Canon 70D and Canon RS-80N3 Remote Switch

Can the Canon RS-80N3 Remote Switch be used with the Canon 70D. Is an adapter needed to allow the use.

An adapter is needed.
All of these wired remote releases use 3-conductor wire. On the 70D, the camera uses a 3-conductor jack that resembles a stereo headphone jack. On the RS-80N3, the jack is completely different.
You may want to just get an RS-60E3 since it's fairly inexpensive.
If you were using the Canon TC80N3 remote trigger / intervalometer, then it'd be worth getting the adapter.
The Canon RA-E3 adapter cable has one end that goes into the 70D (most any camera that uses stereo-headphone jack style connector) and the other end has the 3-conductor plug that the RS-80N3 and TC80N3 use.
The "trick" is finding the RA-E3. The only reason I knew this thing existed is because it comes with the Canon 60Da astrophotography camera. But it turns out Canon doesn't normally sell it as an accessory. You actually have to call their parts department -- it's treated more like a replacement part than an accessory cable.
Tim Campbell
5D II, 5D III, 60Da

Similar Messages

Trying to access remote switch via VLAN1 (which is shutdown)...

We were trying some things to get multiple VLANs to pass through some wireless bridges. In the confusion, we have misconfigured the port and locked ourselves out of the far switch, lol. The local switch has VLAN1 (default), VLAN2 (data), and VLAN3 (voice). None of the VLANs are shutdown and the switch has an interface for both VLAN2 and VLAN3. The remote switch also has VLAN1, VLAN2, and VLAN3 (and it has an interface for VLAN2 and VLAN3). However, VLAN1 is shutdown. The port used to connect it to the local switch has always been using VLAN2. In the midst of some changes, that port got changed to VLAN1 :( We can no longer access the remote switch at all. It does still show up in cdp neighbors on the local switch (although it says VLAN1 mismatch). Is there anyway we can get back into the remote switch without having someone go on site and perform a power cycle? Thanks.

Here is the email from Planet Networing:
About your inquiry:
I have two WNAP-6305 bridges connecting two Cisco switches. The Cisco switches are configured for trunking, but only one VLAN is being passed through the bridges. Every other bridge that I've worked with will allow all VLANs to pass through. Is there a way to allow that with these units?
Answer:
The WNAP-6305’s SDK didn’t support tagged VLAN, so only the default VLAN can be passed through the WDS bridge.
We’ll suggest you use WNAP-6350.

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

Tethered shooting with Canon 70D and Lightroom 5 on Mac

I am tired of looking at a tiny screen on my Canon 70D and learned about tethering my camera to the Macbook. Well, I am about to purchase the cable, and thought to look into if Canon 70D is supported. Now I see that many have problems with it and wonder what I can do?
This forum stuff is so tedious and I just want a straight answer from Adobe what is possible and what is not, yet they make you search the Internet for hours wondering how to formulate the question so you get the right answers. Then you wait…. and "maybe" you get the right answer.

70D isn't supported for tethering.
Tethered camera support in Lightroom
Ten seconds in Google.

Transparent vlan and management of remote switch

Hi,
I'm a bit confused regarding the native Vlan of 1262 bridge ...
My design is LAN---RAP ---- MAP---remote-SWITCH with two Vlan : one for the data and one for the management.
I keep the vlan 1 for management at this point, but I'm still unable to access the remote switch.
On LAN side, the switch port is on trunk mode (native vlan 1 and vlan 2 allowed)
On RAP the Gigabit Ethernet is on normal mode
On MAP the Gigabit Ethernet is on normal mode
On remote-SWitch, the switch port is on trunk mode (native vlan 1 and vlan 2 allowed)
Transparent vlan is disabled on WLC and Ethernet Bridging is checked for both AP.
It seems that it's not possible to bridge the Vlan1 as it used for the backhaul so does it means
that for management purpose I must use a specific Vlan-id ? And if my understanding is correct, to define this vlan-id
as native on MAP with the Ethernet Port set as Trunk and on others switchs ( LAN side and remote-Switch).
thks for your reply

If you have Ethernet bridging enabled and have defined the vlan for the bridging, then the rap has to be connected to a trunk port and the traffic from the device that is connected to the MAP will egress out of the RAP's Ethernet port onto the trunk port. If you don't define and vlan for bridging then the traffic will be placed on the vlan the RAP is assigned to.
https://supportforums.cisco.com/servlet/JiveServlet/downloadBody/21766-102-1-53166/Understanding%20mesh%20ethernet%20bridging.pptx
https://supportforums.cisco.com/docs/DOC-21766
Sent from Cisco Technical Support iPhone App

Extender 1.4 to use with 70D and EF 70-200 f/4 IS. Any compatibility problems?

I am planning to get the Extender 1.4 to use with my EOS 70D and the EF 70-200mm f/4 IS. Are there any compatibility problems with this combination?
Solved!
Go to Solution.

ebiggs1 wrote:
"... they will work perfectly together."
Perfectly may be a stretch but, yes, they will work as well as the combo can. Anytime you add something like a tele exrender you have to give up something. In photography you give to get. There is no free lunch. Fortunately you are starting out with a pretty good lens and can afford to lose an f-stop and some IQ.
Let me pose a slightly different question. Suppose you already have (as many of us do) a 70-200mm f/2.8L IS II. Suppose you add the 1.4 tele-extender. The combination would result, I believe, in a 98-280mm f/4, a potentially useful lens that doesn't appear in Canon's lineup. So given the cost of the TE and the image quality of the combination, is buying the TE a smart move?
Note that buying the TE does not compromise the 70-200 in any way, since it's still as good as it ever was without the TE. The combination, for the price of the TE, stands or falls on its own.
Bob
Boston, Massachusetts USA

Collect Mini-RMON from Remot Switch

Hi
How can I collect the mini-rmon data from remot switch and send it to NAM ?
Regards

I dont think it is possible to collect this data from the remote switch. Why do you need this data?

Why is my Apple Remote switching songs randomly?

Good afternoon everybody,
I just purchased a replacement remote (original model) for my (original) Apple Universal Dock. I am using it with the 6th Gen ipod Nano. When I press the "next song" button, it switches to a random song instead of the next song on that album. What gives?
For the record, it does this whether shuffle is enabled or not.
Thanks!
EDIT: It appears that when I synched the remote to the dock, shuffle was enabled on my ipod. After I turned it off using the ipod screen, the remote still shuffled until I selected another playlist.
Problem is pretty much resolved....

Welcome to the Apple Community.
If you don't want to use a remote with your computer the easiest thing to do is just to turn the IR off. (System Preferences/Security/General)
If you still want to use your computer remote then you must pair your computers remote with the computer AND the Apple TV remote with the Apple TV.
To pair a remote with a device hold down the menu and FF buttons together for six seconds or until you see a chain icon on screen (best take the computer into another room, or turn it off, when you do this)

Replicating clobs and blobs in a remote database across dblink

9iR2
When creating a materialized view in a warehouse pointing to a remote table in an OLTP environment, I got this error when trying to replicate a table with 3 clobs.
ORA-22992: cannot use LOB locators selected from remote tables
So, how does Oracle recommend replicating Blobs and Clobs in a remote database/warehouse? Evidently using materialized views doesnt work.

MV replication is obsolete.
Move to 10gR2 and use Streams.

My fiance logged onto my iphone with his apple ID and now I can't switch it back to my username. How can I change it back to mine? ( but when I go to setting,icloud my un/pw are there)

My fiance logged into my iphone with his apple ID and now I can't switch it back to my username. When I go to buy an app his username is in an editable format to beable to change it back to mine. How can I change it back to mine? (when I go to setting,icloud my un/pw are there) Can someone please help? Thanks!

Had you looked in the User Guide, you would have found this: Settings>Store. Tap on AppleID to change.

I have 3dparty software wirelessly with a cryptographic authentication system without my consent (seems to be new technology developed by stanford) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail break. Now what?

I have 3rd party software wirelessly injected and used on my iphone with a cryptographic authentication system without my consent (seems to be new technology developed by stanford and apple security is not updated for this technology) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail breaking my phone, adding and removing software, changing settings all from a remotely controled device from different location (I have a Mac address I'd of this device to know for sure). Almost undetectable. When I look at the legal section of my phone it shows a list of all the unauthorized 3rd party software "as is" copyright encrypted on the phone. This is the most basic way to legally steal software of any kind. Because of this legalality 3rd party ownership have total control of certain software correlated with hardware use including visualization technology, etc. most people luckily will never have this happen to them so it's unlikely many readers have not a clue of what I'm saying currently. Either way, without needing to obtain specific warranty of any kind "as is" copyright control makes system restores not a solution because the source code is not directly encrypted on the actual hardware device only a copy right notice must appear on the specific device 3rd party software validation making it extremely difficult for me to take control of the situation. Apple claims their iOS technology prevents this type copyright obstruction from being possible, however, according to my phone a new form of technology was used developed by Tom wu of Stanford university called the STANFORD SRP AUTHENTICATION TECHNOLOGY which uses Some form of cryptographic authentication system and uses quote "secure remote password" which seems to suceed in hacking iOS apple technology apple claims is not possible to jailbreak an unstolen phone or without the owners consent As well as loading the device with 3rd party copyright Notices to make all of this legalized. My phone shows atleast 30 pages worth of legalized 3rd party copyright permissions! Yesterday my apple care provider labeled me a jailbreaker and refused to look at my legal documented proof which completely blew my mind because it voides my apple care contract I spent 100 on. This employee did not take all factors into consideration and made quick assumptions as well as verbally speaking to me as I'm an automatic criminal. I left the store yesterday with no payed insurance help on a problem I had no control over and couldn't prevent, leaving with voided contracts. This is an apple users worst nightmare and I have spent days researching all of this like i am some kind of lawyer only to be able to use my phone the way it should and spent alot of money on. I can legally backup any claim I have just wrote above currently and have a large source of data collected to prove apple is wrong in voiding insurance support on this issue. The problem lies in apple avoiding and not wanting to believe their software can legally be obtained ot "hacked". Yet still labeled a jailbreaker basically.. What should I do????? Been to local apple store 3 times and rebooted my phone as well sprint service restore 4 times and spoke with reps twiice on the phone. Spoke with my phone provider who said apple has full control over these matters so they can't help me. My case is according to apple "still open"...Anyone else heard of this or of Stanford's office of technology licensing? Maybe I need to buy a blackberry again or just use a landline so I can stop being my own lawyer and focus on other productive areas in life instead of this horrible mess. I shouldn't have to prove to apple I not a jailbreaker they should have to prove I'm one before voiding support I desperately need!!

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

I have an iphone 4 for verizon and i am going to switch phones and get a droid motorolla 4g phone and the droid doesnt have a sim card. does my iphone 4 have a sim card that i can put in the droid? can i buy sim cards separately online for the droid?

i have an iphone 4 for verizon and i am going to switch phones and get a droid motorolla 4g phone and the droid doesnt have a sim card. does my iphone 4 have a sim card that i can put in the droid? can i buy sim cards separately online for the droid?

Brandon2184 wrote:
The iPhone 4 uses a "Nano SIM"
The CDMA iPhone 4 does not use a SIM at all. There is no SIM slot. It is a pure CDMA phone.

Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?

My screen sharing functionality did not show up in the dock with an updated icon. It had a question mark- shows my connections but nothing works, I did make sure screen sharing is on and also connected to VPN. Once I tried to launch screen sharing nothing happens. Such an elegant solution in Mavericks not does not work. Ugh. Help!

This is the post that got me set up- I too am running an older version at work vs. Yosemite. As soon as I followed is advice everything worked.
Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?
I believe the location of the "Screen Sharing" app has changed, which explains why if you had it in the dock it has been replaced by a ?
Don't forget you can launch screen sharing (once your VPN connection is up) by typing in the Safari destination slot vnc://remotemachinename:portnumber (omit the :port number if you are using the default VNC port, 5900). This should launch Screen Sharing and put its icon in the dock. You can drag the Screen Sharing icon to the left of your dock and it will hopefully remain there after you exit Screen Sharing, or you can right-click on the icon when it's running and select Options->Show in Finder to find out its new location and drag its icon to the permanent entries in your dock.
Hope this helps; worked for me.

TS1741 I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

HT1386 When I go to do an update for my apps on my iPhone 4S it says that I am connected to the Chinese iTunes Store and tha I need to switch to the US store. How do you do that?

When I go to do an update for my apps on my iPhone 4S it says that I am connected to the Chinese iTunes Store and tha I need to switch to the US store. How do you do that?

Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.

Canon 70D and Canon RS-80N3 Remote Switch

Similar Messages

Maybe you are looking for