Canon EOS Camera T3- took pictures, but not seeing it on viewer? Need Help to retrieve.

Hello Everyone, 
I am new to this forum, so I hope you can help.  I recently took pictures on my Canon EOS T3 camera.  
Questions:
The camera was giving me a sound as if it was taking the picture, but unfortunately, when I try to locate it on the preview viewer, I could not find it.  
As well, I also took a few pictures, and saw them  on the viewer,but can't retrieve them on my computer. 
I would appreciate any assitance you can provide to me. 
I await your response, 
Cheers, 
nshah123

You probably need a new SD card.  At any rate you need to try one and see if that is the problem,
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Similar Messages

  • Why can I not synch my brand new IPod with one purchased itune and 2 riped from a CD, both of which are shown in my itunes account. The unhelpful "support" suggests I click an icon pictured but not in any screen view available to me. This is really off-pu

    Just bought an IPod Classic and put 3 songs on my iTunes account - 1 purchased and 2 from a CD.  I can't sync and the screen shot shown in the help section doesn't ressemble my scren views. i have now been on hold for 55 minutes despite a mesage saying "15 minutes or more" that implied a much quicker experience. This is really an unimpressive begining.

    Just bought an IPod Classic and put 3 songs on my iTunes account - 1 purchased and 2 from a CD.  I can't sync and the screen shot shown in the help section doesn't ressemble my scren views. i have now been on hold for 55 minutes despite a mesage saying "15 minutes or more" that implied a much quicker experience. This is really an unimpressive begining.

  • I have and ipod touch 4th gen and it will show up on my computer but not on my itunes i need help please and thank you

    I have an ipod touch 4th gen and when I plug it into my computer it shows up but it wont on iTunes and I was trying to put more music on it today and it wasn't showing up can u help please and thank you.

    Hey Babetta94,
    Thanks for using Apple Support Communities.
    After reviewing your post, the iPod is not recognized in iTunes. A frustrating situation to be sure. You haven't mentioned what OS the computer you are using uses. You can choose what article to use either OS X or Windows from this quoted section.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    If you have an iPod touch:
    For Windows: See iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    For Mac OS X: See iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Have a nice day,
    Mario

  • I have Acr 7.4.0 installed and I can revise photos of Nikon D700 but not of D800. I need help!

    I have installed ACR 7.4 and I can revise photos of Nikon D700 but I can not open photos of Nikon D800. I have reinstalled the ACR 7.4 but with the same result. How can I solve this?

    Thanks for your reply. I found out when I use Nikon transfer to copy the NEF files from the memory card than Acr can´t read the files. But when I copy directly from the memory card to an archiv (not using Nikon transfer) than Acr can read the files. It seems that Nikon transfer is doing something to the NEF file

  • Itunes recognises my Ipod but cannot see the files! need help

    Hi, when I open Itunes while my Ipod is attached to the pc, Itunes recognises my Ipod but cannot open it! The only recommendation I get is to totally reset the Ipod to the configuration of the factory but then I will lose all of my files! Can someone advise me what to do? Is there another option? hope someone can help me with this! thanks
    ps I tried copypod, but unfortunately it does not work. I have two files on my ipod that are damaged but I am not able to remove them! I think these two files are the problem.

    When I want to do something like you're describing, I open itunes, then select Edit-Preferences.
    I leave that window open and then connect the ipod. I can then use it as a disk in windows explorer.

  • I have recently bought a Seagate Goflex satellite mobile wireless hard drive. I have converted some of my AVI movies to mp4 and transferred them to the hard drive, but when I play them through my iPad 2 I can hear the sound but not see the movie. Help???

    I have recently bought a Seagate Goflex satellite mobile wireless hardrive , i have converted some of my AVI movies to MP4 and loaded them onto the hard drive, when I try and play them through my I pad2 I can hear the sound of the movie but not see the film, somebody please help, what am I doing wrong as I have spent a lot of time converting these movies to be able to travel with my iPad and watch them. Thank you

    Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
    While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
    It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

  • Iphoto will no longer recognize my camera, says it does not recognize the format....they are jpegs? And now it will not even open when I plug my Canon Eos Camera in to download. I have checked everything on the camera and it is working perfectly....

    Iphoto will no longer open when attaching my Canon Eos Camera. I have checked the camera and everything is working perfecty. When I open it myself, Iphoto is working perfectly too. But now when I attach the camera, Iphoto no longer opens at all. Yesterday it did open after a really long wait but it kept saying that it did not recognize the "format" of the images....they were jpegs??? Then it flashed on and off and if I hit download at just the right second they would download. But today it won't work at all. Any suggestions.
    thanks

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Canon EOS camera recognized but system can't access to new photos

    From some time I can't access to Canon EOS camera - DigiKam crashed when try to show camera flash content, konquerror shows empty space on the camera: pseudodevice.

    Whow that's weird.
    Assuming we're all talking about the same issue, as i said, i've tried an old kernel -3.9.3- and the problem didn't went away.
    -EDIT
    Anyway, confirmed.
    3.10.5 works with the phone (didn't tested the camera)
    Gozer ~ # mtp-detect
    Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
    Listing raw device(s)
    Device 0 (VID=04e8 and PID=6860) is a Samsung Galaxy models (MTP).
    Found 1 device(s):
    Samsung: Galaxy models (MTP) (04e8:6860) @ bus 7, dev 3
    Attempting to connect device(s)
    ignoring libusb_claim_interface() = -6PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
    LIBMTP libusb: Attempt to reset device
    ^C
    Gozer ~ # lsusb
    Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 002: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 007 Device 003: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II], GT-I9300 Phone [Galaxy S III], GT-P7500 [Galaxy Tab 10.1]
    Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Ignore the "failed to open session" message, it is because (probably) the session was already opened by dolphin.
    Last edited by kokoko3k (2013-08-07 14:23:18)

  • I have a Canon EOS Rebel T3 1100D which will not turn on.

    I have a Canon EOS Rebel T3 1100D which will not turn on. Battery charger shows green light , but when installed camera will not turn on. Place battery back into charger and it shows yellow light and takes awhile to charge and show green light. I thought must need new battery but it does same thing. This camera has been trouble free from start, it is a few years old but didn't think i would have internal issuses already. Am i missing something? Ordered ac adapter to plug in direct and see if it works then. Any ideas would be helpful Thank you.

    Hi GP!
    Welcome to the Canon Forum.
    If the camera still does not power on after using a new battery or after you try an AC adapter, the camera will need repair.  To start the repair process, you'll need to complete a Repair Request on our website. 
    Alternatively, you may participate in the Canon Loyalty Program.  This option allows you to replace your current camera for a discounted fee.  The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.  If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight.  Let them know you have been working with online technical support and the Canon Loyalty Program was offered.  Be sure to have your serial number for your camera at the time of your call.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Every photo has a blue sting but not in the level view. What must I do to change this? In other programms the pictures are shown right.

    Every photo has a blue sting but not in the level view. What must I do to change this? In other programms the pictures are shown right.

    Open the PSE Editor, not the Organizer.
    Enhance>Adjust Color>Remove Color Cast
    If that does not fix it, you can post a picture here on the forum so that we may provide additional suggestions. To do that, use the camera icon at the top of the reply box.

  • Printing picture but not words

    Trying to print a recipe from online.  When I click print preview the recipe is there, but when I click' print' it only prints the picture but not the text.  When printer turned on it had that message of "incompatible cartridge" but that finally when away, then it was stuck on printing the alignment page continually.  It then started printing facebook pages in quene(?).I deleted all those from quene, then only had recipe.  At first paper would go through and print a line, finally it printed the picture, but never could get the text.  Any ideas for a not too teckie person?

    and besides the audio getting to the camcorder,
    the screen does go black (instead of blue), just
    no video image.
    i've followed the same procedure for the last 5 years using Final Cut Pro:
    - selecting the sequence on the Browser
    - selecting mini dvd firewire (instead of 'none')
    on the drop down for Audio/Video quick setup.
    - and i've selected using same destination for 'print to video' as the source of video
    the pref's show Final Cut knows i'm using the DVX
    instead of another camera.

  • HT2998 Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP

    Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP?

    You really need a newer Mac Mini with a true HDMI output, because that Mac Mini's DVI output does not support Audio.
    You might try a 3.5mm to RCA adapter
    from the Mac Mini's headphone jack to the TV's audio input,
    but that would require being able to select the Audio input in the TVs menu while using it's HDMI input.
    Optionally you could also use an external 2.1 Speaker System or patch the audio from the Mac Mini to your home stereo system to enhance that older Mac Mini's audio.

  • TS1538 I phone 3gs wont show up in Itunes, it worked in the store, the phone is recognised as a camera by the computer, but not in  itunes. itunes recogises my ipod. I have taken every step on the troubleshooting page even the unistall and reinstall i hav

    I phone 3gs wont show up in Itunes, it worked in the store, the phone is recognised as a camera by the computer, but not in  itunes. itunes recogises my ipod. I have taken every step on the troubleshooting page even the unistall and reinstall i have vista

    iOS: Device not recognized in iTunes for Windows

  • Why does CS6 automatically start when i plug in my Canon Eos camera and how do I stop it

    Why does CS6 automatically start when i plug in my Canon Eos camera and how do I stop it from doing so?

    Autostart is controlled by your operating system. check the relevant system control panel or right-click the drive letter of your memory card to change these options in teh properties.
    Mylenium

  • When I make a video with the camera ipad mini seen but not heard I can do ?

    when I make a video with the camera ipad mini seen but not heard I can do ?

    Yeah, of course you can. All you do is, open PhotoBooth, record your video and then, once you have stopped the video recording just drag the movie out of the bottom of PhotoBooth onto the desktop. It is in .mov format so you can then add it to iMovie for further editing or just upload it to youTube as it is.
    Easy as pie!

Maybe you are looking for