Canon EOS camera recognized but system can't access to new photos

From some time I can't access to Canon EOS camera - DigiKam crashed when try to show camera flash content, konquerror shows empty space on the camera: pseudodevice.

Whow that's weird.
Assuming we're all talking about the same issue, as i said, i've tried an old kernel -3.9.3- and the problem didn't went away.
-EDIT
Anyway, confirmed.
3.10.5 works with the phone (didn't tested the camera)
Gozer ~ # mtp-detect
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Listing raw device(s)
Device 0 (VID=04e8 and PID=6860) is a Samsung Galaxy models (MTP).
Found 1 device(s):
Samsung: Galaxy models (MTP) (04e8:6860) @ bus 7, dev 3
Attempting to connect device(s)
ignoring libusb_claim_interface() = -6PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
^C
Gozer ~ # lsusb
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 003: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II], GT-I9300 Phone [Galaxy S III], GT-P7500 [Galaxy Tab 10.1]
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Ignore the "failed to open session" message, it is because (probably) the session was already opened by dolphin.
Last edited by kokoko3k (2013-08-07 14:23:18)

Similar Messages

  • Camera Automounts But I Can't Access Images

    I've been plugging away at Arch Linux for a bit now in an attempt to get to know Linux better.  I've ran into a problem that I can't seem to figure out.  Current configuration is Openbox with Thunar as my volume manager. 
    I've gotten automount to work and it detects USB sticks just fine.  I can plug in my Nikon camera and it autodetects.
    I'm using a small photo management program called Mirage for the time being till I get things sorted out.  I can set Thunar to access Mirage whenever a camera is plugged in.  Whenever I plug the Nikon in, Mirage pops up, but then I get a root access error ("could not access the contents of root, Access Denied") when I try to access images. 
    I've followed the wiki here.  https://wiki.archlinux.org/index.php/Digital_Cameras with no luck.
    Here's my lsusb
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
    Bus 001 Device 003: ID 04b0:0181 Nikon Corp.
    Here's the output of ls -lR /dev/bus/usb
    /dev/bus/usb:
    total 0
    drwxr-xr-x 2 root root 80 Dec 6 14:49 001
    drwxr-xr-x 2 root root 80 Dec 6 08:35 002
    drwxr-xr-x 2 root root 60 Dec 6 08:35 003
    drwxr-xr-x 2 root root 60 Dec 6 08:35 004
    drwxr-xr-x 2 root root 60 Dec 6 08:35 005
    /dev/bus/usb/001:
    total 0
    crw-rw-r-- 1 root root 189, 0 Dec 6 14:35 001
    crw-rw----+ 1 root camera 189, 2 Dec 6 14:49 003
    /dev/bus/usb/002:
    total 0
    crw-rw-r-- 1 root root 189, 128 Dec 6 14:35 001
    crw-rw-r-- 1 root root 189, 129 Dec 6 14:35 002
    /dev/bus/usb/003:
    total 0
    crw-rw-r-- 1 root root 189, 256 Dec 6 14:35 001
    /dev/bus/usb/004:
    total 0
    crw-rw-r-- 1 root root 189, 384 Dec 6 14:35 001
    /dev/bus/usb/005:
    total 0
    crw-rw-r-- 1 root root 189, 512 Dec 6 14:35 001
    [slacker@slacker ~]$
    Ultimately it looks like my user is not authorized for the camera group, or the camera is not setting up under the camera group.  I'm missing something somewhere.  I know I added the user to the camera group.
    Last edited by minivanman (2011-12-06 20:57:47)

    [root@slacker slacker]# dmesg | tail -20
    [ 183.739068] sdc: sdc1
    [ 183.741902] sd 5:0:0:0: [sdc] Adjusting the sector count from its reported value: 15859713
    [ 183.743787] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 183.743795] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 183.743801] sd 5:0:0:0: [sdc] Attached SCSI removable disk
    [ 251.254813] sdc: detected capacity change from 8120172544 to 0
    [ 253.970568] usb 1-2: USB disconnect, device number 4
    [ 253.972394] scsi: killing requests for dead queue
    [ 264.646713] usb 1-2: new high speed USB device number 5 using ehci_hcd
    [ 303.445583] NET: Registered protocol family 10
    [ 314.216667] eth0: no IPv6 routers present
    [ 422.445259] usb 1-2: USB disconnect, device number 5
    [ 538.806655] usb 1-2: new high speed USB device number 6 using ehci_hcd
    [ 1098.335312] usb 1-2: USB disconnect, device number 6
    [ 1106.956604] usb 1-2: new high speed USB device number 7 using ehci_hcd
    [ 1410.921433] sdb: detected capacity change from 8103395328 to 0
    [ 1414.695827] usb 1-4: USB disconnect, device number 3
    [ 1414.698245] scsi: killing requests for dead queue
    [ 1416.365454] usb 1-2: USB disconnect, device number 7
    [ 1439.339918] usb 1-2: new high speed USB device number 8 using ehci_hcd
    [root@slacker slacker]#
    Here's my .xinitrc file
    nitrogen --restore &
    tint2 &
    exec dbus-launch openbox-session
    I tried using console kit but that killed any attempt at mounting drives period.  The last post I made was with console kit placed prior to my dbus-launch in .xinitrc.  So, that's fixed.  I can actually read my Pentax camera.  I can't read the Nikon.  So it's definitely Nikon specific.
    Last edited by minivanman (2011-12-07 06:12:56)

  • Iphoto will no longer recognize my camera, says it does not recognize the format....they are jpegs? And now it will not even open when I plug my Canon Eos Camera in to download. I have checked everything on the camera and it is working perfectly....

    Iphoto will no longer open when attaching my Canon Eos Camera. I have checked the camera and everything is working perfecty. When I open it myself, Iphoto is working perfectly too. But now when I attach the camera, Iphoto no longer opens at all. Yesterday it did open after a really long wait but it kept saying that it did not recognize the "format" of the images....they were jpegs??? Then it flashed on and off and if I hit download at just the right second they would download. But today it won't work at all. Any suggestions.
    thanks

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Why does CS6 automatically start when i plug in my Canon Eos camera and how do I stop it

    Why does CS6 automatically start when i plug in my Canon Eos camera and how do I stop it from doing so?

    Autostart is controlled by your operating system. check the relevant system control panel or right-click the drive letter of your memory card to change these options in teh properties.
    Mylenium

  • Soundblaster recognized, but I can't hear anyth

    I bought an old PS/ IBM PC 300 GL type 656 with Windows 95. The soundblaster is being recognized, but I can't hear anything. I've checked everything on the software side. All mutes are off, it all seems to be working, but no sound. Where am I making my mistake?
    Sound moron

    peace,
    this is really an ennoying problem. in the end i solved
    that...(thanks my god!..).in the begining of my search to fix my
    problem i visited this page and i saw there are others who have the
    same problem... in the end i found out that the problem was
    discussed in this forum and useful sugesstions were posted..i
    returned to this page to anounce it to u.. u can visit this adress
    to see the pcedent discussion about "Going Crazy: Why No Sound w.
    Flash 9 ..."
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1175007&enterthread=y#4209759
    i have tried the following suggestion and fixed my problem..
    i wish it works for you too..
    "All you need to do is to open registry editor by going to
    Start menu, Run, typing regedit and then Enter. After that, in the
    registry editor, walk yourself through the tree in the left pane,
    till you reach
    My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\Drivers32
    And then on the right pane, right click and click on New,
    select String value, enter "wavemapper" (without quots of course),
    ENTER, type "msacm32.drv", ENTER.
    Close the editor. No need to restart. Video on Google and
    YouTube et al would work fine now."

  • I have an iPad mini, 16GB, running on the 7.1.2 iOS system, my App Store icon is no longer on my home screen and neither is my iTunes Store icon. They are listed in my settings but I can't access any unless through other games, or songs on iPad.

    I Have an iPad mini operating on 7.1.2 iOS. My App Store icon as well as my iTunes Store icon are missing from my home scree. They are still listed under my settings, but I can't access them unless it's through an app that already exists. Where can I go to reinstall these?  I use the same Apple ID on my iPhone 5c as well and they are on the iPhone, but I don't know how or why they just disappeared from my iPad and want to know how to get them back without having to reset my iPad and lose what I have on it. Thanks, Karla

    Thanks so much! My grandaughters played games on the iPad over Xmas and one of their moms said shed restricted their access! Guess they forgot to enable again. Thank you again! Karla

  • ML upgrade went smooth but I can't access icloud document library from pages or any other app?

    The upgrade went OK but I can't access the icloud document library as described in the Apple features section.  I can't get the dialog option in either Pages or Numbers Open boxes and it is not an option in Finder either.

    1. Switch to Finder bt clicking on your desktop
    2. On the Menu bar is the Go menu
    3. Click on it holding down the option key and you should see the system library listed (exact wording escapes me I am not in Lion)
    Peter

  • DSP3 opens but I can't access anything

    I've recently updated my OS to Tiger, as well as install Motion 2 and Soundtrack Pro. Since then I have had all sorts of problems. I can open DSP 3, but not any projects. I can see the interface, but I can't access anything, it's like the program froze. My toolbar at the top of the interface is also not present. I've tried reinstalling every program (FCP, DSP, Soundtrack Pro, Motion, and Compressor) but I am still having the same issues. I can also not get compressor to even open. I just bounces once on the dock and the tower sounds like it starts to do something but then it just sits there. The export to compressor command is also greyed out in FCP. Soundtrack Pro and Motion also seem to be acting quirky when I open them, but I haven't really used them yet, so it could be normal. If anyone has any suggestions I would greatly appreciate it. Thanks.
    Andy

    Thanks for the suggestion. It did help. Why didn't that download when I would do the software update? Everything seems to be working now except for Compressor. It still just bounces once and then sits there. It is still greyed out in FCP as an export option. I guess I should take this question to the compressor discussion page, but if you have any other ideas I would gladly accept them. Thanks for your help so far. I am at least another step closer to having a working system again.
    Andy

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • My old laptop crashed, and took my iTunes account with it.  I got a new laptop, and want to sync my iTouch to my new iTunes account.  It gives me an error message stating that I can't sync to multiple iTunes accounts, but I can't access my old one!  Help!

    My old laptop crashed, and took my iTunes account with it.  I got a new laptop, and want to sync my iTouch to iTunes.  It gives me an error message stating that I can't sync to multiple iTunes accounts, but I can't access my old one! 
    How can I get my new iTunes account to allow me to Sync my iTouch?  The only option it gives me is to "transfer purchases" from my iTouch to iTunes, but that is only about 25% of my iTunes library-most of it is CDs I have uploaded.  How can I Sync without losing all my music from my iTouch???
    Also, I have lectures and photos, etc. on my iTouch that I don't want to lose.
    I've tried a few of the iPod copy programs-the free ones and the ones you have to pay for, but I can't find one that will work for ALL my content on an iTouch.
    Right now, I can't get anything from my iTouch to iTunes, and I can't update my iTouch with my new iTunes purchases, so I'm stuck!  Help!

    Also-I tried to use my backup hard drive, but I wasn't able to drag/transfer/send/move any of my muic files onto my iTouch when the iTouch was connected to my computer.  I can't figure out why it won't let me do that. 
    The only thing I can see when I open my iTouch on my computer is my file with photos.  I can't see videos, music, or anything else.  What's going on?

  • HT1420 I can't deauthorise my daughter's last computer from iTunes because it has crashed. We have three computers in the house but I can't authorise my new MacbookPro for iTunes or homesharing. So I can't even get my music from my old Macbook into my new

    I can't deauthorise my daughter's last computer from iTunes because it has crashed. We have three computers in the house but I can't authorise my new MacbookPro for iTunes or homesharing because it says I have 5 computers authorised (I don't). I can't even get my music from the iTunes library on my old Macbook onto my new one, because it won't let me sync my iPhone 5 with my old Macbook, as I can't update the iTunes software. So I have a new MacbookPro and a new iPhone 5 and I can't get any of my music on either of them. I feel singularly depressed.

    As you have more than 1 computer authorised then you should be able to log into your account on your computer's iTunes (Store > View My Account) and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.

  • I just changed my email adress, so i changed my itunes store adress to. but how can i get the new store adress on my Iphone ?

    I just changed my email adress, so i changed my itunes store adress to. but how can i get the new store adress on my Iphone to buy apps anew ?

    Go to Settings --> Store, click on your Apple ID and log out, then log in with your new details

  • 2007 iMac freezes up, rainbow wheel appears when this happens. I know the computer is starting to get old but I can't afford a new one at this time and would love to continue using my Mac, but it's frustrating. Would a fresh install or OS upgrade resolve?

    My circa 2007 iMac freezes up, and rainbow wheel appears when this happens. I know the computer is starting to get old but I can't afford a new one at this time and would love to continue using my Mac, but it's frustrating. Most of the time I ONLY have 1 thing open at a time, and keep my tabs down to a minimum. I bought this to do film editing on but with it acting like this I cannot do that. I know I need a ram upgrade (currently running 2 gb) and my OS is old, 10.5.8, but I think even with it being a bit outdated it should run better than this. Would a fresh install or OS upgrade resolve this? Or any other suggestions to keep this clunker chugging along for a little while longer?

    How full is the hard drive?
    Do you run any virus software or hard drive "cleaner" software like MacKeeper?
    If your model is from 2007 you can install up to 6 GBs of RAM.
    2 GBs is the barest of minimum RAM for OS X to run on.
    Especially if doing video work. You simply do not have sufficient RAM.
    Also OS X 10.5.8 Leopard support ended around 2009.
    You could update to OS X 10.6 Snow Leopard, at least.
    It is available on disc from the Apple store for U.S. $19.99.
    I Would seriously upgrade your iMac's RAM to the max. 6 GBs before doing this.
    Reliable Mac RAM can be purchase from online Mac RAM source Crucial memory or OWC ( also known as macsales).

  • I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still  access all songs and playlists on the old computer

    I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still  access all songs and playlists on the old computer

    If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
    Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
    You can request a new password here http://www.apple.com/support/appleid/

  • Need to download a programme to set up VPN but I can't access the website as it is also blocked in china? how do I install the programme if I cant download it or have it on a external hard drive.

    Need to download a programme to set up VPN but I can't access the website as it is also blocked in china? how do I install the programme if I cant download it or have it on a external hard drive.

    Not sure I understand you correctly.. Are you currently in China, and therefore unable to download the app? Also, which program is it that you're trying to get?

Maybe you are looking for