Canon all-in-one printer can't print? Please, help

Hello.
I recently bought a Canon Pixma MG3550 all-in-one printer. I didn't get a USB cable in the package so i decided to connect it wirelessly. I tried everything but it just couldn't connect. So, I went to the store and bought a USB cable for printer. I connected my printer with this USB cable and installed drivers from the CD that came with printer. Everything went fine but when it came to the part where I can print test page I clicked 'Execute' and nothing happened. I gave up that and clicked next. When I tried to print a picture it says: 'Windows photo viewer encountered a problem printing your picture. Trying reinstalling your printer, and then try again.' When I tried printing a PDF document nothing happened.
So, my computer (Windows 7, 32 bit) recognizes this printer in Devices and Printers and it's set to deafult printer, but when i click 'Printing Preferences' it says 'Operation could not be completed' and when I click printer properites, it says: 'The Canon MG3500 series printer driver is not installed on this computer. Some printer properites will not be accessible unless you install the printer driver. Do you want to install the driver now?'. If I click Yes, the Add printer driver wizard shows up, but when i go through it and finish it it's still the same. Also, if I click 'Print test page', it says: 'Test page failed to print. Would you like to view the print troubleshooter for assistance? Access is denied.'
Then, if I go to troubleshooter it says that everything is fine. When I go to Canon Quick Menu and click 'Start my printer' it says 'the supported printer cannot be detected' but when I go to 'Diagnose and Repair Printer' it says that everything is okay.
I don't know what to do. I tried reinstalling driver thousands of times, I downloaded drivers from this site and everything, but it's all the same. Also, every time I turn on my printer on button I hear some weird noises two times about 5-10 seconds altogether. I don't know if this is related somehow, but I don't think that my device is broken because it can connect to pc and scanning works perfectly, but printing and copying doesn't.
Please help me, I'm desperate. I'm trying so hard but everything is the same and I'm so tired of this.
Thank you.

If you have any questions, feel free to ask. I hope this helps. 
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

  • I have a iphone 5c and a wireless computer hooked to a usb wireless printer Hp4215 officejet all-in-one how can I print from my phone to the printer

    How can I print to my wireless Hp officejet 4215 all-in-one printer that is usb in line with my computer that uses windows 7 from my Iphone 5c

    there are 2 ½ ways to print
    1. the printer support AirPrint and it works out of the box
    2. one get a printing app from app store which support the printer
    2-½ one get the free software from netgear called netgear genie which will make the computer display all printes it's know act as AirPrint printers
    no other things in the known universe will make printing possible

  • HP Premiun All-In-One 6700: Can't print Adobe CS3 in Mac OS Mavericks

    I have an HP 6700 Premium All-In-One printer. I have OS Mavericks on my Mac. 
    Now I can't print from any of my applications in Adboe CS3.  Apple says my printer manufacturer has a driver to download to fix this. 
    Where is it???
    Thx

    I can print pdf's - but without any duplex option - on Mac OS Mavericks, whereas duplex works from my old wXp desktop! 

  • I have a HP PSC 2210 all-in-one. Can I print a status page that shows count of pages printed?

    I said everything in the subject except, if there is a status page printing capability how do I do it,

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Deskjet 1050 All-in-One J410e can not print in draft mode.

    I wanted to print in Draft mode (300x300 dpi).  I went to Avanced Options to adjust the resolution, but the drop down menu says "The following is for informational purposes only. Clicking on anything in this list will not change your Print Quality setting."
    I was also unable to select Draft mode in the Preferences>Paper/Quality tab.  Normal is automatically selected and the other options (Best, Draft, Custom) are grayed out. 
    What can I do to print in Draft mode (300x300 dpi)?

    1st_HP_printer,
    I believe the answer is best worded on Pg9 of the manual: http://h10032.www1.hp.com/ctg/Manual/c02227094.pdf
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Suddenly my mac uses only all caps and I can't restart, please help!

    Suddenly my mac started using only 'all caps', and also 'select all' with 'left click' in both iTunes and Chrome. I tried to restart, but it will only attempt to open in safe mode, and it will not accept my password. I assume this is because it will only type in capitals, so I cannot get in at all, even with my OS disk.
    This is not because of the caps lock button. I tried this many times. My cat may have walked on my keyboard though. When this happened, I was copying unlinked descriptions from Chrome to iTunes podcasts. I have shut down to restart several times, and my new wired aluminum keyboard is 4 weeks old.
    About 3 weeks ago I did a complete erase of my hard drive and installed snow leopard and iWork 9 from disk, updated them, and only added my documents back on from a bootable backup. Then I downloaded Lightroom 4, and imported a few thousand photos from an EHD. My iTunes library is on a seperate EHD. Everything has worked perfectly until now. I do have a recent Time Machine backup. My APS uninterruptable power supply is about 2 weeks old.
    What can I do now?
    Message was edited by: mahtia

    Problem solved, it was my new mac keyboard, only four weeks old.
    My old mac keyboard works fine except for the row of keys on the far right,
    which is why I got a new one.
    Hard to believe a bad keyboard could mess up a mac that badly!

  • OS X 10.6.7 Canon All-in-One 480 Printer will not print files, only blank pages. Have to go to Utilities, Disk Utility  and Repair permissions for a temporary fix. How can I get a permanent fix?

    After upgrading to OS X 10.6.7., my Canon All-in One MP 480 printer will not print. it says it is printing, but the sheet of paper just runs through the printer and comes out blank. I finally went online to just answers.com and got a fix involving the System preferences, printer and fax. i was told to go to Applications in the HD, thenUtilities, then Disk Utilities, highlight the HD and check on Verify Disk. If it says Disk is OK, click on Repair Permissions. At first, that worked, but the next time I went to print after turning the printer off, it refused to print and just ran the sheet of paper through blank. Once that happens, there is no way to go back to printing the file that failed. I fiinally had to copy and paste the info from the file that would not print and put it in an email to myself and then print that. This is very frustrating, and I would really like a final solution for the problem.
    bettyfroomneedham

    There's a lot there, so I'll start with the parts I can answer quickly.
    The "ACL found but not expected..." messages can be safely ignored, so says this article
    http://docs.info.apple.com/article.html?artnum=306925
    (look below all the "SUID" examples)
    I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
    Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
    Please post back with the remaining point of concern.

  • How do I uninstall my Canon all-in-one printer software?

    How do I uninstall my Canon all-in-one printer software? I followed the online HELP instructions of moving the apps to TRASH. But I still had lots of files, and one app, that I could not get rid of.

    Huh! How simple can it be?
    Thank you, very much. I still have a few Canon files and one app remaining. I'll send them to the trash. But, the really annoying scanner icon on the bar at the top of the screen is gone.
    Thanks, again.
    Dave

  • NOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

    CANNOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

    Hi,
    I think you need to remove the queue. Please try:
        hold down the Windows key and press R.
        from the Run window, type services.msc and hit enter.
        if the machine asks for Admin you have to accept this,
        look down to the print spooler service, right click it and select properties
        click on the Stop button,
        browse to C:\Windows\System32\Spool\printers
        delete the job inside this folder
        reboot the machine
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

    İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

    Hello,
    Try following the instructions here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    If that does not help, let me know and I will see what I can do.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Just purchased an hp all in one and I can't download software called apple and they suggested either epson or canon as hp always causes trouble to mac's can anyone suggest a good ebson or canon all in one.

    I just purchased an HP All-In-One and when I went to download software it said my Mac didnt support it to contact HP.  When I contacted HP they wanted me to pay to set up my computer so the machine would work.  I contacted Apple and the agent told me to take it back and get either Epson or Canon as HP is not always Mac friendly can anyone suggest a good Epson or Canon All In One.  Thanks for your help..this HP is going back.

    You will probably value these features:
    1. Decent speed
    2. Reliability
    3. Low cost of operation
    4. Wireless usage
    5. Strong printing quality
    Epson withdraw support for my old printer, so I've stayed with Canon - who regularly updates its drivers. The Canon MX 892 has been getting strong reviews for print quality, speed, and special features. Refills, through a third-party vendor, can be very reasonable; so the liberal use of ink probably won't be a major concern (unless you choose to stay with the Canon-branded ink).  Price is as low as $139, new, and about $100 used.

  • HP Deskjet all-in-one F4440 will not print

    My HP Deskjet all-in-one- F4440 will not print.  I have put in a new color and a new black cartridge.  It clanks loudly when it moves back and forth.  Finally it stops and then pulls plain paper through as though printing on it - does this two or three times.  then it pulls plain paper halfway through and stops.  I have to tug and carefully pull halfway paper back out towards front to remove.

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Any suggestions for an all-in-one "cable modem router print server" (N)

    any suggestions for an all-in-one "cable modem router print server" (N)?

    If that's a problem with your cable company, change the company.
    If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
    If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
    If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
    In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
    You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
    It's like the all-purpose audio device compared to components...

  • IHP F2210 all in one deskjet, need to print in black, but prints in color

    My HP F2210 all in one deskjet, is having printing issues.  When I set it to print in draft in black ink only, it then prints in color, I just don't understand WHY, can anyone offer assistance?
    thank you
    miricro

    Hi there miricro,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer? I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

    I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer?
    I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

    Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025.  So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3).  When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr.  I still cannot connect and canyouseeme still can NOT find these open ports.  This is taking up my whole day! I don't know how people figure this stuff out.

  • All my pdf files can be printed in low quality on my Brother printer but can't print in high quality in the printer menu.

    My problem is that all my pdf files can be printed when I choose "low quality printing" in my Brother printer menu but cannot be printed in "high quality". When trying to print in high quality, the documents load in the printer tray and it says 1 document then disappears and 0 document printing is showing. I have some pdf files that I want to print in color in high quality and black and white but I'm unable to do so. It only prints in low quality for both color and black and white.

    Hello,
    1. Please make sure that your Reader is updated to 11.0.09. Go to Help -> Check for Updates.
    2. Also, please check if there is any new update available for your Printer Driver.
    Regards,
    Anoop

Maybe you are looking for