Canon 6d - LR4.3 64 bit - unable to upload images

Bought 6D. Can upload images to PS6 and Picassa but not to LR4.3. LRm.3 displays the images but when I got to import states it cannot read the files. Any suggestions will be greatly appreciated.
Thanks

Check your Destination specified in the LR import panel. Not reading the files that ACR and other programs can during an Import USUALLY means that the DESITNATION has a permissions issue, so the error message means “Cannot Write Destination Files” but the error message is generated when something in LR is trying to read the files in the destination and cannot.

Similar Messages

Unable to upload images

As of a few days ago I am unable to upload images online. First I noticed it with a Mixbooks and then with Ebay. In some cases it starts to load it and then starts over and over without any success. On Ebay it just sits there preparing to upload. I tried uploading it from iPhoto and then from my desktop with the same results. The internet connection is good and firewall isn't an issue. I'm running the latest Snow Leopard version on a 6 month old 27" iMac. Any suggestions?
Thanks

Hi
On the WIKI there is a place to report performance issues:
https://lab.msdn.microsoft.com/mailform/contactus.aspx?refurl=http://technet.microsoft.com/wiki
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Unable to upload images in my blog

Dear moderators,
Sorry to post question in this forum.
I am facing issue while uploading images to the blog, "browse" button comes as disabled and I am not able to upload any images.
Kindly help me to resolve this issue?
Regards,
Sanjana

Hi Sanjana,
Check your file size and internet connections.
Regards,
Kannan

N97 - Unable to upload images to Facebook

Hi, I've been very happy with the recent v2 software update and had no problems so far (after the mess the previous firmware update left my phone in), my only problem is while using the facebook application I can no longer upload images from my phone to facebook.
It just hangs when I try to do it. I've seen a few threads about but never a solution that works for me. I've tried re-installing the facebook app from Ovi, but this didn't work either. Please can someone help! This is the main feature I use on my phone for saving and backing up my photo's remotely, and as it seems a common problem there must be a solution!
Thanks.
1020

This won't help fix your problem but a better way to upload pictures to Facebook (and other sites) is by using PixelPipe; http://pixelpipe.com/
It installs setting which use the Nokia upload online feature. if you set it to default you just take a picture and hit the upload button and voila it will send the picture to PixelPipe then onto whatever sites you have registered. You can also go into the N97 gallery, choose all the photos you want to upload and the do the same. It supports routing into specific albums or destination but I've not used this much. I have my PixelPipe configures to upload to Facebook, Flickr and Ovi all at one.
Again this won't fix your issue, which I think St3ph3n might have answered best anyhow but it's a much better way to get your photos onto Facebook.
BR,
Gavin Nesbitt
http://geekhouse.dyndns.org

Have recently upgraded to Mavericks. Since then, I have been unable to upload images to a photo lab in Melbourne - what is wrong?

I work as the photographer in a small Photography studio and we use a Lab in Melbourne to retouch and print our photographs for our clients. This Lab (Nulab) has software downloaded to my Mac from their website which I use to upload the images, request certain finishes & retouching for each file. However, in the last week, I have not been able to export these images to them in Melbourne - it creates a folder on their end and then tries to communicate back to my end, but it obviously hits something and therefore won't upload the images to their folder.
Before it stopped working, I had upgraded to the new Mavericks, I had callibrated my computer & redownloaded the software from our lab's website. Nothing else has changed. I have been through everything I can think of (security settings, Firewall, Antiviruses - disabling and uninstalling, reinstalling Lab software) as well as contacting the lab and their IT man looking into it having remote control of my desktop. We are both unsure of what has happened.
Can anyone help?

Let me make two suggestions before offering something to try;
1. Never upgrade unless you know that your mission critical software is compatible.
2. Never be without at least two separate backups. You are a business. Backups are essential.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Unable to upload into LR.3 from Canon 6D

Updated to LR4.3 but still can't upload images. I can now see the images in the Library but when I ty to upload it syas the images are not accessible.

Updated to LR4.3 but still can't upload images. I can now see the images in the Library but when I ty to upload it syas the images are not accessible.

I have a MacBook Air (10.8.2) connected to Canon MP530 printer. I'm unable to scan documents as MP Navigator is not supported. Any ideas on how to scan using this printer.

I have a MacBook Air (10.8.2) connected to a Canon MP530 printer. I am unable to scan documents as it appears my Mac does not support MP Navigator. Any ideas? I have made an inquiry to Canon but have not received any answers yet.

Why do you say your MBA won't support it? MP Navigator for OS X 8 and the MP530 is available here.

I am unable to upload any photos to photo sharing sites?

For the last two days I have been unable to upload any photos regardless of size to a professional photo sharing website. I have tried everything possible such as disabling my Norton services, emptying the DNS cache, clearing all browers histories and all cookies. I've tried creating new accounts on the website and nothing has worked. I then tried to upload photos to another site and when the photo started to load it said that I lost internet connection yet I didn't. I am able to use my daughter's dell and can upload photos just fine on any site with her computer. I did a live chat with Norton and they ran me through a series of things as well and said it is something with my mac. Does anyone have any suggestions???? I'm at a complete loss and beyond frustrated with this entire experience.

Hi, Thank you so much for the info.... I really do appreciate it. We had the laptop updated by way of a system upgrade with RAM and an additional SSD drive. Once reconfigured all programs were reinstalled but Iphoto is not among them. Iphoto was on the laptop when purchased so we have no additional discs. Before the laptop was updated we backed the photos up to an extrenal hard drive so we have them, but cant access them. Could I purchase Iphoto 8 stll? Would this work? We would also require an external CD drive as we no longer have the disc drive in the laptop (I think the extra new bits took over). You may have noticed I have very limited knowledge on computers so any help dispite how simple it may sound to some would help me greatly. I just want all my photos back .... Thanks inadvance... Hope to hear soon x

How to view resolution (ppi/dpi) and bit depth of an image

Hello,
how can I check the native resolution (ppi/dpi) and bit depth of my image files (jpeg, dng and pef)?
If it is not possible in lighroom, is there a free app for Mac that makes this possible?
Thank you in advance!

I have used several different cameras, which probably have different native bit depths. I assume that Lr converts all RAW files to 16 bits, but the original/native bit depth still affects the quality, right? Therefore, it would be nice to be able to check the native bit depth of an image and e.g. compare it to an image with a different native bit depth.....
I know a little bit of detective work would solve the issue, but it
would be more convenient to be able to view native bit depth in
Lightroom, especially when dealing with multiple cameras, some of which
might have the option to use different bit depths, which would make the
matter significantly harder.
This
issue is certainly not critical and doesn't fit into my actual
workflow. As I stated in a previous post, I am simply curious and wan't
to learn, and I believe that being able to compare images with different
bit depths conveniently would be beneficial to my learning process.
Anyway,
I was simply checking if somebody happened to know a way to view bit
depth in Lr4, but I take it that it is not possible, and I can certainly
live with that.
Check the specifications of your camera to know at what bit depth it writes Raw files. If you have a camera in which the Raw bit depth can be changed the setting will probably be recorded in a section of the metadata called the Maker Notes (I don't believe the EXIF standard includes a field for this information). At any rate, LR displays only a small percentage of the EXIF data (only the most relevant fields) and none of the Maker Notes. To see a fuller elucidation of the metadata you will need a comprehensive EXIF reader like ExifTool.
However, the choices nowadays are usually 12 bit or 14 bit. I can assure you that you cannot visually see any difference between them, because both depths provide a multiplicity of possible tonal levels that is far beyond the limits of human vision - 4,096 levels for 12 bit and 16,384 for 14 bit. Even an 8 bit image with its (seemingly) paltry 256 possible levels is beyond the roughly 200 levels the eye can perceive. And as has been said, LR's internal calculations are done to 16 bit precision no matter what the input depth (although your monitor is probably not displaying the previews at more than 8 bit depth) and at export the RGB image can be written to a tiff or psd in 16 bit notation. The greater depth of 14 bit Raws can possibly (although not necessarily) act as a vehicle for greater DR which might be discerned as less noise in the darkest shadows, but this is not guaranteed and applies to only a few cameras.

New user with lightroom 5. Now unable to publish images to Flickr.

Have previously been able to post images from Lightroom to Flickr but now receive warning from Lightroom telling me to connect to the internet. After visiting and deleting previous authorisation on Flickr then re-activating it unable to post images. Any suggestions welcomed
SH

Hi grantsburg
Download it again from the below link : http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html
Follow the instucrtions carefully to start your download

Unable to upload "filescopied_48862.txt" to update the current view of the

Hi Team,
While applying applications patch I am getting the below error in the patch log file.
Start Processing Snapshot Info
AutoPatch error:
Unable to upload "filescopied_48862.txt" to update the current view of the snapshot.
But when I checked in the ad_bugs table it is showing the bug_number.Actually this patch has to change the version of file fadp6.lpc,but it is not changing it.
We already have updated current view snapshot.
Please suggest me on this.
Thanks,
Suresh

Hi Hussein,
Thanks for quick reply and the details are:
Q)Please post the application release, database version and OS.
ApplicationRelease:R12.1.1
Database Version:11.1.0.7
OS:Windows Server 2008(32 bit)
Q).What is the patch number?
12338963
Q).Is this the complete error message?
In the whole patch log file this is the only error it is showing.
Q).Did the patch continue to run after this error and completed successfully?
Yes It has continued to run after this error and completed successfully.
Q).Please apply the patch again from the beginning and see if you encounter the same issue.
I have applied the patch again from the beginning and we are getting the same error.
The only error in patch log file it is showing is:
Start Processing Snapshot Info
AutoPatch error:
Unable to upload "filescopied_48862.txt" to update the current view of the snapshot.
Q).What is the version of fadp6.lpc you already have? What is the version of fadp6.lpc delivered by this patch? Have you verified the timestamp of the file?
fadp6.lpc 120.36.12010000.7 and the timestamp is:2009/07/28 07:55:40
Version of fadp6.lpc delivered by this patch is:120.36.12010000.13
Thanks,
Suresh

Unable to create image buffer after RAM preview

Running into an odd and frustrating error. Built a comp using the new Ray-traced 3D renderer and now I'm regretting being an early adopter big time with all the problems I've been encountering with it. The latest comes whenever I do a longer RAM preview in an attempt to watch the whole duration of my comp. It will get to about 170 frames or so, at which point I've interrupted by pressing spacebar because I don't need to see all the way to the end of my work area (around 220 frames). It'll play the RAM preview back fine, and even loop it, but as soon as I stop playback, I get this error message: "After Effects warning: Unable to create image buffer." There's only one button: "okay" and as soon as I click it the same error pops up again and it will never go away, forcing me to close AE from the task manager. I've taken to saving before every RAM preview like I used to do with Flash before previewing my buggy swfs for fear I'll lose all my work after previewing. Any ideas about what might be causing this?
Some more details about my comp:
1920x1080 @ 29.97
Ray-traced 3D
About 70 3D layers (I'm guessing this is my downfall - new renderer not designed for this many layers?)
Running Windows 7 Professional
i7 2600K
32GB RAM
2x GTX 570 video cards running latest driver (301.42, CUDA 4.2.1)
508GB free on my 2TB internal drive where the project and cache lives
From my GPU info window in case it's useful:
Fast Draft:
Available
Texture Memory:
600.00 MB
Ray-tracing:
GPU
OpenGL
Vendor:
NVIDIA Corporation
Device:
GeForce GTX 570/PCIe/SSE2
Version:
3.0.0
Total Memory:
1.20 GB
Shader Model:
4.0 or later
CUDA
Driver Version:
4.2
Devices:
2 (GeForce GTX 570, GeForce GTX 570)
Current Usable Memory:
1.04 GB (at application launch)
Maximum Usable Memory:
1.25 GB

Yeah, some buffer is very likely not flushing when you interrupt the preview and then there is no more memory on the graphics hardware. Consider setting the work area and your preview options to use only the work area. if it finishes the preview "correctly", it may not suffer the issue. Beyond that - raytracing doesn't/ shouldn't care about the number of items. The math is such, that it makes no difference whether you render a million polygons or just one. Of course there are still limitations due to the GPU dependency, but I doubt you ever truly exhaust the cards' geometry buffers. Compared to pixel data that is a small amount...
Mylenium

Unable to upload the PAR from NWDS

Hi ,
I am unable to upload the par from NWDS as it is throwing the error "Unable to upload"
I have done the proxy settings in NWDS.
can any one tell me is there any other settings i have to do in NWDS.
Thanks
Ajay

Hi Ajay,
Have you copied the NWDS installed stuff from other system and working on that?
Anyway, you can go about this way to upload your par.
Goto System Administration -> Support -> portal runtime -> Administration console -> Browse and add your par -> say upload. Thats it and your par is uploaded:-).
Hope it helps.
Regards
Deepa
Pls reward points for helpfull answers.

XLS upload via HSODBC. Unable to upload numeric (float) fields

hi,
I wrote a program unit with Oracle Forms Builder 10g to upload and read an Excel sheet.
I created a HSODBC Data link to my DB, and used Excel 2003 to edit the XLS file to upload, and WEBUTIL_FILE_TRANSFER.CLIENT_TO_AS(client_dir_file,'\\server\dir\myfile.xls') to upload.
My DBLink works and Im able to upload the file. But it seems oracle is unable to upload some fields containing numeric (float) values.
running DESCRIBE Sheet1$@hsodbc; I got this table structure
UPLOAD_DATE          DATE
NUMBER VARCHAR2(32512 CHAR)
CODE VARCHAR2(32512 CHAR)
DESCR          VARCHAR2(32512 CHAR)
SIMILARS FLOAT(49)
WIDTH VARCHAR2(32512 CHAR)
HEIGHT VARCHAR2(32512 CHAR)
HIGH      VARCHAR2(32512 CHAR)
ITEMS      FLOAT(49)
fields SIMILARS, WIDTH, HEIGHT, HIGH, ITEMS contain numeric values in float format (ex: 1,00000). When I run
SELECT * FROM SHEET1$@HSODBC
I get that WIDTH, HEIGHT, HIGH columns are EMPTY (contain NULL values), while SIMILARS and ITEMS contains not null values.
I am sure that the \\server\dir\myfile.xls contains not null values for WIDTH, HEIGHT, HIGH fields! I tried to change cells format before upload, setting them to FLOAT, but I got no results!
Please help me, how can I do to change cell format in order to obtain a correct upload?

E.C.
there is a mistake in the subject. As I said in my thread, the upload works and the uploaded file contains all values. My problem is that I am "unable to READ" the numeric values stored in VARCHAR2 fields.

Unable to upload the updated/modified Report template (rtf file) in siebel

Hi,
I am unable to upload the updated/modified Report template (rtf file) if already exists in the local database.
Initially I have uploaded a rtf template, generated xliff, registered it and can view the report from the registered view. Later I have made few changes to the rtf template, in the reports template view, I have uploaded this. When i run the report in the registered view, I am able to see the earlier version and it doesnt show me the updated changes.
I am using 8.1.1.3 siebel and BIP 10.1.3.3.1 on local.
Looking at the metalink found "How To Upload Modified RTF Template Files In The Siebel Application For BI Publisher Reporting [ID 1136418.1]" which is related to server but I am working on local database
Please find attached the template, xml file. can you please look into this and update me ASAP
Thanks,
RV

Hi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean

Canon 6d - LR4.3 64 bit - unable to upload images

Similar Messages

Maybe you are looking for