Canon ALL-i and Premiere

I'm trying to find out if there are any known issues in Premiere 6 when editing footage shot on a Canon 5D MIII using ALL-i compression. Anyone?

I would ask over in the Premiere Pro forums http://forums.adobe.com/community/premiere.

Similar Messages

Canon Vixia HG21 and Premiere CS3

We just purchased a Canon Vixia HG21 and are unable to import the footage into Premiere CS3. Files are of .m2ts extension. Is Premiere CS3 not able to read these? Is CS4 better or able to? What are our options?

we have upgraded to CS4 and the program still can't import the m2ts files this camera generates
I assume that this means that you have the full-paid version of CS4. Is that correct? The reason that I ask is because the trial version will not handle anything MPEG.
Now, there have been reports of full-paid versions of CS4 reverting to the trial version, with the updating to CS4.2. If this has happened, again, you will not have support for anything MPEG. One test would be to find an MP3, or some other MPEG Asset, and try to Import that. If you get a failure, you likely have a trial version now. See Below:
The "cure" is to de-Activate your version and THEN uninstall. Run the Adobe Clean Script CS4 3 - 4 times, rebooting between each. Next step is to install the CS4 version, Activate again and then apply all updates to CS4.2. We do not know what causes a few updates to change the installation to the trial, but it happens too often. The above steps, in that order, work for all.
Good luck, and let us know if that helps.
Hunt

Canon XH G1s and Premiere CS4

I just bought a Canon XH G1s and tried to transfer some footage to Premiere. It would not allow me to view the footage while importing, even though it did import (with some problems on a few of the clips, like saying that one clip had been captured at 110 fps). I am using a new G5 with Premiere CS4, and am hoping that the camera is compatible. I would hate to think I spent $7,000 for a camera that won't work with CS4's Premiere Pro. Yikes! Any help would be appreciated.

Thats correct no image in the capture screen while capturing.
You could use HDVSplit instead, which also does scene splitting which Premiere doesn't.

Does anyone use Cineform Neoscene with Canon t2i footage and Premiere Elements 10?

I'm wondering if its worth the $100.00 investment - not looking to spend more money but I really want to avoid the hassle I've had with other editing programs...... I will be using MOV H.264 footage from Canon Elph 500 and Canon t2i and looking ffor the easiest workflow and I came across this item and am wondering if people have used it.
Thanks!
Maureen

QT Pro can do Cut-and-Butt editing, and if that is all done, can Export without Retranscoding the footage.
For much more than that, however, it lacks the capabilities.
I do not know how well CineForm's NeoScene works with PrE, but before PrPro got full AVCHD native support, was very popular with the PrPro users. I cannot recall anyone having an issue with it, in that program, but might have missed a complaint, or two.
Good luck,
Hunt

Canon HF11 AVCHD and Premiere Pro CS4

I had been using a Canon Optura xi for years with good success, and recently with Adobe On Location with good success.
Recently I decided to take the plunge into HD and purchased the Canon HF11 which has AVCHD.
I realize now that without firewire support I cannot use On Location. Too bad because I really liked the ability to note my scenes, etc.
I'm having a little trouble getting everything to work together and was hoping someone could offer some suggestions.
My output is going to be hi def for you tube and for family movies (burned to DVD and/or AppleTv).
1. If file size is not an issue should I always shoot at highest quaility?
2. Would I choose the setting AVCHD 1080i30 (60i) non-amorphic?
What recommendations would you have for exporting to You Tube, DVD, and Apple TV. So far my exports have been a little blocky.
Last, would you recommend purchasing AVCHD upshift to make the editing process a little less painful ($50 vs a $3,000 for new system).
Chris

Thanks for the response. I'm going to try this out tomorrow for youtube.
If I were to export from premiere for anything but youtube and maintain highest quality for playback on a PC what would you suggest? There are just so many presets I don't know what to pick. I've tried a few (Quicktime) and they look lousy.
Maybe I'm missing something, I see other people mentioning interlacing, etc. Someone else suggested shooting 24P to eliminate interlacing issues?
Thanks for helping me get to a resoltion.
Chris

OS X 10.6.7 Canon All-in-One 480 Printer will not print files, only blank pages. Have to go to Utilities, Disk Utility and Repair permissions for a temporary fix. How can I get a permanent fix?

After upgrading to OS X 10.6.7., my Canon All-in One MP 480 printer will not print. it says it is printing, but the sheet of paper just runs through the printer and comes out blank. I finally went online to just answers.com and got a fix involving the System preferences, printer and fax. i was told to go to Applications in the HD, thenUtilities, then Disk Utilities, highlight the HD and check on Verify Disk. If it says Disk is OK, click on Repair Permissions. At first, that worked, but the next time I went to print after turning the printer off, it refused to print and just ran the sheet of paper through blank. Once that happens, there is no way to go back to printing the file that failed. I fiinally had to copy and paste the info from the file that would not print and put it in an email to myself and then print that. This is very frustrating, and I would really like a final solution for the problem.
bettyfroomneedham

There's a lot there, so I'll start with the parts I can answer quickly.
The "ACL found but not expected..." messages can be safely ignored, so says this article
http://docs.info.apple.com/article.html?artnum=306925
(look below all the "SUID" examples)
I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
Please post back with the remaining point of concern.

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

(Photoshop and Premiere Elements 9.0) + (Photoshop cs5 extended) installed all at once any issues?

Hello,
1. I have Photoshop and Premiere Elements 9.0 currently installed. I would like to download and try Photoshop cs5 extended. I know they have different Camera Raw versions and other items different. Will they conflict with each other in any way? Will the newer camera raw support for Photoshop cs5 extended break the older camera raw support in Photoshop and Premiere Elements 9.0?
2. Was also thinking about downloading and checking out Lightroom trial, would the organizer in Photoshop and Premiere Elements 9.0 conflict at all with the bridge or whatever is used in Lightroom?
3. I love the quick touch ups and teeth whitening etc I can do in Photoshop Elements 9.0, is there a comparable tool in Photoshop cs5 extended or Lightroom? I mean I am sure you can do anything in Photoshop if you're good enough at it. But I like that in Photoshop Elements 9.0, it has the dummy version where I simply point highlight and click.
Thank you for your time,
J

Thank you Barbara B.,
Do you know if there is a basic reference somewhere on adobe for performing tasks on both pieces of software? Thanks to you I know how to replace the teeth whitening function, but what about for instance the "slimming" tool, or the eye lash darkening tool etc? I know I can google each tool I am sure. But is there a single "bible" like reference for the various commands or tool functions shared between the two? Are there any books you recommend etc?
Thank you for your time,
J

I have a Canon Rebel t5i and a mac - will I have to convert the files from my camera before being able to edit in Premiere Elements?

I have a Canon Rebel t5i and a mac - will I have to convert the files from my camera before being able to edit in Premiere Elements?

What version of P-Elements, and what codec does the camera produce?

After download and installation, InDesign, Flash, Dreamweaver and Premiere Pro all won't fully launch.

After download and installation, InDesign, Flash, Dreamweaver and Premiere Pro all won't fully launch. From the Windows icon pane, I click on the program, it opens the Sign In Required pane, I sign in, it opens the Thank You pane and reverts back to Sign In pane or never opens the program.
Acrobat also keeps giving me a popup to sign in, each time I look at a .pdf file.
I have tried uninstalling Acrobat and then redownloading. It didn't work.
Anyone else find a fix?

Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
Good luck,
Clinton

Just purchased an hp all in one and I can't download software called apple and they suggested either epson or canon as hp always causes trouble to mac's can anyone suggest a good ebson or canon all in one.

I just purchased an HP All-In-One and when I went to download software it said my Mac didnt support it to contact HP. When I contacted HP they wanted me to pay to set up my computer so the machine would work. I contacted Apple and the agent told me to take it back and get either Epson or Canon as HP is not always Mac friendly can anyone suggest a good Epson or Canon All In One. Thanks for your help..this HP is going back.

You will probably value these features:
1. Decent speed
2. Reliability
3. Low cost of operation
4. Wireless usage
5. Strong printing quality
Epson withdraw support for my old printer, so I've stayed with Canon - who regularly updates its drivers. The Canon MX 892 has been getting strong reviews for print quality, speed, and special features. Refills, through a third-party vendor, can be very reasonable; so the liberal use of ink probably won't be a major concern (unless you choose to stay with the Canon-branded ink). Price is as low as $139, new, and about $100 used.

I installed creative cloud photoshop, bridge and premiere pro. All start except for premiere pro. It cant be clicked from creative cloud control panel. Only removed

Plz help

Nope..
It states as installed, But NOT in program files Adobe directory
Verstuurd vanaf mijn iPad
Op 9 feb. 2015 om 22:48 heeft Jeff A Wright <[email protected]<mailto:[email protected]>> het volgende geschreven:
I installed creative cloud photoshop, bridge and premiere pro. All start except for premiere pro. It cant be clicked from creative cloud control panel. Only removed
created by Jeff A Wright<https://forums.adobe.com/people/JeffAWright> in Creative Cloud Download & Install - View the full discussion<https://forums.adobe.com/message/7178713#7178713>

New User: LR imports all Canon RAW's and jpgs Red / Pink

I'm not a guru or professional - I shoot alot with an XTi / 400 with various lenses - been successful using Canon's software. Downloaded LR and imported Canon RAW's and they're all red / pink - entirely red / pink. I have spent 3 to 4 hours reading forums / searching for answers and cannot find anyone else with this problem. I then tried importing jpgs from a Sony - they're also red / pink - very frustrating. Leads me to believe perhaps I have a driver / card issue on my computer.
I'm running a 2.8 P4 with HT, 1 gig RAM, video I think is an older nvidia 9600 (not sure I'm not at my computer this moment). Anyway, anybody with any tips on what to do? I have been through every menu item repeatedly looking for some kind of clue - heretofore the answer eludes me.
Appreciate any help / hints!
Trey

My usual suggestion it to start out by adjusting your monitor by eye using Norman Koren's calibration charts, after eliminating any monitor profile in the OS.
http://www.normankoren.com/makingfineprints1A.html
http://www.normankoren.com/makingfineprints1B.html#gamma_3lvl
If you are not satisfied with those results, you can move on to something like the Pantone Huey or Huey Pro, the ColorVision Spyder series, one another similar device.

AVCHD blown highlights in AE and Premiere Pro CS6

Hi Guys,
I have the NEX 5n and Premiere Pro CS6 on Windows 7 Workstation.
It seems as if Premiere is geting the 0-255 16-235 Levels kind of wrong. AVCHD files of all kinds have clipped highlights when exposure on the NEX or any other camcorder is set spot on before clipping.
In PP cs6 and cs5.5 you can just bring all the Information that is above 1.0 in the waveform down with any 32 bit Filter that deals with Levels. But it schouldnt be up there above 1.0 in the first place or am I wrong?
This also applies to the Canon XA10 camcorder
clipped whites:
[IMG]http://i46.tinypic.com/az9fm.jpg[/IMG]
Levels adjusted with 32 bit Filter in PP = No clipping in highlights
[IMG]http://i48.tinypic.com/ofrl86.jpg[/IMG]
In AfterEffects its different: You would have to work the whole AE Project in 32 bit to be able to save the clipped detail in the whites. If you work in 8bit (which is standard ae project) then AE will just cut off all the info above 1.0.
But the question is: Is Adobe getting it wrong in the second consecutive Version of PP that is supposed to deal nativly with AVCHD? Or why do highlights that are not clipped on any AVCHD camcorder, appear as clipped in PP cs5.5 and cs6
Even the opensource FFDSHOW codec gets it spot on when played with mpclassic (as Andrew Reid from EOSHD.com stated and I also can confirm this)
Also when I connect the nex 5n with hdmi to my Plasma everything plays just fine no clipping at all!

when exposure on the NEX or any other camcorder is set spot on
Are you saying the waveform on the camera is displaying the same image differently to the wfm in PPRO? I would be surprised if that were the case.
That paper kind of looks very "hot" and it doesnt surprise me what the wfm is showing here.
FWIW: I extensively monitor my AVCHD by using level, gray and color cards in my shots. The wfms in the camera, monitor and PPRO always correspond.
Try shooting a color chart and also checkout .some color bars generated by your camera.

Canon ALL-i and Premiere

Similar Messages

Maybe you are looking for