Canon 5d Mark II and Raw Images in CS4

HI
I have a Canon 5D Mark II and have just upgraded to standard CS4. When I go to view my Raw files on bridge I am unable to do this - all I see instaed of the thumbnail is the CR2 file. When I click on the file it states 'could not complete your request as it is not the correct type of document' - can you please advise how I can view these files?
Thanks

hu38 wrote: I have a Canon 5D Mark II and have just upgraded to standard CS4. When I go to view my Raw files on bridge I am unable to do this - all I see instaed of the thumbnail is the CR2 file. When I click on the file it states 'could not complete your request as it is not the correct type of document' - can you please advise how I can view these files?
The Canon 5D Mark II requires at least version 5.2 of the ACR plug-in. See http://kb2.adobe.com/cps/407/kb407111.html
The CS4 default installed ACR 5.0 so you have to upgrade the plug-in.
Get version 5.6 here: http://www.adobe.com/downloads/updates/

Similar Messages

Canon Eos 5D, Lightroom and RAW images

After a series of tests I carried out with my Canon camera, do you agree with these conclusions on the raw format?
Following an import in Lightroom of RAW pictures:
Loss of image styles (portrait, landscape, B&W...)
Loss of image style changes (+/- sharpness, +/- hue...)
The white balance setting is kept but can still be modified in lightroom
The temperature of color setting is kept
> Are B&W filters (green, yellow, sepia...) kept or deleted through import?
Thanks!

I believe we'll all agree that your comments are true. That is, Adobe ACR or Lr make no attempt to read much more into the raw data than the data itself (ie, without interpreting any setting other than the white balance).
While that is the case, Adobe has provided profiles that should very closely match the "portrait, landscape, ..." styles. Lr is also very versatile such that you can create presets that will closely match all the other in-camera styles ... and, btw, many more.
my CA$0.02 :)

Canon Mark II DS Raw Images

Since Aperture 1 and recently Aperture 2.1, I never had problems to import raw images to Aperture.
It work like a charm. I did the last 2 Aperture upgrades recommended by Apple. Now I am back from a trip, tried to import my raw images to the G5, and it would not work at all. On my old laptop, however, on which I did not run the upgrades, the raw import worked perfectly.
Where can I find the previous releases on which the raw import work well, and how could I un-install the current, go back to the ones that work, without corrupting all the images that I already have in Aperture.
Thanks in advance for any help.

hu38 wrote: I have a Canon 5D Mark II and have just upgraded to standard CS4. When I go to view my Raw files on bridge I am unable to do this - all I see instaed of the thumbnail is the CR2 file. When I click on the file it states 'could not complete your request as it is not the correct type of document' - can you please advise how I can view these files?
The Canon 5D Mark II requires at least version 5.2 of the ACR plug-in. See http://kb2.adobe.com/cps/407/kb407111.html
The CS4 default installed ACR 5.0 so you have to upgrade the plug-in.
Get version 5.6 here: http://www.adobe.com/downloads/updates/

I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
EOS 5D Mark II
CR2
5.2
2.2
EOS 5D Mark III
CR2
6.7, 7.1
4.1
Photoshop CS6
7.0
8.3
Photoshop CS5
6.0
6.7
Photoshop CS4
5.0
5.7
The 5D Mark II was first supported by Camera Raw 5.2 which is compatible with CS4+.
The 5D Mark III was first supported by Camera Raw 6.7 and 7.1 which is only compatible with CS5 and CS6.
So the CS4 will never be able to open Raw 5D Mark III files.
Why doesn’t my version of Photoshop or Lightroom support my camera?
Choices:
Purchase CS6 full version (CS4 is too old to qualify for an upgrade)
Join the Cloud
Free option: download the free Adobe DNG converter, convert all 5D Mark III Raw files to DNG format then edit the DNGs in CS4
Photoshop Help | Digital Negative (DNG)

I just bought the canon 5d mark iii and my photoshop elements 10 wont read my raw files. I want to buy photoshop elements 13...is this compatible with my new camera?

I just bought the canon 5d mark iii and my photoshop elements 10 won't read my raw files. I want to buy photoshop elements 13 but want to make sure my camera is compatible with it first. Thank you for your help!

Photoshop elements 10 should be able to open those files if you update to camera raw 6.7
Which operating system are you using?
windows
Adobe - Photoshop Elements : For Windows : Camera Raw 6.7 update for Elements 10
mac
Adobe - Photoshop Elements : For Macintosh : Camera Raw 6.7 update for Elements 10
Also, photoshop elements 13 will open those files as well.

Just got me a new camer canon 5D mark iii and now I can't send the images from lightroom to open in photoshop anymore

Hi Mark, I have lightroom and Photoshop CS6 and worked with it with my old camera, Canon 60D and had no problem
now I got me a new one, Canon 5D Mark iii and I can import the images into lightroom but I can't not send it from lightroom to photoshop. Also tried to drag and drop the picture image directly into photoshop but it wouldn't allow me to do so.
What do I have to do to get that working?

In Bridge, go to Edit->Preferences->File Type Associations

Is anybody using the Canon 1D mark III with RAW and Aperture?

Hello,
Is anybody using the Canon 1D mark III with RAW and Aperture?
JO

I'm using a 5D with a G5 and having nothing but problems. I have aperture installed on my Powerbook and don't have any problems. Upload fine and everything. But as soon as i try and upload photos on my G5 it's terrible. They preview fine before import.
but afterwards they're corrupt.
any help....
Message was edited by: Kris Shacochis

Bought a new camera and Photoshop advises me that it can not read my type of file.. Its canon 7d mark 2 and the extension is CR2.

Bought a new camera and Photoshop advises me that it can not read my type of file.. Its canon 7d mark 2 and the extension is CR2.

Hi EddieGerdak,
The update is available now.
Release details:
Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html
Camera Raw 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a vailable.html
Regards,
Pete

Canon 7d Mark II camera raw - when will it ship?

Hey
Just bought Canon 7d Mark II and saw that it cannot be open in Camera Raw yet. When do you think it will be ready to be shipped?

No release date has been given, but it will be the next release of ACR or Lightroom.
Gene

Canon 5d Mark III and Lightroom 4.3 tethered shooting issues.

I bought a new Canon 5d Mark III and upgraded my lightroom to 4.3. I have been having issues shooting tehtered. I'll shoot and get some frames coming in and when I start plugging away the program bar will spin and I'll only get a few grey frames and it just kind of freezes. I don't know what to do.

LR4.3 was supposed to improve Lightroom's built-in tethering, but in my experience it still has some reliability problems - especialy in recovering from broken connections (not just unplugging USB but also if the camera loses power by sleeping or when changing a memory card).
Sorry if some of this is basic info, but I'd recommend you try a different USB cable - the cable end that connects to the camera is easilly damaged in a way that makes a connection possible, but unstable (I strongly recommend finding a cable with a 90 degree downward bend at the camera plug). Also, we often have to send a camera body in to have the USB port serviced. Canon has begun to provide a small rubber boot to reinforce the USB connection at the port, but they won't sell the part outside of a repair service. Be sure to use some kind of stress-relief for the cable at the camera. Tethertools sells one, but I've made mine DIY with a little string and a small binder clip... nearly free. Finally, be sure your cable is less than about 15 feet. If you need to go longer, I've successfully tethered with two cheap powered repeaters from Monoprice, but no single link should be over 15 feet.
Oh yeah, also set your camera to not sleep for a long time.
Beyond all that, is using EOS Utility for capture and LR Auto-import a viable option for you? It works very well for me. I use the Apple "Image Capture" app to tell my system to launch EOS Utility whenever the camera is connected - and set EOS Utility to launch into remote capture/camera control mode. It's very stable and recovers from disconnects or camera power loss and the remote camera control/live view can be pretty handy.
Another plus is that if you do need to disconnect USB and shoot to card, you can just copy new images from the card to your watched folder and they are imported to Lightroom with the same settings and location.
The only downsides for me is that there is no way to have a crop apply to new images using auto import -- and I have to re-save my develop preset each time I make a change. Using the "Same as Previous" option under develop settings in native tethering is so great for this and I'd love to see a similar option added to auto import.
Hope this helps.
-Andy

Dark pictures with canon 5d mark 3 and 600ex flash, night indoors in Auto Mode and flash on.

I have purchased a new canon 5d mark 3 and speedlight 600ex-rt flash. While testing it indoor at night , the room lights are on and I was using the Auto Mode with Flash on. The pictures are Dark with the Flash on and when the flash is turned off the pictures are brighter. I am confused. How to get the AUto mode working with the Flash on.

Automatic mode, it it's attempt to be reasonably foolproof, is going to lock you out of having any control over the exposure.
The E-TTL metering system on your camera & flash are attempting to find the correct exposure for your subject.
Due to laws of physics (the inverse-square law), light has "fall off". It's not actually possible to use a single light source and expose a large room with that single light. Either the subject is nicely lit but everything else will probably be too dark. OR... the background is nicely lit but the subject is heavily over-exposed. (BTW, there are two ways to get around this.)
The amount of fall-off is based on the relative distance from the light. Every time the distance increases by a factor of 1.4 the amount of light is cut in half. This means if you have subject 10' away, but you have a foreground object only 7' away and a background object 14' away, and the flash is exposed for the subject at 10', then the foreground object will be over-exposed (with twice as much light as needed) and the background will be under-exposed (with half as much libght as needed.) Incidentally... if you "double" or "halve" the distance then the light difference will be 4x or 1/4 (depending on if you are getting closer or farther.)
Here's a video which both explains and then later demonstrates the concept in a way that makes it very obvious to see and easy to understand. If it seems confusing at first... stick with it. The video is only 12 minutes long.
In fully automatic mode the camera wont let you control anything (except how far away you stand from your subject).
If you switch to "Program" mode, it essentially works like automatic mode EXCEPT it will actually allow you to override settings or set compensations.
When you use a flash in a room with some ambient lighting (but otherwise dimly lit) there's a technique called 'dragging the shutter' (which the camera can actually do for you somewhat automatically).
To do that, set the camera to Tv mode (Tv = Time value... which is shutter priority mode). Dial in a slow-ish shutter speed... say around 1/60th of a second. Use a moderately boosted ISO (400 would probably work well... you might even go up higher).
The camera is going to evaluate the exposure needed for the room as though you don't have a flash... and it'll set the camera settings accordingly. However... since it knows you have a flash, it'll still perform the E-TTL II exposure metering and will use the flash anyway. What you end up with is a shot that has a nicely exposed primary subject (because the camera used flash) AND... a nicely exposed background which was primarily illuminated with ambient light -- but looks pretty good because the camera used an exposure that was adequate for the ambient light.
The reason I suggest using Tv mode and NOT Av mode is because you can control the mixture of flash vs. ambient light by controlling the TIME that the shutter is open. But this does NOT work if you control either the aperture or ISO.
Here's why: The flash is "momentary" but the ambient is constant. If you were to adjust the aperture settings, that will increase or decrease ALL the light sources that contribute to the exposure... so it increases (or decreases) the amount of flash AND the amount of ambient light ... and it does them in the same proportions. If you want to bright up the background lighting WITHOUT over-exposing your foreground subject, then you don't want to increase both... you only want to increase the amount of ambient light.
Since the flash is a momentary burst of light, if you leave shutter open longer you wont actually collect any more light from the flash (because the flash was providing illumination for only a tiny fraction of a second. Extending the amount of time that the shutter remains open means the camera will _only_ collect more of the ambient light... and that helps bring up the dark backgrounds.
One way to get around the flash fall-off problem is to greatly increase the distance between flash and subject. You still get "fall off" but now the distance you have to change to notice the fall off really increases. But this method usually isn't very practical because you'll be standing much farther then you'd prefer to be to get the shot.
The second way (and much more practical) is to "drag the shutter" (deliberately use longer shutter times so that the camera can collect more ambient light long after the flash is done.).
Tim Campbell
5D II, 5D III, 60Da

Canon 5D Mark II and Canon 50mm 1.4 for sale

Hey guys I'm selling my Canon 5D Mark II and Canon 50mm 1.4. I'm looking to sell them as a package for $1200 or BO. I am willing to negotiate at a reasonable price. I live in New Hampshire. Thanks!

Unfortunately, the 5D Mark II isn't yet have support for tethered shooting as does the 5D Mark I. There is an Automator action you can set up with a "Hot Folder" using the EOS capture utility that is a decent work around. Been using this technique for several months now. I'm sure an update or next version will include tethered support.

Canon 5d Mark ii and Camera Raw in CS3.

Bought a new camera, Canon 5d Mark ii. Cannot open the RAW files. Can open them from my older Canon camera. Not sure which Camera Raw comes with CS3. Not sure if I have to upgrade. If I do need to upgrade to at least CS4 that may be doable. Otherwise OR until I do, am I better off just using the Canon software for now? Advice please!!!

That camera was supported for the first time in ACR 5.2, which ran with Photoshop CS4.
If you are not planning on upgrading your Photoshop to CS4 or CS5 right away, you need to download the free, stand-alone Adobe DNG Converter version 5.7 to convert your raw Canon files to DNG raw files first. Then you will be able to open those DNGs in Camera Raw in CS3.
You should update your ACR in CS3 to version 4.6 ASAP, though. ACR 4.0 is woefully obsolete and nobody should be running that old version.
Be aware, however, that you will be leaving a lot of image quality behind by staying with that old version of ACR in CS3. Camera Raw 5.7 (the current and last version for CS4) is light years ahead of ACR 4.x. ACR 6.1 (currently a Release Candidate) which requires CS5 is even a bit better than ACR 5.7.
ACR 4.x is really old technology. If you can afford that camera, you most certainly can afford to upgrade to CS5.
Wo Tai Lao Le
我太老了

Mac Lion 10.7.3, LR 4.1, CS6, Canon 5D Mark III and all the plug ins upgraded! Need the RAW update!

My workflow has tripple because nothing wants to run smoothly! I am so bent because Adobe, Canon, Apple and every other plug-in software provider can't seam to get on the samer fricken page and I've spent BIG $ over the last 2 months trying to make everything run better... Where is the latest RAW?
I Purchased the Upgraded Adobe LR 4.1, CS6 Beta & got the Canon 5D Mark III, Mac Pro server update to Lion, WHEN is next dot release Camera Raw? My workflow has trippled in time because of this issue. I'm so frustrated with having to convert images in a slowed up piece of crap canon software package and then wait another decade for the newest LR to load the images I could crap fire! Come on Adobe, where's the release? After a few grand you'd think we'd get a better response time. As for Canon, they are not consistant with community software sharing and can kiss my *!! because to leave Adobe hanging sux!
There should be new laws that penalize jerks that screw with workflow!
Time is money, let's go Adobe!

Let's see:
5 Minutes of research would have told you about 5DMKIII support availabitliy but that is too much time to spend additionally researching a 15K purchase.
You paid 79.00 for the LR Upgrade and 14,000 plus for the rest of the package.
You bought a camera that was released after the 79.00 software.
You are using a Public Beta for the other software (no cost to you)
A Camera Raw release candidate with support is availabe. I(again no cost to you
Yet you say:
"Come on Adobe, where's the release? After a few grand you'd think we'd get a better response time. "
So far, you've paid 79.00
Finally: this is a user-to-user forum-not a direct conduit to Adobe.

OSX 10.10 and Canon 7D Mark II and Camera Raw

Anyone having any luck opening camera raw files using Lightroom 5 or Photoshop CS6 from Canon's 7D Mark II camera? Digital Photo Professional software also not available. I tried downloading the Maverick version but it didn't work.
Any suggestions?
Any news about when camera raw update will release for this camera?

Jim, I understand that when people jump on new technology there are hiccups in the process. My reason for asking questions on this "community" forum was to hopefully find someone that might have some information about how to make RAW images work with this new Canon camera and new OS from Apple, etc. Others are publishing raw images and know how to access the updated software or have work arounds. That's all I'm looking for!
You, on ther other hand, seem annoyed by my questions and have no problem putting me in my place on this "help" forum. It would be nice if I knew as much as you but then that's why dummies like me ask questions from experts like you. Be patient and just ignore dumb questions! Please pocket your sacarsm. I'm old and I'm stupid. I'm just loking for some advise.
Quote Jim Hess: "In September 2014 I was given a small reward from Adobe for my contributions to the Adobe community forums." Congratulations!

Canon 5d Mark II and Raw Images in CS4

Similar Messages

Maybe you are looking for