Canon Compatibility with iMovie and/or FCE

I recently purchased a Canon FS200, flash memory camcorder (standard def) and have some difficulties importing into iMovie (it recognizes and imports some clips but then decides to freeze-can't even force quit iMovie from that point) and FCE does not even recognize the device.
I am within the return period (purchased at Best Buy). Should I get out of this Canon situation altogether? Is there a DV brand that integrates more consistently with Apple?
I have all the updated hardware and software, processing power, and memory that are needed, so that is not the issue. I am just looking for some direction, or confirmation that this thing WILL work, I just need to keep at it.

Good, because I like the functionality of the camera, and the convenience of recording to flash media. I took a look at some possible differences between imported and non-imported files. I found only one thing, it is inconsistent. In my original attempt to import, approx. 8 of my files (clips) imported, and they ranged from 30 seconds to 8 minutes. The ninth one froze up. After a reboot (I had to resort to that) I was only able to import three files before a freeze. The fourth one (the one that had previously registered as imported) now froze. Both "freezing" culprit clips were of average size compared to the rest. I am not sure about audio settings because I do not adjust anything that complex when recording.
THEN, I tried to use FCE to import the same clips. FCE does not even detect my camera.
I did try to unplug all other external devices too. No luck.
I have never installed any drivers for the camera. It seemed to work for a little, before this freezing behavior. Is there typically software needed to simply import to a app like iMovie or FCE? I didn't think so, but really cannot think of another troubleshooting angle.

Similar Messages

  • Problem with iTunes compatability with iMovie and iPhoto

    I purchased some music from the iTunes music store and wanted to use that music in a homemade DVD I made. I also have tried using the purchased music when I play a slideshow in iPhoto. In both instances, an error window popped up saying that I needed to launch iTunes and authorize the computer to play the song... Well I bougth the music on the same computer and it is authorized. I typed in the authorization anyways and then after that iMovie and iPhoto both pop up with an error saying that it can't use the file.
    Thinking it might just be one song file... I have tried this with many purchased song. I have had the same problem with all of the purchased songs I've tried.
    Are some purchased songs not compatable with the iLife applications? How can I fix this problem? I'm running iLife 05 and I have installed all of the updates, including the most recent...
    iTunes 6.0.2
    iPhoto 5.0.4
    iMovie HD 5.0.2

    Do you need to update Quicktime as well?

  • I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

    I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

    Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty.  That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu. 
    Click to view full size
    If there is an item in there drag it out.
    OT

  • I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably pri

    I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
    Thanks in advance for any suggestions.

    I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
    Thanks in advance for any suggestions.

  • I need to record a webinar; can that be done with imovie and if so, how?

    I need to record a webinar; can that be done with imovie and if so, how?

    If you want to record a Webinar, you will probably need screen capture software. Every recent Mac comes with QuickTime Player X, which will do this. Just click FIle/New Screen Recording. Then click on the red button to start recording.

  • I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?

    I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?

    you should never (ab)use a designated backup-setup for 'ordinairy' storage tasks.
    plus, the wireless connection to TC is too slow for iMovie.
    purchase any ext. usb-harddrive, 500Gigs starting at 50$ ...
    you HAVE to follow advice given here:
    http://help.apple.com/imovie/#mov3ac6d42c

  • Will compressor work with imovie and vesa versa?

    I am needing to compress a large file, but I only have imovie to work with for editing because final cut pro is so expensive.  Will compressor 4 play nice with imovie and will imovie work with compressor 4?  Thank you

    That's correct. I don;t believe you need a compression program to do what you want. I had to look up the export options for the new iMovie because my versions are older. There is a File choice in the Share menu which gives you a custom settings option. From that a you can adjust the bitrate to your requirements for the Web. For example, a preset that I use often is 720p # 8 bits per second.
    Good luck.
    Russ
    PS: BTW, I was impressed by what I saw of the new iMovie; for example I didn't realize that it supports Pro Res. 

  • I need to purchase a video camera that is compatible with iMovie and is under $1,000

    I need to purchase a video camera that is compatible with iMovie and is under $1,000.

    iMovie 11 - cameras supported:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    iMovie 9 - cameras supported:
    http://support.apple.com/kb/HT3290?viewlocale=en_US
    iMovie 8 Camcorders supported:
    http://support.apple.com/kb/HT1014

  • Lenovo Wireless Headset W770 compatibility with Linux and Mac

    Hi,  
    Can someone provide me information on Lenovo Wireless Headset W770 compatibility with Linux and Mac distributions.  On the product overview page under Software Requirements, only Windows is mentioned.  http://support.lenovo.com/en_US/downloads/detail.page?submit=true&componentID=1343112653906&DocID=PD...
    Please let me know if the headset can work with other distributions as well. 
    Thanks & Regards,
    Keya
    Solved!
    Go to Solution.

    I just received W770 and tried it on a PC and it worked. But when I plug the USB receiver in a macbook air (2011 MAC OS 10.6.8), it didn't work. The message I got is that MAC can't recognize the "keyboard" and asked me to press the shift button on the unrecognized keyboard- which I guess meant that the MAC treated the USB dongle as if it were a wireless keyboard of some sort. Anyway, would appreciate it if you could let me know how to make it work on MAC. The previous statement saying that it would work on any Lenovo machine regardless of OS is kinda of unclear - do you mean that it would also work on lenovo running MAC OS (is there any Lenovo running Mac OS?). Thanks.

  • Capturing with iMovie and importing into fce 4

    Hi, everytime I try to capture mini dv footage from my Panasonic camcorder using final cut express, the transfer/capture crashes.
    However, capturing using iMovie 08 gives me no problems at all.
    Before I spend more time looking into the errors, if I capture using iMovie 08 and then import that into fce 4, am I losing any audio / video quality? I read somewhere that iMovie works off raw dv files - is this what would get imported into fce?
    Note: I would import the iMovie project into fce and not be exporting first from iMovie and then importing into fce.
    thanks

    My video is on mini-DV. The camera I used to record was a panasonic ag-dvx100 PAL. I am using DV-PAL easy setup. I am playing back with a panasonic nv-ds30 camcorder (I rented the other one).
    I have now managed to get past the dropped frames - that seemed to have been the test tape. I am now using a different tape, the actual tape i used for the footage. Now everytime I capture (using either mark in/out or capture now) the capture stops with a locating timecode and then breaks. I can't seem to capture it all in one go. This scene when I shot it was a single scene so there were no stops/pauses during the recording.
    There seemed to be some discussion on this in the thread (http://discussions.apple.com/thread.jspa?messageID=4183209#4183209) but that was a different camera.
    any help would be great.

  • Canon Legria HF M406 Compatable with imovie?

    Hi!
    If someone could give me some basic advice it would be very useful. I am looking at buying an HD video camera and would like it to work as seemlessly as possible with apple and iMovie. Will iMovie import video directly from a Canon Legria HF M406? My other chioce of camera is the Panasonic HDC-SD90, and as far as a i know this works well with iMovie, am i correct?
    Thanks in advance,
    Nina.

    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    Above is Apple's list of compatible camcorders. The HFM41 is listed, so your camcorder should work fine.
    That is, if you have iMovie 11. It records in AVCHD so if you are using Imovie 06 there would be a problem. The panasonic is also a fine camcorder.
    So both camcorders seem to be ok for iMovie 09-11.
    You will, of course, need to make your decision based on cost and what you are using them for. I have found that for basic uploading to the web, say YouTube, any modern camcorder pretty much works.
    Hugh

  • Canon Legria HF20 - Compatibility with iMovie

    I have just ordered a Canon Legria HF20 camcorder. However, I have a concern.
    I just checked Apple's offical list of iMovie 09 compatible camcorders, and the PAL version isn't listed as a compatible camcorder. However, the NTSC version is, which is called the Cannon Vixia HF20. I am not sure if the reason why the PAL version isn't listed is just because they haven't got around to testing it.
    Can anyone confirm whether the HF20 works with iMovie? Am I safe to assume that if the NTSC version is compatible, then the PAL version will also be compatible

    See:
    http://discussions.apple.com/thread.jspa?threadID=2192709&tstart=0

  • URGENT HELP IS NEEDED WITH IMOVIE and MY SONY HD CAMERA HDR XR100E

    Hi there Fellow Mac Users.
    ok heres the situation..
    i bought the brand new sony HDR xr100E Video camera and as soon as i connetced it a few weeks back to my Apple Mac IMOVIE opened automatically and i was able to edit the movie, add sound, titles etc.
    Now last week there was a IMOVIE Update launched via software update and i downloaded it and now since then my Sony Cameara does not work with IMOVIE as imovie does not recognise it any more.
    when ever you go to the option to import from cameara it does not find the camera but instead it opens the I sight Camera on the Macbook.
    i have uninstalled the operating system, reinstalled, i have uninstalled the imovie application, reinstalled and still nothing.
    Can some one , anyone please help me ASAP im desperate.. ow and PS has anyone else exeprienced this same issue since the Upgrade?

    Thanks. What we will be using it for is mainly videoing children and family and we would like the 1080 HD but not necessarily hooked on the tape system. A hydrid might be something... like the BD and HDD. I found the Sony autofocus a bit slow at times which we would like to improve and we would like to have something that easily allow some pre-editing before getting to the FCE (I mean deleting unwanted clips etc). Also preferably not too large and heavy...
    Hope that makes the advise easier. Thanks again.

  • Camcorders Compatable with iMovie '09

    Good Day, All;
    I'm in the market for a camcorder, and based on forums here and there I am steering away from Sony and JVC for some known problems communicating with iMovie.
    As of now I have it narrowed down to a Panasonic HDCTM20K and a Cannon HF200. I see both claim to be good to go with iMovie '09, yet some people still seem to be having difficulties.
    Any comments would be most appreciated.
    Cheers.

    In my experience, Sony, Panasonic and Canon are all solid choices.
    I prefer the SDHC card models. Some people prefer the hard disk models. Stay away from models that record to DVD.
    [Pick one off this list|http://support.apple.com/kb/HT3290]
    I will stay away from recommending specific models, because the last one I bought was 2 years ago.
    If you see a lot of problems with Sony on the boards, that is probably an artifact of their huge market share rather than any inherent problem. In my experience, JVC and Samsung have been much more problematic, but they may be getting better.

  • Photo montage software that integrates well with iMovie and iPhoto?

    Hello,
    I need to do more complex photo montages that what iPhoto slideshow and iMovie has to offer. Does anyone have any recommendations for a software that integrates with the iLife software easily so it's fairly seamless? I need to produce professional-quality photo montages (ideally using photos and video, but I can pull the video in with iMovie or FCE after I do the photo section if I need to do so).
    Thanks for your recommendations!
    Alexa

    Do you need to update Quicktime as well?

Maybe you are looking for

  • [SOLVED] Two finger scroll stopped working

    Since some update of the last days the two finger vertical scroll of my touchpad stopped working. I have created a file with the configuratire which  be found here: https://wiki.archlinux.org/index.php/To - ed_options  but it does not work. With xinp

  • Imac 27inch custom built flicker screen solution??

    Dear friends and apple support team, i have imac 27 inch custom built and it have the same issue with screen flickering and the local supplier change the machine with a new one and after using the new machine fir one day only the same issue has been

  • F.27 Generate one statement for items posted in several company codes

    Have a customer extended to several company codes. This customer has open AR line items in several company codes. Client wants to generate a statement that includes all AR line items. (Cross company code Statement) I found a place in config for defin

  • Combination Chart using APEX

    Is it possible to develop a combination chart (say a stacked bar chart + line chart) on the same chart using APEX? I have a requirement where standard deviation needs to be on line chart connecting through bars. Thanks R

  • HFM 9.3.1.04 Patch

    Where will I get the HFM 9.3.1.04 patch and how will this be updated. What are the steps to update HFM 9.3.1 to 9.3.1.04? Thank you.