Canon 7D Mark II fails to connect with LR 5.7 for tethered shoot.

Canon 7D2 fails to connect with LR 5.7 for tethered shoot.  
The camera connection does work with Canon EOS Utility.
LR sees the camera but fails to establish and maintain connection.  See small video clip to view the camera and computer behaviour while attempting to connect.
https://dl.dropboxusercontent.com/u/28457054/7D2%20tethered%20test.m4v
I also have the Canon 5D3 and have no issues connecting with various software (EOS Utility, LR, Helicon Remote) on that computer.  I have a MacBookPro mid-2009 running OS X 10.8.5.  Lightroom, Camera Raw and EOS Utility are up to date, same goes for the 7D2 firmware.

It usually takes many months and perhaps more than one version of LR before tethering is supported after raws are supported.  The first hurdle is for the camera manufacturer to release a new SDK with the camera supported, so Adobe can’t have tethering ready when raw support is because a camera isn’t added until after it is announced.  Canon has added the 7D.2 to their SDK about two weeks after the camera was available, so the ball is in Adobe’s court:
http://www.usa.canon.com/cusa/consumer/standard_display/sdk_homepage

Similar Messages

  • When replying to an add on Craig's List, for example, it goes back to my old email address I had with IE, and fails to connect with the ad's author and I'd like to know how to make it use my gmail address with Firefox instead.

    When replying to an ad, via email, posted on Craig's List , for example, it attempts to use my old email address I had with IE, then fails to connect with the ad's author. How do I get it to only use my gmail address with Firefox?
    == This happened ==
    Every time Firefox opened

    See https://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

    My office is setting up a new gateway server.  I can connect to the old one just fine, but the new one is not allowing me to connect.  I can connect from my Windows VM, but not my Mac Client.  
    This is the log:
    2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
    screen mode id:i:0
    use multimon:i:0
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
    [2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
        User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
    Found
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
    And here's a log for server that I can connect to:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
    [2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
    [2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
    [2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
    [2014-Nov-26 15:52:29] RDP (0): Server hides cursor
    [2014-Nov-26 15:52:31] RDP (0): Server shows cursor
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
    Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated. 

    Hi Jeremy,
    Thank you for posting in Windows Server Forum.
    From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    Configuration used and full address name both appears different so please verify configuration accordingly.
    Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
    You can follow below guide to configure RD Gateway and after that verify the result.
    1. Deploying Remote Desktop Gateway RDS 2012
    2. How To Work with RD Gateway in Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Why I it said "Your purchase could not be completed"and also fail to connect with the iTunes Store ?

    Why I it said "Your purchase could not be completed"and also fail to connect with the iTunes Store ?
    Thank you so much for that !

    Click here and ask the iTunes Store staff for assistance.
    (100884)

  • RPE-02150: Failed to connect with user... when deploying location

    Hello.
    I've created cube and 3 dimentions in OWB 10.2, then derived them to make business definition for Discoverer 10.1.
    When I try to deploy this business definition, I get error "RPE-02150: Failed to connect with user xxx, password ***, connection null. Disco export file 5039.eex written to directory owb/deployed_files." The error appears at deploying location step. What feature is that?
    Thanks,
    Evgeni

    Hi,
    same situation, same behaviour. I've seen, that the location for the discoverer could only be of type 10.1 database in the lov of the location form. But the database is 10.2. Perhaps that might be the problem.
    Do you have any other suggestions?
    Ciao Stephan

  • Can a iPad be setup for tethered shooting with a Nikon dslr

    Can a iPad be setup for tethered shooting with a Nikon Camera

    Not as a standalone solution if you want stuff like live view and all the camera controls on the iPad. If it's just for transferring photos to the iPad for immediate viewing after shooting the Shuttersnitch app comes to mind. Shuttersnitch however requires a WiFi connection that most Nikons don't happen to have. Nikon's wireless dongles for the consumer range of cameras are also somewhat awkward to use whereas the wireless/Ethernet units for the pro range happen to be very expensive. WiFi SD-cards are also a possibility for retrofitting WiFi but they tend to be unreliable, slow and their setup is quite often finicky.
    Another solution would be tethering the camera to a laptop (Win or Mac) through USB and connecting the iPad as a secondary wireless tethering device to the computer. There are programs for Mac and Windows incorporating this feature. I once set this up for a friend who does a lot of studio work but it ended up that he just uses the USB-connected laptop almost exclusively. And unless one would be out for a timelapse shooting already carrying tons of gear not a solution for shooting in the field.
    Last not least but also not exactly inexpensive is the Camranger remote control for Nikon and Canon DSLRs. It connects to the camera through USB and has its own server and WiFi built in which allows to connect to iOS, Android, Mac and Windows (apps for all available by Camranger themselves). Probably the most flexible and comfortable solution especially when considering that it can be used for multiple cameras and will mot likely also work with future cameras. More information can be found at http://www.camranger.com (I'm in no way affiliated with them and personally don't own a Camranger remote so I would advise some more web research on user experiences).

  • Wicd fails to connect with a WEP key

    I'm trying to connect to my wireless network after the recent update to net-tools. I sorted through most of my issues with the hostname command (I think) by installing inetutils and the recent update to wicd. Now, after trying to reconnect, my /var/log/wicd/wicd.log looks like the following:
    2011/10/04 09:23:48 :: trying to automatically connect to...UVEE2
    2011/10/04 09:23:48 :: Connecting to wireless network UVEE2
    dhcpcd[12869]: dhcpcd not running
    Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
    dhcpcd[12912]: dhcpcd not running
    2011/10/04 09:23:48 :: Putting interface down
    2011/10/04 09:23:48 :: Releasing DHCP leases...
    dhcpcd[12967]: dhcpcd not running
    2011/10/04 09:23:48 :: Setting false IP...
    2011/10/04 09:23:49 :: Stopping wpa_supplicant
    Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
    2011/10/04 09:23:49 :: Flushing the routing table...
    2011/10/04 09:23:49 :: Putting interface up...
    2011/10/04 09:23:51 :: Attempting to authenticate...
    unlink[ctrl_iface]: No such file or directory
    Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
    2011/10/04 09:23:51 :: connect result is Failed
    2011/10/04 09:23:51 :: exiting connection thread
    2011/10/04 09:23:51 :: Sending connection attempt result bad_pass
    dhcpcd[13034]: dhcpcd not running
    Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
    dhcpcd[13078]: dhcpcd not running
    This looks strange to me because I am connecting to a wireless network that has a WEP hex key, and nothing in my configuration suggests any WPA key. I even tried rm-ing all of the *.conf files in /etc/wicd/ to no avail. Thank heavens for netcfg, or I think Arch Linux would have just blown my network stack again, the way the net-tools "upgrade" did
    Does anyone have any tips on how to solve this?
    P.S. Maybe it would be good to have some testing process for future updates affecting network connectivity? If this were my only computer I would totally have been dead in the water with the net-tools update. It took a sizable amount of time and effort to find out I needed to bootstrap the hostname command. For a while, before I figured to check the wicd logs, I was considering just dropping Arch Linux. Breaking the internet is just about the worst because you leave people with broken systems and no way to look up how to fix them.

    Sorry, but I don't think that thread applies here. That thread is dealing with the net-tools upgrade, and the missing hostname utility. I fixed that, dhcpcd works just fine. My problem is that after the wicd update, it tries to use WPA to connect to a network that I have specified as using WEP, so it fails to authenticate.

  • R3load.exe failed to connect with return code2

    Dear Experts,
    I am installing SAP netwaver 7.4 PI server on Windows server 2012 and MS SQL 2012.
    This is a domain installation so infra team have created 2 users <SID>ADM and SAPService<SID> user with local admin rights.
    I have installed MS SQL with windows authentication only installation and after that i was able to connect Db with SQL management studio.
    As soon as i have started PI installation after SWPN created DB schema ,granted permission for users and restarted Db engine ...boom error in ABAP import phase as "R3load.exe failed to testconnect with return code2".
    I have updated r3trans,r3load,dbsl lib.etc but no good also i have tried to open MS sql management studio but now it is giving error as
    "unable to connect with <SID>ADM user"
    Any suggestion or help will be highly appreciated.
    Warm Regards,
    Sumit 

    Dear Ashutosh and Atul,
    please find logs
    R3load.exe.log
    E:\usr\sap\PID\SYS\exe\uc\NTAMD64\R3load.exe -testconnect
    -------------------- Start of patch information ------------------------
    patchinfo (patches.h): (0.036) R3ldctl: fix CDS views creation in upgrade export mode (note 2017805)
    DBSL patchinfo (patches.h): (0.033) Memory leak in DBSL reconnect (note 2010675)
    --------------------- End of patch information -------------------------
    process id 9136
    (DB) ERROR: db_connect rc = 256
    (DB) ERROR: DbSlErrorMsg rc = 99
    Trans.log
    4 ETW000 R3trans was called as follows: E:\usr\sap\PID\SYS\exe\uc\NTAMD64\R3trans.exe -x
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [     dev trc,00000]  Thu Jun 05 14:14:49 2014                                               99602  0.099602
    4 ETW000  [     dev trc,00000]  db_con_init called                                                       135  0.099737
    4 ETW000  [     dev trc,00000]  set_use_ext_con_info(): usage of ssfs switched off (rsdb/ssfs_connect=0)
    4 ETW000                                                                                                 245  0.099982
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  47  0.100029
    4 ETW000  [     dev trc,00000]  create_con (con_name=R/3)                                                 22  0.100051
    4 ETW000  [     dev trc,00000]  Loading DB library 'dbmssslib.dll' ...                                    70  0.100121
    4 ETW000  [     dev trc,00000]  DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, count 1, addr 00007FFFF69A0000
    4 ETW000                                                                                               14312  0.114433
    4 ETW000  [     dev trc,00000]      using "E:\usr\sap\PID\SYS\exe\uc\NTAMD64\dbmssslib.dll"               29  0.114462
    4 ETW000  [     dev trc,00000]  Library 'dbmssslib.dll' loaded                                            32  0.114494
    4 ETW000  [     dev trc,00000]  function DbSlExpFuns loaded from library dbmssslib.dll                    29  0.114523
    4 ETW000  [     dev trc,00000]  Version of 'dbmssslib.dll' is "741.10", patchlevel (0.33)                916  0.115439
    4 ETW000  [     dev trc,00000]  function dsql_db_init loaded from library dbmssslib.dll                 8596  0.124035
    4 ETW000  [     dev trc,00000]  function dbdd_exp_funs loaded from library dbmssslib.dll                  56  0.124091
    4 ETW000  [     dev trc,00000]  New connection 0 created                                                  62  0.124153
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                8067  0.132220
    4 ETW000  [     dev trc,00000]  db_con_connect (con_name=R/3)                                             54  0.132274
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  38  0.132312
    4 ETW000  [     dev trc,00000]  find_con_by_name found the following connection:                          22  0.132334
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                  47  0.132381
    4 ETW000  [     dev trc,00000]  Thread ID:11864                                                         5905  0.138286
    4 ETW000  [     dev trc,00000]  Thank You for using the SLODBC-interface                                  59  0.138345
    4 ETW000  [     dev trc,00000]  Using dynamic link library 'E:\usr\sap\PID\SYS\exe\uc\NTAMD64\dbmssslib.dll'
    4 ETW000                                                                                                  51  0.138396
    4 ETW000  [     dev trc,00000]  7410 dbmssslib.dll patch info                                             40  0.138436
    4 ETW000  [     dev trc,00000]    SAP patchlevel  0                                                      107  0.138543
    4 ETW000  [     dev trc,00000]    SAP patchno  33                                                         36  0.138579
    4 ETW000  [     dev trc,00000]    Last MSSQL DBSL patchlevel 0                                            26  0.138605
    4 ETW000  [     dev trc,00000]    Last MSSQL DBSL patchno         33                                      26  0.138631
    4 ETW000  [     dev trc,00000]    Last MSSQL DBSL patchcomment Memory leak in DBSL reconnect (2010675)
    4 ETW000                                                                                                  38  0.138669
    4 ETW000  [     dev trc,00000]  ODBC Driver chosen: SQL Server Native Client 11.0 native                2199  0.140868
    4 ETW000  [     dev trc,00000]  lpc:(local) connection used on EQSPIDEV                                  370  0.141238
    4 ETW000  [     dev trc,00000]  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2551]
    4 ETW000                                                                                              103595  0.244833
    4 ETW000  [     dev trc,00000]  (18456) [28000] [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'EQUDOM\pidadm'.
    4 ETW000                                                                                                  51  0.244884
    4 ETW000  [     dev trc,00000]  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2551]
    4 ETW000                                                                                                6321  0.251205
    4 ETW000  [     dev trc,00000]  (18456) [28000] [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'EQUDOM\pidadm'.
    4 ETW000                                                                                                  49  0.251254
    4 ETW000  [     dev trc,00000]  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2551]
    4 ETW000                                                                                                5918  0.257172
    4 ETW000  [     dev trc,00000]  (18456) [28000] [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'EQUDOM\pidadm'.
    4 ETW000                                                                                                  50  0.257222
    4 ETW000  [     dev trc,00000]  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2551]
    4 ETW000                                                                                               28076  0.285298
    Database services are running.
    Warm Regards,
    Sumit

  • Network Manager fails to connect with Huawei E3276 modem after upgrade

    Hi,
    I have Huawei E3276 (lsusb: Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard).
    I wasn't updating the system for a long time (since KDE 4.14.3), but after upgrade Network Manager can't connect anymore.
    I also tried on the fresh install on different machine (KDE + Plasma 5.3), but I get the same error...
    Error: failed to connect modem: Only IPv4 is supported by this modem.
    I realize that this problem has nothing to do with KDE, but with new version of NM + MM, systemd, dhcpcd or dhclient?
    Why now Network Manager don't use ppp like before upgrade (different connection type "cdc-wdm0")?
    I would be grateful for any advice.
    After upgrade (KDE 4.14.3 -> 15.04 apps/5.2 plasma):
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: starting connection 'Orange'
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) started...
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> NetworkManager state is now CONNECTING
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): device state change: prepare -> need-auth (reason 'none') [40 60 0]
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) complete.
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) started...
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) complete.
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Simple connect started...
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Simple connect state (4/8): Wait to get fully enabled
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Simple connect state (5/8): Register
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Simple connect state (6/8): Bearer
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Simple connect state (7/8): Connect
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> registered)
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): modem state changed, 'connecting' --> 'registered' (reason: user-requested)
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <warn> (cdc-wdm0) failed to connect modem: Only IPv4 is supported by this modem
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): device state change: prepare -> failed (reason '(null)') [40 120 1]
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> NetworkManager state is now DISCONNECTED
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> Disabling autoconnect for connection 'Orange'.
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <warn> (cdc-wdm0): Activation: failed for connection 'Orange'
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): device state change: failed -> disconnected (reason 'none') [120 30 0]
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): deactivating device (reason 'none') [0]
    Before upgrade (KDE 4.14)
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) starting connection 'Orange'
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> (ttyUSB1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> NetworkManager state is now CONNECTING
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) scheduled...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) started...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) complete.
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect started...
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect state (4/8): Wait to get fully enabled
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect state (5/8): Register
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect state (6/8): Bearer
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect state (7/8): Connect
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> (ttyUSB1) modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <warn> (ttyUSB0): port attributes not fully set
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect state (8/8): All done
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> (ttyUSB1) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <warn> (ttyUSB0): failed to look up interface index
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) scheduled...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) starting...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> (ttyUSB1): device state change: prepare -> config (reason 'none') [40 50 0]
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) successful.
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) scheduled.
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) complete.
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) started...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> (ttyUSB1): device state change: config -> ip-config (reason 'none') [50 70 0]
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> using modem-specified IP timeout: 20 seconds
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> starting PPP connection
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> pppd started with pid 780
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) complete.
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) started...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    mar 23 19:31:33 AsusN56VZ pppd[780]: Plugin /usr/lib/pppd/2.4.6/nm-pppd-plugin.so loaded.
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: Plugin /usr/lib/pppd/2.4.6/nm-pppd-plugin.so loaded.
    mar 23 19:31:33 AsusN56VZ kernel: PPP generic driver version 2.4.2
    mar 23 19:31:33 AsusN56VZ pppd[780]: pppd 2.4.6 started by root, uid 0
    mar 23 19:31:33 AsusN56VZ pppd[780]: Using interface ppp0
    mar 23 19:31:33 AsusN56VZ pppd[780]: Connect: ppp0 <--> /dev/ttyUSB0
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: Using interface ppp0
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: Connect: ppp0 <--> /dev/ttyUSB0
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...
    mar 23 19:31:33 AsusN56VZ pppd[780]: CHAP authentication succeeded: Welcome!!
    mar 23 19:31:33 AsusN56VZ pppd[780]: CHAP authentication succeeded
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: CHAP authentication succeeded: Welcome!!
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: CHAP authentication succeeded
    mar 23 19:31:33 AsusN56VZ kernel: PPP BSD Compression module registered
    mar 23 19:31:33 AsusN56VZ kernel: PPP Deflate Compression module registered
    mar 23 19:31:35 AsusN56VZ ModemManager[267]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: access technology changed (umts -> hspa-plus)
    mar 23 19:31:35 AsusN56VZ NetworkManager[268]: <info> PPP manager(IP Config Get) reply received.
    mar 23 19:31:35 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    mar 23 19:31:35 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 5 of 5 (IPv4 Commit) started...
    Linux Mint 17.1 KDE (works the same like Arch before update)
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) starting connection 'Orange Standard access - with image compression'
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> (ttyUSB1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> NetworkManager state is now CONNECTING
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) scheduled...
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) started...
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) complete.
    May 7 20:06:33 mint17-vm ModemManager[781]: <info> Simple connect started...
    May 7 20:06:33 mint17-vm ModemManager[781]: <info> Simple connect state (3/8): Enable
    May 7 20:06:33 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> (ttyUSB1) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
    May 7 20:06:33 mint17-vm ModemManager[781]: <warn> (ttyUSB1): port attributes not fully set
    May 7 20:06:33 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
    May 7 20:06:33 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
    May 7 20:06:34 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: signal quality updated (80)
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> registered)
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Simple connect state (4/8): Wait to get fully enabled
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Simple connect state (5/8): Register
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Simple connect state (6/8): Bearer
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> (ttyUSB1) modem state changed, 'enabling' --> 'registered' (reason: user-requested)
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> WWAN now enabled by management service
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Simple connect state (7/8): Connect
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> (ttyUSB1) modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: signal quality updated (77)
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: access technology changed (unknown -> lte)
    May 7 20:06:35 mint17-vm ModemManager[781]: <warn> (ttyUSB0): port attributes not fully set
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Simple connect state (8/8): All done
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> (ttyUSB1) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
    May 7 20:06:35 mint17-vm NetworkManager[835]: <warn> (ttyUSB0): failed to look up interface index
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) scheduled...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) starting...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> (ttyUSB1): device state change: prepare -> config (reason 'none') [40 50 0]
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) successful.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) scheduled.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) complete.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) started...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> (ttyUSB1): device state change: config -> ip-config (reason 'none') [50 70 0]
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> using modem-specified IP timeout: 20 seconds
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> starting PPP connection
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> pppd started with pid 2468
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) complete.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) started...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    May 7 20:06:35 mint17-vm pppd[2468]: Plugin /usr/lib/i386-linux-gnu/pppd/2.4.5/nm-pppd-plugin.so loaded.
    May 7 20:06:35 mint17-vm pppd[2468]: pppd 2.4.5 started by root, uid 0
    May 7 20:06:35 mint17-vm pppd[2468]: Using interface ppp0
    May 7 20:06:35 mint17-vm pppd[2468]: Connect: ppp0 <--> /dev/ttyUSB0
    May 7 20:06:35 mint17-vm NetworkManager[835]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0)
    May 7 20:06:35 mint17-vm NetworkManager[835]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...
    May 7 20:06:35 mint17-vm pppd[2468]: CHAP authentication succeeded: Welcome!!
    May 7 20:06:35 mint17-vm pppd[2468]: CHAP authentication succeeded
    May 7 20:06:35 mint17-vm kernel: [ 82.363825] PPP BSD Compression module registered
    May 7 20:06:35 mint17-vm kernel: [ 82.368188] PPP Deflate Compression module registered
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> PPP manager(IP Config Get) reply received.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 5 of 5 (IPv4 Commit) started...
    May 7 20:06:36 mint17-vm NetworkManager[835]: <info> (ttyUSB1): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
    May 7 20:06:36 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 5 of 5 (IPv4 Commit) complete.
    May 7 20:06:36 mint17-vm NetworkManager[835]: <info> (ttyUSB1): device state change: secondaries -> activated (reason 'none') [90 100 0]
    May 7 20:06:36 mint17-vm NetworkManager[835]: <info> NetworkManager state is now CONNECTED_GLOBAL
    Last edited by Shocker (2015-05-07 19:18:43)

    This week, after update, modem works again.
    However, there's a new bug in the kernel, which was not there before:
    kernel: huawei_cdc_ncm 3-2:1.2 wwp0s20u2i2: kevent 12 may have been dropped
    but the modem works and connects to the network.
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> Auto-activating connection 'Orange'.
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: starting connection 'Orange'
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) started...
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> NetworkManager state is now CONNECTING
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) complete.
    may 24 09:32:44 AsusN56VZ ModemManager[338]: <info> Simple connect started...
    may 24 09:32:44 AsusN56VZ ModemManager[338]: <info> Simple connect state (1/8): Unlock check
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Simple connect state (2/8): Wait to get fully initialized
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (locked -> initializing)
    may 24 09:32:47 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2: unknown notification 3 received: index 2 len 4
    may 24 09:32:47 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2: unknown notification 3 received: index 2 len 4
    may 24 09:32:47 AsusN56VZ ModemManager[338]: Invalid mobile equipment error code: 50
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (initializing -> disabled)
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Simple connect state (3/8): Enable
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <warn> (ttyUSB1): port attributes not fully set
    may 24 09:32:47 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'locked' --> 'disabled' (reason: unknown)
    may 24 09:32:47 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'disabled' --> 'enabling' (reason: user preference)
    may 24 09:32:47 AsusN56VZ NetworkManager[342]: <warn> (cdc-wdm0) failed to enable modem: GDBus.Error:org.freedesktop.ModemManager1.Error.Core.InProgress: Cannot enable modem: already being enabled
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
    may 24 09:32:48 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2: unknown notification 3 received: index 2 len 4
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> registered)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (4/8): Wait to get fully enabled
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (5/8): Register
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (6/8): Bearer
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'enabling' --> 'registered' (reason: user-requested)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (7/8): Connect
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> registered)
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'connecting' --> 'registered' (reason: user-requested)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect started...
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (4/8): Wait to get fully enabled
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (5/8): Register
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (6/8): Bearer
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (7/8): Connect
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (8/8): All done
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'connecting' --> 'connected' (reason: user-requested)
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 2 of 5 (Device Configure) scheduled...
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 2 of 5 (Device Configure) starting...
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: prepare -> config (reason 'none') [40 50 0]
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 2 of 5 (Device Configure) successful.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 2 of 5 (Device Configure) complete.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 3 of 5 (IP Configure Start) scheduled.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 3 of 5 (IP Configure Start) started...
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: config -> ip-config (reason 'none') [50 70 0]
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> Activation (wwp0s20u2i2) Beginning DHCPv4 transaction (timeout in 15 seconds)
    may 24 09:33:08 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2 wwp0s20u2i2: kevent 12 may have been dropped
    may 24 09:33:08 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2 wwp0s20u2i2: kevent 12 may have been dropped
    may 24 09:33:08 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2 wwp0s20u2i2: kevent 12 may have been dropped
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> dhclient started with pid 3624
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): IPv6 configuration disabled
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 3 of 5 (IP Configure Start) complete.
    may 24 09:33:08 AsusN56VZ dhclient[3624]: DHCPDISCOVER on wwp0s20u2i2 to 255.255.255.255 port 67 interval 7
    may 24 09:33:08 AsusN56VZ dhclient[3624]: DHCPREQUEST on wwp0s20u2i2 to 255.255.255.255 port 67
    may 24 09:33:08 AsusN56VZ dhclient[3624]: DHCPOFFER from 10.X.X.X
    may 24 09:33:08 AsusN56VZ dhclient[3624]: DHCPACK from 10.X.X.X
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> address 10.X.X.X
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> plen 30 (255.255.255.252)
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> gateway 10.X.X.X
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> server identifier 10.X.X.X
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> lease time 518400
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> nameserver '194.X.X.X'
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> nameserver '194.X.X.X'
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (wwp0s20u2i2): DHCPv4 state changed unknown -> bound
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 5 of 5 (IPv4 Commit) started...
    may 24 09:33:08 AsusN56VZ avahi-daemon[1326]: Joining mDNS multicast group on interface wwp0s20u2i2.IPv4 with address 10.X.X.X.
    may 24 09:33:08 AsusN56VZ avahi-daemon[1326]: New relevant interface wwp0s20u2i2.IPv4 for mDNS.
    may 24 09:33:08 AsusN56VZ avahi-daemon[1326]: Registering new address record for 10.X.X.X on wwp0s20u2i2.IPv4.
    may 24 09:33:08 AsusN56VZ dhclient[3624]: bound to 10.X.X.X -- renewal in 252436 seconds.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 5 of 5 (IPv4 Commit) complete.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> NetworkManager state is now CONNECTED_LOCAL
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> NetworkManager state is now CONNECTED_GLOBAL
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> Policy set 'Orange' (wwp0s20u2i2) as default for IPv4 routing and DNS.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> Writing DNS information to /usr/bin/resolvconf
    may 24 09:33:09 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: successful, device activated.

  • Remote DP not installing, failed to connect with the remote Distribution Site

    Hello everyone, and thanks in advance. In attempting to install the DP role to a 2008 server, I get the following errors in the distmgr.log:
    DPID 16777369 - NAL Path ["Display=\\server-name\"]MSWNET:["SMS_SITE=CR1"]\\Server-Name\ , ServerName = SERVER-NAME, DPDrive = , IsMulticast = 0, PXE = 0, RemoveWDS
    = 0          
    SMS_DISTRIBUTION_MANAGER           
    4/8/2014 8:08:28 AM  
    8656 (0x21D0) Translated server name Server-Name to server.name\Server-Name.            SMS_DISTRIBUTION_MANAGER           
    4/8/2014 8:08:30 AM   8656 (0x21D0) CWmi::Connect() failed to connect to
    \\Server-Name\root\CIMv2. Error = 0x800706BA            SMS_DISTRIBUTION_MANAGER           
    4/8/2014 8:08:30 AM   8656 (0x21D0) STATMSG: ID=2391 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=CR-S-SCCM2012.cr.nws.noaa SITE=CR1 PID=8796 TID=8656 GMTDATE=Tue Apr 08 13:08:30.327 2014 ISTR0="["Display=\\Server-Name\"]MSWNET:["SMS_SITE=CR1"]\\Server-Name\"
    ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\Server-Name\"]MSWNET:["SMS_SITE=CR1"]\\Server-Name\"
    SMS_DISTRIBUTION_MANAGER            4/8/2014 8:08:30 AM            8656 (0x21D0)
    DPConnection::ConnectWMI() - Failed to connect to  SERVER-NAME.  SMS_DISTRIBUTION_MANAGER            4/8/2014 8:08:30 AM     
    8656 (0x21D0) Failed to install DP files on the remote DP. Error code = 1722 SMS_DISTRIBUTION_MANAGER            4/8/2014 8:08:30 AM        8656
    (0x21D0) STATMSG: ID=2370 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=CR-S-SCCM2012.xxx SITE=CR1 PID=8796 TID=8656 GMTDATE=Tue Apr 08 13:08:30.328 2014 ISTR0="["Display=\\Server-Name\"]MSWNET:["SMS_SITE=CR1"]\\Server-Name\"
    ISTR1="SERVER-NAME" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\Server-Name\"]MSWNET:["SMS_SITE=CR1"]\\Server-Name\"    
    SMS_DISTRIBUTION_MANAGER            4/8/2014 8:08:30 AM   8656 (0x21D0) Will try again after 20 minutes ...         SMS_DISTRIBUTION_MANAGER           
    4/8/2014 8:08:30 AM   8656 (0x21D0)
     I understand that 0x800706BA is RPC server unavailable, but I don't know how to fix it. I have done the following:
    Ensured the SCCM server account is a local admin on the remote server
    Ensured the Fire Wall service is not running on remote server
    Tested with wmimgmt.msc and wbemtest, which worked fine.
    Telneted on port 135 from site to server, which worked fine.
    IIS is installed, basic authentication...
    I am at a loss. Any ideas?
    Ashley!

    Hi Ashley,
    You can use Network Monitor and run it on the remote DP at the time ConfigMgr is attempting to install the DP role to capture more information on what may be causing the issue.
    Here is the download link to NetMon -
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    And here are some how to's on using NetMon just in case:
    http://support.microsoft.com/kb/812953/en-us
    http://blogs.technet.com/b/netmon/p/usagevideos.aspx
    Best of Luck,
    -Matt

  • Can connect with AE but fail on connecting with internet

    For some reasons I needed to re-conflict my AE and changed the wireless name. 2 of my Mac computer and my iTouch could connect with no problem. But my PC (XP2) could connect with this AE but failed on internet with error message "limited or not connectivity".
    Had to Restore my PC one day back (using the System Restore), reset my AE to previous name. Now everything is ok ... what's the reason behind ???
    Thank you

    I finally get the answer :-
    The XP only works for WEP 128bit with 13 characters password and not 5 characters

  • Canon 5d mark iii camera raw files with CS3

    Hi, I recently bought a Canon 5d mark iii camera and am having difficulty viewing the raw files on my Mac. The Mac operating software is 10.5.8 and the mac doesnt have intel. Photoshop software is CS3. I have looked at various plug ins but am struggling to find one that will work. Is there no option to me other than buying a new laptop with the latest photoshop or is there a workaround?  Thanks in advance for your help, Mike

    Here's the bottom line:
    You will never be able to open the image files from your Canon 5d mark III directly in CS3, because that camera model was first supported in Camera Raw 6.7 (which only works with CS5) and 7.1 which only works with CS6.
    However, you can download the free Adobe DNG Converter 7.1 and convert your Canon raw files to raw DNGs that you can open with any version of ACR starting with ACR 2.4, which takes you all the way back to CS1.  Therefore, you'll be able to open them in CS3 with no problem.
    Get the latest version of the Adobe DNG Converter, it is a stand-alone application that is not tied to whatever version of Photoshop you happen to use.  The current version is 7.1 and there's also a beta version 7.2RC1.
    Yes, if you can afford a Canon 5D Mark III, you can afford to upgrade from CS3 to CS6 for very little money ($199 for a perpetual license) if you act fast.  CS3 will be out of the upgrade loop in late December or so.
    I'm one of the many to whom the prospect of buying into Adobe's subscription mode and end up paying the Adobe tribute every month for life seems nothing less than repulsive.
    With that camera (a rich man's camera) is silly to be using a laptop (a beggar's machine).  Get a decent desktop Mac or PC already! 

  • Why is it suddenly impossible to import raw files from my canon 1ds mark III? I work with a mac 5. Nothing has been changed in the settings...

    I've been working for 2 years with Lightroom and importing pictures from my canon 1ds mark III
    Suddenly it doesn't work. Can somebody explain this or help me to change something
    so I can import my photos???

    import raw file default wrote:
    When Im trying to import photos Lightroom says it not all import results are possible.
    As DJ suggests, that's probably not the exact wording. Can we have that, please?
    Still need your OS and Lightroom version too.

  • Will Canon 5d Mark III Raw files work with Lightroom 3

    I have just tried to upload Raw files from a Canon 5d Mark III to Lightroom 3.  The file were not recognised.  I believe there were some update issues but my Lightroom 3 is updated.  Do I need to get Lightroom 4?  I need to know urgently as I have a shoot tomorrow and will go back to my Mrk II if I can't get an update for Lightroom 3.
    Message title was edited by: Brett N

    LR3 DOES NOT support Canon 5D3, 1Dx, Nikon D800 or Nikon D4.
    Newer cameras wont work in it, and require LR4 for RAW processing (Tethering in LR4 STILL is not supported)
    However,
    LR4 is massively buggy, and slow to a point where it is practically unuseable for anything other than a handful of images to edit.
    Also, LR4 will not tether to the new cameras (for that, try ANY of the competing professional software, Aperture, Capture One - They work just fine)
    You can, convert your 5D3 files to DMG, and then open them in LR3 that way, or you can get LR4 and deal with it's massively awful slow issues that Adobe has still not resolved 5.5 months after launch, or you can use other software.
    Those are your options.

  • Network Manager fails to connect with Sierra Wireless 3G/4G modem

    Hi,
    I have three Asus Laptops running with Arch (Asus N56VZ, Asus F3JC, Asus UL80VS). All laptops work with Cinnamon Desktop. Everything works fine except 3G Modem in Network Manager. I have two USB modems: Sierra Wireless AirCard 310U and Sierra Wireless AirCard 320U.
    Modems had worked fine in end of year 2012, when NetworkManager version was 0.9.6.4 and ModemManager 0.6.0.0. After update (NM >0.8.X.X, MM >0.7.X. - when the ModemManager.service appeared) until now, I can't connect to the internet on all Asus laptops. Since 2013 I have to use wvdial, because in wvdial modems works fine. It is Arch problem, because in Linux Mint 15 I can connect with NetworkManager.
    Sierra AirCard 310U - When I'm connecting to the internet, modem reboots itself.
    Sierra AirCard 320U - When I'm connecting to the internet, Network Manager can't obtain DHCP address.
    I would be grateful for any help.
    Sierra Wireless AirCard 310U (USB 3G Modem) log:
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> Activation (ttyUSB2) starting connection 'Orange PL'
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled...
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started...
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete.
    aug 22 13:41:35 AsusN56VZ ModemManager[308]: <info> Simple connect started...
    aug 22 13:41:35 AsusN56VZ ModemManager[308]: <info> Simple connect state (3/8): Enable
    aug 22 13:41:35 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
    aug 22 13:41:35 AsusN56VZ ModemManager[308]: <warn> (ttyUSB2): port attributes not fully set
    aug 22 13:41:38 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
    aug 22 13:41:38 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
    aug 22 13:41:38 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '0', MNC: '0', Location area code: '4FB9', Cell ID: '9C65539')
    aug 22 13:41:39 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '260', MNC: '3', Location area code: '4FB9', Cell ID: '9C65539')
    aug 22 13:41:40 AsusN56VZ kernel: usb 3-2: USB disconnect, device number 3
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB1: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB1: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB1: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: mm_serial_port_close: assertion `priv->open_count > 0' failed
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> registered)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: <info> Simple connect state (4/8): Wait to get fully enabled
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: <info> Simple connect state (5/8): Register
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: <info> (tty/ttyUSB2): released by modem /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: <info> Simple connect state (6/8): Bearer
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB1: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
    aug 22 13:41:40 AsusN56VZ kernel: sierra 3-2:1.0: device disconnected
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
    aug 22 13:41:40 AsusN56VZ kernel: sierra 3-2:1.1: device disconnected
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
    aug 22 13:41:40 AsusN56VZ kernel: sierra 3-2:1.3: device disconnected
    aug 22 13:41:40 AsusN56VZ kernel: sierra_net 3-2:1.7 wwp0s20u2i7: unregister 'sierra_net' usb-0000:00:14.0-2, Sierra Wireless USB-to-WWAN Modem
    aug 22 13:41:40 AsusN56VZ kernel: ModemManager[308]: segfault at 28 ip 0000000000433350 sp 00007ffff409e088 error 4 in ModemManager[400000+e0000]
    aug 22 13:41:40 AsusN56VZ systemd[1]: ModemManager.service: main process exited, code=dumped, status=11/SEGV
    aug 22 13:41:40 AsusN56VZ systemd[1]: Unit ModemManager.service entered failed state.
    aug 22 13:41:40 AsusN56VZ NetworkManager[309]: <info> ModemManager disappeared from bus
    aug 22 13:41:40 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2): device state change: prepare -> unmanaged (reason 'removed') [40 10 36]
    aug 22 13:41:40 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2): deactivating device (reason 'removed') [36]
    aug 22 13:41:40 AsusN56VZ laptop-mode[2414]: Laptop mode
    aug 22 13:41:40 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2): cleaning up...
    aug 22 13:41:40 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2): taking down device.
    aug 22 13:41:40 AsusN56VZ laptop-mode[2415]: enabled, not active
    aug 22 13:41:40 AsusN56VZ systemd-coredump[2336]: Process 308 (ModemManager) dumped core.
    aug 22 13:41:40 AsusN56VZ systemd[1]: Starting Modem Manager...
    aug 22 13:41:40 AsusN56VZ systemd[1]: ModemManager.service holdoff time over, scheduling restart.
    aug 22 13:41:40 AsusN56VZ systemd[1]: Stopping Modem Manager...
    aug 22 13:41:40 AsusN56VZ systemd[1]: Starting Modem Manager...
    aug 22 13:41:43 AsusN56VZ kernel: sierra_net 3-2:1.7 (unregistered net_device): usb_control_msg failed, status -19
    Sierra Wireless AirCard 320U (3G/4G Modem) log:
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) starting connection 'Orange PL'
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 1 of 5 (Device Prepare) scheduled...
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 1 of 5 (Device Prepare) started...
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 1 of 5 (Device Prepare) complete.
    aug 22 13:48:02 AsusN56VZ ModemManager[314]: <info> Simple connect started...
    aug 22 13:48:02 AsusN56VZ ModemManager[314]: <info> Simple connect state (3/8): Enable
    aug 22 13:48:02 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: state changed (disabled -> enabling)
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
    aug 22 13:48:02 AsusN56VZ ModemManager[314]: <warn> (ttyUSB3): port attributes not fully set
    aug 22 13:48:02 AsusN56VZ ModemManager[314]: <warn> (ttyUSB4): port attributes not fully set
    aug 22 13:48:05 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: 3GPP Registration state changed (unknown -> registering)
    aug 22 13:48:05 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: 3GPP Registration state changed (registering -> home)
    aug 22 13:48:05 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: 3GPP location updated (MCC: '0', MNC: '0', Location area code: '4FB9', Cell ID: '9C65539')
    aug 22 13:48:05 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: 3GPP location updated (MCC: '260', MNC: '3', Location area code: '4FB9', Cell ID: '9C65539')
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: state changed (enabling -> registered)
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Simple connect state (4/8): Wait to get fully enabled
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Simple connect state (5/8): Register
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Simple connect state (6/8): Bearer
    aug 22 13:48:06 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3) modem state changed, 'enabling' --> 'registered' (reason: user-requested)
    aug 22 13:48:06 AsusN56VZ NetworkManager[315]: <info> WWAN now enabled by management service
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Simple connect state (7/8): Connect
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: state changed (registered -> connecting)
    aug 22 13:48:06 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3) modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: signal quality updated (40)
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: access technology changed (unknown -> hsdpa, hsupa)
    aug 22 13:48:09 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: state changed (connecting -> connected)
    aug 22 13:48:09 AsusN56VZ ModemManager[314]: <info> Simple connect state (8/8): All done
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 2 of 5 (Device Configure) scheduled...
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 2 of 5 (Device Configure) starting...
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): device state change: prepare -> config (reason 'none') [40 50 0]
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): bringing up device.
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 2 of 5 (Device Configure) successful.
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 3 of 5 (IP Configure Start) scheduled.
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 2 of 5 (Device Configure) complete.
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 3 of 5 (IP Configure Start) started...
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): device state change: config -> ip-config (reason 'none') [50 70 0]
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (wwp0s20u2i7) Beginning DHCPv4 transaction (timeout in 45 seconds)
    aug 22 13:48:09 AsusN56VZ kernel: IPv6: ADDRCONF(NETDEV_UP): wwp0s20u2i7: link is not ready
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> dhclient started with pid 2351
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 3 of 5 (IP Configure Start) complete.
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv6 Configure Timeout) started...
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: Internet Systems Consortium DHCP Client 4.2.5-P1
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: Copyright 2004-2013 Internet Systems Consortium.
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: All rights reserved.
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: For info, please visit https://www.isc.org/software/dhcp/
    aug 22 13:48:09 AsusN56VZ dhclient[2351]:
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> (wwp0s20u2i7): DHCPv4 state changed nbi -> preinit
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: Listening on LPF/wwp0s20u2i7/8e:1d:fe:e0:02:07
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: Sending on LPF/wwp0s20u2i7/8e:1d:fe:e0:02:07
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: Sending on Socket/fallback
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 5
    aug 22 13:48:14 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 5
    aug 22 13:48:19 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 7
    aug 22 13:48:26 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 7
    aug 22 13:48:33 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 7
    aug 22 13:48:36 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: signal quality updated (40)
    aug 22 13:48:40 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 10
    aug 22 13:48:50 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 17
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <warn> (wwp0s20u2i7): DHCPv4 request timed out.
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> (wwp0s20u2i7): canceled DHCP transaction, DHCP client pid 2351
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv4 Configure Timeout) scheduled...
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv4 Configure Timeout) started...
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <warn> Activation (ttyUSB3) failed for connection 'Orange PL'
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv4 Configure Timeout) complete.
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): device state change: failed -> disconnected (reason 'none') [120 30 0]
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): deactivating device (reason 'none') [0]
    aug 22 13:48:54 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: state changed (connected -> disconnecting)
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3) modem state changed, 'connected' --> 'disconnecting' (reason: user-requested)
    Last edited by Shocker (2013-09-14 20:08:08)

    Shocker wrote:I don't think it's kernel problem, because Linux Mint 15 have kernel 3.8 and there is everything fine. Maybe systemd (Fedora & Arch have systemd, but Mint sysvinit..), maybe version of dhcpcd, I have no idea...
    To test, I downgraded my kernel
    ~ ᐅ uname -r
    3.9.5-301.fc19.x86_64.debug
    And now I see in messages
    Sep 15 09:46:17 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) starting connection 'Telstra'
    Sep 15 09:46:17 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Sep 15 09:46:17 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 1 of 5 (Device Prepare) scheduled...
    Sep 15 09:46:17 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 1 of 5 (Device Prepare) started...
    Sep 15 09:46:17 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 1 of 5 (Device Prepare) complete.
    Sep 15 09:46:17 localhost modem-manager[757]: <info> (ttyUSB2) opening serial port...
    Sep 15 09:46:17 localhost modem-manager[757]: <warn> (ttyUSB2): port attributes not fully set
    Sep 15 09:46:17 localhost modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (disabled -> enabling)
    Sep 15 09:46:17 localhost dbus-daemon[618]: modem-manager[757]: <info> (ttyUSB2) opening serial port...
    Sep 15 09:46:17 localhost dbus-daemon[618]: modem-manager[757]: <warn> (ttyUSB2): port attributes not fully set
    Sep 15 09:46:17 localhost dbus-daemon[618]: modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (disabled -> enabling)
    Sep 15 09:46:18 localhost dbus-daemon[618]: modem-manager[757]: <info> (ttyUSB2): using PDU mode for SMS
    Sep 15 09:46:18 localhost modem-manager[757]: <info> (ttyUSB2): using PDU mode for SMS
    Sep 15 09:46:18 localhost dbus-daemon[618]: modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (enabling -> enabled)
    Sep 15 09:46:18 localhost modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (enabling -> enabled)
    Sep 15 09:46:18 localhost NetworkManager[724]: <info> WWAN now enabled by management service
    Sep 15 09:46:19 localhost dbus-daemon[618]: modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (enabled -> registered)
    Sep 15 09:46:19 localhost modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (enabled -> registered)
    Sep 15 09:46:19 localhost dbus-daemon[618]: modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (registered -> connecting)
    Sep 15 09:46:19 localhost modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (registered -> connecting)
    Sep 15 09:46:19 localhost dbus-daemon[618]: modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (connecting -> connected)
    Sep 15 09:46:19 localhost modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (connecting -> connected)
    Sep 15 09:46:19 localhost kernel: [ 5056.773068] IPv6: ADDRCONF(NETDEV_UP): wwp0s29u1u1i7: link is not ready
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 2 of 5 (Device Configure) scheduled...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 2 of 5 (Device Configure) starting...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): device state change: prepare -> config (reason 'none') [40 50 0]
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): bringing up device.
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 2 of 5 (Device Configure) successful.
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 2 of 5 (Device Configure) complete.
    Sep 15 09:46:19 localhost avahi-daemon[607]: Registering new address record for fe80::c0c3:a2ff:fe4a:207 on wwp0s29u1u1i7.*.
    Sep 15 09:46:19 localhost kernel: [ 5056.876750] IPv6: ADDRCONF(NETDEV_CHANGE): wwp0s29u1u1i7: link becomes ready
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 3 of 5 (IP Configure Start) scheduled.
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 3 of 5 (IP Configure Start) started...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): device state change: config -> ip-config (reason 'none') [50 70 0]
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Beginning DHCPv4 transaction (timeout in 45 seconds)
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> dhclient started with pid 10376
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 3 of 5 (IP Configure Start) complete.
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Sep 15 09:46:19 localhost dhclient[10376]: Internet Systems Consortium DHCP Client 4.2.5
    Sep 15 09:46:19 localhost dhclient[10376]: Copyright 2004-2013 Internet Systems Consortium.
    Sep 15 09:46:19 localhost dhclient[10376]: All rights reserved.
    Sep 15 09:46:19 localhost dhclient[10376]: For info, please visit https://www.isc.org/software/dhcp/
    Sep 15 09:46:19 localhost dhclient[10376]:
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): DHCPv4 state changed nbi -> preinit
    Sep 15 09:46:19 localhost dhclient[10376]: Listening on LPF/wwp0s29u1u1i7/c2:c3:a2:4a:02:07
    Sep 15 09:46:19 localhost dhclient[10376]: Sending on LPF/wwp0s29u1u1i7/c2:c3:a2:4a:02:07
    Sep 15 09:46:19 localhost dhclient[10376]: Sending on Socket/fallback
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPREQUEST on wwp0s29u1u1i7 to 255.255.255.255 port 67 (xid=0x6e8c90b2)
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPNAK from 10.102.67.253 (xid=0x6e8c90b2)
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): DHCPv4 state changed preinit -> expire
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPDISCOVER on wwp0s29u1u1i7 to 255.255.255.255 port 67 interval 6 (xid=0xae2cec8)
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPREQUEST on wwp0s29u1u1i7 to 255.255.255.255 port 67 (xid=0xae2cec8)
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPOFFER from 10.102.67.253
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): DHCPv4 state changed expire -> preinit
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPACK from 10.102.67.253 (xid=0xae2cec8)
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): DHCPv4 state changed preinit -> bound
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> address 10.102.67.12
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> prefix 24 (255.255.255.0)
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> gateway 10.102.67.12
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> nameserver '10.4.81.103'
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> nameserver '10.4.182.20'
    Sep 15 09:46:19 localhost NetworkManager[724]: nm_ip4_config_add_wins: assertion `wins > 0' failed
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> wins '0.0.0.0'
    Sep 15 09:46:19 localhost NetworkManager[724]: nm_ip4_config_add_wins: assertion `wins > 0' failed
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> wins '0.0.0.0'
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 5 of 5 (IPv4 Commit) started...
    Sep 15 09:46:19 localhost avahi-daemon[607]: Joining mDNS multicast group on interface wwp0s29u1u1i7.IPv4 with address 10.102.67.12.
    Sep 15 09:46:19 localhost avahi-daemon[607]: New relevant interface wwp0s29u1u1i7.IPv4 for mDNS.
    Sep 15 09:46:19 localhost avahi-daemon[607]: Registering new address record for 10.102.67.12 on wwp0s29u1u1i7.IPv4.
    Sep 15 09:46:19 localhost dhclient[10376]: bound to 10.102.67.12 -- renewal in 97473 seconds.
    Sep 15 09:46:20 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
    Sep 15 09:46:20 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 5 of 5 (IPv4 Commit) complete.
    Sep 15 09:46:20 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): device state change: secondaries -> activated (reason 'none') [90 100 0]
    Sep 15 09:46:20 localhost NetworkManager[724]: <info> Policy set 'Telstra' (wwp0s29u1u1i7) as default for IPv4 routing and DNS.
    Sep 15 09:46:20 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) successful, device activated.
    I'm going to ask on #fedora and see how i can best diagnose what's going on. At least I now have it working, albeit on an older kernel.
    Last edited by qnm (2013-09-14 23:48:05)

Maybe you are looking for

  • Prompting user for input for each row in the report

    Is it possible to have a user entered field for each row in a report ? ie. have a report with empolyee number, employee name, title, salary, and comment. Select of of these columns from the SQL query except for the comment, and then when the report i

  • What are the differences between oracle adf 10g and adf 11g

    Could you please let me know what are the diff b/w oracle adf 10g and 11g, i tried in many user guides but i could not find it. Thanks in advance, Poli Reddy P

  • MRTG Out Greater than In

    Hello Net Pros, I have configured a MRTG system to give me the traffic analysis of my AS5350 Gateway's serial WAN Interface. Now in my graph the "Current In" value displayed is always smaller than the "Current Out". The same is for "Average" and "Max

  • Error occurs during configuration of ESR in CE

    I'm doing the "Configuration of ESR in CE" senario in the NWA. In the final step: Importing XI content following error happened: Error: Password cannot be null or empty and I found following exception in log: importContentInput <importContentInput> <

  • Website Storage Settings Panel

    I have been changing the settings for the website storage and global storage settings panel. Now some things like flash games and some video don't work. I have tried to change the settings back but can't get them to take. I tried to uninstall and rei