Canon A-DEP not recognised in LR

Has anyone else noticed this? Select an image file shot with a Canon DSLR in A-DEP mode in the Library module, and the Exposure Program field vanishes from the EXIF Metadata panel. Other Exposure Programs show up much as you'd expect (M= Manual, Av = Aperture Priority, Tv = Shutter Priority, P = "Normal"), but A-DEP just doesn't show.
I don't use A-DEP much, and never use any of the others on the Canon dial, so maybe I'll just have to live with the knowledge that A-DEP is represented in LR by the absence of the Exp Prog field, but wonder if there's a reason for this anomalous behaviour.
Jim
PS: Just checked and the same happens in Bridge. Am I missing something here?

What is your general work flow? Are you pulling the files directly from the camera? I was having an issue with my new 7D last night where Lightroom insists that it doesn't know what to do with the cr2 files when I was attempting to import them from the camera (Something it happily does with my T3 and has for ages)
However, if I manually dragged the RAW files to their holding directory on the drive myself, and then imported them to Lightroom, everything was just fine.

Similar Messages

Canon cr2 files not recognised in LR4.1

I have Lightroom 4.1 running on a MacBook Air with 10.8.1 OS
It is not recognising the files from my Canon 7D with v 2.00 firmware
The files are recognised however in Bridge v 6
Any solutions?

What is your general work flow? Are you pulling the files directly from the camera? I was having an issue with my new 7D last night where Lightroom insists that it doesn't know what to do with the cr2 files when I was attempting to import them from the camera (Something it happily does with my T3 and has for ages)
However, if I manually dragged the RAW files to their holding directory on the drive myself, and then imported them to Lightroom, everything was just fine.

Canon MP 620 not recognised since new airport extreme

I've been successfully using a Canon MP620 printer and scanner wirelessly for about six months but then my old Buffalo AirStation gave up the ghost and I replaced it with a new Airport Extreme. It was a joy to get something out of the box, plug it in and have everything work from the moment I switched it on. The only problem is the Canon has disappeared and I cannot get it to appear either wirelessly or as a USB device. I have tried just connecting it to one computer by a USB cable but it's just not being detected.
We have three MacBook Pro's in the family on airport, a MacPro and an old G4 that connect by cable, oh, and er...a Dell PC. We are running a mix of 10.5.8 and 10.6.1. The main MacBook Pro that was used originally to set up the wireless system is still on 10.5.8.
The Canon still has the same settings in it that it had before. I have downloaded the latest driver from Canon but when I get to the point where it scans for printers nothing comes up whether I set it to USB or Network.
I am so frustrated as it was working so well before.
Any ideas anyone?

Hello and welcome to Apple Discussions.
To add the MP620 on Mac OS X 10.5 as a networked wired or wireless printer, you need to select More Printers > Canon IJ Network. For Mac OS X 10.6, you add the network printer via the Default browser view. But there is every chance that the MP620 is not connected to your new Airport, so you will need to run the network setup tool again.
To configure the network settings in the printer, you will have to connect the MP620 to your Mac or PC via USB. This will let you open the Canon IJ Printer Utility, which lets you configure the network settings. Since this is a Mac forum, I will detail the Mac procedure.
With the printer connected via USB, open Print & Fax and select the MP620 in the list. If you haven't had the MP620 connected to this Mac previously via USB, then it may take a while for the printer to appear in this list. If it hasn't appeared after 30 seconds, then click + to add the printer. Select the MP620 shown as a USB device. At the point when you select to Add, you may be prompted that the printer is already installed. If so, just cancel the install. If not, continue the procedure.
With the USB printer queue selected, open the print queue and click the Utility icon. This will open the Canon IJ Printer Utility. This will show you the USB attached MP620. Select it and press the Network Settings button. This will open the Canon IJ Network Tool that will guide you through adding the MP620 to your new network.
Once the network setup process has completed, you can turn the MP620 off and disconnect the USB cable. Then when you turn the power back on, the printer should now be connected to your wireless network allowing you to add it as a network printer.
On 10.5, with Print & Fax open, click to Add and then select More Printers > Canon IJ Network.
On 10.6, open Print & Fax and click to Add. Select the Default browser view.
In both cases the MP620 should be visible, allowing you to select it and add it as a network printer.
Hopefully this gets you printing again. Please reply if you need more help.
Pahu

Canon MP600 Scanner not recognised

OSX 10.8.4 does not recognize my scanner in the Canon MP600 anymore plase advise why this is and how to correct it

Look in the HD/Library/Applications Support/Canon folder. That's where the driver for my Canon printer is located. If you install it for only the current user and not all users it might be in the Users/Home/LIbrary/Application Support/Canon folder.
For other files for the printer look in the HD/Library/Printers folder.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT

Canon MG6250 does not recognise Macbook, why?

When we bought the Canon MG6250 earlier this year we had installed and set up it up for Windows first as we mainly use it from a Windows PC.
I have now installed everything on the MacBook Pro also and wireless printing works fine, however the scanning process works only when initialised on the MacBook throught the scannint software.
When I select Scan on the MG6250 and want to select the laptop only the Windows shows up and not the MacBook.
Anyone any ideas of why this is?
Many thanks
Marcus

have you looked at this article:
http://support.apple.com/kb/TS3540
(Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart)

Canon Pixma MP610 - Not recognised

Just bought a Canon Pixma MP610 multifunction printer but despite loading the driver that came with it, my Macbook does not recognize it.
I downloaded the latest drivers from the Canon website - but still no joy. When I go into printers and faxes it does not even appear. Any suggestions ?

When you add a Canon inkjet printer queue there is no ability to browse for the printer driver via the Print Using menu. The driver software needs to see the printer on the end of the USB cable to work.
The usual procedure to add the printer is to run the driver software installer first without the printer being connected. Then once the installer has finished and you have restarted the Mac, you can connect the USB cable. When you do this the software often finds the Canon printer and automatically adds it to the printer list. If it doesn't automatically add straight away, you can try to add it via Print & Fax > Add. When you do this I have often found that the printer, after selecting the printer via the Default view, has already been added.
Before attempting to print, you should be adding the printer via Print & Fax. After selecting Add ( + ) the printer should appear in the Default view as a USB device. If after selecting the printer name, the Print Using menu does not automatically change to Canon IJ Printer, then something is wrong with the driver software and generally needs to be reinstalled. Following is my procedure to reinstall the Canon driver software.
1. Open System Preferences > Print & Fax. Highlight the Canon printer in the Printer list and click the minus ( - ) button. [Since your printer is not installed then you don't have to do this step]
2. Hold Control key and click in the empty Printers list. Click on Reset Printing System.
3. Close Print & Fax
4. Go to Library > Printers > Canon and delete the contents of the BJPrinter folder.
5. Go to Library > Receipts and delete the Canon driver package file, if one exists. The file name will show Canon MP610 693.pkg. If you are not using the MP210 on this machine, you can delete its package file if it is here also.
6. Go to Library > Preferences and delete the Canon folder.
7. Go to HD > Users > Shared > Canon and delete the BJPrinter folder.
8. Empty the Trash
9. Unplug the Canon USB cable and restart the Mac
10. Install the latest version of the Canon driver. Check the Canon web site to ensure you have the latest version.
11. Once the driver installation is complete, go to Applications > Utilities and open Disk Utility. Run the Repair Disk Permissions option.
12. Reconnect the Canon USB cable. Then open Print & Fax and see if the Canon printer is listed. If it is, try a test print.
13. If the printer is not listed, click the plus ( + ) button.
14. Select the Default view and select the Canon printer connected via the USB port. The Print Using menu should automatically change to Canon IJ Printer.
15. Click Add to add the printer.
PaHu

Plug-in for Canon iPF8400 not recognised in Photoshop CC 2014. Lost Topaz and Nik Software as well.

I have just updated to Photoshop CC 2014 and lost the plug-ins for Canon iPF8400 printer, Topaz Labs, and Nik Software. I had been asked if I wanted to migrate plug-ins and said yes. I have dropped the plug-ins into the Photoshop plug in folder but they are note being recognised.

Similar problems here with Topaz Labs plug-ins.
Unfortunately I have now uninstalled Photoshop CC so the option of copying them into Photoshop CC 2014 is no longer viable and Photoshop CC 2014 simply does not recognise them.
Waiting for response from Topaz labs

I am trying to connect my iPad to a canon MX436 printer an my iPad is not recognising the air printer! How do I fix this?

I am trying to connect my iPad to a canon printer and the iPad is not recognising the printer? What do I do?

There are troubleshooting suggestions at the bottom of this article:
AirPrint basics

Canon cameras not recognised in iPhoto 11

Hi, since upgrading to iPhoto 11 my canon cameras (Powershot A3000 and eos 350D) are not recognised. The eos shows 'busy' on the screen but does not show up in iPhoto, and the powershot does nothing. The cameras are not showing in System Profiler of Image Capture either, and do not mount onto the desktop (they have never done that).
I have checked the firmware of the eos and it looks as if it has the latest version.
Does anyone have any ideas what to do next?
Many thanks
Lisa

I've been away on holiday so it's been a while since I've bothered to try & sort this... however, today I looked through the related software updates for Canon EOS 350D (http://software.canon-europe.com/products/0010192.asp) and downloaded 2 updates just for the **** of it (http://software.canon-europe.com/software/0039362.asp?model= and http://software.canon-europe.com/software/0039378.asp?model=) and I'm guessing one of them resolved the issue, because when I connected up my camera and switched it on, iPhoto swung into action and there was my camera!
Yippee!! Normal service has been resumed!

Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list

Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list- what can I do?
Operating System OSx Yosemite IMac.

What exactly does "not recognise" mean, Kathy?
You're on Mac (thanks for providing that detail): are you getting a "could not be read" message? If you are, it's a write permissions issue with the destination. Change the permission, and all should be well.

Images files not recognised from Canon 5D Mark III

iPhoto will not recognise any files from my Canon 5D Mark III. I have tried everything - updated all software, purchased the newest version of iPhoto, formatted the memory card, used a different cable, tried a different memory card. Tha battery is also fine
I really have no idea what is going on. I have just upgraded from a Canon 5D Mark II and I never had any problems before.
Any ideas?

Is the memory card recognized if connected to the Mac with a card reader, built-in or external?
Have you applied this updater: Digital Camera RAW Compatibility Update 3.12?
OT

Canon scanner not recognised after Mac wakes up.

Hi
I have been using a Canon LIDE 60 scanner since I bought my eMac 4 or so years ago. It's always worked fine.
But since upgrading to Leopard a few months ago I've been having trouble with it.
What happens is that after the Mac goes into deep sleep mode (it's set to have the hard drive sleep too) and the scanner is not recognised after the computer wakes up.
I get an error message when I open up a TWAIN program (CanoScan Toolbox or Image Capture) saying that there is no scanner available.
Sometimes, usually actually, if I disconnect the USB cable and then re-attach it the scanner becomes available again. But sometimes not.
I have what I believe to be the most recent driver for this scanner, dl'd recently from Canon's web site. First I uninstalled the old driver and then restaterd my eMac before installing the new driver.
I'm using whatever version of Image Capture came with Mac OS and I'm using CanoScan Toolbox version 4.9.3.4 (version 5.0 does not work at all).
Any way to get this to stop happening?

Bump
Joey Goldstein wrote:
Hi
I have been using a Canon LIDE 60 scanner since I bought my eMac 4 or so years ago. It's always worked fine.
But since upgrading to Leopard a few months ago I've been having trouble with it.
What happens is that after the Mac goes into deep sleep mode (it's set to have the hard drive sleep too) and the scanner is not recognised after the computer wakes up.
I get an error message when I open up a TWAIN program (CanoScan Toolbox or Image Capture) saying that there is no scanner available.
Sometimes, usually actually, if I disconnect the USB cable and then re-attach it the scanner becomes available again. But sometimes not.
I have what I believe to be the most recent driver for this scanner, dl'd recently from Canon's web site. First I uninstalled the old driver and then restaterd my eMac before installing the new driver.
I'm using whatever version of Image Capture came with Mac OS and I'm using CanoScan Toolbox version 4.9.3.4 (version 5.0 does not work at all).
Any way to get this to stop happening?
Message was edited by: Joey Goldstein

I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?

I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?

Thank you for your reply. I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years. The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import. Now all of a sudden my iMac does not recognise the camera. However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing. So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years. I can only assume that the settings on the iMac may have changed, but I cannot verify this.

Canon G7X camera raw files not recognised in Aperture?

I use Aperture 3.5 extensively and have updated to, I think, 6.07 which is the latest update pack but the RAW files are still not recognised in Aperture. Am I doing something wrong or any idea when aperture will be updated for this relatively new camera. Many thanks

The list of cameras that are supported by Aperture is here:
http://www.apple.com/aperture/specs/raw.html
Your camera is not yet on the list, sorry. You'll have to wait for the RAW support to be released. You amy want to use your camera's software to develop the RAW files and to convert them to another lossless format.

Can some one help me reinstall my MP640 software on my Imac and macbook pro? as the software does not recognise os 10.7.5

My Imac and macbook pro stopped accessing my MP640 via the home wifi set up, so I sent all the canon software to the trash on both computers, thinking I should reinstall the software I got with the printer, but the software does not recognise os 10.7.5. I am using a netgear modem. I also use time machine to back up to time capsule.

Your Canon Pixma MP640 driver:
http://support.apple.com/kb/DL899

Canon A-DEP not recognised in LR

Similar Messages

Maybe you are looking for