Canon 7d mark ii Vs 5d mark iii purchase

Hi, I was hoping for advice on which camera would be the most practical for me to aquire, I am nothing more than a amateur who has a serious interest in photography and i know the answer is based off what I will be using the body for; I work in a photography gallery in Bar Harbor, Maine not as a photographer as an employee, that being said Its wonderful terrain and I enjoy landscape photography a great deal, that being said its Maine and its not as practical in the winter in which I will be shooting sports at indoor locations. Its not so much the price difference as finding the best balance for both also i am apprehensive that the 5d mark iv may come out soon. not saying the 5d iii stops working but it might be worth holding off a month or 3. Thats my dilema any advice at all is appreciated! I would like to add for the next 6 months my focus is primarily on indoor sports.
Thanks, Kyle

Skirball wrote:
I think the new 16- 35 f/4 can match (and beat) anything the 10-18 or 10-22 can do. Except IS I guess. Having more options for lenses isn’t the same has having more lenses you need.
The 16-35 f/4 has IS. And contrary to some pre-launch reports, it does have a switch to turn the IS on and off.
Bob
Boston, Massachusetts USA

Similar Messages

Unused stored procedure parameters marked with a check mark in crystal reports

Post Author: epowers0213
CA Forum: General
Hello,
I have some Crystal Reports that currently use stored procedures as their datasources (I am in the process of modifying them to use datasets instead). Some of the original reports have check marks next to stored procedure parameters which I cannot find as being used anywhere in the report. Is this a legitimate possibility? (Some of them do not have check marks, however, so it is not consistent.)
More Info: I am using Crystal Reports within Visual Studio 2005. I have looked through each report in every way I can think of to find if a parameter field is being used anywhere - I have checked all formula fields, the formatting formulas for sections and individual fields, the record and group selection formulas and the grouping and sorting experts, along with any subreports (although some of them have no subreports).
(I have read on other forums that exporting a report definition file is another way to look for where fields or parameters are being used, but this does not appear possible within Visual Studio 2005.)
In some cases, I have gone ahead and replaced the stored procedure datasource location with a dataset (generated based on the same stored procedure). When I do this, Crystal automatically deletes the stored procedure parameters from the report, and I have still been able to run the modified report successfully - at least it looks ok and nothing is complaining. So is it possible that these parameters were actually not being used anywhere on the report although they were marked with a check mark?
Any help would be greatly appreciated! I want to make sure I am not changing the function of these reports somehow without knowing it...
Thank you!

Are you referencing another database that Crystal can't see? Also, you can try and copy the SQL to a command object in Crystal to see if it behaves differently there.

There is a question mark on my keynote mark so i can't open it

Hi, two days ago i update my software with os x Yosemite, so i update keynote also, but when I update it there was two keynote in my launchpad so I deleted one. Today I turned on my iMac and there was a question mark on the keynote mark so i can't open it. What I have to do? Sorry for my bad english but I'm an Italian boy

Hi, taro99.
Thank you for visiting Apple Support Communities.
I would recommend downloading Keynote again via your past purchases. Here are the steps that will walk you through downloading it again from the Mac App Store.
Download past purchases
http://support.apple.com/kb/ht2519
Cheers,
Jason H.

Mail Rules missing "mark as unread" and "mark as unflagged"

I'm adding some new rules in Mac Mail and just noticed that there is no option to "mark as unread" in my list. My friend has it coming up, but it isn't there for me.
When I click to add a new rule, the drop-down for Perform actions lists "delete", "mark as read" and "mark as flagged". I'm missing "mark as unread" and "mark as unflagged".
Why would I be missing those options?
Thanks,
Morton++

Mail rules doesn't offer these options which is why you don't have them. Your friend must be mistaken. and anyway since the rules are only applied to new messages there is no point in having the option to mark them as unread - they are unread already. You can add a rule to unflag messages using apple script but if I'm not mistaken all new messages are unflagged by default too so there is no point for this one either.

Every tune in my library is marked with an explanation mark and produces a report " The song ..... could not be used because the original file could not be found. Would you like to locate it?" Probably yes - but how ?

Every song in my library, both purchased or downloaded from a CD, is marked with an exclamation mark and produces a report " The song ......... could not be used because the original file could not be found. Would you like to locate it ?" Well, probably yes - but how ? and why necessary ? HELP !

It would help to have more background about your iTunes collection such as if you keep it on an external drive, or if you have moved or renamed anything recently. iTunes is very sensitive to you renaming or moving files or folders involved with your media. iTunes only keeps a reference to where a media file is located and then goes to look for it when you try to play it. If you have changed things since it was added to itunes then it's like me sending you to look for a friend in my addressbook but that friend has moved.
The other possibility is your computer is starting to lose files. Again, the computer uses a reference database to tell it where on the drive to look for a file. If that database gets corrupt then it starts losing files. Use Dsk Utility's first aid to verify your hard drive.

Teleconverters (Extenders) for Canon EF 75-300mm 4-5.6 III suggestions ?

I have a Canon EF 75-300mm 4-5.6 III Zoom and would like to give it more power. I can't afford a bigger zoom so does anybody have any suggestions for a Teleconverter (Extender) , say 1.4X or 2X I could use to add on to the lens. There are a lot of brands out there (Canon, Bowers, etc.) and I need something that won't "break the bank" .....Thanks !

That's a mid grade consumer lens which won't go well with a TC. ANY TC will hurt or kill the AF speed & soften the images when shooting stills & I doubt it could even capture action. Start researching better & more suitable lenses to match what you need for those longer shots & put that money into the pile as you learn.
"A skill is developed through constant practice with a passion to improve, not bought."

HT1349 hi good day im Mark Alino from the philippines i purchase iphone 5s 32g gold from the istore here in ayala cebu city philippines last december 13th friday. And its been 2days from the date i purchase that phone i returned it from store due to a big

Good day, i have concerns and problems, questions that i want an answer hope you can help me guys.. im Mark Alino from the philippines i purchase iphone 5s 32g gold color here at ayala istore cebu, city philippines since the date i purchase the phone i returned it due to a big hairline scratch in the middle of the screen and on the left side and i was so dissapointed. Afterwards the store tell me that i have to wait 15working days just to replace the unit and its been 2 weeks from now and i diddnt hear any feedback from them knowing the fact that i paid for thatb phone and its very expensive 40,000 pesos. please help me guys.. to solve my problems i think i have the right to complain or refund if they cannot gave the unit as soon as possible this is the contact no. from istore... please if someone read this pls help me im so down and please apple help me.
<Phone Number Edited by Host>

There is no one from Apple here. We are users like you.
The only legitimate iphone sellers in the Phil are the carriers. You probably bought a gray market phone that was imported from another country. Thus the warranty is not valid in the Phil. The store is probably trying to replace the phone by sending it back to the country they bought it from.
There is nothing Apple or anyone can do here. You will have to wait until the store solves your problem. If they do not, demand a refund. Good luck.

HT202063 Canon 1D mark 2 wont tether to aperture purchased on 2/22/12. running 10.8

I just purchased aperture 3, after a LOT of handwringing, expecting my canon 1D mark 2 to tether to the computer per http://support.apple.com/kb/HT4176
what am i doing wrong? other than wishing this would work properly.

Uninstall Genieo:
http://www.thesafemac.com/arg-genieo/
See if that makes a difference.
Ciao.
DawnHerbie wrote:
Also is Safeboot ok to use?
Yes, it will do no harm, but it is meant for trouble shooting and you should not have to use it all the time.
Message was edited by: OGELTHORPE

How can I deal with negative marking in a quiz marking scheme?

I wonder if anyone can help me with a problem I have in developing the 'code' for a marking scheme for an exam in Captivate 8. I would be very grateful for pointers towards a viable solution. At the moment I am just thrashing around.
My background is in C++ and I think part of my problem is in trying to find analogues of functions I would use in that environment. My experience with Captivate is limited to developing fairly simple training courses but now I need to put an existing exam on line, maintaining its relatively complicated marking scheme, which is as follows:
The paper is multiple choice, each question having four statements, one (or at the most two) of which is true. A completely correct answer gets 4 marks so where there are two correct statements each gets 2 marks. So far, so easy.
The difficulty arises from an element of negative marking. If 3 or more statements are selected, the score is 0 marks. If there is a single correct statement and it and an incorrect statement are selected, the score is 2 marks. If there are 2 correct statements and one of them is selected, the score is 2 marks. If an incorrect statement is selected as well, the score is 1 mark.
I had assumed I could use conditional logic and user variables on a slide-by-slide basis to provide a score value and then assign it to the appropriate system quiz variable, but it seems I can't assign values to variables in a quiz slide. That would have been too easy...
So, can anybody advise me on an approach that keeps the advantages of using the quiz framework, including the use of the Review function?
Any help very gratefully received.

If you use SCORM 1.2 for reporting, negative scores will be converted to zero, because it doesn't allow negative score.
If you want to keep to Review functionality, you need to stay with the default question slides. There are some tweaking possibilities but changing the score is not one of them.
Question Question Slides in Captivate - Captivate blog
Question Question Slides - Part 2 - Captivate blog
I think the only possible way is to use JS, but then you'll not be able to keep the functionality of the Question slides, you are in custom question slides. Plenty of examples of custom questions can be found on my blog as well.

"Excel found unreadable content in" The Problem is text in a clob exported to excel uses - Left single quotation mark -Right double quotation mark.

Here are the ASCII char being used.
145 221 91 10010001 ‘  ‘ Left single quotation mark
146 222 92 10010010 ’  ’ Right single quotation mark
147 223 93 10010011 “  “ Left double quotation mark
148 224 94 10010100 ”  ” Right double quotation mark
149 225 95 10010101 •  • Bullet
150 226 96 10010110 –  – En dash --
The default CHAR NOW is a black diamond with ? in middle in stead of 'Right double quoation mark' and others.
The Text used is copied from documents user's get
so someone is putting in I think what is called ALT ascii. This data has been used for years
some updates where put in the system, I don't know details.
The following error started you click YES and the XLS has alot of data missing not just the CLOB.
Excel found unreadable content in ‘file-name’.
Do you want to recover the contents of this workbook?
If you trust the source of this workbook click yes.
I can copy the text then load it into the a column in a xls.
I am exporting the spreadsheet from TOAD it wasn't updated so
it has to be with the EXCEL. I tried changing the ENCODING in EXCEL but that
didn't work.

I'm not familiar with TOAD, could you please let us know how did you export data from TOAD to Excel?
Based on your description, it should be an encoding problem, have you tried to change the encoding as 'UTF-8' ?
Wind Zhang
TechNet Community Support

Laserjet CM1415fn CMFP Black screen-question mark on screen-excalmation mark and dot flashing

Hello everybody
I've got a laserjet pro CM1415fn color MFP which seems to get power, starts up but suddenly the screen gets black and only the question mark is shown.
Also, above the screen there are two indicators: An exclamation mark and a dot to its left, both of them blinking.
Can anyone tell me what's the problem and how to solve it?
Thanks in advance
Jim

hello,
I got the same problem. could you fix it?

Upside down question mark and exclamation mark on touch keypad. 9800 torch

how do i change question mark and exclamation mark so they are not upside down. tech support at orange business were hopeless. simply asked around in the office ending up suggesting they replace the handset??

do you mean your question mark looks like this : ¿ instead of this : ?
and your exclamation mark looks like this : ¡ instead of this : !
can you explain how you type those characters ? Is there anything written in the top right corner of your device ? like ES or EN ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Marker List: Batch Export Marker Regions MISSING

Hi guys,
I am running Audition 3.0.1 on Windows 7 x64 and just went to use the 'Batch Export Marker Regions' function in the 'Markers' panel to save any my marked regions to seperate files.
However, the icon for this seems to be missing completely.
Any ideas what is wrong and how I might get the icon back?
Here's a grab of the panel. As you can see, the icon that should be bottom right just isn't there!
Many thanks in advance,
James.

Hi guys,
I have solved the problem! Although I now realise that I have totally missed how this all works.. Doh.
Basically I was expecting to see the batch export option icon in the 'Marker List' when in 'Multitrack' mode. I now realise that it is only available in 'Edit' mode.
Sorry for wasting your time although this might help out others who make the same mistake as me. I assumed I would be able to do this from Multitrack mode as I find it easy to edit a large VO take in multitrack and then apply effects to the whole track easily. It would be nice to be able to batch export from this view based on the current track settings, but it's not too bad.
Also, for anyone who is wondering you can take a multitrack session down into edit mode with ALL markers in place by going to File->Export->Audio Mixdown. From here it's then a simple case to export all markers out based on your preferences.
So pleased to have solved this one.
Thanks for all responses.
James.

Can't mark-in, 1.00, mark out on primary storyline. Help!

I am sure I am doing something wrong.... On the primary storyline, I have an 8 second clip. I want to place another clip 3:00 after the start of my primary, let it run for 2:00, then come back to the original clip.
I would normally go to my inpoint, hit "I" to mark in, hit "+3:00/enter", then hit "O" to mark out. Then select my clip, and overwrite it. Boom. Done.
Unfortunately, I can't get X to work this way. If I go to that same 8 second primary-storyline clip, go to my inpoint, hit "I" - it then selects everything from my inpoint to the end of the primary clip. Then if I hit "+3:00/enter", it selects 3 seconds of the clip AFTER the endpoint of my primary storyline clip. This is not what I want to do. Is there no way to do a simple three-point edit in this program?

Hi Tom. I know that +3.00 means from the playhead position, but the program still doesn't work the way you stated - unless I've got something in my settings messed up
Tom Wolsky wrote:
You have to enter an Out point. If the playhead is at the point you want to mark the In enter +200 (or plus two period) to move the playhead forward two seconds. Press O. Press D.
Marking in on the timeline sets your mark-in point. I agree with you. Here's an example. I have a slug that I want to drop something in. Move the playhead to where I want to start my edit:
Now I select "mark-in" (or "I"). This happens:
The program selects from the inpoint to the end of the clip - automatically. Without me selecting an outpoint. It decided on its own that I wanted to set the outpoint as the end of that clip. I didn't.
then type "+3.", this is what happens:
The timecode window changes to this:
hit enter, and this happens:
It moves the range outpoint three seconds beyond the end of the clip it automatically selected in the previous step.
The only way I have found to do what I want to do requires extra keystrokes. As an editor, this is wasted time.
Move your playhead. Select your in-point. We still get this happening - which is not what I want:
Now I go and click on the timecode window, which now changes to this:
NOW if I type in "+3./enter" it does exactly what I want: Moves the playhead ahead 3 seconds, and I can hit "O" and set an outpoint.
How can I get the program to default to this behavior without having to waste time clicking in the timecode window? Is it possible?

Refurbished from canon,with 90 day limited warrenty.Has anyone purchased.Any thoughts on this?

Hello..Just wondering if anyone here has bought refurbished product,and your input on the subject. There is some good holiday prices on some of there cameras,but refurbished..From Canon directly

Like a previous poster said, other than the white box, there's not much different. If the full-retail version of a lens comes with a hood and case, so does the refurbished version of the same lens when you buy from the Canon store. Same goes with the lens hood.
Those holiday prices are pretty good. The discounts happen off and on through out the year. I think they come in 15%-25% varieties. But the inventory doesn't last very long. If you follow blogs, some of them will relay the announcement of a discount's start. Of the blogs I follow, http://www.the-digital-picture.com/News/ normally makes the first announcement. You can add it to your RSS reader with http://www.the-digital-picture.com/News-RSS.aspx.
You might find this thread interesting: http://forums.usa.canon.com/t5/Lenses/Refurbished-quot-L-quot-Are-they-worth-it/m-p/4867#U4867

Canon 7d mark ii Vs 5d mark iii purchase

Similar Messages

Maybe you are looking for