiereProC

Thanks a lot for your response Scott, I really appreciate it.
I have downloaded the 7.4 protools, but not installed because the 7.3 software cause instalations errors on the computer and the digi is not recognized.
Anyway I wanted to start familiarizing with Logic 8. I thought because Logic and Mac are from Apple they would be totally compatible...and of course they are not!
In other hands I spent 6,300 dollards in new equipment to avoid this kind of problems...but at the end you get all the same traubles whatever you buy or not (crack) the things...so.
Anyway, now my computer it seem to be damage... the fan never stop and I am geting some wierd icons over some folders (stop icons) so...
By the way, I bought everything in SweetWater if anyone wants to know, and so far they seems to be only available to put their hands to get the money but they are always too bussy to help and solve all this crap they did to me.
I bought logic studio, mac pro 8-core 3.0 and digi 003 to them...any of these are working!!! nice!!! and after one waste month they didn't give me any other solution besides to wait and wait and wait days and days in order to talk to any of the technicians...It seems their technicians only have time to ensembly equipment to sell it as soon as they can...nice!!!

I need to get raw plugin for Canon 5D Mark iii for CS6 the adobe website has changed and I can not find the download.. it keeps looping me back to the product download

I need to get raw plugin for Canon 5D Mark iii for CS6 the adobe website has changed and I can not find the download.. it keeps looping me back to the product download page without the raw

Which operating system are you using?
Have you tried Help>Updates from within photoshop cs6 to get either camera raw 8.3 or 8.7.1, which should enable photoshop cs6 to open the canon 5D Mark III files.
(version of camera raw depends on your operating system)
If that doesn't work try one of the following camera raw plugin installers:
Camera raw 8.7.1 plugin
https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
If you have windows xp or vista or mac os x snow leopard (10.6.8), then you'll have to use the camera raw 8.3 plugin installer:
https://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

Blackmagic UltraStudio 3D

Does Blackmagic UltraStudio 3D work as a capturing device with Final Cut Pro and Adobe Premiere?

Ask the developers - and remember to tell them (unlike here) what Mac and what version of OS X you are running).

13.1 Update Issue- Blackmagic Ultrastudio HDMI Monitor Out not centered

After the 13.1 update the HDMI monitor output on the Blackmagic Ultrastudio 4k is not centered on the screen. About 2 inches are cut off the right side. I have tweaked AE > Preferences > Video Preview - with Scale to fit being the only setting that shows a image.
This only occurs on the HDMI out. The SDI output is correct. (Although only with Scale to Fit selected)
It is only present in After Effects, Premiere monitor output works correctly.
Any advice? Thanks in advance!
Specs:
AE CC 2014.1 release -v 13.1.0.111
Apple MacPro 6,1 -- 3.7 GHz Quad-Core E5
AMD FirePro D300 2048 MB
OSx 10.9.5

Ok, thats the procedure I was talking about earlier. I did that bios default factory reset just now. First the version 6 and earlier. It didn't work so I tried version 7 and later and that didn't work. I then tried version 6 and earlier again only this time pushed F10 more rapidly and got right in right when I got to the F5 and enter portion. Then I pushed F10 again to save the change and enter again to close. The PC didn't boot up the next screen like the test said it would. So I did it all again and spent some time reading what was on the bios pages but accidently pushed ESC as the bios menu suggested instead of enter to close out . No boot up screen again. I did another hard shutdown and then unplugged the cord for 5 minutes and this time the PC stayed off when I plugged it back in. The bios are set to default but I cannot get it to start again in safe mode or boot up. So if the power supply is working properly, and the monitor worked in safe mode, then the video card must be good. right?
So I'm editing from the night before, its Monday morning here in Wi. and I'm sorry to say that after leaving the PC unplugged all night that when I plugged it back in this morning, the dumb thing started again without pushing the start button. So the only thing doing a recovery on the bios accomplished was to prove that my the video card can run the monitor in safe mode which is a good thing I guess. Hope someone has an idea as to what else I can try.-------thanks

TS4185 Blackmagic ultrastudio not working with facetime

Blackmagic ultrastudio not working with facetime, however the audio of the ultrastudio is recognised and can be selected in the source section what can i do to get facetime recognise it? also wirecast virtual camera is detected and recognised by facetime but doesnot work anyway to fix that?

Best option is to do a reset (restart) of the iPad to do this press and hold the On/Off button and the Home button, until the Apple logo appears. It will show you the "Slide to power off" just carry on holding the two buttons down until the logo appears and then release and that should have your FaceTime working again with your cameras.

Blackmagic ultrastudio 4K

Friends,
I'm using a 27" imac with a 32 GB memory.
The projects I do is basically feature films and ads.
I do my own colour correction too.
I'm planning to go for a projection set up.
Black magic mini monitor will serve the purpose.
But is there any advantage in going for blackmagic ultrastudio 4K other than its multiple outputs?
If we use ultra studio 4k will it speed up the performance like rendering, exporting...etc
most of the footages I work with is shot on red.
Thanks in advance
Sreekumar nair

Try 10.1 instead. Make sure you uninstall 10 first before installing this version. Also make sure the player under Playback in Adobe preferences is set to Adobe and not Blackmagic after the install. See if you have the listing for the Blackmagic output then under preview device.
http://www.blackmagicdesign.com/support/detail/register?sid=3958&pid=31783&fid=0&did=60580 &os=mac&alt=true&sdk=false
Eric
ADK

How do I get PremierePro CS6 to talk with Blackmagic card for HDMI output?

I recently upgraded my MacPro from CS5 to CS6. I primarily work with Premiere Pro but also with PhotoShop and Sound Booth. Previousely, my HDMI monitor worked with CS5 but the playback settings in CS6 only had the Adobe Default Player as an option and it would not show the Blackmagic card as an option. I upgraded my Blackmagic software to the most recent version (9.7) but that didn't work either. After the Blackmagic upgrade the HDMI signal in the CS5 PremierePro version (still installed and in use) ceased to operate. Subsequently, the MacOS was also upgraded from 10.7.5 to 10.8.3 but no change in outcome. I have checked all mechanical connections.
My platform specs are:
MacPro (Early 2009)
OS 10.8.3
Processor: 2x2.66 GHz Quad-core Intel Xeon
Memory: 12 BG, 1066 MHz DDR3
Dual screen Apple display
Blackmagic output settings (9.7) : All Video, 4 Analog Audio & 2AES/EBU (NTSC)
My question is how do I get PremierePro to talk with the Blackmagic card?
Phil

Hi Phil,
What Blackmagic card do you have?
There is a known bug with the Intensity cards and Blackmagic driver 9.7 where it does not output HD, only SD This should be resolved soon.
In the meantime, if you have a Intensity card you can go back to desktop version 9.6.8.
Best,
Peter Garaway
Adobe
Premiere Pro

Anyone using Blackmagic Ultrastudio SDI USB3 Interface in CS6?

I am looking at getting new SDI I/O cards for some new CS6 workstations we are building and am wondering how well these new USB3 devices work in CS6?
One of my main questions is can you monitor your CS6 timeline playpack from this device with HDMI and SDI output simultaneously?

digitlman wrote:
One of my main questions is can you monitor your CS6 timeline playpack from this device with HDMI and SDI output simultaneously?
The short answer is yes. In the BMD control panel there is a box which says " All Outputs Active".

Unable to capture via Blackmagic UltraStudio Express

Hi,
I'm having trouble capturing into Premiere Pro via UltraStudio Express.
I have a macbook pro 15” retina, Adobe Premiere Pro CC 2014, Desktop Video 10.1.4 (installed after PP), Ultrastudio Express, Ultrastudio Mini Monitor, Media Express, DaVinci Resolve 11 Lite.
I can capture from a camera via SDI into Media Express.
I can use LiveView and get monitor output with Resolve.
In Premiere Pro preferences, Device Control I can see 'Blackmagic Device Control'.
But I can't get any capture in Premiere Pro. Following the directions in Desktop Video Manual February 2014, as I setup a new project in Premiere Pro, I click on ‘Settings’ under ‘capture’, but get no feedback. If I proceed into a project, go to capture, I see no video from the connected camera.
Any advice would be wonderful. I’m trying to use this system for a green screen shoot on Monday.
Herb

To my knowledge, if CC is up to date, it's up to date. I checked and there are no updates. Thanks.

Can't open Canon Cr2 file in Photoshop CS6

I purscahed PShop CS6 Upgrade a few days ago as an upgrade for the full CS4 Extended (which was upgraded to CS5 last year). I installed CS6 as an upgrade to the installed and registered CS5.
Neither Bridge CS6 nor Photoshop CS6 will read Canon Cr2 raw files, and the "About Photoshop" splash screen indicates my purchased CS6 is a Beta version.
What has gone wrong? Should I uninstall CS5 and CS6, reinstall CS4 and then apply the CS6 upgrade to CS4?
Thanks
Ken Lilley

Hi Chris
Thanks for the reply. My reply is a bit delayed from time zones - I
live in Australia & had to go out to do some work.
My CS6 upgrade was bought from the Adobe Store Australia on May 10.
Order number is: AD003318323AU
The downloadsI got on May 10 seemed to cause the problem. I had trouble
with the Akamai option but used a second option to get CS6 in 2 files -
the small exe and the big zipped file. The small exe wouldn't unzip the
main file so I unzipped it manually and installed from that, and somehow
or other I finished up with the beta version. I'd never installed the
beta version before this, but the "About Photoshop" splash screen made
it obvious that I had it then.
When I got home a while ago I ran the Adobe download process again and
this time it worked, and file sizes and date last modified etc were
different in today's download. I deactivated the first CS6, uninstalled
it, ran Adobe Creative Suite Cleanser Tool and reinstalled from todays
downloaded files. My new CS6 is the correct & current version.
Adobe will probably have another confused customer somewhere who did
what I did at about the same time and got the beta version instead of
the real program.
The CR2 files I couldn't open were from a Canon G1X. My Canon 5D Mk2
files opened properly.
Thanks again
Ken Lilley
Brisbane Australia

Canon 5D - BlackMagic Ultrastudio - PremierePro CS6

Similar Messages

Maybe you are looking for