Canon 5D Mark II cannot import RAW .CR2 Files

For some reason I can no longer import my .CR2 files from my Canon 5D MarkII.  This is a new problem as I have had Aperture for some time now.  Is there a way to go back to an earlier RAW processor?  This latest one from May may be causing the issue...  Any guidance?

DavidMarlow wrote:
Sorry, in Aperture it just comes up with a list of files that it could not import. 
No error message or any information at all?
When I try to get them into iPhoto it says that they are an unsupported file.
I thought they were in iPhoto already.
I am trying to get the files from my laptop on iphoto to my imac on Aperture.  I am doing this via the network.  On once side I tried a direct iphoto import (did not work) and then tried to do it pointing at the actual CR2 files and that did not work.
You should just copy the iPhoto library over to the iMac and then run Aperture and import the iPhoto library. Doing this over the network is just making your life harder. Or else install Aperture on the laptop do the import there and copy the Aperture library over.

Similar Messages

  • How do I import raw CR2 files from camera into LR5? I get an error message

    I'm trying to import raw CR2 files from my camera into LR5. I get a message "Files appear to be unsupported or damaged." I know they are not damaged. Does LR5 support raw files? I can do this in Bridge and it converts them to dng files. This would be ideal for me if both could be done in LR5.

    Not sure what the problem is if you say the files re recognized in Bridge? You could test the CR2 files by downloading the free Adobe DNG converter - latest version 8.6 (keep your CR2 originals as backups and for use in the camera manufactures software)and then import the DNG’s. It’s an extra step but I use it all the time to batch process into final folders.
    Windows download (.exe file) click here DNG Converter 8.6
    Mac download (.dmg file) click here DNG Converter 8.6
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • New to Lightroom, problem importing raw CR2 files.

    I am new to Lightroom and am having trouble importing my CR2 raw photo files. In the "import" section I select my SD card that contains the raw image files. All .jpeg files on the card show up as thumbnails but the CR2 files show "preview not available for this file." I select one of the CR2 thumbnails anyway, select a destination folder on my external hard drive and click "import." A window pops up that says, "this file is not recognized by the raw support format in Lightroom." I'm using Lightroom 4.4 and am working with a Windows Vista operating system (on an old, junky laptop). My camera is a Canon 70D and am shooting in RAW+JPEG. I also downloaded the Adobe .DNG converter 6.3 to try to convert the files before importing them into Lightroom and it is also not recognizing and importing my CR2 files. Not sure what to do at this point. Any suggestions?

    I would recommend downloading DNG Converter 8.2 which is compatible with Vista.
    The latest version 8.6 requires W7 or W8
    Use this download link:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5646

  • Canon 7D Mark II cannot open raw files in cloud software

    Hello, I just upgraded my camera from a Canon 7D to a Canon 7D mark II but now I can not longer open raw files.  I am using the creative cloud package.  Does anyone know what I should do.  I thought since it is the cloud version, it is always the most current version.
    Thanks,
    Brian

    Try downloading the latest Camera Raw update from here: Camera Raw plug-in installer
    Benjamin

  • IPhoto 6.06 Will Not Import RAW CR2 files Taken Through an Uncoupled Lens

    If I use adapters to couple my Canon 20D to a telescope (which is an electronically uncoupled lens and has no lens-related exif data), iPhoto freezes and will not import a RAW Canon CR2 file taken through any telescope. It imports such jpegs just fine, and Preview can open either. iPhoto, however, must be forced to quit under the Apple menu.
    It doesn't matter where the RAW file is...in the camera, on the desktop, in a card reader, or on a CD.
    This is an obvious bug in iPhoto.
    Regards,
    Don
    MacBook Pro   Mac OS X (10.4.9)   2G Core Duo; 1 G RAM

    Do you have access to an Apple store, or a friend
    with Aperture? It would be interesting to see if
    Aperture has the same problem.
    Not that it really matters, but a bug in both
    iPhoto and Aperture is more likely to be fixed!
    I don't know anybody who uses Aperture, and my nearest Apple Store is 120 miles away in Cincinnati.
    I'm able to work around the problem since Canon's Digital Photo Professional, working with Canon's EOS Utilty, imports and processes these images just fine, as does Photoshop CS.
    However, I miss the premise that iPhoto should be the central organizer and storage vessel for all of one's digital photos, making naming, finding, and backing them up a snap, even though a different program may be used for processsing them.
    As an aside, Canon's download site warns that EOS Utility 1.1.1 will not work on Intel Macs; it does...with full functionality.
    Thanks for your response.
    Don

  • Lightroom 1.2 not importing RAW (CR2) files from 40D

    Just upgraded to LR 1.2 and thought it would solve my problems but find that it doesnt appear to import CR2 files, either directly from a card reader or from a file already saved to the computer. It says files use an unsupported color mode. These were shot in RAW (not sRAW) + JPG and others were just RAW.
    Do I need to change any setting in Lightroom to make it work with the new RAW settings?
    Any suggestions would be appreciated.

    Ooops... Me bad. It works fine. For some reason 1.2 didnt install the first time I ran the installer. After finding that it was still 1.1, I ran the installer again and it took. Now its importing 40D files just fine.
    Sorry for the false alarm.
    Steve

  • HELP! Cannot open Canon RAW (CR2) file in PP5.5.2 (Mac)

    Hi folks.
    I cannot import RAW (CR2) files (Canon 5D2) files into premiere pro 5.5.2!
    I can get them into After Effects (through cameraraw) but PP does not even show them as a "supported file type"
    If I drag and drop from the finder I get "unsupported file type" error
    My understanding is that CR2 files are supported in CS5.5
    Any ideas
    MacBook Pro OS X 10.7.2 (Lion)
    For the rest, everything seems to be "normal"
    Thanks in Advance
    Tom

    To use Camera RAW, you will need to process the files through a Camera RAW converter. With the proper ACR module, PS, and Lightroom will handle that processing, as will the Canon utility. With Adobe ACR, make sure to update to a version that handles YOUR camera's RAW files - mfgrs. tweak those model to model, so keeping the ACR module current will insure that you can handle the particular Camera RAW files properly.
    I agree with Stephen's rec. to NOT use JPEG, if ultimate quality is of a concern. In PS, I just process my Nikon, Panny or Canon Camera RAW files to PSD. I would assume that the Canon utility would have the option for TIFF, as my older one does - there is no option for PSD in it. Do not know about the newer Canon Camer RAW processing, but TIFF should be just fine.
    Good luck,
    Hunt

  • Why has LR4 suddenly started to refuse to download RAW CR2 files?

    Today I went to LR4 and tried to import RAW CR2 files into the program using the usual import process which is pretty automatic. I also asked that copies be saved as DNG files. No matter what I tried, I got an error message saying that the files could not be imported. I use a Canon 5D Mark III. The only difference in today's shoot was that I used and HDSC card instead of a CF card. No other obvious changes. Clearly, this is a serious concern. What amI missing?

    Hi,
    I too have been having trouble importing CR2s consistently using Lightroom 4.3. I use a Canon 5D Mark III with Macbook OS X 10.7.
    Spoke with Canon this morning and apparently they are getting a few calls about this problem. For me, it is not a permissions issue.
    I swapped cards, cords, reinstalled Lightroom and updated everything. I bought a card reader and that is the only thing that works.
    Seems to be some kind of communication problem between Lightroom (4.3) and my Canon 5D M3.

  • Hi cannot import RAW photos from my canon eos 5d mark 3 to iphoto 9.6 with iOS  X Yosemite. Fotos are black. Did you have a solution for that?

    hi cannot import RAW photos from my canon eos 5d mark 3 to iphoto 9.6 with iOS  X Yosemite. Fotos are black. Did you have a solution for that?

    Thanks. Once ImageCapture had accessed the photos, THEN iPhoto began to pick up the data, so I was ultimately able to do both. It only worked with the cable, though, not the card readers. Weird.
    And I really appreciate the ImageCapture tip. Any idea why it worked?

  • Import screen cannot enlarge preview thumbnail from Canon G15 raw CR2 file

    Lightroom 4.3 import screen does not seem to be able to enlarge for better viewing  the preview thumbnail from a Canon G15 raw CR2 file?

    HI,
    I do not know the answer, but I would expect, that Lr only displays the embeded jpeg preview of your raw files. And I think, that the previews are small. You can use exiftool , exiftoolgui to see what's the dimension of your previews.

  • Hi. I have Lightroom 4 installed. I cannot download my CR2 files from the Canon 5D Mark III camera. I have downloaded Lightroom 5 thinking it was an update but it appears I have to pay for the program. Any ideas how I can get lightroom 4 to accept my CR2

    I have Lightroom 4 installed. I cannot download my CR2 files from the Canon 5D Mark III camera. I have downloaded Lightroom 5 thinking it was an update but it appears I have to pay for the program. Any ideas how I can get lightroom 4 to accept my CR2 files ?

    The Canon 5D Mk 111 was supported from LR 4.1, see the link below. Just update LR to the latest version. See link below
    Camera Raw plug-in | Supported cameras
    Adobe - Lightroom : For Windows
    Adobe - Lightroom : For Macintosh

  • How do I import RAW photos into iPhoto?  I cannot import RAW photos from my Olympus EPL-2 camera.  I am using iPhoto 7.1.5.

    I cannot import RAW photos from my Olympus EPL-2 camera.  I am using iPhoto 7.1.5.  I read that iPhoto has to update their system and add each camera to be able to import RAW photos from it.  If this is true, how can I let Apple know to add my camera.  Thanks in advance.

    The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
    Therefore the Raw for every camera model needs to be added individually. If yours is not supported then let them know you want it:
    iPhoto menu -> Provide iPhoto Feedback
    When support is added I also expect that you'll need iPhoto 09 or 11.
    Regards
    TD

  • IPhoto '09 not importing Camera Raw (.CR2) files

    Recently purchased a new Mac Pro and tried to import my Camera Raw files from a supported camera. iPhoto refuses to import (unrecognized file format) files. Does anyone know the solution? I have over 1,700 camera raw (.CR2) files I need to import.

    Larry,
    Cameras were Canon 20D and 50D. Until yesterday both were using the sRAW color space - switched them to Adobe RAW today. Problem was the 1,700 pictures with sRAW colorspace taken over the past few years - no issue importing into Adobe Photoshop CS4 (not surprising at it uses its own libraries), problem was only with iPhoto. I had what iPhoto reported as the latest update to Camera Raw, however when I browsed the Apple support pages I found v3.0 which I installed. That fixed the problem as it now has sRAW support for Canon cameras.
    Only issue that remains is importing of DNG formatted pictures. iPhoto will not import those, which is hard to understand as it is becoming the defacto cross platform format for RAW files.
    I don't recall having this issue on my older MacBook using an older version of iPhoto and older libraries...
    Anyway, good news is that v3.0 fixed the problem.
    Thanks.

  • Importing RAW  (CR2) images to iPhoto (7.1.1)

    I'm having problems importing RAW (CR2) images to iPhoto (7.1.1) from my Canon Powershot G9. It imports the JPEGs with no problem, but says the following for RAW (CR2): "The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data".

    Yellowfish
    That would be because the G9 RAWs are not supported at this time.
    Regards
    TD

  • Adobe photoshop elements 11 won't read my canon T5 raw CR2 files.

    adobe photoshop elements 11 won't read my canon T5 raw CR2 files.
    why?
    need help!
    Solved!
    Go to Solution.

    Hi Zach.
    Sorry to say but Elements 12 came out several months before your camera. Adobe stops updating camera raw files for old software editions so that people have to buy new versions of the software when they get a new camera. It happened to me with LR3 when I got a new camera.
    There are works rounds but they are a lot of extra steps and I think you would be converting the files to Some format other than RAW (tiff?) and which I am not sure will perform the same.
    I think you just need to get a newer version of Elements.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

Maybe you are looking for