Canon EOS 350D does not see memory card--I've tried two different ones. Will not format--err 99

My EOS 350d has not worked since it was shipped to my daughter. Bought new memory card and camera still does not recognize that a card is in it. When connected to computer I could see card but it had 0 used memory and 0 memory available. Now it does not show at all. Using canon software get same response--no memory card. Have tried with two different memory cards. Even formatted one card on PC, still nothing. Any ideas what to try next--pins look like they are all in correct place.

Unfortunately, the Error 99 code is not a specific error code and can indicate a number of issues, such as battery power issues, shutter issues, etc. The more I looked into the 350D and memory card compatibility the more I think that may not be the issue. In all honesty, I'd contact Canon support as you may have to send your camera in for repairs.
Before doing that, though, I'd try this. Restart your camera, wait a few moments then set the camera's power to Off and remove the batteries. Open the memory card slot cover to make sure the memory card is securely set in the card slot, then reinsert the batteries and turn the power to On. Hopefully that will do the trick, and if not I'd update the firmware for the camera as a last resort and see if that rectifies the problem. If not, contact customer support.

Similar Messages

Curve 8250 - PC and Device Software Do Not See Memory Card

Curve 8250 (Unlocked), v5.0.0.1036 (Platform 5.2.0.104), no provider - no SIM card installed. 16 GB MicroSD card installed and formatted and shows total space at 14.9 GB. Phone sees the card and puts camera shots on it. Have Media Card Support On, Mass Storage Mode Support On and Auto Enable Mass Storage Mode When Connected Yes. When MicroSD is removed from phone and put is card reader, the format and files look fine. When connected by USB to computer, the BlackBerry Device Software shows the phone memory, but no MicroSD and Windows 7 Disk Management shows Disk 1 Removable 14.91 GB Online with assigned (D), but with format of RAW (always asks to format card)? Have tried everything I can find online with no success. Hopefully, this is not because no SIM card installed. Please let me know why I can’t see the MicroSD correctly when connected via USB to phone. Thanks.

Unfortunately, the Error 99 code is not a specific error code and can indicate a number of issues, such as battery power issues, shutter issues, etc. The more I looked into the 350D and memory card compatibility the more I think that may not be the issue. In all honesty, I'd contact Canon support as you may have to send your camera in for repairs.
Before doing that, though, I'd try this. Restart your camera, wait a few moments then set the camera's power to Off and remove the batteries. Open the memory card slot cover to make sure the memory card is securely set in the card slot, then reinsert the batteries and turn the power to On. Hopefully that will do the trick, and if not I'd update the firmware for the camera as a last resort and see if that rectifies the problem. If not, contact customer support.

So mad i cant get my credit card off my itunes so i can add a itunes card i have tried everything no one will help

help me please ! I have tried everything to get my credit card off the itunes no one will help

Just so you know, you can redeem iTunes cards without having to remove your credit card. If you want to remove the card, though, try redeeming the iTunes card and then go into your account information and see if the "none" option then appears in the Payment Method section. If not, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

What do I need to do to power off my Ipad. It has a message on the screen that it has not been backed up by icloud for two weeks and will not respond to anything.

I charged my Ipad last night and this morning there was a message from icloud that it has not been backed up for two weeks. I tried to click the ok but it will not respond. I cannot even power off the Ipad. Does anyone know what I should do?

A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons and await restart. No content will be affected.

Hi, help,computer froze in last 79 minutes of harry potter deathly hallows part 1 download. i resubmited code n of course now will not see it as a unused code which means it will not let me reenter it. please clear it for resubmittion .

help please, computer froze last 79min of installing harry potter deathly hallows part 1. need to have code cleared to resubmit or send new code if possible. purchased the movie from best buy today.

Go to iTunes -> Store -> Check for available downloads. It should show up there, ready to download again. This page has more help: http://www.apple.com/support/itunes/

PulseAudio does not see my card (and I have to use PulseAudio)

ALSA works fine.
To be specific, pavucontrol does not see my card (only sees my ATI HD5700 graphic card as HDMI output under "output")
Here's aplay -l:
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Card info
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Giga-byte Technology Device a002
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
Interesting thing that happens:
[bogdan@galaxy alsa]$ aplay -Dplughw:0,0 -fcd Front_Center.wav
aplay: main:660: audio open error: Device or resource busy
The reason I have to use PulseAudio is stupid skype that crashes on start without it installed.
Help?

Yep, that's the one I have installed. However it looks like the problem fixed itself. The sound now works, HOWEVER, I have a 5.1 system and only center, rears, and the sub works. Left and Right (main) don't. pavucontrol is set to 5.1 output. When I turn down the individual volumes of main left and main right, the center speaker is the one that actually is turned down. It's as if PulseAudio thinks that center speaker somehow represents both main left and right.

HT4106 Is the IPad connector kit compatible with the Canon Eos 350D digital camera, I can't get it to work. Comes up as device not supported

is the camera connector kit compatible with the Canon EOS 350D digital camera, as I can get it to work

Check what you've got 'Communications' set to on the camera's settings - it needs to be 'Print/PTP', not 'Normal' 'Normal' to 'PTP' :

Lightroom 4/5 does not recognize memory cards anymore

I signed up for the Creative Cloud $10 PS/LR deal earlier this week. Previously I had LR 4 (and PSE). I'm a longtime LR user. The first time I used LR5 was today. The problem I describe started happening in LR4 as soon as I downloaded CC, before LR5 was even installed, and is continuing to happen in LR5. I have (and have always had) the option checked for the import dialog box to pop up when a memory card is detected. That is no longer happening as of the CC download. If I click on "import", it does show my memory card; the dialog box just does not automatically pop up. When the memory card is highlighted on the top left of the import dialog box, it states that there are no photos. This happens with all 5 of my memory cards, so I feel confident it is not a memory card issue. If I go further down on the left side of the import dialog box, I can click on the drop down arrow for my memory card and it will bring up the folder that is on the card (where the photos actually are). If I highlight this folder, the photos show up and I am able to import them. At times, Lightroom sees photos on the card that are already imported but does not recognize them as duplicates, but not always. I have searched for answers on this but have not found anything that pertains to my situation. Can anyone tell me how to get my import dialog box to automatically open again when I insert a memory card? Thank you.
ETA: I am using a Mac running OSX 10.8.5.

The virtual keyword is classified as a "future reserved word". In the current AS3 language spec it does nothing, and can safely be removed.
From the help:
"There are also several identifiers that are sometimes referred to as future reserved words. These identifiers are not reserved by ActionScript 3.0, though some of them may be treated as keywords by software that incorporates ActionScript 3.0. You might be able to use many of these identifiers in your code, but Adobe recommends that you do not use them because they may appear as keywords in a subsequent version of the language."
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3_Flex/WS5b3ccc516d4fbf351e63e3d 118a9b90204-7f9b.html#WS5b3ccc516d4fbf351e63e3d118a9b90204-7f6e

Can't Find Or Acces My RAW Files ( Canon EOS 350D

I'm new to SLR Cameras.. I have a Canon EOS 350D So y decided to shoot in RAW. But i have problems and question. If you just go to the camera directory can you see the RAW images? And i cannot find my RAW files that i shot..in my camera i can see them but in Bridge CS3 and PS CS3 nothing...i've already downloaded the update Camera RAW 4. But Nothing So how to work with RAW.. Pls Help me..because i need to shoot again tommorrow so i'm short on time..
Raizen Albertsz,

I found some one with almost the same problem so i am going to change his words a little bit so that you can understand my problem.
I'd taken a few shots here and there this week in RAW + Large format, but wasn't able to find the RAW files. OK, I thought perhaps I was mistaken and didn't have the settings correct & didn't really take any RAW shots.
So I reformatted the 4GB Scandisk CF card (via the camera) and took more shots, all in RAW + Large. Going thru the camera display with Info turned on, I can verify that each one was indeed on RAW + Large. But I still can't find them.
I'm using a cable to connect my EOS Rebel XT (EOS 350D) to transfer the files to a selected folder on my pc. Opening that folder in Windows (I have Win XP)there are only the the JPGs in it. If i open Adobe Bridge CS3 or PS CS3 i would find only the JPGs. Where are my RAW .CR2 files going? I was under the impression they would be in the same folder as the JPG images, with same file number. So that i can see like a thumbnail or something.
I've downloaded the Camera RAW 4.4.1. Upgrade. I did what is written
To install with Adobe Creative Suite 3 or Photoshop CS3:
1. Exit Photoshop CS3.
2. Open My Computer.
3. Double-click Local Disk (C:).
4. Navigate to: (Please read directory carefully)
Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats
5. Move the existing Camera Raw.8bi plug-in to another location (for example, a new folder on your desktop). Ensure you keep this version in case you need to revert back.
6. Copy the Camera Raw plug-in, Camera Raw.8bi, from the download into the same folder as in step 4.
7. Launch Photoshop CS3 or Adobe Bridge.
Note: If generic camera thumbnails appear in Adobe Bridge, follow these steps:
1. Check to make sure the plug-in was installed in the correct directory in step 4 above.
2. Start Bridge.
3. Choose Tools > Cache > Purge Central Cache.
but still nothing. So what else could i do?
Raizen Albertsz,

Canon EOS 350D .CR2 pics still 'unsupported image format'?

I was releaved to see updates in Mac OS X (10.4.8) and Aperture 1.5 the other week, hoping it would solve my problem, being able to finally work with my RAW files (.cr2) from the Canon EOS 350D (yes, being in Europe these days).
I followed the posts on the forum throughout the summer, which recommended waiting for the next OS X update (which should support the camera in that raw definition file) and I didn't want to use the workaround, which clearly had problems with the colors on the pics.
After all the updates the other week, nothing has changed on my MBP. Still the 'Unsupported Image Format' on my RAW files. On the other hand, I don't see any posts on problems with the 350D camera anymore as well (only on CR2 files in general).
Am I missing something really basic here (tried rebuild library)? Or, have all the CR2 formats gone down the drain on Aperture 1.5?
Any help is appreciated, as I have already looked into Adobe Lightroom Beta and although I don't want to switch, the files seem to work there...

Yes, the import thumbnail is as you describe, the low res. JPG that is embedded in the RAW wrapper.
10.4.8 needs to be installed prior to Aperture 1.5 .... from a functionality point of view. I am not aware of a dependence that says AP 1.5 has to be uninstalled before a 10.4.8 upgrade or any such, not that AP 1.5 should need re-installing after a 10.4.8 upgrade .... assuming it was working correctly beforehand.
But to this last point, since you have an issue which may be related to AP or OS X, it is likely worthwhile updating both and in order.
Final thought. do you import directly from the CF card / camera vs. using an intermediary tool such as ImageBrowser or DP Professional? I am wondering if Aperture is very OCD aboout the image format wrapper and chokes at the least excuse that other apps. and tools ignore.
G.

IPhoto 6 OS X 10.4.7 support for Canon EOS 350D

I am thinking of buying a Canon EOS 350D.
Can anybody confirm whether or not this camera is supported in iPhoto 6 for RAW image processing, and more generally whether this camera is supported in the OS X 10.4.7. The current list of supported cameras does not include this model.
http://www.apple.com/macosx/upgrade/cameras.html
Mike

I have had the 350D for right at a month now. Basic operations with RAW and JPG formats work well. iPhoto recognized the camera automatically the first time that I needed to import.
Just recently I have begun having problems, and I'm starting to try to get to the bottom of the problems. When I import just a few photos up to 200 photos, everything works perfect. I have a 2GB Sandisk Ultra II CF card. When I exceed 300 photos (less than half the capacity of the card), iPhoto will not import all of the photos. I get an error message showing that the last 100 files of the 300 are unreadable files. The camera reads the files and displays the images on the camera screen. I tried the CF card in someone elses printer that can read cards. This read every picture on the card fine. I tried setting the camera so that it would not automatically shut off. That did not work either. If someone can help with this issue, I'd greatly appreciate it. This is the first post I've read, so I decided to try to get help here. I will also search the forums for other threads that may help.

Aperture 2 Raw Conversion and Canon EOS 350D? Getting slightly worse?

Hi,
I have compared a few images I shot with my Canon EOS 350d using the RAW converter in version 1.1 and version 2.0. These pictures showed flowers with special lighting conditions (high contrast, with selective sunlight). Then I've looked at some other pictures.
* 1.1 shows better distribution of light. In 2.0 a wall was more evenly lighted, where 1.1 showed that there are different different levels of light.
* in 2.0 one often has to apply 'recover hightlights', where this was not necessary in 1.1. Bright areas on flowers are much brighter in 2.0.
* in 2.0 dark areas are quite a bit brighter
* in 2.0 some pixel-size artifacts were introduced. For example on some leaf, darker green pixels appeared that were not there in 1.1
For the images I was looking at (especially when 'played' with light), the new raw converter of Aperture 2.0 seems to be a step backwards.
What are others' experiences?
Regards,
Rainer Joswig

I wonder if the slowness is related to the rendering of the canon raw files.
As an experiment, you might try exporting the raw photos and creating a new separate library with them to see if aperture runs just as slow.
Even if you find the nonraw library runs more smoothly, I am not really suggesting you adopt this as part of your workflow. It just might be good to know if the format is a factor or if something else is causing the laggardly performance.

I can't use my iPad2 with CANON EOS 350D

I can't use my iPad2 with CANON EOS 350D

Hi! You seem to be good at this. today I purchased the Camera Connection Kit but it doesn't work with my old Canon EOS 350d. I've switched to 'PTP' but it doesn't work. When I go in to "pictures" and "Camera" I can't see any pictures. Do you have any idea why? Can it have somehing to do with that I don't have the newest IOS 5? ( I have iPad 2nd gen). Don't know if you need to know anything more, but I would really appreciate if you could try to help me!

Aperture support of CANON EOS 350D?

Could you please tell if Aperture supports CANON EOS 350D.
Please note that even if one would expect the CANON EOS 350D to be identical with the Digital Rebel XT they *are not* identical with regard to the latest I-Photo. I can't load photos in RAW format from CANON EOS 350D to the latest version of i-Photo even if you can do it with the US Canon
Digital Rebel XT! So, please tell me if I can take photos in RAW-format from my CANON EOS 350D to Aperture which I intend to buy if it is compatible. When is i-photo going to support raw format in CANON EOS 350D?
Thanks!
iMac Mac OS X (10.4.3)

Hi,
I just came back from a Aperture seminar and I asked one of the Aperture presenters whether there was support for the 350D or not. He couldn't give me a clear answer to that and he was not aware that there was an american version of the camera called Digital Rebel XT and a european version called 350D where the Digital Rebel XT is supported by Aperture.
He did however say that Apple would continue to implement more raw file formats in Aperture as Canon opened the raw files for Apple. His advice was to contact Canon with regards to the 350D raw files.

1.1: stacking RAW images from Canon EOS 350D at import

I'm noticing a strange problem with Aperture 1.1 and my Canon EOS 350D. If I shoot only RAW images and try to import, Aperture thinks that the timestamp of every image is the time at which the camera was connected. Obviously, this breaks the possibility of stacking before import. If I shoot JPEG, there's no problem, and using the Auto-Stack HUD after importing RAW images works correctly too.
Anyone else seen this?
Thanks,
Fraser

I wasn't using Aperture before 1.1, but I reinstalled from my DVD on a supported machine and the bug does occur.
Strangely, if you open Image Capture before opening Aperture, everything works as advertised. It's only if you have Aperture set as the automatic application to open when a camera's connected.
For any Apple people that might be reading, I've reported this as Radar bug #4515776

Canon EOS 350D does not see memory card--I've tried two different ones. Will not format--err 99

Similar Messages

Maybe you are looking for