Canon 7D-Mac won't see it

Oops, I posted this as a reply in another topic, so I'll do it here as a new one. My Mac won't see my Canon 7D when I plug it in. It should show up as a drive, just like my little AVCHG camera does. I have installed Canon's EOS Utility software, and it will see the camera and take in stills, but not video. So I know the cable is OK. Any thoughts? Thanks.

Had the same issue when a client brought in a HD project on a 5D MKII.
I located the movies on the 5D with iPhoto and imported them and then moved them to
my capture scratch folder. There's probably a better way but that worked for me with a tight deadline.
Have you tried Log & Transfer??

Similar Messages

Mac won't see some files/folders on external hard drive that i know are there, pc sees them fine..

I have a external drive full of music, my mac won't see all of it , its like some files are hidden... I have formatted the drive to exFAT and copied folders I knew were missing and they won't read that way either... I have as well renamed the folder to something different, but the Mac still will not see them, but my PC sees them fine... anyone??

Same problem here!!!

Lost New iPod. Mac Won't See Old iPod.

I recently bought a new iPod and gave it a different name in iTunes. A few days ago I lost it. Now my Mac won't see my previous 4th Gen iPod. Any suggestions. Tried reset. Tried reloading iTunes.

I have a 1st or 2nd gen Ipod that uses Firewire and when I update my iTunes it shut out my ipod and now neither my G4 or G5 recognizes my ipod. I can't use the ipod reset utility because computer wont acknowledge it. I look in System Profiler and under Firewire computer knows it's there but wont bring it up on the desktop or itunes. I tried using USB but that was crap. Help

External HD connected to Airport - Mac won't see it

Just bought an external HD (Lacie 2big tripple) and connected it to the airport extreme via USB.
The HD won't appear on my Mac (MacBookPro). The disk utility won't find it.
The Airport utility recognizes the HD (giving correct information about size and free space), but that's all.
When I connect the HD directly to the computer (either via FireWire or USB) everything works. The HD apears on the desktop. By the way:When I initialized the disk and copied some stuff from the computer's HD to the external one I used the wired fire wire connection.
Any ideas what I am doing wrong?

So, after several hours of fight I reached the follwing status:
- have this disc now as a folder of the "shared disk" airport base station
- - the disc utility won't recognize it
- the time machine is not able to make new copies altough a partition was configured previously (when wired)
At least I can use the storage for my media files, but my intention is to see and use the disk in the same way as if it would be conected via wire to the computer (as in the previuos post).
So can somebody share his/her expericences with an external HD connected via the Airport Extreme?
I mean
- can you see it in the disk utlitility
- can you see it in the finder as a "normal" drive as it ws connected by wire and not as a folder of a shared disk
- can you make a partition for the time machine purposes?
- can you see it

Mac won't "see" my camera

Hi,
When I plug my Nikon camera into my Macbook, nothing happens. No icon on the desktop or anything. I have loaded the Nikon Transfer CD and just downloaded an update. But still, nothing. I emailed Nikon's tech support many days ago but they are very slow to help.
Please does anyone have any ideas?
Someone did tell me that I should try a card reader, but I am about to go travelling for a few weeks and don't want to have to carry more stuff. However, it would be nice to download my photos.
All other USB devices (memory sticks, external hard drives, printer, iPod etc) work absolutely fine. But the Mac doesn't seem to "see" my camera when I connect it.
Thank you.

Great. Image capture worked. Thank you. However, (1) is it okay that I just switched off the camera and then unplugged it? (there was no icon to drag into the bin to eject), (2) now I have an annoying little window that I can’t close telling me “no image capture device connected”.
Not sure how I change the default from whatever it is now to Nikon? Maybe that would make a difference. But it’s strange that the Nikon software doesn’t work.
Thanks everyone

Can't Restore because Mac won't see ipod

Ipod 2.3 was dropped several feet. (Thanks to my cat.) Could not get a menu to appear.
1. I reset by pushing select and menu buttons. Now all a keep getting is Apple logo, OK to disconnect (Disk Mode) and file with exclamation mark.
2. I trashed itunes and down loaded new itunes. When I went to reinstall ipod software it keeps asking me to hook up ipod. It is plugged in. I have tried both firewire ports.
Ipod keeps clicking and will do this for several minutes until very hot.
I would like to kill my cat. Any suggestions? (Regarding the ipod - not killing my cat.
G4-ipod 2.3 Mac OS X (10.3.9)

I am having the same problem. Network settings are correct, cleared the old ipod update software out of the iPod Software Updates folder and truned my firewall off. Still no luck and nothing in the knowledgebase. Has nothing to do with the language as discussed in another post in this thread.
Dell Windows 2000

ITunes Mac won't see my iPhone 5 so it can sync?

iTunes 11.1.3 on my iMac iOS X 10.7.5 will not see my iPhone 5. Why? I just updated my iTunes so maybe that has something to do with it. Help?
I can't sync my phone til iTune will "see" it.

Article TS1538 5. Verify that the Apple Mobile Device USB Driver is installed

Canon MF4890 Drivers Won't Install On Mac Running Mavericks

I just purchased an MF4890. I use a Macbook Pro running Mavericks. The disk that came with the printer doesn't support Mavericks and when I download the drivers from the Canon website, they won't install. If I keep the driver image on my Mac desktop, the printer will print for a time -- but then it no longer sees the printer. This isn't normal. I should be able to eject the disk image (as in every other application), and the app/drivers should be installed on my mac. When I as much as created a folder on my desktop and moved the disk images into the folder (print/fax/scan), the mac no longer sees the printer (wireless).
Help! Does this printer support Mavericks?

Hi BonnieBoop.
The imageCLASS MF4890dw does support printing on the OS X Mavericks operating system. You should be able to open on the Mac_MF_Ver1010_00.dmg file and run the installer package. The icon looks like an open brown box. Next just follow the steps to install the driver.
If you are not able to see this information or if the setup does not allow you to save the information, we recommend that you contact us at 1-800-OK-CANON (1-800-652-2666) and a live technical support representative will be glad to assist you.
Have a good day.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Mac Mini - Core Solo - Won't See Any Wireless network

I have a Mac Mini, first gen Intel, Core Solo, that won't see any wireless networks. However, it will see my extreme basestation, and my two airport express devices over bonjour, which makes me think that the wireless device is working.
I've reset the PMU, with no luck.
Any suggestions?

Does an Airport card show in the system profiler?
Is Airport switched on in your mini - the Airport icon in the menu bar should show at least grey bars rather than an empty white 'fan' shape?
With Airport on, when you click on the Airport icon, does it show any network?
If you click on 'Join Other Network' and type the name of the wifi network you run, what error message does the system give?
How far away from the wifi base station is the mini? What kind of structures and environment is it in?
If you move the mini to be in close proximity to the wifi base station, does it show any signal?
When you download a copy of AP Grapher (http://www.chimoosoft.com/apgrapher.html) and run it, what does it show for signals, noise etc?
How is the mini seeing any wifi devices via Bonjour - do you have it wired into your network? If so, the fact that the devices appear via bonjour doesn't mean they are transmitting wifi, nor that they are in range.
By the way, the Core Solo mini doesn't have a PMU to reset. If you used the PMU reset procedure it won't have helped, and may actually have caused problems. The correct procedure for an Intel-based mini is an SMC reset, as follows:
-From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
-Unplug all cables from the computer, including the power cord and any display cables.
-Wait at least 15 seconds.
-Plug the power cord back in, *making sure the power button is not being pressed* at the time.
-Then reconnect your keyboard and mouse to the computer.
-Press the power button on the back to start up your computer.

Mac Book Pro won't see my iTunes Library on an external drive

I have a brand new Mac Book Pro and my iTunes Library is on an external drive. My computer won't see this Library even if I change the location under Preferences. All I can see are my purchases from the iTunes Store on my iCloud. I don't want to clutter up my MBP with my iTunes Library so what should I do?
I'm running Yosemite and latest iTunes
Thanks for any help
Les

Really a library, or just media? A library is a complete collection of files an folders including the critical iTunes Library.itl file, generally all enclosed in an "iTunes" folder. You do not direct iTunes to open a library with preferences, you do it by holding down the option/alt key while starting iTunes and guiding it to the .itl file you wish it to use.

Suddenly Mac mini won't "see" external drives. Possible related to OS software update to 10.6.8?

Suddenly Mac mini won't "see" external drives, neither Firewire nor USB. Possible related to OS software update to 10.6.8? Worked fine under 10.6.4. Any advice? Thanks.

Turns out it was nothing to do with the OS update, it was just a loose cable plug connecting my FireWire/USB hub to the computer. But your tip is a good one -- I'd been wondering why the external drives (even when mounted properly) weren't showing up in the sidebar. Thanks!

Find my iPhone won't see my Mac's

As above, Find my iPhone won't see my Mac's it will see my Iphone and Ipad but for some reason it will not see the Macs. Yes they are enabled all I get on the F M Ip screen is no location. Do I have to switch on location services somewhere and if so where.
Thanks for your help

wjosten and other experts,
I have to turn "airplane mode on and off" to make the "find my iphone" work each time I start my iphone. But it only lasts 30 minutes or so. (with the iphone being switched on continuously) Then FMiP will stop working until I repeat turning on and off the airplane mode again. This sequence needs to be repeated after each 30 minutes or so.
Is there any fix available for this problem? A friend said Apple has issued iphone software v 3.3 in Japan but I cannot find it here in Canada.
Thanks.

Installed Yosemite - Canon MF8300C printer won't print or scan to the MAC.

I recently installed the Yosemite and now my Canon MF8300C printer will not print or scan.
Printing - I get an error message: Stopped - 'Filter' Failed X pages
Scanning - I get the device to show up but when I select Open Scanner nothing happens.
I have had this printer on Mac Mini for 2 years now. I did not know it at the time but this printer and MAC have always had handshake issues. I often have to turn it off and back on to get the wi-fi address to be recognized, or have to re-install the drivers, even though I have downloaded directly from Canon. This is a top notch home office printer why have the drivers not been made compatible by now?
I can print fine to my trust old Samsung ML-1650 but that does not solve my color or scanning needs that worked up until I installed Yosemite. What gives?

With regards to printing, you need to have installed the MF v10.4.0 driver that supports Yosemite. If you have installed this driver and you still get the Filter failed error, then I suggest you remove the MF from Printers & Scanners and then open Finder and select Go > Go to folder. Then enter /Library/Printers/Canon and press the Go button, With the Canon folder open you will see a folder called CUPS_MF_Printer. Trash this folder and then empty the Trash. Restart the Mac and run the MF v10.4.0 driver installer again and add the printer. Now see if it prints without error.
As for the Scanner, while in the Canon folder you should also see an entry called MFScanner. Trash this folder if present then run the ScanGear v2.3.0 installer for Yosemite. Now see if you can scan, making sure that you do have the Scan button selected on the MF and set to Remote Scanner.

Help! Mac won't start. I hear the ding and see the apple logo but the bar below it never goes further than an inch before the screen goes dark. I have tried unplugging.

Help! Mac won't start. I hear the ding and see the apple logo but the bar below it never goes further than an inch before the screen goes dark. I have tried unplugging.

Hello Templemeads,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Have a nice day,
Mario

After upgrade to latest firmware canon network printer won't print

after upgrade to latest firmware canon network printer won't print. It's a canon MP540 on a wireless network. It will print a test page but won't print from any application, just sits there with the message 'copying print data'!
Running Mac OS X Lion 10.7.2 (11C74), with firmware SMC Version (system): 1.73f63.
Any help gratefully received.

First off if you can print a test page there is absolutely no reason you wouldn't be able to print from a application...none. But stranger things have happened now that we have Lion. Within the application are you selecting the wireless printer........just had to check.
I have the MP620 which is simlar to your MP540 and have no problems printing from my MBA (June 2011). I too have the latest firmware and software......without problems printing.
A few things I'd try would be to remove the wireless printer from your computer (in Preferences, printers), restart, and repair permissions. Then add the wireless printer back, and see if it works. If not.....power OFF the printer and turn back on.
If the above fails reinstall the printer driver (yours) I think you will have to plug in the USB cable.
Keep me updated and I'll tyr and help!

Canon 7D-Mac won't see it

Similar Messages

Maybe you are looking for