Canon Digital Camera Disk for mac.

I loaded the Solution Disk Ver. 3.0 for our new Canon Camera into my macbook yesterday, We loaded
some pictures out of the camera into the computer and printed successfully. Later, when I turned the
computer back on, none of the programs would open even mail or safari. I deleted a lot of duplicate
pix and old Emails it took about an hour to empty the trash. Then I turned it off using the power
button, waited a minute and turned it back on. It is functioning, but doesn't have the speed, and
sometimes I get the little rainbow twirly thing where my cursor is, So what do I do?
annieoakley43

When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
Do I need this software?
Probably not - exactly what about it do you want?
Can I just download the pictures to my Mac without using the Canon software?
Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
LN

Similar Messages

Canon digital camera & os 10.4

I just purchased a canon eos digital camera and after spending some time learning the camera, etc... installed the canon software for transfering images from camera to powerbook g4...
when I tried to transfer images using canon's camera window I kept getting the message that it could not detect the camera.
after trying this several times and going through the usually checks to see if the camera was set-up correctly... I went to canon's site and:
"For now, Canon is not claiming compatibility with Mac OS X 10.4"...
does anyone know how to transfer images from a canon digital camera to a mac with os 10.4

Don't know about the EOS, but I use Image Capture to
transfer images from my Canon PowerShot S50. Try
launching Image Capture, then go to the Preferences,
General, and select "When a camera is connected, open
Image Capture." Quit Image Capture, and plug-in the
camera and see if Image Capture launches.
Francine
Schwieder
That's exactly what I'm used to doing in the old G3/Jaguar system. At my first try in doing the same thing in the G5/Tiger version, I had the following happen:
A. Plugged in first to one of the USB 2.0 ports. The system didn't react at all, but the display on the Canon went dark, which it had never done before when connecting. Repeated that sequence several times, but Image Capture never launched.
B. Tried plugging into a 1.1 port (on the keyboard). Now the image remains on/powered, but the app never launches. Instead, I get the "No ... capture device connected ..." splashscreen.
C. That seems to be the case, at least as far as I know how to determine it with System Profiler. I can never get any indication that the OS is seeing the camera there at all.
Any ideas on what has gone/is going on, and what I can do about it? I'm really just very surprised that it's not simply working as it should. TIA for any inputs or assistance.
(N.B. I still have the G3 and am considering powering it back up to see if the Canon still works there; I suspect it will, though)

HT3606 I have a MacBook with OS 10.4.11 and need OS 10.5 or newer Software for my Canon Digital camera--- any suggestions?

I have a MacBook with OS 10.4.11 and need OS 10.5 or newer Software for my Canon Digital camera--- any suggestions?

Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay

Does Apple have fix for the Canon Digital Camera issue and 4.7 update??

Hi All,
does anyone have any info about a fix for the communication issues with canon digital cameras and PPC users who updated to 10.4.7?
I think it's sad that a machine peopole buy to use for graphics can no longer download picture from a digital camera after up-daing software, as Apple recommends........
Alos, what is the kernel fix....?? any ideas?
Thanks in advance,
Bill Anderson

Hi,
What apple are you running?
I have a Digital Rebel XT with PPC G4 with update 10.4.7. And many users with PPC and the update are having the same issue.
Also, if apple would get their updates to the other groups (e.g CANON), then maybe these issues would not come up, but Canon told me "We just can not keep up with Apple updates, and we got the intel versions working, but PPC have toubles..."
OS updates should not affect peripherials such as digital cameras, and the computer does recongize the camera on the USB connection.
thanks,
Bill Anderson

Canon digital camera utilities

I've just got a new laptop with OS X 10.6 on which replaces my old one with OS X 10.4. I need to install the software for the Canon digital cameras but can only find 'updater' downloads for 10.6 which rely on you having the original installed on your computer. I have tried installing the software from the original discs but the computer doesn't recognise the CD, despite it spinning.
Does anyone know of anywhere I can download the full bundle of software that comes with Canon cameras? I have been to the Canon website, but that is where the 'updater' software is.
Any help would be much appreciated!
Thanks!

I have Canon Camera Utilities running updated on my Snow Leopard. I moved everything over from my previous computer(s) using Migration Assistant and then Setup Assistant on the first bootup of the new Mac. I didn't need to re-install from the Canon Disk, so I don't have any experience doing it that way. Not sure, but it's possible that Disk might be too old for the new Mac to read properly. I know mine was from the 10.3 Panther era. Perhaps if you make sure you have Rosetta installed, the new Mac will then be able to read that Disk which was probably written for PPC Macs.
One possibility for a workaround would be to connect the two Macs together in Firewire Target Disk Mode and move that Canon Folder in Applications in its entirety over to the new Mac. I'm not sure of this, but there may not be any related files installed in places other than your Home Folder Library, and any of these should be recreated when you install, update and run the Application. I just had a very quick look and didn't see anything. So, moving over just that Folder which contains the Apps might be sufficient. (Make sure you have Rosetta installed, since the old Canon App will probably be PPC. The new Mac will be Intel.)
Directions for Firewire Target.
http://support.apple.com/kb/HT1661
(The new laptop has Firewire 800, which uses a 9 pin Firewire cable and the old Mac may be Firewire 400 which uses a 6 pin cable, so you'll need a 9 to 6 pin cable. Check first to see what the Ports look like. The old 6 pin port is kind of rectangular and curved at one end. The new 9 pin is kind of square.)
The other possibility would be if you're in the US, you could call 1-800-OKCANON and ask for tech support for this issue.

Canon digital camera integration with Labview

hi,
i need to integrate canon digital camera with labview.
i have applied for the SDK from canon , and waiting for the
reply from them. i have got a liitle control of the camera from the
dll from PS remote from http://www.breezesys.com/PSRemote/
but not able to grab the images to labview ,
if any one has worked on similar applications kindly help
thanks and regards,
sundar.

hi there,
there's a function SetOutputPath(path) where you can specify the path where the driver of the camera saves the pictures. for more information see the SDK docs. after the pictures have been saved to disk you can read the files with the LV-VIs from the "Graphics & Sound" palette. there are some examples shipped with LV of how to read image files.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Does "RAW files from Canon digital cameras cannot be downloaded" MATTER??

Need to buy new camera to use with my G5 and iPHoto 5. I desire (1) affordability, (2) more optical zoom than what I've had in past (want to move from 4x to 6x), and (3) compatible with my G5.
I've had 2 canon powershost (my last, the 570, but a kid dropped it). Easy to use. So maybe simliar, or something nicer.
Been studying the Canon web site about their various cameras. For the above reasons I like thePowerShot SX100 IS, about $240. 6x optical zoom.
HOWEVER, in the MAC OSX compatibility section at Canon it has this quote:
* Mac OS X 10.1 and newer come with Image Capture drivers that support most of Canon's digital cameras with USB interfaces. When a compatible camera is connected to a compatible Mac computer running OS X 10.1 and newer, the computer detects the camera and automatically launches Image Capture. This Apple program allows JPEG images in the camera to be downloaded to the Macintosh. NOTE: RAW files from Canon digital cameras cannot be downloaded in OS X via Image Capture. We suggest the use of File Viewer Utility or an external card reader. Also, movie files shot with PowerShot cameras cannot be downloaded in OS X via Image Capture or iPhoto. We suggest the use of ImageBrowser or an external card reader.
Additionally, Image Capture can access JPEG images directly from a CompactFlash card using an OS X-compatible card reader or using a PC Card Adapter in the PC Card slot of an Apple PowerBook.**
This line caught me confused: *RAW files from Canon digital cameras cannot be downloaded*
In the past, I just plugged in the Canon Camera, and iPhoto 5 opened, and I h appily downloaded the picts and off and away I was.
Will this still happen??? And if I'm not getting the "RAW" picts (whatever that is), but just the JPEGS I'm used to, am I not getting "all" the picts, or the best that my camera could be given me for eventually printing?
Am I worrying about nothing?
Finally, any camera suggestions? Under $300 , super picts, 5-10x zoom, and friendly with my Mac
Thanks
JON

Jon
You know, because you ask the question, I'll guess that it won't really matter to you...
Every camera shoots RAW - that's the total information that the sensor on the camera sees, but mid- and lower end cameras process this RAW data into an easy to use format such as jpegs.
Many (but not all) Pros demand that the camera provide all the data to the computer, so that the photographer can process the images him/her self. For most casual and family users this is not an issue. For the serious hobbyist and the Pro it might well be.
For more on Raw have a look at this:
http://en.wikipedia.org/wiki/Rawimageformat
Btw, later versions of iPhoto do work with Some Raw formats.
As to cameras:
I used a Canon S2 IS for a couple of years and found it really good. There's and S3 and an S5 now too. Currently I'm using a Panasonic FZ8. I really like it.
Regards
TD

How do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled.

I just discovered my videos from my Canon digital camera are not compatible with imovie or idvd so I need new software. Any ideas?

Hi. I just discovered my videos from my Canon digital camera are not compatible with imovie or idvd (I'm very disappointed about that.) The photos are stored in my iphoto and I can burn a dvd using idvd but there is no audio So.... I need new software. I have a Mac OS X 10.5.8 and my digital still camera is the Canon Cybershot These are home movies of my kids and the viedeos are precious. Thanks in advance!

Canon Cybershot
I can't trace a camera of that name. All that comes up is either the Sony Cybershot or the Canon Powershot!
Please confirm excactly what camera you have, and what version of iMovie.

I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

Generally, it's ok to install on two machines as long as they are both yours and you only use one version at a time.
BTW, this is the forum for Adobe Contribute.

How do I uninstall Adobe Digital Editions 3 (for Mac)???

Dear kind, knowledgable Adobe Staff member-
As a user of SEVERAL Adobe products, I am really NOT loving the fact that there is NO CLEAR answer that I can find here (OR even in doing a Google search) for how to completely REMOVE/UNINSTALL Adobe Digital Editions 3 (for Mac)...and there are a couple/few UNanswered Adobe Communities posts (such as this one) asking this SAME question!
If you're going to create an installer for the MacOS platform (which does NOT have the built-in Winblows uninstall "feature"), then PLEASE DO either include a uninstaller tool (either installed during the install process, built into the installer as an option, OR have clear, official, and easily accessible step-by-step instructions on how to do this!
You've lost ANY shot of my returning to ADE software by not having these features...please do help me re-instill some "faith" in your company's responsiveness to the current LACK of support that I am experiencing in attempting to remove this unwanted software from my computer!
Cordially,
Albe Sure

I DO very much appreciate the swift effort at attempting to help...but that is NOT a working resolution for me.
1) As I was very clear on in my OP and title, I am seeking assistance with uninstalling Adobe Digital Editions 3 (for Mac)...
2) BECAUSE Adobe is distributing this software as an "installer", I am not even going to begin to trust simply deleting the Adobe Digital Editions 3 app from my applications folder...no way! I want to thoroughly remove ALL TRACES of this application (EVERYTHING that was installed by the installer, or later by the application itself, onto my computer. Simply deleting the app fro my my applications folder will NOT be sufficient to achieve this goal.
3) As the name would suggest (and the step-by-step instructions would collaborate, the CC Cleaner Tool is only for Creative Cloud installation and removal problems (and to the very best of my knowledge, Adobe Digital Editions is certainly NOT a CC program.)
"A" for effort, but not so much on providing a relevant/working Adobe Digital Editions 3 (for Mac OS) uninstall/removal suggestion(s)...STILL looking for a working solution!

New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?

New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?

Hi Erwin,
Please go through the below forum link and check.
https://forums.adobe.com/thread/1079210
Regards,
Anand

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
It does not look like the Canon driver has change from Mavericks to Yosemite.
If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
If you have a new or clean install of Yosemite, see > OS X Mavericks: Set up a printer

Is There a Camera Utility for Mac?

Is There a Camera Utility for Mac? If So, can you Give me a Link?

Well, I have my cameras and NVR: The first utility for iPad iOS I have tried does work, at least for one camera, have not tried with the rest. It is called M-sight. I have tried from the home network only. JA

Belkin 'Digital Camera link for iPod'

I got a Belkin 'Digital Camera link for iPod' for $20. looked like a good bargain but dosen't work on my iPod.
Any idea if this belkin device supports 5G iPods. It was actually designed for the 3G iPods with photo.
I have a Sony DSC-S80 with PTP so dosen't look like the problem is with my camera.
Windows XP Pro

I don’t see why it wouldn’t but it says it is for 3G iPod and you said it doesn’t work.
Any idea if this belkin device supports 5G iPods
No, it does not support the 5G, based upon it does not work and it is not designed for the 5G.

Canon Digital Camera Disk for mac.

Similar Messages

Maybe you are looking for