Canon CLC 700/800/ - ColorPASS M20

Hello!
I have a Canon CLC 700/800 printer and a ColorPASS M20 printing rip connected to it.
After upgrading to 10.6.4, I can no longer add the printer. My Mac can't find it. It's probably a driver issue, but it does not seem to be any Snow Leopard drivers existing for this printer, nor for the M20 rip.
The updated driver package that Canon released a couple of weeks prior to Snow Leopard release does not include drivers for my printer.
Is there any way to get this printer working with Snow Leopard?

Okay, found the M20 Administration Guide but the PDF was locked for copying. So I have written out the procedure for you below.
With regards to the internal web page of the M20, there is a section called Fiery WebSetup. This lets you configure the M20 remotely, however this is only supported over IP and Windows. So since the IP is not yet set then we cannot configure remotely and will have to use the control panel of the M20.
1. Press the Menu button and go to the Functions menu
2. Scroll with the down arrow and press the button next to Reboot Server
3. At the setup message, press any key
4. Choose Run Setup
5. Press the button next to Network Setup
6. Select Protocol Setup
7. Select TCP/IP Setup
8. Set 'Enable TCP/IP for Ethernet' to Yes
9. Enter a valid IP address for your network
10. Enter the correct subnet mask for your network
11. If there is a router on the network you can enter this IP address in Gateway Setup
12. You can now save and exit the Network Setup but while still in Network Setup you can enter Service Setup
13. Enter LPD Setup and set 'Enable LPD' to Yes
14. Exit from Service Setup and then exit from Network Setup
15. Then select Exit Setup. This will reboot the M20

Similar Messages

  • Print with 10.9 on Canon CLC 11xx Via ColorPass Z800?

    I would like to ask if above is possible?
    (Because of difficulties printing with 10.6.8,
    the white borders around the printed areas went big,
    I went back to 10.6.6
    Today my iPad doesn't join 10.6.6 anymore
    that is why I would like to install 10.9.)
    Thank you

    There is no driver for the Z800 for 10.9. But I'm pretty sure there wasn't one for 10.6 either, so you were either using the Generic Postscript driver, which would explain the large margins, or a driver for some other model of ColorPASS (or Fiery).
    EFI does have a generic driver called Fiery Express which you can download from EFI. Note that you will have to register first to be able to access any driver.

  • I can't import video from my canon ixus 700...help

    The first time I plugged my new canon ixus 700 into my powerpook G4 all the photos and videos from the camera were imported with no problem. Since then, I have been unable to import my movies from the camera but the pictures import with no problem. I also can't find a place on my computer to "browse" my cameras contents. I'd appreciate any help anyone could give me.
    Heber

    Hi Heber,
    How big are the video clips?
    Canon cameras do not mount as a volume on your hard drive. You can insert the card into a media reader and that will mount so you can browse the contents.
    Try Image Capture to download just the video clips. I prefer that method and it is what I do. I like keeping my video clips in my Movies folder for easy backup to disc.
    Using Image Capture to download images and video clips:
    Open up Image Capture which is found in the Applications folder.
    When it is opened, go to Image Capture/Preferences
    Under the General button choose
    Camera: When a camera is connected, open Image Capture.
    The next time you connect your camera Image Capture will open.
    In the window that opens you will see an Options button. Click on that button to set your options.
    To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
    iPhoto: How to Change the "Open Automatically" Preference
    Using Image Capture to download just the video clips for your camera:
    After you have downloaded the images from your camera into iPhoto, Open Image Capture and it will detect your camera. choose to download some, then in the next window, scroll to find the video clips and choose them to download. They will download into the Movies folder.

  • If you need to design a list 700 /800 fields . What is the Ideal way to do

    If you need to design a list 700 /800 fields as per the customer requirement . What is the Ideal way to do

    SharePoint is likely unable to support that many fields.
    https://technet.microsoft.com/en-us/library/cc262787.aspx?f=255&MSPPError=-2147217396#Column
    An External Content Type using BCS may be able to workaround this, but that will involve more development time.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Canon MP 700 - problems printing from Leopard

    I have a Canon MP 700 printer and was using it happily until I upgraded to Leopard. I visited a whole bunch of forums in search of a solution and tried to "trick" my MacBook into printing by attempting to piggy back ride on other Canon drivers, but nothing works. Most drivers don't work because there is no communication between my MacBook and the printer, it just gives me an error message. When using the Canon PIXMA MP780 - Gutenprint v.5.1.3 there is communication between the two as the job is transmitted and processed, but the image quality is very poor (the colors are off, mostly yellow and red lines instead of a complete picture). Does anybody know if Canon or Apple are coming out with a Leopard compatible driver for the MP 700? I would really like to avoid having to buy a new printer.
    Thanks for any and all advice you may have. With gratitude - Anna

    Looking at the Canon Australia web site, there is no printer driver for Mac OS X, let alone for 10.5. So it looks like you will have to persevere with Gutenprint or you could purchase PrintFab (www.printfab.net) which does list the MP700 as a supported printer.
    PaHu

  • Canon CLC 1000 snow leopard

    Any idea how to get snow leopard to print to me Canon CLC 1000 color copier. It used a Fiery Rip V80.
    I have a big print job to get done right away, but can't seem to add it. I tried to LPD method, it acts like it's sending it, but the RIP never shows it.
    HELP!

    Mytechy,
    FYI, one way to be able to print to the canon is if you have another mac (that still has Leopard) on your network. on that mac go into system prefs > sharing > turn printer sharing on. once printer sharing is turned on the printer will appear in the printer list as "shared bonjour" and you can add it.

  • Printing to greyscale by default with the Canon CLC 4040-H1 v2.0 PS Driver

    We recently got our new Canon CLC 4040-H1 up and running with the v2.0 PS Driver.
    The problem is, unlike our Canon 3220-C1, we're unable to set it to print to greyscale by default.
    In the client driver software for both the 3220-C1 and the 4040-H1 there is a drop down menu for choosing colour, greyscale or "printer's default." The "printer's default" option is also the drop down menu's default setting.
    The problem is, as opposed to the 3220-C1, the 4040-H1's Fiery onboard driver software doesn't have an option under PS Setup to choose what you want this default setting to be. So the default is colour.
    We've got our technical engineer's looking into it further but I'm not holding my breath. In typical Canon style we have a regression inherent in our "upgrade" and trying to get Canon or EFI to update this driver software will probably be like getting blood out of a stone.
    So, does anyone know a work-around for this? Have I overlooked anything?

    Hello Christiaan,
    We don't use this setting on our iR C5185-H1, as we have a b&w iR for text-only work, but I checked the H1 config page and agree that no setting is available to default the machine to grayscale. The interesting thing is that without the H1, the iR C does have the ability to set b&w as a default, but this setting is not available when the H1 is attached.
    The only thing I can suggest is to create a b&w preset and educate your users on using this preset. Note that once a preset is selected, it will stay the default until the preset is changed.

  • Cannot print A3 from InDesign to Canon clc 4040 printer

    Hi I have a problem that may or may not have anything to do with InDesign...
    Office with 5 Mac Pros, PowerPC models, all running identical OSX 10.5.latest, Adobe CS4 everything.
    All software up to date. Basically all machines identical.
    All users are storing their files on the same network volume.
    3 Macs can print A3 to the Canon clc 4040 but 2 cannot. This is Mac20 used by Kirsti and Mac07 used by Kevin.
    If Kirsti sits at Mac20 she cannot print A3 from InDesign. It prints an A4 page, being part of the whole A3 document (its not the A3 doc shrunk to fit A4) The same goes for all other apps including MS Word. Page setup =A3, printer setup = A3, result... printer prints A4. BUT she can print A3 from Quark XPress 8.0.
    If Kirsti logs in to another Mac she still cannot print A3 BUT the usual user of that Mac CAN print A3. But if they try to print Kirsti's files A3 they cannot.
    All Macs have exactly the same driver from Canon. Latest version 2.0 from their website.
    Deleting the InDesign preferences from the Mac makes no difference.
    All Macs on same network.
    All connecting to Canon clc 4040 via network using IP or using Bonjour. Same result with either protocol.
    I have deleted and re-installed the printer countless times.
    The only "work around" is to remove the A4 tray and "force" the printer to use A3.
    The above scenario is the same for Kevin on Mac07
    The Canon CLC 4040 has a "Fiery RIP" whatever that is...
    Can anyone point me at where the problem lies? I have had a Canon tech on site but he could do nothing.
    Message was edited by: Triumph5ta, corrected a typo.

    My experience is with CS2 on OS 10.3.9 and 10.4.11, so this may have changed in CS3, or 10.5....
    Setup a custom paper size for your printer.
    This can be accessed from within the InDesign Print window.
    File > Print
    Select your printer from the
    Printer: pulldown menu (if not already selected)
    Click
    Page Setup... at the bottom left
    Click
    Settings and then select
    Custom Paper Size from the list of options
    Click
    New, name the style, define the paper size and printable margins, and save it.
    Click OK to exit the page setup.
    In the InDesign Print Window, Click on
    Page Setup... again
    Select
    Your New Paper Size in the Page Setup
    Paper Size: pulldown, then click OK.
    InDesign Print window
    Setup should reflect the new page size and list the paper size as "Defined by Driver"
    If your document page size is the same as your paper size, then the preview in the lower left should reflect that.
    HTH
    -mt

  • Canon EOS 700 D und RAW mit Photoshop Elements 11

    Ich besitze die Kamera Canon EOS 700 D und arbeite mit Photoshop Elements 11. Ich möchte meine RAW Daten der Kamera mit Photoshop bearbeiten, nur kann ich den Datenformat meiner Kamera (CR2) nicht öffnen. Was kann ich tun?? Wie bekomme ich CR2 in eine Format konvertiert, was auch Photoshop akzeptiert?
    Ich bitte um schnelle Antworten!!
    Vielen Dank im Vorraus!
    LG Jasmin

    Photoshop elements 11 should be able to open the canon 700D files after updating the camera raw plugin to version 7.4
    Which operating system are you using?
    Have you tried Help>Updates from within the pse 11 editor to get the 7.4 camera raw plugin update?

  • Is mountain lion ok with canon iPF 700?

    it seems that os X 10.8 doesn't work with canon iPF 700
    any suggestion for drivers
    (no problem with 10.7)
    thanks

    Hey PAHU...
    I got my iPF700 working with ML on my macbook but when I installed ML on my iMac and I think I did the same process but when I try to print I get the following error in the print queue
    E [13/Aug/2012:15:36:26 -0500] [Job 9] cmucStartJobRender: Error
    E [13/Aug/2012:15:36:26 -0500] [Job 9] cmjcRenderStart: Failed
    E [13/Aug/2012:15:36:26 -0500] [Job 9] capdftopdl: Render Error
    I have reset the print system multiple times
    Deleted printer plist's
    Any ideas?

  • HT204135 why does my Canon Selphy cp 800 printer not show up in printer drivers?

    Hi
    I have an selphy cp 800. I tried to instal the Lion driver But no luck. i Bought this printer before i upgraded, and I am a bit frustrated that Apple or Canon doesent care.
    Lion has been out for a year soon, and there is stil no update for lion os with a cp-800 printer driver?
    Hope some one can help me My os is now 10.7.04
    regards
    Steven 

    Interesting Matt. So no version of the Gutenprint CP800 driver ever worked?
    That is my current, best understanding.  There is a relatively new maintiner for the Canon code at Gutenprint.  He has done a lot of work over the past year or so.  One of the things I think he discovered is that there were certain Selphy printers that need an "intelligent spooler".  That is, they won't work with a standard USB backend.  I think the Gutenprint driver tried to trick CUPS--and may have had some success--by sending image data in one packet and control data in another.  It was something like that.
    It would be fairly easy to see if they work by loading the 5.1.3 or just about any version prior to about 5.2.7 and test the printer.  All the packages are still on the server at http://sourceforge.net/projects/gimp-print/files/.  That exercise may not be the best idea for the original poster at this point as there is a Canon supported driver available.
    I'm reasonably sure that there was no Canon CP800 driver included with Leopard
    I just went back and loaded the Canon drivers in a Leopard installation from the Leopard install disk.  The Selphy drivers go up to CP-790.  There is no CP-800 that came with Leopard.

  • PM8M-V: Can't connect with scanner of Canon MX-700 multifunction device

    I just bought a new Cannon MX-700 multifunction printer.  After installing it on my [XP Home] desktop system everything works great except for...
    The scanner won't work.  When I try to use/load it I get an error saying that the system can't communicate with the driver (code 39).  I have worked with Canon for two weeks and tried every thing they suggested without any change in the issue.  I have removed and re-installed the Canon software and drivers so many times that it will do it by itself if it notices that I'm pulling out the Canon CD.  They also had me try 3 different USB cables though I have never seen where I could specify a type or "model" for USB cables with the same connector types.
    I have tried it with USB 2.0 enabled and disabled.  All other USB functions -- the printer, digital cameras, external disk drives and my web camera work perfectly as 2.0 devices.
    It installs and operates perfectly on my HP laptop.  The only significant difference that I can see between the two systems is that the desktop MSI mobo uses the Via chipset.  I decided that I would delete the MSI driver for the integrated USB 2.0 controller and then connect to the Microsoft Update site and get the latest drivers and see if that would cure the problem.  Then I found out that I couldn't tell exactly which of the drivers on the MSI support site was the one that included the integrated USB 2.0 controller.  I think that it may be the 4-in-1 driver but I'm not sure.
    At any rate, in looking, I ran across an article describing [what appears to be] the exact same situation -- Via chipset, driver not detecting USB device, etc. -- with the only difference being that it was a Logitech camera.  The problem it described had to do with OHCI vs UDCI compatibility and occasionally IRQ sharing under XP.
    (1) Does anyone know which of the mobo drivers provides support to the integrated USB controller, (2) are the drivers found on the Microsoft Update site the most current and (3) have you any awareness of this problem and how, assuming that it can, be resolved?
    Thanks in advance,
    Howard Woodard
    Redmond, WA
    Don't pay any attention to the config below.  That's my machine and this one -- P4 2.4 GHz Northwood, PM8M-V mobo with 1GB PC3200 RAM -- is my grand child's.

    Hmm just a thought, since your msi mobo is using via chipset, did you install the 4 in 1 chipset drivers from the mobo CD or alternatively from MSI site? Btw does your xp comes with sp2?
    If you have not done so try downloading from here
    http://asia.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=205
    Ensure you download the correct one which is mean for win xp

  • Canon eos 700 D raw in Lightroom 4 en elements 11

    Hi, since 2 weeks I have a new camera Canon eos 700D. Now my Lightoom 4 and Elements 11 don't recognize my RAW photo's. Who can help? I cannot find the download of tthe RAW version

    You need at least Lightroom 4.4 (which you should be able to download free and install if you already own a legal license for Lightroom 4)
    For PSE, you would need to download and install Adobe Camera Raw 7.4

  • My SAF. Plugin for proxy get memory 700-800 MB

    I write plugin that store access log into Oracle, and turn off users which exceed the limit of download.
    I have problem, this plugin eat memory.
    After 1 min from start it get 120-140 mb
    after 10 min it gets 700-900 mb.
    Plugin eat memory on each request and doesn't FREE it
    Any ideas???

    I solve the problem.
    The problem was in the oracle sessions

  • I am running windows xp pro, firefox vs 3.6.8, when I go to print with my canon d 700 firefox closes. This just started.

    ????/?

    Do a clean (re)install and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Maybe you are looking for