Canon EOS Rebel Digital Camera Suggestion Upgrade

Hello,
I currently have been using the Digital EOS Rebel. My issue is that I use the Remote Capure 2.75 software and it only works on Windows XP. Can someone give me a recommendation for a camera upgrade that uses also a Remote Capure software that will work on Windos 7.
Thanks JR

I think Canon switching to EOS Utility for tether capturing so it is no longer support Remote Capture with newer OS. Canon Rebel is an old camera, and I know that Window Vista and newer OS would not recognize the camera so non of the software out there that I know of can provide tethered shooting for your camera on Windows 7. Maybe someone else know, but I think you will need to upgrade your camera.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Similar Messages

HT4106 Is the IPad connector kit compatible with the Canon Eos 350D digital camera, I can't get it to work. Comes up as device not supported

is the camera connector kit compatible with the Canon EOS 350D digital camera, as I can get it to work

Check what you've got 'Communications' set to on the camera's settings - it needs to be 'Print/PTP', not 'Normal' 'Normal' to 'PTP' :

Canon EOS Rebel T3 camera

I have a Canon EOS Rebel T3 camera. I have misplaced my inside cover for the lense. is there any place I can purchase one. I am speaking of the screw on one that covers the inside lense after you remove the larger lense. its hard to explain in typing so I hope you can understand what I am speaking of. I inserted a photo of what part I mean. if you see where the hand it pointing, well there is a cap that screws on to protect the lense inside. I need this screw on cover.
I am praying that you can tell me where I can find one. I need this asap. I am going on holidays on dec 19th and need a cover for it. thank you
Solved!
Go to Solution.

http://www.amazon.com/Canon-RF-3-Body-Cap-Cameras/dp/B00007E7K1
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

I got a canon EOS rebel T3 camera yesterday and it flashed orange and I can't take anymore pictures!

So, yesterday I got a Canon EOS Rebel T3 and it was working perfectly fine and I was just getting the hang of it! But then all of a sudden i don't know/remember pressing anything and it flashed orange when I went to take a picture and it did it again and it wasn't the battery because the batterie was halfway and I don't know what to do... It doesn't make a noise or anything when I click the shutter button! Please help me I'm freaking out!

Hold on don't send it anywhere until you:
Remove the battery for 30 minutes or so. Make sure it is fully charged and reinsert it.
Use a known good SD card. <----very important
Make sure you go into the menu and set everything back to factory defaults. (Check your manual)
Make sure the dial on the top is set to the green square.
Now try it again!
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Problems with Viewing Canon EOS Rebel t1i Raw Files in Adobe PS and Bridge CS 4

I am unable to preview the thumnails of my raw files from my Canon EOS Rebel T1i camera in Adobe Photoshop or Bridge (CS4)? I've looked everywhere for a plugin? Am I unable to view these files in these programs. Please help. Thanks!

You prolly need to update the installed Camera Raw plug-in...See the Camera Raw product page for more info on downloading and installing an update.

My Canon EOS Rebel T4i will not operate with a new battery. What could cause this problem?

While take pictures with my Canon EOS Rebel T4i camera it died. I assumed it was a dead battery. Upon charging the battery it would take just a few pictures and die again. I purchased a new cannon battery and fully charged it and now the camera will not even come on. What could cause this?

Sounds like the micro-switch in either the battery door or memory card door is barely making contact. If either of those two doors are opened the camera will immediatley power off. The micro-switch is in the door frame. The door itself has a tab which pushes on the switch.

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

You need camera raw 8.4 for your camera, if it’s Digital Rebel T5 EOS 1200D EOS Kiss X70. It is not compatible with PSE11; so it’s a bit odd if that software was bundled with the camera except that it will work with jpegs. I suggest you download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will editable in PSE11(keep your originals as backups and for use in the camera manufactures software)
Mac download (.dmg file) click here DNG Converter 8.4
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Using PS CS1 & a Canon EOS Rebel T3i. Where to get the plug-in to use camera raw?

Using PS CS1 & a Canon EOS Rebel T3i. Where to get the plug-in to use camera raw?

Thank you.
Windows 7 Starter
on a Toshiba NB505
Intel Atom CPU [email protected]
This is my internet notebook access device.
My primary system is MS Windows 5.1, with a flat screen crt.
Does this help?
Want to use RAW, can't afford to upgrade equipment just yet.
Thanks again for any guidance offerer
Michael
Connected by DROID on Verizon Wireless

Is there a Canon Eos (T4i, T5i) camera digital file transmitter avaialible? Please help!

Is there a Canon Eos (T4i, T5i) camera digital file transmitter avaialible? These models tlisted for Canon all cost $600 + and up all say they are only compatible with with the pro models. Is there a another brand or model that works with the lower end DSLR Eos rebel models that doesn't cost an arm and a leg? Please help.

I've heard the Wifi SD card may resolve your problem and they're much cheaper.
http://www.eyefi.com/products/prox2
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Canon EOS Rebel T3 Freezing or locking up.

Hi there, I have a canon eos rebel t3, I'm trying to figure out what is going on with this for a friend and trying to fix it. I had to fix a ribbon cable that her husband broke trying to fix a button that he thought was broken because the disp button wouldnt make the lcd come on. Heres pretty much is whats happening. I have tried new card, reformatted the cards. Sometimes it will work fine, but seems if you actually try to take alot of pictures in few secs it ends up freezing up, and the display doenst work or any of the buttons do anything, but you can hear beeps sometimes. But in the view finder the green writing is still visible on the buttom. It also will click to take picture but will not try to focus or autofocus. When it finally goes back to not acting up the focus works again and the buttons work. It seems like its locking up or has errored out trying to write to the memory. I don;t think it would be the lcd display because when it does work the lcd display has no problems. I have tried other memory cards with high read/write speeds. I tried to reformat them. Also when you plug the camera into the computer when is acting up the computer does not reconize it at all. Please give me some help on getting the problem down to one area of the camera so I can fix it for my friend that just doenst have the money to afford a new camera even with the trade in program Thanks for any help you can give me.

Hi kordris!
Thanks for posting.
At this point, the best suggestion we have would be to remove the battery from the camera for a few minutes when it freezes up, then put it back in the camera. If the camera's controls still freeze up and do not operate, the camera will need to be repaired. To start this process, you'll need to complete a Repair Request on our website.
This didn't answer your question? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon EOS Rebel XSi Software update won't install in Snow Leopard

I tried to install an update to Canon's EOS Rebel XSi camera software using downloaded images from the Canon website. Image loads, but when I start the installer I receive the error message "Don't have enough privileges to install. Log in as administrator and try again." I am logged in as the administrator and have no issues loading other programs or program updates. I tried installing the same software from DVD with the same results. Any suggestions? Thanks.

Sorry for the confusion. I'm new to the discussion thing and didn't update the entire profile from my last visit. I'm using a Mac Pro and am more concerned about not being able to install/update software because the program doesn't think I have admin privileges. I found the privilege thread in this section so that's where I posted the question.
I know the Canon software works in Snow Leopard because it's running on my laptop.
I'll try the Picasa software option you suggest.

Is the canon eos rebel t3i compatible with Mac osx 10.9.1?

Is the canon eos rebel t3i compatible with Mac osx 10.9.1?
I am trying to transfer my photos from my camera to my Mac.
I have downloaded the software for the camera to my Mac BUT it cannot transfer the photos.
EOS Utility states that it cannot be used with this version of the operating system.
I am running on OSX 10.9.1
Any suggestions?
Thanks in advance.

I would try uninstalling the canon software and then just plug your camera into your Mac. iPhoto should be all the software you should need.
Message was edited by: arthur

HELP!!! I do the yearbook for my elementary school. I took a lot of pictures on my Canon EOS rebel

HELP!! I do the yearbook for my elementary school. I took a lot of photos on my Canon EOS rebel t3i and was transferring them to my computer when I get impatient. I pulled the disc out of the computer while it was still trying to read it. Then I put it back in the computer to try to start over. When that didn't work I put the disc into the camera to see if I could read them there. The photos did not show in the camera so making things even worse I took a picture to see if it was working at all. I was able to take a picture but it said that only 1 picture was on the disc. Then I put the disc back into the computer and it came up showing the icons for the original photos but kept spinning and spinning and didn't do anything. Now it won't even do that much but what happens now is I get the DCIM folder like normal, then the 100CANON folder and then a folder that says ╟/ 0A1.u when i try to open that folder it says, "The filename, directory name, or volume label syntax is incorrect." Is there any hope for getting the pictures back or making this disc useable again? Thank you for your time and your help! I feel like saying, "Help me o b canon experts you're my only hope!"

Well, first may I say I think it is appalling that an elementary school would ask a kid between the ages of 6 and 11 like yourself to shoulder such a responsibility. Budget cuts are what they are, but kids should not be expected to pick up the slack. You have done remarkably well under these shocking circumstances. And you write way beyond your age group, which is a credit to yourself and your teachers.
You should tell your parents to contact their state congressman and demand that they increase funding for schools, or else drop the yearbook program.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

After loading Lion I cannot open some pictures. I get Unsupported Image Format. It tells me picture was taken with Canon EOS Rebel with unknown lens

After loading Lion I cannot open open some pictures in Aperture. I get Unsupported Image Format, all files even the ones I can open are .JPG. Also it tells me picture was made using Canon EOS Rebel with unknown lens.

You mention that 'most' of your files are DNG. Try
running the effected files through Adobe DNG
converter again and then import your reprocessed
files to Aperture and see if the problem persists.
I had a problem with a batch of D2x files converted
to DNG which had been metadata tagged by
PhotoMechanic (the evil app).
B.T.W. You mention that you had been using Bridge.
Are you getting any of the embedded XMP metadata
coming into Aperture during the import process?
Already tried that multiple times...no luck. I'm wondering though if it might be related to metadata as you suggest. I'm still trying different things to see what happens.
I was able to alleviate the problem on one set of images by painstakingly searching my external drive for the oldest backups I could find - CR2 files from before DNG conversion. I then ran those through DNG Converter and tried importing them again (this time, I embedded NO thumbnail, but I'm not sure if that made the difference - I think it was more likely a fluke in the original conversion that caused the problem). This time, it worked.
Now, the big problem is that I still have a couple hundred images for which I can't seem to locate the original CR2 files. I don't typically keep them after conversion, as I don't have the space for both.

After updating to Yosemite, my Canon EOS Rebel will no longer download to iPhoto

After updating to Yosemite, my Canon EOS Rebel will no longer download to iPhoto

Hi ..
There's an alternative. You can use the pre installed Image Capture app located in your Applications folder to import photos to your Mac.
Mac Basics: Connect your camera or camcorder

Canon EOS Rebel Digital Camera Suggestion Upgrade

Similar Messages

Maybe you are looking for