Canon 5dm3 thumbnails perfect browser image dark

i've got aperture 3.3.2, i've used aperture for 4 years. old camera was canon 5d, but got the canon 5dm3-shooting raw. Images look fine on the camera & as a thumbnail in aperture, once i click on the thumbnail & image goes to the browser screen, it takes about 2-5 seconds to load fully & the image turns very very dark. i tried it on my desk pro & laptop, both the same, old 5d images still perfect (actually lighten slightly as they load but always have). new canon g1x photos load perfectly also in raw. i can "correct " the images
but takes major correction. Leave for europe in 3 weeks, just want to be sure new 5dm3 is infact exposing correctly. Thanks!

Highlight tone priority is the one.  Disable that.  My cameras are olders so I don't have that setting but I know that Aperture doesn't currently read this (proprietary) metadata that Canon uses.
Highlight alerts I think is the blinkies you see on the LCD for photos where there are blown-out or specular highlights.  It doesn't affect the exposure of the photos itself.

Similar Messages

  • Loss of thumbnails of RAW images in Photoshop prior to opening them in Camera Raw

    I recently purchased and started using a Canon EOS 7D Mark II.  I found that with my Photoshop CS6 I was unable to open my RAW files in Camera Raw, so I downloaded an update of Camera Raw, viz. version 8.7.1 from the Adobe website.  Now I can open the RAW images from my new camera in Camera Raw.  However, I have lost the capacity to display a thumbnail image of a RAW file when using the open function of the file drop down menu in Photoshop. Now when I single-click on an ID number of a RAW image from the list of images, I see only a blank thumbnail.  I save lots of time using image thumbnails for selecting images for editing in Camera Raw.  Is there some way to restore the ability to see RAW image thumbnails in Photoshop prior to opening images in Camera Raw?

    Which operating system are you using?
    Are the blank thumbnails only for the files from the canon EOS 7D Mark II camera?
    An alternative is to use Bridge CS6 or Mini Bridge to see the photos before you open them in photoshop cs6.

  • Thumbnail in browser doesnot match the pic in the view for many of my photo

    I have noticed today after having loaded my library and several project with photo's 2500 or so that several thumbnails when high lighted actual bring up a differnet image. ( i.e. the thumbnail image does not match the image in the work screen area.) what is happening? i take it is a file name problem but i cannot get the correct thumbnail to match work area and the thumbnail in browser will not appear in work area to work on.

    I have had the same problem with A 1.5.3 and OS X 10.4.9 - the problem started when I moved some pictures from one project to another, then it suddenly switched thumbs on a series of pictures. They simply showed each others thumbs while the image was the opposite. I "fixed" it by making adjustments to each image and then undo. Then the thumbs were updated correctly. This has to be a bug in Aperture.

  • Browse Images Like the windows way

    How can i use preview to respond to Tab and arrow clicks to browse images in a folder. Also, is there a way to view thumbnails of images in mac? All i see is preview icon for all my images.
    Macbook 2.0ghz   Mac OS X (10.4.7)  

    Check out VitaminSee:
    http://www.elliotglaysher.org/vitaminsee
    This may be exactly what you want, and it is faster than Preview, and it is FREE. You navigate to a folder, then move down the images using the down arrow key and a large version of each image appears in the viewing pane. It will also add custom thumbs to the images if you wish.
    Francine
    Francine
    Schwieder

  • Canon 5D3 thumbnails

    Without upgrading from 10.6.8, is there any way to display thumbnails of RAW images from a Canon 5D3?
    Why should I have to upgrade to a newer OS, simply to display thumbnails from a newer model camera?
    jpegs display as thumbnails, but not RAW files.  I have never had to upgrade my OS in the past when a new camera came out.
    Yes, I have the latest Camera Raw installed.
    No, I do not use Aperture or Lightroom.

    imagemaster wrote:
    Why should I have to upgrade to a newer OS, simply to display thumbnails from a newer model camera?
    Canon's system requirement?  Have you discussed with them? 

  • Canon Pixma Pro-100 prints very dark

    I see that this is a recuring problem with the Canon Pixma Pro-100, but as nothing I have found online helps I'm asking and are hoping that someone can solve this problem for me.
    Just picked up a Pixma Pro-100 today, and installed it on my 2011 iMac 27" (Yosemite) with downloaded drivers from Canon's website to be sure i have the latest ones. I also checked the printers firmware but that's the latest at 1.100. Wether I'm printing via Lightroom or Photoshop; or via Canon Print Studio Pro, My Image Garden, or via LR / PS directly; with- or without PS as color manager; the prints turns out to be much to dark.
    I have to set an exposure of +2/3 in LR to be anywhere close to getting the same result as on the screen. I'm also careful to select the right ICC profiles for the correct paper. My monitor is calibrated with an Spyder4pro and I also re-calibrated it during this process to see if that helped.
    Well. Long story short; the prints are to dark. So i borrowed my wife's 2013 MacBook Pro (Yosemite) Spyder4pro, and installed the latest drivers from Canon. Again; on this machine the prints are also to dark with about +2/3 to correct for the printer to do something that looks like the monitor. Both monitors are also set to about 30% brightness.
    I also have access to an Epson Stylus Photo R3000 and the prints from this comes out much brighter.
    Sadly I see that many others also have the same problem. So; here's the question. How do I fix this? Do i have to return the printer again and get a refund? Because this is clearly not good enough.
    Solved!
    Go to Solution.

    Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
    My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
    When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
    Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
    It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
    On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
    Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
    One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
    I also checked out this B&W test image:
    http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
    You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
    You can print a series of test images:
    find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
    You can do a similar thing in Lightroom using the printer driver and User Templates.
    There would be some one-time trial and error to that approach.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Bridge CS5.1 not recognizing RAW from Canon 5DM3...

    Hello All,
    I'm having difficulty with Bridge CS5.1 recognizing RAW files from a recently aquired Canon 5DM3.
    I've downloaded the 6.7 patch and ran the adobe installer (which gave no error), rebooited the Mac, ran subsequently "purge cache" under "tools", and still no avail.    The blank icon persist, "Camera Raw Options" continues to be unavailable, and cant find where the RAW data files are/were (compounding this problem is that macs and adobe are new to me).
    I realize that this issue has been previously addressed, but following some of these suggestions, I still can't get the patch to work. Any suggestions and comments will be most appreciated.

    Like Curt stated, in PS go to menu Photoshop / About Plug ins / Camera raw. This brings a window showing the correct version number of Adobe Camera Raw (it should state 6.7 and only one version visible.
    On you system it should be in this location:
    In Finder use column mode and click on your disk with the system on it (normally it shows 4 folders: Library , Users , Applications and System) Click on Library and follow this path / Application Support / Adobe / Plug-Ins / CS5.1 / File Formats. Inhere should be only one file called "Camera Raw.plugin"
    If you click on this file the info next to it should show the version number, in your case 6.7

  • No thumbnails for XPM images

    I used to see thumbnails for my xpm images in Finder, however now I no longer see any thumbnails or preview images. How does one fix this?

    How long ago was that? Once upon a time various ai and eps files displayed thumbs in Finder, then they went away. And once Photoshop files with an alpha channel displayed correctly (I still can't believe that this was taken away and never returned). Apple giveth and Apple taketh away. AFAIK the best you can do is get a QuickLook generator that handles xpm files and then use it to see thumbs. There's one here:
    http://rene.rebe.name/2008-11-27/ei-based-quick-look-pnm-and-xpm-finally/
    I tried it and it seems to work without a problem.
    Francine
    Francine
    Schwieder

  • Is it possible to add a thumbnail to an image file with core graphics ?

    Hi,
    I'm writing a small image processing application.
    For image reading and writing I'm using core graphics (CGImageSourceRef / CGImageDestinationRef).
    Several image formats like jpeg or tiff provide the option to store a thumbnail in the file.
    To get this thumbnail I'm using
    CGImageSourceCreateThumbnailAtIndex( ... )
    which works fine so far. If there is no thumbnail in the image it is created
    with this function. Now, in the case there was no thumbnail in the image I would like to store
    the created thumbnail in the image file when I write it to the disk. So far I failed to find a function in core graphics
    to perform this task. In the CGImageDestinationRef documention it is only mentioned, that thumbnails
    are written into the output file, but not how to add these.
    I fear I'm overseeing something very trivial ...
    Regards,
    ingo

    normfb wrote:
    I believe that a Smart Object will solve your problem.
    place your original image in a new file as a smart object and do the same for the reflection (made by Transforming, reducing the opacity and introducing a mild horizontal motion blur) on its own layer, then:
    by double clicking on the smart object in the layers panel and returning to the original image, any change you make in the original and save, will automatically update the upright image and its reflection.
    Nice one Norm.  Five Kudos points to you.

  • Web Gallery - need file name on thumbnail and large image

    I think I have tried all the CS3 templates, but haven't found what our client is requesting. Is there a template that shows the file name on both the thumbnail and large image, and will make large images of 600-800 pixels (long dimension)?
    Thanks in advance,
    Dan Clark

    Thanks for your reply Nini. Yes, I had gone through all the presets and options. Was hoping I might have missed something, or that someone knew a trick/workaround. We've been using Table-Minimal for years, which is my overall favorite. I like to ability to make a large image, but it can't do what the client is requesting. They've made a list of selects from some very large galleries (200-300 shots each), and now want to jump directly to the shots they've previously chosen, in order to show their coworkers. I've also considered "Add Numeric Links", but I find that either confuses people, or they give me that number, instead of the file name/number, which makes a lot of extra work for us.

  • Cannot move browser images with ball on mouse

    I used to be able to move the browser images (in split view mode) with the roller ball on the mouse. Now I can't. Help would be very much appreciated. Thanks, jp

    Aperture 3.2.2 Frank. The mouse came with the computer. I dont think it is a mouse issue - I can scroll up and down in all other situations including the browser. I thought I must have inadvertenty hit a letter on the keyboard that turned the system off. And I was expecting a quick and simple answer. I upgraded to Snow Leopard a few months ago but do not recall the issue coinciding with this event. Using the roller ball was such an easy way to scroll through images rather than use right/left arrow or click and drag.

  • Browse image from database

    hi evey body
    i wish some one help me for solve this problem .
    when i use jdeveloper 11g to browse image from database using servlet (*without using Dynamic JDBC Credentials*) i can browse the image,
    but when i use jdeveloper 11g to browse image from database using servlet with the solution by Steve Muench, Dynamic JDBC Credentials i always get this error :
    java.Null.pointerException
    Caused By: java.sql.SQLException: ORA-01005: null password given; logon denied
    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:406)
    Truncated. see log file for complete stacktrace .
    my question why i get this error? is servlet open new session ??
    thanks in advance
    maher

    hi every body
    sorry for my repeated request , i wish some body help me to solve my problem or ask me some thing about my problem .
    this the last request for this question and i will not upset you again .
    thanks in advance
    maher

  • After importing an image from cs5 back into lightroom, lightroom is making the image darker

    Lightroom is making my images darker after i edit them in photoshop cs5 and I dont know why. When i open the image back into photoshop it looks fine. Even when i save it as a jpeg lightroom is making the image darker. When i imported the raw image into lightroom before i edited into photoshop it looked fine. Is there a way to fix lightroom?

    See screen shot:
    Click on the two small triangles and under <Lightroom General Presets> select <Zeroed>. Sorry, it seems that the option <None> is not available anymore in Lr 4.3. But <Zeroed> has the same effect.
    Alternatively, in the Develop Module, bottom right, just above the film strip click on <Reset>.  See screen shot:

  • How to browse image in NeuronDotNet drawing box

    Problem Statement :
    I am working on OCR application , I am using  “NeuronDotNet”. Currently Application taking input via human input using Mouse Control as show in following figure.
    What I need to replicate human input using browse button option , I want to give image as an input. To do that I have written following code in browse button option.
    Note : picTraining is name of Drawingbox object where I have written A
    This code work fine and give me this output.
    I have following questions.
    1. 
    PicTraining.Invalidate() only clear handwritten A , it doesn’t clear browse graphics. Why it happens , does I have write draw strokes rather than to draw graphics?
    2. 
    This continuous to above query , even this code doesn’t entertain browsed image , it only take mouse drawn graphics, so how I can draw as handwritten ?
    Ali Muhammad

    These forums are for MS products. Please post questions related to third party products in their forums.

  • How can I have a browser image that scrolls with images on top of it scrolling in tandem -

    How can I have a browser image that scrolls with images on top of it scrolling in tandem - so the background is a hexagon pattern with small images inside some hexagons and I want them all to be scrollable as a user uses the browser scroll bars. At the moment the background image jumps when I preview so the small hexagons all become out of alignment. Any tips appreciated. I have browser image set to tile - pinned at the middle and set to scrolling - the small images are not pinned -

    Thanks for your answer - The images on the top layer are also links and change to show they're links on rollover - so I wanted to keep them as separate graphics - and it works to a point but when I preview the page in a browser the tiled browser image always moves no matter how I pin it and then everything becomes unaligned. Any further suggestions appreciated.

Maybe you are looking for