Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available. I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual. Sadly I just get a message saying it's not compatible with the operating system. I've tried inserting the memory card into the mac to and it doesn't seem to see it. Can anyone help please?

Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
What happens when you try to import photos using Image Capture or iPhoto?
Can you take a screenshot of the error message?
I always prefer and recommend using memory card import over using the camera.

Similar Messages

Very good day someone could tell me that multifunction printers are compatible with the operating system mavericks

very good day someone could tell me that multifunction printers are compatible with the operating system mavericks, please i need help...

Walte_R wrote:
very good day someone could tell me that multifunction printers are compatible with the operating system mavericks, please i need help...
Yes, mine works fine also.
Pete

HT4757 I have a Nikon CoolPix P80. Am I correct that this is simply not a sophisticated enough model to be covered by the Digital Camera Raw Compatibility Updates? It is never listed. Thank you.

I have a Nikon CoolPix P80. Am I correct that this is simply not a sophisticated enough model to require the Digital Camera Raw Compatibility Updates? It is never listed. Thank you.

Raw is the raw data from the camera sensor, before it is turned into a jpg. From what I can tell looking at the specs for the P80, it does not have Raw mode. Therefore it will not show up in the compatibility table.
http://www.nikonusa.com/Nikon-Products/Product-Archive/Compact-Digital-Cameras/2 6114/COOLPIX-P80.html#tab-ProductDetail-ProductTabs-TechSpecs
Storage System
JPEG: JPEG-baseline-compliant; can be selected from Size priority and Optimal quality
AVI
WAV

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

MP has rejected a policy request from GUID:27935EC8-95F1-4104-A613-E72D2A9764E0 because it was not approved. The operating system reported error 2147942405: Access is denied.

Why Microsoft doesn't have correct fix to run automatically. How many years we need to cry with same error again n again?
Does any one have correct solution which will fix permanently while running more than 4000 systems in our environment
Manual stuff isn't easy. Pls provide permanent fix?
MP has rejected a policy request from GUID:27935EC8-95F1-4104-A613-E72D2A9764E0 because it was not approved. The operating system reported error 2147942405: Access is denied.

This isn't a bug to fix. This is by design. Clients must be approved to be managed. Thus, only your configuration or expectations must be fixed. To correct your configuration, see the link Henrik posted. To correct your expectations, read the content linked
by Henrik.
Jason | http://blog.configmgrftw.com

Camera not in list for Digital Camera RAW Compatibility Update 3.11

Do I need this update if my camera isn't in the list of supported cameras?

45 views and no replies? Isn't there anyone that can answer if I need this update or not or is my question not clear? Does anyone else have a similar question relating to the Digital Camera Raw compatibility update 3.11?

Ora 8i: Working with the operating system

I' m working with NT 4.0 and Oracle 8i and I need to do some calls to the operating systems (such us remove directories adn copy a file into another) from PL-SQL.
Is it possible??? I need an aswer as soon as possible.
Quite a lot of thanks!!
Juli.

Hi
You can write external procedure on C and call it from PL/SQL code. Maybe you can use also DBMS_PIPE, but I never used it.
Regards
null

Working with the operating system

I' m working with NT 4.0 and I need to do some calls to the operating systems (such us remove directories adn copy a file into another) from PL-SQL.
Is it possible??? I need an aswer as soon as possible.
Quite a lot of thanks!!
Juli.

Hi
You can write external procedure on C and call it from PL/SQL code. Maybe you can use also DBMS_PIPE, but I never used it.
Regards
null

Why does my imac camera not work with maverick operating system

i updated my software to 10.9.2 yesterday and facetime and photobooth dont recognize my built in camera on my imac

Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

How do i plot with the operating system time in one plot and show lines between cursors in another using the same XY graph?

I am having some trouble graphing two plots at once. One plot is to show the current temperature inside a chamber as a function of time. I am trying to pick the current time and temperature each second and plot it with each point being connected by a line. I am able to show a moving, blinking dot each second but I can't figure out how to develop an actual line with these dots. To make matters worse, the blinking dot is back in the year 1903. I understand that it uses seconds elapsed since 1903, and am trying to find out how to graph the current temperature with the system time.
The second plot is just 5 moveable cursors that are to be connected by a line. I am able to move the cursors and retrieve the position information, but I can't make a line between them.
I have attached my main .vi, though you may have to pick the graphing part off to have it work for you.
Attachments:
Main Module Chamber Testing I_O every 30 sec.vi ‏288 KB

You're not creating the XY graph data correctly. I've attached an example with a couple of simple XY Graphs. One is using a couple of shift registers to hold the spearate x and y arrays. I think this is what you were trying to do. The other one uses a VI from the shipping examples called XY Chart. It makes an XY Grpah act like a chart. I've also shown the correct way to display current time.Message Edited by Dennis Knutson on 05-12-2005 03:51 PM
Attachments:
XY Graph.vi ‏41 KB

Keyboard not working with new operating system

I just updated my iphone 4s to the new operating system and the keyboarding is lagging. Any suggestions?

call the facility that did the repair and let them know. They need to stand by their work.

Why won't msword open on my macpro says it is not supported and the operating system is OS x

Why won't MS word open on my MacPro. Operating system is OS X (OS 10.6.8) and computer tells me the application is not supported?

Are you sure you're running 10.6.8 and not Lion (10.7)? That sounds like what happens when you try to launch a Motorola (G4/G5) app on an Intel system running Lion since they removed the emulation layer.

Display not working with new operating system

I recently installed OS X version 10.8.2 and now my large apple display will not work with the MacAir. Anyone know how to fix this?

Return to place of purchase while in your 14 days from date of purchase window. You may have a defective monitor or GPU.

Is there a problem with the operating system when downloading Rapport

I have downloaded Rapport onto my iMac and now my computer will not stay logged in. I can sign in to my user account but it just logs out about 20 seconds later.

Hi Elite idiot,
We’re sorry you experienced issues with Rapport. Our Technical Support Team is available 24/7 via mail or live chat and would be happy to assist you with any difficulty you encounter. Please contact us at http://www.trusteer.com/support/submit-ticket
Ayala,
Trusteer Technical Support

My MBP does not boot in the operating system. How can I get it to work again?

I've tried rebooting from the OS DVD but it does not do anything. Now, I can't even get the DVD out to try the MBP install disks. Is there anyway to get this working again?

If it's not an Airprint enabled printer, you can not natively through your iPad. BUT, there are apps you can purchase in the App Store, like Print Central ($9), which is what I use myself and works well for my needs.

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

Similar Messages

Maybe you are looking for