Canon camera no longer connects to Macbook Pro after 10.4.7 update

Has anybody gotten word from Apple on this issue yet? My Rebel XT/350D stopped connecting to my MBP after the latest software update. It has stopped working with iPhoto, Image Capture and Capture ONE. If I put the CF card in a USB reader, it is recognized (occasionally) as a removable disk.
What gives?

CZ:
Did you update the system via the Software Update? If so then download the 10.4.7 COMBO updater and run it. There are some files it's reported, that are left off the incremental updater and the combo one will fix some of the problems that causes. Not sure your problem is one of them but it's work a try. Don't forget to repair disk permissions afterward.
Do you Twango?

Similar Messages

MacBook no longer connects to T.V. after Thunderbolt 1.2 update

I recieved a 13 inch, mid 2012 MacBook Pro for my birthday on Dec. 20th 2013. A few days later I bought a Nexxtech Mini DisplayPort to HDMI adaptor which was working fantastically for a couple weeks when connecting my MacBook to my Insignia TV. After installing the Thunderbolt 1.2 update, my MacBook and TV no longer connect. The screen on my MacBook will flash for a second like it is detecting the TV, but that's it. I get a "no signal" sign on the TV. I've tried everything I could find on the internet. Resetting the PRAM and SMC, detecting through command + F2, turning off "displays have seperate spaces", and all the little rituals some people have to go through to get it to work. Nothing. I've even tried it on my parents LG TV. Nothing. I'm so ****** off. This was a huge reason I got a MacBook. Seeing that this update came out in May 2013 and people have been having the same issue since then, I'm not hopeful that Apple will be fixing this any time soon.

I also can't get the media sync to connect after the update. I can get the mass storage to work with no issue, but media sync is having issues.
Every time I connect with media sync, Windows 7 pops up a message stating that the driver failed to load and to contact Samsung. So I contacted Samsung support, which was completely useless.
I need the media sync to work because that's the only way I've found to get DRM-protected media files to transfer properly to my Charge. If I copy them to my phone while in mass storage mode, I can't play them because there is a licensing error.
Any help would be greatly appreciated!

Having trouble connecting my macbook pro after switching security from default WEP to WPA2

Background: switched to verizon fios triple play last summer and everything has been great. I have one desktop PC and one Macbook pro laptop. These are the only computers that me and my family have used on this network. I'm a college student and went away to college and just came back for Thanksgiving break. I connected to the internet fine on my macbook pro, but I noticed that the little lock next to the SSID was no longer present. I'm extremely paranoid and diligent when it comes to computer security, so I quickly began googling why the lock was no longer there. I was afraid my wifi network was no longer "locked" or encrypted. So, after doing some more research, I ended up coming across WEP and how it's not really secure, so I went through all the steps to change it to WPA2. Everything went fine and the internet is working just fine on my PC.
Now here's the problem, I went on my macbook pro and was glad to see the lock sympol was present next to the SSID on the wireless pulldown. Unfortuantely, the password is apparently not working. First I thought the password was still the WEP key which you can find on the tag on the back of the router. It didn't work, so next I though it might be the wps pin, it didn't work. Then I typed in the password to log into the site where you can change the settings(the site where you get to by typing the ip address(I think or router address(?)). That didn't work either. So now I'm here looking for an answer. Hopefully someone can give me a solution which would be greatly appreciated. Thanks.
Solved!
Go to Solution.

Nevermind........I just realized the password to the new WPA2 setting is the name you inserted when it asks you to name the WPA2.

Trackpad no longer works on MacBook Pro after update to OS 10.72.2

I just did a software update to OS 10.7.2 and upon restart my trackpad no longer works. The button does but not the pad. Any thoughts? I have never had a problem with it. There is no battery issue. No buckling or swelling. It worked, then I updated it to 10.72, restarted, and now it doesn't.
I have a MacBook Pro, 2.6 GHz Intel Core 2 Duo with 4 GB SDRAM.
Thank God I have an external mouse. HELP!

the Netflix error code is 8156-6205

Volume no longer working on MacBook Pro after Yosemite update.

The volume on my MacBook Pro no longer works after the Yosemite update.
"Internal speakers" is selected for device output.
I'm not sure how to fix this...

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

Distorted blocks of random color on macbook pro after 10.5.2 update

My macbook pro is going crazy after the 10.5.2 & graphic drivers update. This is the second time I have received large blocks of color completely filling both the macbook pro lcd and the samsung external monitor. Has never happened before on 10.5 or 10.5.1. While the screens are filled with garbage I can vaguely see outlines of programs etc.
I am a recent mac user, having purchased the laptop in late september 2007. Any ideas about what I can do to troubleshoot? Console shows no errors logs. When the system crashes, everything is still running and I can hear music playing but I cannot navigate my way to save all open work and have to power off.
Aside from that, sometimes when I wake the machine and open the lid it never wakes up and I have to power off. And sometimes when I reboot, it never reboots and sits on the final screen after everything has disppeared.
Any ideas?

Disconnect all peripherals from the computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Once you reach the desktop, repair permissions.

09 macbook pro, after 10.6.6 update won't wake from sleep without power

Hey, weird thing going on here. After I updated to 10.6.6 on my '09 Macbook Pro it won't wake from having the lid closed unless the power is plugged in. I've tried closing the lid with the power still plugged in, and unplugging it before I close the lid. If I leave he power plugged in it works fine. If I unplug it after I've closed the lid, or even BEFORE I close the lid (and give it time to calculate battery life and everything) it turns off like it was a out of battery and I have to hold the power button down to make it wake, then it does the blurred out screen with the progress bar at the bottom (like recovering from low battery), but eventually comes back. The battery indicator on the bottom shows it has a nearly full battery when this is happening. I've tried adjusting sleep and power/energy saving settings but nothing has fixed it.... anyone got some ideas? It never did this before the 10.6.6 update
Thanks!

Im having the same issue.
Seems to have happened just after 10.6.6 upgrade
Battery only has 80 cycles on it and shows full charge
i dont get the hybernate wakeup screen, but shuts down promptly after unplugged, and wont startup without power.
Tried:
*SMC RESET-holding power without battery in for over 5 seconds...no change
*P RAM RESET-holding commandoption+pr during startup... no change
*Installed applejack and ran all options... worked... for about 20 minutes then shutdown
*Changed sleep settings...battery settings...hibernating settings...
im outta ideas....

IPhone 4s No Longer connects to Car Bluetooth after iOS 7.1 Update

My iPhone 4s has been paired to our 2006 Acura TL hands free link (Bluetooth) and working flawlessly for more than a year. After the iOS 7.1 update installed on my iPhone the connection has been lost and the car's Bluetooth does not recognize, and will not pair with my iPhone anymore! I noticed there were two back-to-back updates for iOS7. The first one caused intermittent interruptions and lost connections with the iPhone. The second update completely destroyed the connection between the car bluetooth and the iPhone. Any ideas on how to correct this problem would certainly be appreciated. Thanks!

Hello algee1,
Thank you for the details of the issue you are experiencing with pairing your iPhone with your Acura.
In my experience, when updates are released for iOS devices, compatible devices release an update to maintain compatibility. Step 2 from the article below recommends checking with the manufacturer of your car stereo to see if there is a firmware update available for your car stereo:
2. Update software and firmware if necessary
Verify that both your car stereo and your device have the latest software versions. Contact the manufacturer to see if any updates are available. If your device does not have the latest version of the iOS, update to the latest software version.
I recommend reviewing the full article here for additional troubleshooting steps:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
I also recommend these steps if the issue persists after following all the steps in the previous article:
Unable to find nearby Bluetooth accessories
If a pairing record already exists, the device does not appear as discoverable. Try to connect the device using that pairing record.
If you are unable to connect using the existing pairing record, delete the record and pair again.
Ensure that the firmware or software on the Bluetooth accessory is up to date.
Ensure that the Bluetooth accessory is charged or connected to power.
Verify that the Bluetooth accessory is using a profile that works with the iOS device.
Turn off both the iOS device and the Bluetooth accessory, then turn both devices on again.
If the issue persists, test Bluetooth with another device or consult the manufacturer's documentation.
You can find the full article here:
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
Thank you for using Apple Support Communities.
Best,
Sheila M.

Energy Saver still crashing MacBook Pro AFTER 10.9.4 update...

It's simple.
Display Sleep and Computer Sleep turned off = no crashes.
Computer Sleep turned on = crashes.
Anyone else still experiencing this?

I have been looking at the console since the crashes started. I recently repartitioned and reinstalled everything from the ground up. It was solid for awhile, but started crashing soon after. To be clear (which my title wasn't completely), the crashes started with 10.9.3. Anyway, here's the first part of the last crash...
Process:         WindowServer [110]
Path:            /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/WindowSe rver
Identifier:      WindowServer
Version:         599.25.10.1
Code Type:       X86-64 (Native)
Parent Process: launchd [1]
Responsible:     WindowServer [110]
User ID:         88
Date/Time:       2014-07-05 17:54:39.020 -0400
OS Version:      Mac OS X 10.9.4 (13E28)
Report Version: 11
Anonymous UUID: E0E22650-5AA2-A7CA-733A-166203F8F4F7
Crashed Thread: 4 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x000000017d202000

My Apple TV no longer sees my MacBook Pro / Itunes Library.

My Apple TV no longer sees my MacBook Pro / Itunes Library. Apple TV tells me to turn on Home Sharing on my computer, which I have.
Also:
1. All other ATV connections are working (Netflix, movie previews, etc.)
2. I have all the latest updates for ATV and Itunes
3. Home sharing is turned on for both ATV and MacBook Pro Itunes
4. I am correctly logged in to my Itunes account on both ATV, and Itunes on the MacBook Pro
5. Everything had been working perfectly for approximately one year until yesterday.
I'm not sure what to try next.
Thanks.

Thanks. I just closed Itunes, came back today to check it out and the pull down menu with "Computer" or "Apple TV" was inexplicably back again and everything now works. I had tried restarting Itunes, the modem, and router before with no luck. Anyway, it's magically working.
Thanks.
KGEye

Apple magic mouse keeps losing connection with Macbook pro

I have a 2012 macbook pro, after upgrading to Mavericks(10.9.1, not have any other 3rd party software,just pure OS X), my magic mouse always losing bluetooth connection suddenly every one or two days. When losing connection, I found the bluetooth chipset type showing in macbook system information changed to unkown (FFFF). I have contacted with apple global support, and also have not gotten the solution. Just cleaning cache, and ect. but still didn't work.
When I downgrading the OS X to 10.8.5 Mountain Lion, same macbook, same magic mouse, work very well. Never happened lose connection issue during one and a half month. So, it should be a Mavericks bluetooth driver's issue, or something reletived.
Any body have some good idea in solving this issue?
Thanks in advance!

I have the same problem with a 2007 MacBook Pro on Snow Leopard. As soon as I changed the mouse's batteries, it started losing connection every few seconds. The mouse came with Energizer batteries originally - they supposedly don't fit well, but the mouse worked fine. I exchanged them with Duracell, which gave problems. Now I have Varta batteries installed, they give problems too. The paper-trick doesn't work for me.
Quite franky, I think it's rediculous that a fancy €69,- wireless mouse is so fussy about batteries. It's impossible to work with it. Is this just another way for Apple to get people to buy their batteries? I think a mouse this expensive should accept any and all batteries. Please, Apple: fix it. Seems like a really simple matter. Just put longer and stronger springs in the contacts for the negative poles.
Thanks.

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

How do I connect my MacBook Pro to an LCD TV (with HDMI and S-Video ports)?

How do I connect my MacBook Pro to an LCD TV (with HDMI and S-Video ports)? I assume I would need to use the DVI to Video adapter that came with my computer to connect to my LCD tv. I'm just not sure which port I should use on the TV. The HDMI port is being used for digital cable.
Also, does anyone know if this can be done wirelessly?

For a 2010+ MBP you can connect with a Displayport to HDMI, which will include Audio.
With older MBP you will need a displayport to HDMI, if you want audio to the actually TV, then you will need to get a cable with either digital out from MBP to the HDMI, or USB audio mixed into the HDMI
eg
http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/

What do i need to connect my macbook pro to my samsung widescreen tv?

My Samsung Widescreen TV has a hook-up (15 pin connector/serial port?) for a PC. What do I need to do to connect my MacBook Pro to it and can I use the TV as the monitor or for viewing an internet website? I'm trying to use the larger screen for a meeting of several people to discuss website improvements?
Thanks

If you can tell me whch TV & MBP you have i can give you exact cable part numbers and settings but short of that i'll try & see what i can do for you. Older MBP do not support audio over the HDMI & by default VGA doesn't either so will need an audio cable in addition to the video regardless which input you use. aparently newer MBP Do support audio over HDMI so as long as your TV does also you're a one cable hookup. My Samsung has a specific HDMI port labled DVI/ HDMI which accepts a cable i got at the apple store & simply plug play. Look in your samsung manual to verify what resolutions the TV suppports, select the input & mode from your menue and set the resolution & you should be good to go. Obviously you'll need to do a little tweaking inorder to optimize the screen but assuming you're familliar with your mac to begin with it's a no brainer. you might not be able to run optimal resolution on the TV untill you close the lid (clamshell mode) on the MBP which means you need a key board & trackpad or mouse. on the other hand if you are attempting to mirror the displays or use it as a 2nd display those modes are also available from the MBP setup. you can detect & gather your screens & calibrate the screens right on the MBP (under dispalys) and once you have the TV reckognizing the input it's nothing but a monitor. now all of the above assumes you are NOT running Lion as i'm NOT. I hope this at least gets you in the ballpark.

Thunderbolt to hdmi... is there another way to connect my Macbook Pro to my HD TV

I want to connect my Macbook Pro to my tv and have read nightmare reviews about the Belkin cable to connect the thunderbolt to HDMI... I need to make this happen as cheap as possible and don't know which route to take?

Here is the start of the setup:
Click on the Wi-Fi Options button and provide the needed info:
Click on the OK button. Now check the Internet Sharing box to turn it all on. If the port box you checked is no longer checked, then uncheck Internet Sharing, check the port box again, then check the Internet Sharing box again.

Canon camera no longer connects to Macbook Pro after 10.4.7 update

Similar Messages

Maybe you are looking for