Canon 7 d mkII photos not reading in lightroom...what do i need to do?

I am attempting to upload RAW photos shot with a Canon 7D Mk II...Lightroom indicates preview not available...any suggestions?
Thanks!

However, it has been stated that DPP is not supported in Yosemite for the Mac.
Still the case unfortunately.
http://photofocus.com/2014/11/01/canon-eos-utility-vs-osx-yosemite/
No doubt Canon is working on it but it's puzzling that Canon is so slow to issue updates. Not the first time either.

Similar Messages

  • HT3986 i can only acess the internet on mac but when i switch over to windows 7 it does not read my wifi what will i need so that i can use internet on both?

    what is the answer to this?

    Well, the answer was to read the Boot Camp Documentation, but as you have passed that phase.
    Reboot into OSX, run Boot Camp and download the Windows Support Software: Reboot to Windows and install them.
    manuals.info.apple.com/en/boot_camp_install-setup.pdf

  • Please help!! I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    WOOHOO!!! i finaly fixed the problem. Here is what to do:
    Chances are if you did the same thing as me you either have
    A) No album names at all for ALL your songs in your library
    or
    B) Have the same name for every album for ALL your songs in your library.
    Here is how to fix it (yah it will take a little work but its worth getting your iPod functioning properly).
    Unless you dont want to have to go and actualy set al lthe album names for every song here is what you can do:
    Go through to iTunes and arange your songs by Artist name. Click the top song for your first artist, hold Shift and click the last song for that same artist (to multi select all the songs for the artist) go into get info and check the Album box. Copy the name of the artist to the Album box and hit ok.
    Now when u update your ipod and go into ur Artists section the actual Artist name should show up instead of the song names.
    For some reason having the same album name for all your songs messes up the organization of the iPod.
    Hope this helps anyone else that is having the same problem

  • My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
    Product updates

  • HT1727 I cant sign in to iCloud with my Apple ID, it says "this Apple ID is valid, but is not an iCloud account, what do I need to do to sign in to iCloud?

    I cant sign in to iCloud with my Apple ID, it says "this Apple ID is valid, but is not an iCloud account, what do I need to do to sign in to iCloud?

    Hello, kitkatshaw. 
    Thank you for visiting Apple Support Communities.
    This sounds like you are attempting to create an iCloud account with your Apple ID through iCloud.com.  In order to create an iCloud account, you must sign up via one of the options below.
    You can sign up for iCloud on an iPhone, iPad, or iPod touch with iOS 5 or later, or through System Preferences on a Mac with OS X Lion v10.7.4 or later.
    Creating an iCloud account: Frequently Asked Questions
    http://support.apple.com/kb/ht4436
    Cheers,
    Jason H.

  • "The iTunes library file cannot be saved.  You do not have enough access privileges for this operation."  Help!  This keeps coming up.  I've not changed anything.  What do I need to do to fix this?

    "The iTunes library file cannot be saved.  You do not have enough access privileges for this operation."  Help!  This keeps coming up.  I've not changed anything.  What do I need to do to fix this?

    Sounds like a Windows user privelidge problem.  Are you using an administrator account on the PC?

  • Macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

    macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

    If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
    You will have to have all computers authorised with the relevant Apple ID's
    Store  >  Authorise this computer...
    This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
    If both Computers use the same apple id this step is not required.

  • I have been trying to update to iOS 5 and every time I hit update it says, " There was a problem downloading the software for the iPhone. The network connection could not be established."  What do I need to do to update to solve this problem?

    I have been trying to update my iPhone 4 with iOS 5 for about 30 minutes and I keep getting the same thing. It says,"There was a problem downloading the software for the iPhone. The network connection could not be established." What do I need to do to solve this problem?

    iOS: Resolving update and restore alert messages
    For error -50: See error 13 and 14: 
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • When trying to up date firefox it tells me just to save the file not to run t, what do I need to do?

    when trying to up date firefox it tells me just to save the file not to run t, what do I need to do?
    == This happened ==
    Every time Firefox opened

    Download the latest version from here: [http://www.mozilla.com/en-US/]
    Then run the installer and it'll update you to the latest version.

  • I bought a used 160GB ipod and I cant get my computer to read it. What do I need to do?

    I bought a used 160GB ipod and I cant get my computer to read it. What do I need to do?

    Is your iTunes running the latest version? If not, but the iPod you've bought has been set up to work with the latest version, then iTunes probably will not recognise it.
    In iTunes, select Help/Check for updates. If there is a newer version, make sure you are running that before connecting the iPod again.
    If that isn't the problem - or more to the point - it doesn't fix the problem, post here again so that anyone watching it can suggest the next step.

  • I have adobe reader 8. What do I need to be able to edit the PDF so I dont have to convert to Word?

    I have adobe reader 8.  What do I need in order to edit PDF docs so I dont have to try to convert to Word?

    With just the free Reader? No way that I know of. You would need Acrobat.

  • HT4623 I updated my iphone to the new version and now it tells me to connect to itunes  which I did and it's not doing anything else, what do I need to do?

    I updated my iphone to the new version and now it tells me to connect to itunes  which I did and it's not doing anything else, what do I need to do?

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore

  • My CD Drive in my Macbook is not reading CD. What can I do to resolve this?

    The Macbook is about 4 years old and has a Matshita CD-RW CW-8221 Drive in it. It won't play movie's or read software. I am thinking that the drive may just be dirty and need to be cleaned. Any thoughts?

    Will it read audio CDs? (In other words, is it just a problem with DVDs, or are CDs not read, either?)

  • Deleted all .kext files and now my macbook pro would not switch on. What do I need to do?

    By mistake I deleted all .kext files in the extensions folder and now the macbook will not go past the error screen at the start up with panic kernel. What do I need to do? How do I restore from back up drive or even re install OS???

    Are you able to get into Recovery Mode (Command+R) at startup?
    If your back up is a Time Machine back up you can boot from it by restarting while holding the Option key and select the back up drive. From there you can reinstall OS X Mavericks or Restore.

  • Canon EOS 1d MkII will not connect properly

    I am running an up to date version (1.1.1) but all that happens is that the camera keeps connenting and disconnecting literally every second. Does anyone else have this problem or know how to solve it? My camera is running on AC power so that is not the problem. Will this software ever work properly??

    I shoot with 1Ds Mark II's. The camera USB port is for direct printing (not downloading) and the digital/firewire port is for shooting tethered or downloading.
    You should make sure that you have the latest Canon Software, DPP v2.1.1, and EOS Utility.
    When you are connected be sure not to turn on the camera's display since that will cut off the connection with a computer temporarily.
    I do use the fw cable to shoot tethered to DPP with my cameras. I've never used it to download direct from the camera. Myself and most pro's I know use card readers which tend to be faster. I can confirm that a 1Ds Mark II CF card in a card reader shows up with no problem in Aperture.
    Apple has a help document on this that is very accurate:
    http://docs.info.apple.com/article.html?artnum=303189
    It recommends a card reader and if you read the last couple of lines it sounds like downloading from the camera is not necessarily supported with all models.

Maybe you are looking for