Canon EOS 1d MkII will not connect properly

I am running an up to date version (1.1.1) but all that happens is that the camera keeps connenting and disconnecting literally every second. Does anyone else have this problem or know how to solve it? My camera is running on AC power so that is not the problem. Will this software ever work properly??

I shoot with 1Ds Mark II's. The camera USB port is for direct printing (not downloading) and the digital/firewire port is for shooting tethered or downloading.
You should make sure that you have the latest Canon Software, DPP v2.1.1, and EOS Utility.
When you are connected be sure not to turn on the camera's display since that will cut off the connection with a computer temporarily.
I do use the fw cable to shoot tethered to DPP with my cameras. I've never used it to download direct from the camera. Myself and most pro's I know use card readers which tend to be faster. I can confirm that a 1Ds Mark II CF card in a card reader shows up with no problem in Aperture.
Apple has a help document on this that is very accurate:
http://docs.info.apple.com/article.html?artnum=303189
It recommends a card reader and if you read the last couple of lines it sounds like downloading from the camera is not necessarily supported with all models.

Similar Messages

My Canon EOS Rebel T4i will not operate with a new battery. What could cause this problem?

While take pictures with my Canon EOS Rebel T4i camera it died. I assumed it was a dead battery. Upon charging the battery it would take just a few pictures and die again. I purchased a new cannon battery and fully charged it and now the camera will not even come on. What could cause this?

Sounds like the micro-switch in either the battery door or memory card door is barely making contact. If either of those two doors are opened the camera will immediatley power off. The micro-switch is in the door frame. The door itself has a tab which pushes on the switch.

My ipod touch 5th generation will not connect properly to charger. I have tried on different cords but it will not show that it is charging.

My ipod touch 5th generation will not charge when connected to charging cord. I have tried two different cords with same result. It will charge for a second then show not charging. Any suggestions?

- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

My iPhone 3Gs, after update to iOs 5.1, will not connect properly to the Alpine Bluetooth.

Now My iPhone will send only phonebook via Bluetooth, but not dialed calls or missed calls. Please help me!

touch me wrote:
it says ICCID: unknown
Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

I purchased the canon mg3520 and it will not connect with my Mac OS 10.5.8, don't want 10.6.8?

I don't want to update my Mac to os10.6.8, want to keep 10.5.8, can I use othe mg3000 series compatible printer drivers?

Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
http://www.mozilla.com/en-US/firefox/all-older.html

PLEASE HELP! ETHERNET CABLE IS NOT CONNECTING PROPERLY WITH FIOS ROUTER

I recently purchased a time capsule to use in conjunction with my mac. When I am prompted to connect the ethernet cable from the lan port on my fios router to the wan port on the tc, the cable will not connect properly to the lan port on the tc. If I connect it from the lan on the fios router to the lan on the tc the green indicator lights up to indicate a connection but this does not help the wan port situation. I am able to locate the network I created from my mac but this tc network is not connected to the internet as indicated by the amber blinking light on the front of the tc. Also since creating this non working tc network, my fios signal is almost non existant! I am new to all of this so any help at all would be greatly appreciated!!!

Don't worry about the cable. For now.
Set the TC to bridge mode.. In bridge there is no wan port.. so you can use any port on the TC.
Test with the TC plugged in FIOS.. use in turn all the ports to see if it will work.
Do not change any setting but bridge the TC from default.. ie do not set extend wireless.. that will totally foul it up. Do not use join wireless, that will triple foul it up. Absolute default.. set TC to bridge... plug into the FIOS.. ethernet to any port that the light goes on.
Do a snapshot of the TC setup from airport utility and post.

Will there be a RAW plugin for Elements 12 supporting the Canon EOS 7D MkII - or when will the DNG converter for this be available?

I've just bought a Canon EOS 7D MkII but cannot open the RAW files in Elements 12. I also can't use the latest DNG Converter to convert them - will either option become available and if yes how long is it likely to take please?
Thanks, Sarah

Hi,
The Canon 7D Mk II is currently not supported by any version of camera raw.
It is expected that Camera raw 8.7 will include support and we are hoping that it will be released soon.
PSE 12 has ceased to be updated - you will either need to update to PSE 13 or use the DNG 8.7 converter (when it becomes available) to convert the CR2 files to DNG files - PSE 12 will then beable to use the DNG files.
Brian

Does anyone know when Aperture will support RAW files from the Canon Eos 7D mkii?

Does anyone know when Aperture will support RAW files from the Canon Eos 7D mkii?

Only Apple knows. The never announce upcoming RAW support in advance, sorry. And if anybody knew, it would not be allowed to post this information here.

My iPhone 4S will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

My iPhone will
not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

Try resetting your network settings.
Settings>Genenal>Reset>Reset Network Settings.

CANNOT OPEN RAW FILES USING NEW CANON EOS 1D MKIII WITH PHOTOSHOP ELEMENTS 5

Hi, I have recently taken a number of RAW shots with my new Canon EOS 1D MKIII and have found that I am unable to import them into Photoshop Elements version 5 (using Microsoft Windows). Comments generated are: "the file is a format that cannot be included in the organiser" and "cannot open because it is the wrong type of file". The RAW file extension is .CR2 and I have been able to open these type of files taken on my older, and much cheaper, Canon 350D. I have spent hours considering different options but to no effect and am completely baffled. Do the two cameras produce different types of RAW files? Notably, the files do import into the Canon software 'Digital Photo Professional' but I want to undertake the more versatile manipulation in Photoshop Elements. I have managed to become even more baffled about Digital Negative ('DNG') files and wonder if there is some kind of converter I need. Would the solution be to purchase a more advanced Photoshop package like CS2? OR .......... do I need an 'Adobe Camera RAW' update? I have struggled to find the latest version for Photoshop Elements 5 to suit my Canon EOS 1D MKIII. There appears to be a 4.3.1 update but this only applies to Version CS3. Help!

You probably haven't had anyone respond to your question because it has been asked and answered so many times. However, I will try once again.
Adobe Camera Raw must have a profile for every model of every camera for which it supports the camera's raw format. It is not a matter of just supporting a file type such as your CR2 files. ACR needs to know specifically what model you are using. This is a problem that has been created by the different camera makers. They are the ones who are creating these proprietary raw formats. No, they do not cooperate with Adobe. That is why Adobe has to wait for a camera to be available, then obtain a raw file from that camera, and then create the profile so that ACR will recognize that camera. That is also why ACR is updated about four times each year, to provide support for newly released cameras.
In an attempt to create a "common" raw file format, Adobe has developed the DNG (Digital negative) file format. Adobe is providing a free DNG converter. You always want to download and use the latest version of the DNG converter because it will be the one that supports the most cameras. The DNG converter creates a digital negative copy of your raw image. It contains all of the original raw image data. The image data is precisely the same data that was in the original raw image. The difference is that the DNG file has a "standardized" file header that stores as much of the metadata as possible about the image. Metadata is the information that records the changes that you make to your image when you edit it. Some of the image data is proprietary, and is therefore not available to Adobe. Obviously, that information simply has to be ignored by ACR. There are no XMP files associated with the DNG files. The information is stored within the DNG file itself so the XMP sidecar file is not necessary.
If you decide to go the DNG route you want to make sure you are using the latest version of the DNG converter. It will convert raw files from the largest number of cameras. Those DNG files can be opened by any version of Camera Raw from version 2.4 onward. Consequently, someone who is still using Photoshop CS still has the capability of working on their raw files even if they have the most recent up to date camera.
Photoshop Elements will utilize ACR 4.3.1 and any subsequent updates to the ACR 4.x releases. Judging from past experience, there should be another release soon. No one knows for sure. These releases are never announced ahead of time. ACR is not as robust in Photoshop Elements as it is in Photoshop CS3. It is the same plug-in, but a number of options are not available. It will support the same cameras, however.
You don't need to worry about matching the DNG converter version number to your working version of ACR. The only relationship is that matching version numbers will support the same set of cameras. But the DNG files that are created can be used in any version of ACR from 2.4 onward.
Anyone who is involved with digital photography and shooting raw has become a victim of the arrogance of the camera makers. The camera makers want to protect their proprietary format, and they want to promote the use of their software. Some of that software has to be purchased, so it is another way for them to make money. Until such time as everyone agrees on a common raw format, the photographers are the ones who are at the mercy of the camera makers. And there will be a continual ongoing updating process that we will have to wait for.

How do I get Adobe Camera Raw (ACR) support for my new Canon EOS 7D mkii.

I purchased the new Canon EOS 7D mkii in early November. I tried opening the raw files in both the latest Creative Cloud versions of Photoshop and Lightroom. I found that Adobe Camera Raw, both the current versions and ACR 8.7 beta/release candidate, did not support this camera. I know one exists because dpreview reviewed the pre-relase version of this camera in mid-October showing images processed with an unreleased version of ACR?
How do I get this early unreleased version of ACR for this camera?

Canon Eos 7D Mark ii was launched after we released ACR 8.7 RC. So, that’s the reason it is not included in the RC version. However, it is on our radar and hoping to add it in an upcoming update itself.
As soon as it is available, it will be updated in the below article.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
~ Arpit

Camera Raw for Elements 10 for the Canon EOS 7D MkII? Downloading

Is there a "Camera Raw" for "Elements 10" for the "Canon EOS 7D MkII"?
If so could I please have the link to where I can download it?
Thanks

Hi,
The Canon 7D Mk II is currently not supported by any version of camera raw.
It is expected that Camera raw 8.7 will include support and we are hoping that it will be released soon.
PSE 12 has ceased to be updated - you will either need to update to PSE 13 or use the DNG 8.7 converter (when it becomes available) to convert the CR2 files to DNG files - PSE 12 will then beable to use the DNG files.
Brian

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

My MacBook will not connect to the Internet, but all of my other devices connect perfectly.

I have a MacBook and it will not connect to the Internet. It connects to wifi, but then when I open Safari, the page does not load. I have tried forgetting the wifi network, deleting keychain passwords, and restarting the computer, but nothing has worked. Does anyone know what I can do to fix this?

Did you set DNS Server properly?
System Preferences -> Network -> Advance... -> DNS

Both my iphone 4s and my ipad3 will not connect to the server when trying to access my email account. Why, and how do I fix it.

Since 29/10/2012 my iphone 4s and more recently my ipad 3 will not connect to the server when trying to access my email account. All I get is an error message saying that 'cannot get mail, connection to the server failed' I hadnt changed any settings it just happened. I have since done a complete re-boot on the ipad but to no avail. Anybody got any suggestions?

No. Everything was working fine and then it wasn't. I hadn't changed any settings or switched either one off. When the phone stopped working properly I ignored it because I always have my ipad with me but that just sopped working properly and now I am stuffed. I have tried most solutions suggested on here even wiping the ipad clean and re-booting. I did this exactly the same way as when I first got it but still no joy. The same with the phone.

Canon EOS 1d MkII will not connect properly

Similar Messages

Maybe you are looking for