Canon 7D and mRAW and sRAW

Looks like the 7D is now supported but only for RAW and not mRAW or sRAW.
Anybody any ideas if this is going to happen ?

I can now import my RAW images from the 7d and they display in Aperture. Main issue is they are tiny in size. The image in the main viewer is about 4"x3" even in full screen mode, little more than the thumbnails. I've rebooted but no different. I've been converting to DNG using Adobe Converter then importing to Aperture up until now. Looks like that's still the only option for me. Anyone else hit this issue with Apples attempt to support the 7D?
Cheers
Roddy

Similar Messages

Aperture and sRAW (Canon 50D)

Does anyone know of a reason why Aperture seems to not fully support the sRAW format? My personal experience has shown me that bringing an sRAW (7.1 mp) file from my Canon 50D into Aperture will result in a much noisier image. Several of the RAW Fine Tuning adjustments are also grayed out (sharpening, denoise, etc). When I bring in a full RAW (15mp) file, Aperture automatically brings the noise level down a reasonable amount once the preview is rendered.
Here is a comparison; both images were shot at the same settings, one at sRAW and one at RAW, and I did not perform any adjustments in Aperture, just imported and exported a full JPEG.
sRAW
RAW

Sorry, I wasn't thinking straight, I was thinking the forum would shrink them but I don't know why I thought that would help.
@Keith
I haven't tried DPP yet, but importing the same sRAW files into The Lightroom 4 beta produces much better results. I can see a slight difference between the RAW and sRAW processing in Lightoom, but they are 99% similar, whereas I would say in Aperture the difference is dramatic.
I have learned to stay in RAW, but I would appreciate the ability to shoot sRAW. I was hoping for perhaps a camera profile or other solution, but I suppose I'll have to stick with RAW or look into Lightroom
Thanks for the help

TS3147 After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple,"

After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.

rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades.

Lack of support for Canon G7 and G9. Alternatives?

I am really disappointed about the lack of support for the Canon G9, and looking at the list of compatible cameras (http://docs.info.apple.com/article.html?artnum=306835) I notice that Canon G7 - even if it does not have a RAW format, is not supported either.
I am thinking that the purchase of the G9 may have been premature and that I may need to sell it and get another cam that is supported by Apple/Aperture.
What would you guys do? Is there a cam out there similar to the G9 at the moment that has a Apple-supported RAW format?
Best regards,
Kjell Are Refsvik

I think the camera closest to the G9 that has RAW support from Apple are the Panasonic DMC-LX2/Leica D-Lux 3 twins. Don't know where you are, but in the US, the Panasonic costs about $400. 10MP, 28-112mm (35mm equivalent) Leica lens, very compact body, and RAW output. The Leica costs $599, and has that classic look.
I don't know much about that cameras, but you may want to investigate.
Message was edited by: rkkwan
Message was edited by: rkkwan

How to open Raw files from Canon 1100D and 650D in CS5?

I need assistance please. I have a Canon 1100D and 650D. On Photoshop CS5 it does not recognise the 2 Cameras Raw files. What is my course of action. Help will be highly appreciated

evjems, As per the below article, Canon EOS 1100D needs minimum Adobe Camera Raw(ACR) version 6.4 and Canon EOS 650D needs minimum ACR version 7.1
Camera Raw plug-in | Supported cameras
So, you should be able to open raw files of 1100D, if you upgrade your PS ( Help > Updates), but not of 650D as it needs PS CS6 and above.
Let me know in case you still have any doubts.
Hope that Helps!
~ Arpit

I have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application

i have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application was not found in the location /Applications." can anyone give me step by step instructions? i would hate to call the geek squad!!!LOL

and what's a firewire port? how do i know if i have one?

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

Canon MF4150 and Airport Extreme

A good friend of mine recently bought the Canon MF4150 (on my recommendation) for his home office. He needed to replace his ageing laser printer and wanted a AIO laser with faxing support, preferably from the Mac. According to the specs, the MF4150 did all this, so he purchased the unit and rang me when he couldn't get it working on his AEBS.
The MF4150 uses Canon's proprietary pdl called UFR2. Having used this driver with the imageRUNNER MFD's, I knew it was a driver that worked via TCP/IP and AppleTalk. So I thought it would work fine with his wireless network. But I was wrong!
After connecting the MF4150 to the AEBS USB port, the PSU was opened and Add selected. The MF4150 was displayed as a Bonjour device in the Default Browser view, but when the MF4150 was selected, the Print Using menu couldn't find the correct driver. If you browsed to the Canon folder, no UFR drivers were available, only the Canon BJs and GIMP/Gutenprint drivers.
Now, according to the manual, the correct procedure to add an iR via UFR is to select More Printers > Canon IP (UFR2). Then you input the IP address and leave the queue name blank. The driver then queries the printer and selects the appropriate 'ppd'. So, hoping that the USB port is somehow mapped to the AEBS's IP address (which according to Apple tech info (107998) it is possible for XP to print to the USB port by using IP) I was hoping the same could be done for OS X. But unfortunately it didn't work; the spooler stops as soon as the job is sent. The cups log shows the following...
I [26/Jul/2007:13:27:52 +1000] Job 195 queued on '192168_11' by 'wazza'.
I [26/Jul/2007:13:27:52 +1000] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 373) for job 1.
E [26/Jul/2007:13:27:52 +1000] [Job 1] fatal: The printer is not supported, or the printer information is not acquired correctly. If the printer is supported, delete the printer from the printer list then add it again.: 10322
E [26/Jul/2007:13:27:52 +1000] PID 373 stopped with status 82!
The error was generated because it is not possible to manually select the UFR2 driver, and the driver fails to find the printer on the AEBS USB, so it defaults to a Generic device, which the printer does not support. If the printer supported PS, or even PCL, then we may have been able to use a compatible driver, such as one of the Gutenprint drivers. But alas, the MF4150 only supports UFR2, and it only has a USB port, so it seems that there is no way that this model can be connected to wirelessly from OS X
So let this be a warning to anyone looking at the Canon MF4150 and who wants to use the device on their wireless OS X network. It works fine via the Mac USB (and Windows via wireless) but cannot be installed via the AEBS USB (AFAIK)...

Hi Greg,
The UFR2 driver supports both network and USB printing, so what you have written is not the issue. If the printer is connected directly to the Mac's USB port, the driver software will determine the printer model and select the appropriate 'ppd'. However, it seems that when the same device is advertised via Bonjour, whatever information the software is expecting to be received is not, and therefore the 'ppd' is not selected. I therefore believe this is a Canon software procedural issue, rather than a protocol issue. And in typical Canon style, rather than resolving this problem, they release another model (MF4680) that can work around this limitation...
Paul

Both our Canon Pixma And Kodak wifi printers do not seem be recognized by our Airport Extreme. Is there a special way to configure the Extreme.

We had a Linksys modem-router configuration previously and it worked just fine for all three printers in our home. 2 Canon's and 1 Kodak. In addition, my HP laptop cannot use the network at all and Im forced to use my mifi card at home for my work computer. I thought Airport would improve communications and instead we seem to have just the opposite. Is there a utility we can use to allow everything to communicate with one another

If all of your wireless clients are unable to connect to the new AirPort Extreme, there may be something amiss with either the Extreme's settings or the modem/Extreme interface if you are also not able to access the Internet with your HP laptop.
When changing ISPs (or networking equipment) it's always a good idea to start from "scratch" in configuring your equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.
Please post back your results.

Canon Elura and Powershot no longer are recognized by 10.4.7

Looks like others are having this same problem, but there are no answers to the previous posts, so thought I'd add my problem to the queue. I'm pasting in the response I got from Canon when I emailed them. Apparently they recognize that the recent upgrade has created communication/recognition problems with Mac. Obviously their suggestion to use iPhoto to upload pics is not a solution. They state that they are working on it, and I wondered if Mac was working on the problem from their end. Thanks.
Dear Customer;
Thank you for your inquiry. We value you as a Canon customer and
appreciate the opportunity to assist you.
Please note, with the update of OS 10.4.7, we are experiencing an issue
with USB communications. You may attempt to download using Apple's
software iPhoto.
Currently, our only suggestion is to revert back to Mac OS 10.4.6 if you
wish to keep USB communication. Our engineers have been notified and
are currently investigating the cause of this issue. You may also wish
to contact Apple for possible updates to resolve this issue.
Please let us know if we can be of any further assistance with your
PowerShot A60 and Elura 60.
Thank you for choosing Canon.
Sincerely,
Technical Support Representative G5 Desktop Mac OS X (10.4.7)
G5 Desktop Mac OS X (10.4.7)

aspi5:
Welcome to the Apple Discussions. Which Powershot camera are you having problems with? Did you update to 10.4.7 via the Software Update preference pane? If you download and reinstall the 10.4.7 COMBO updater followed by a repair of disk permissions.
With the camera attached check System Profiler and see if it recognizes the camera. You can try using Image Capture, located in the Applications folder, to download from the camera to the desktop. If will often work.
Do you Twango?

Problem with Canon Printer and Leopard

I have a Canon Ink-Jet (Pixma IP 4200) printer, which, until two days ago was running fine.
Since then, I've been unable to print on it - either I get the error message that the printer is out of paper, when it isn't, or that the computer cannot connect with the printer.
I've tried uninstalling the printer, and re-installing it, both with the Canon drivers, and with the Gutenprint ones, but to no avail.
Not only that, but when the printer is connected via the Canon drivers, either wirelessly, or via USB, then my MacBook fan starts to run all the time, very loudly. Once I delete the printer again, then the MacBook becomes silent within thirty seconds.
Weird, huh?
Any ideas????

Try running a reset printing system. Open System Preferences > Print & Fax. Then hold down the Control key and click your mouse in the Printers list. A menu showing Reset printing system should appear. Click this.
Now restart your Mac and then add the Canon driver again. Hopefully this gets things working for you again.
PaHu

Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer

Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer with the driver that came with the printer and I've tried to find an update but with no success, can you help me?
Thanks!!

you can try resetting the network settings in settings or you can try doing a reset - hold down the home/power button together until you see the apple logo and then release. Then wait for the phone to boot back up. You won't lose any data.

I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. What do I do to fix this?

I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. I downloaded the camera raw and dng converter for it, but realized in the process that the one I downloaded does not work with my Mac version, 10.9.5.

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium

Canon Log and Transfer problem

Hello all,
I'm trying to upload some HD files from my Canon HF20 on the latest edition of FCP to my iMac 10.58 and running into a problem.
FCP recognizes the video captured on the internal memory. However, it does not recognize the video captured on the SD card in the camera.
Any ideas?

Well, I'm connected to my iMac using a USB. (iMac is running version 10.58 of Leopard). I'm using the latest version of FCP 7.0.2
I can log and transfer files "taped" to the internal memory of my HF20. Files show up fine and import fine.
However, the files that are on the SD card in the camera don't show up in the Log and transfer. ( I put the SD card on a card reader and still no luck.)
I put the card back into the camera and hit the "Add volume" on the top left of the log and transfer and I can see my Canon drive and the other drive which is called "No Name" (I'm assuming simply because I haven't named it anything) I'm also assuming the No Name Drive is the SD card. However, I may be wrong. All the files are grayed out on this drive.
Not sure what else I need to add to give you more info. Let me know if what other info needed and I'll post it.
Thanks again!

I have a Canon MP640 and I am trying to connect my Macbook Air to the wi-fi how do I do this?

I have a Canon MP640 and I am trying to connect my Macbook Air to the wi-fi how do I do this? I have been able to connect through the USB no problems.

What version of mac are you running? Have you downloaded any of the drivers/software off the website yet? If not, you will need to download and install the CUPS Printer Driver and the Canon IJ Network tool.
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp640#DriversAndSoftware
Then, you will want to open and use the Network Tool to set up the network connection
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=69015
Hope this helps!

Canon 7D and mRAW and sRAW

Similar Messages

Maybe you are looking for