Canon 5D Mark III - underexposes

Question

Hello,
I've noticed that my Canon 5D Mark III underexposes somewhere between 2/3 stops and one stop.
I've taken a test photo and I've attached the histogram and the exif. I photographed a white sheet of paper
Is this behaviour normal or is there a problem in the camera's metering system?
Thanks,
Catalin
Histogram
Test photo
I have also attached the full exif:
[Image]
Make = Canon
Model = Canon EOS 5D Mark III
Orientation = top/left
X Resolution = 72
Y Resolution = 72
Resolution Unit = inch
Date Time = 2014-01-20 21:16:29
Artist = Catalin Fuioaga
YCbCr Positioning = co-sited
Copyright = Catalin Fuioaga
Exif IFD Pointer = Offset: 360
GPS Info IFD Pointer = Offset: 9554
[Camera]
Exposure Time = 1/200"
F Number = F5.6
Exposure Program = Normal program
ISO Speed Ratings = 2000
8830 = 2
8832 = 2000
Exif Version = 30, 32, 33, 30
Date Time Original = 2014-01-20 21:16:29
Date Time Digitized = 2014-01-20 21:16:29
Components Configuration = YCbcr
Shutter Speed Value = 7.63 TV
Aperture Value = 5 AV
Exposure Bias Value = ±0EV
Metering Mode = Partial
Flash = Flash did not fire, compulsory flash mode
Focal Length = 105mm
Maker Note = 8152 Byte
User Comment =
Subsec Time =
Subsec Time Original =
Subsec Time Digitized =
Flashpix Version = Version 1.0
Color Space = sRGB
Exif Image Width = 2880
Exif Image Height = 1920
Interoperability IFD Pointer = Offset: 9326
Focal Plane X Resolution = 1971.253
Focal Plane Y Resolution = 1975.309
Focal Plane Resolution Unit = inch
Custom Rendered = Normal process
Exposure Mode = Auto exposure
White Balance = Manual white balance
Scene Capture Type = Normal
A430 =
A431 = 073024017512
A432 = 24/1, 105/1, 0/1, 0/1
A434 = EF24-105mm f/4L IS USM
A435 = 00001bcf3a
[GPS]
GPS Version ID = 2, 3, 0, 0
[Interoperability]
Interoperability Index = ExifR98
Interoperability Version = Version 1.0
[Thumbnail Info]
Compression = JPEG Compressed (Thumbnail)
X Resolution = 72
Y Resolution = 72
Resolution Unit = inch
JPEG Interchange Format = Offset: 11444
JPEG Interchange Format Length = Length: 3320
[Thumbnail]
Thumbnail = 160 x 120

Answer 1

"....Exposure Bias Value = ±0EV
Metering Mode = Partial
Flash = Flash did not fire, compulsory flash mode
Focal Length = 105mm..."
You are in partial metering mode, which is fine if you are shooting a plain white piece of paper. However most of the time I'd recommend either Evaluative instead, or if you are more accustomed to it, Center Weighted. Or use Spot Metering in some cases. Partial is sort of like a "Large Spot Metering" mode.
Evaluative has the advantage of putting extra emphasis on the area right around the active AF point, i.e. presumably around your subject. The rest of the image area is considered, too, but more weight is given to the active AF point. Center Weighted metering doesn't do this (it's sort of an "old fashioned" method of metering, but some people are accustomed to it from using older cameras.)
Do a Google search on Expose To The Right (ETTR), which is a common technique used by Canon shooters. Like hsbn mentioned above, I think Canon is a bit conservative about their metering, erring a little toward underexposure to "protect the highlights". This was a good practice back in the days of slide film, but is just the opposite of what you want to do with digital. To minimize noise in images, it's better to slightly overexpose and pull the exposure back down a little in post processing. Not a lot... just +1/3 to +2/3 stop. Here is a link to one of the better descriptions of ETTR I've seen. There are other tutorials and discussions about it other places online, so do a search if you wish.  
Oh, and there was an exposure issue with the 5D III early on. The problem was a light leak near the top LCD, that would cause underexposure from additional light reaching the metering array in the viewfinder. Canon did a recall made some changes to fix the problem. Yours would have to be a very early production camera that was never fixed under the recall, to have this problem.  The problem would vary, depending upon how strong light was striking the top of the camera whle shooting. Outside on a bright sunny day would cause more error than shooting indoors in low light.
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM