Canon file RAW CR2 and mac book pro not working ...?

Canon file RAW CR2 and mac book pro not working ...?
I'm using Digital photo professional software
and i'm using canon camer 5D mark2 and mac book pro 13inch last version
i'm trying to shooting directly by Digital photo professional, Remote shooting but the RAW file con't open by the software or mac preview but with photoshop Cs5 can open
is any one have the same issu ? and how fix it please
What i did :
- update camera RAW
- Update Mac software
- update Digital photo professional
Regards,,
Bandar

Dear all
is there any solution for that ?

Similar Messages

Mac Book Pro not working replaced logic board

Hi all,
My Mac Book Pro died on me about 2 weeks ago. I was using it like I normally do and then suddenly an error message came up on the screen and a white transparent screen came from the top of the screen to the bottom. Then it shut off. After that we tried resetting the PRAM and tried booting it from a Snow Leopard disk. The machine won't chime. It does spin a disk in the drive though, but there is no video either.
I brought it in to an apple store and they said it was the logic board. I purchased a new logic board , installed it and the symptoms are the same. Does anyone know what the problem could be?
-Steve

I purchased a new logic board , installed it
Make sure you installed it correctly no loose cables, etc.
Do-It-Yourself Laptop Repair
FixYa
Computers
YouTube's video tutorials for Macbook Pros.

Time Machine restore on a 17" Mac Book Pro not working

I have a 17" Mac Book Pro that I had to replace the hard drive in. I have a time machins backup to restore, but I can find the original Mac OS X install disk. I tried using the one from my new 15" and it doesnt restore the Time Machine. Any idea of how to get this to work?

Please make a Genius Appointment and take it in for service. It's under warranty.

Transfer of files between g5 and mac book pro

how can i transfer files between 2 computers with a firewire cable.
i can transfer the files with my network (ethernet and wlan), but i think fire wire 800

You don't say what your other Mac is. If it's Power PC, you can't do it. What ever you use it's got to be compatible with your system.
Assuming that's so...
Connect your FireWire cable between the two Macs. On the other Mac, go to System Preferences > Sharing > Services tab> enable Personal File Sharing.
On your Mac, go to System Preferences > Network > from the Show pop-up menu > Built-in FireWire > Configure IPv4 > DHCP and click" Apply Now".You'll bet a self-assigned IP address (If not go to "Advanced" > RenewDHCP Lease).
In the Finder from your Go menu > Network. You should see the other Mac. Click its icon > press "Connect button. Enter the user name and password for the other Mac (that Mac’s Admin name and password) > click Connect > choosethe Mac’s hard drive and click OK. The other Mac’s hard drive will mount on your Desktop.
-mj

Sync between my iPhone 4s and Mac Book Pro with OS X and iCloud does not work. Why?

I just purchased an iPhone 4S and downloaded Mac OS X on my Mac Book Pro. Synchronization between my iPhone and my Mac Book does not work with iCloud. Why?

You have set everything up - entered apple id, are connected to the Internet, Mac os x lion update installed enabling iCloud, etc?

Syncing outlook over a iMac and Mac Book Pro

I'm having some trouble figuring out how to sync outlook over a iMac and Mac Book Pro without connecting them by a cable each time.
Had the Mac Book first and did a migrate to the iMac. Everything is working fine but when I open an email on one it doesn't show that its already been opened on the other.
Is there a way to get outlook to update itself, or a program out there that will do this for me.

It sounds like you're using a POP mail account. POP accounts do not send any information back to the mail server, so another computer downloading the same mail will have no idea what has been read and what hasn't.
IMAP accounts do have two-way communication with the server, so you will be able to sync read mail, as well as store folders on the server and have them accessible to both computers.
Check with your mail provider whether they have IMAP access. You may have to change the server addresses and ports that Outlook uses, but they will be able to give you that information.
Caution: if you end up removing the POP account and adding it back in as IMAP, make sure you save your inbox and sent mail to a local folder first - otherwise it'll be lost.
Matt

I changed my apple id and my password for it too. but on my ipod and mac book pro my old apple id keeps showing up and i it doesn't except any password. what should i do??

I NEED HELP!!!!!!
i changed my apple id and my password (for the apple id), but on my ipod and mac book pro my old apple id keeps showing up for icloud, and i cant put either password!!! Trust me i tried.. What should i do???? So please help!!!!!!

On your Mac, go to System Preferences>iCloud, sign out, then sign back in with the ID you want to use.
If you're running iOS 7 on your iPod and old ID is your ID, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I have a multifunctional Canon i-SENSYS MF4140 and Mac Book Air Mac OS X 10.7.3 Lion (11D50b). I have a problem because I can not scan, it is not driver for this application?

I have a multifunctional Canon i-SENSYS MF4140 and Mac Book Air Mac OS X10.7.3 Lion (11D50b). I have a problem because I can not scan, it is not driver for this application?

I see printer drivers from Canon for that printer for OS X 10.7. but not scanner drivers. If the MF4140 is not recognized by the Image Capture application and Canon technical support cannot offer any assistance, all I can think of to suggest is to try a third-party scan application such as VueScan:
http://www.hamrick.com/vuescan/vuescan.htm
They offer a free trial period so you can see if it works with your Canon.
Regards.

My mac book pro 17 inch , 2008 year , display went dark, and the steps in "everthing Mac" book did not work, any ideas?

my mac book pro 17 inch , 2008 year , display went dark after rebooting from origianl disc, and the steps in "everthing Mac" book did not work, any ideas?

The router might be bad or incompatible, but let's be optimistic.
On System Preferences, go to Network/Advanced/PPP. Only two items should be checked: Connect Automatically When Needed and Disconnect when switching user accounts. Uncheck everything else. Now, click Okay on the end of the page. The next time you're online, you shouldn't be disconnected.
If you still get disconnected like before, we might be dealing with a router issue - which can get rather complicated.

My iPad 2 only keeps a set number of emails for me to view eventually deleting from the screen. How do stop this as it syncs with my phone and mac book pro neither of which do this?

My iPad 2 only keeps a set number of emails for me to view eventually deleting from the screen. How do stop this as it syncs with my phone and mac book pro neither of which do this?

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

IMac and Mac Book Pro will not stay connected to WiFi on TC

Hi,
I'm a new Mac owner, and I changed completely over to Apple over the weekend. Have na iMac and Mac Book Pro with a 2 TB Time Capsule. Hooked everythng up and all seems to be working, except everytime my computers go into sleep mode when I wake them up they ask me to select my wireless network again because I lost connection. Once I select my network it works fine until the computer goes to sleep. WhenI wake it up, it asks me again. I have it set to automatically connect to known networks, but it doesn't. I have to click on it everytime I wake up the computer. Before I hooked up the TC, I was using my old wireless router and it stayed connected. Now that I put the TC in as my wireless neteork it asks me to select my network. Is there something I'm not doing that may help the iMac and Mac Book Pro stay connected?
Thanks.

For that particular WiFi update, yes - it means you can't download it. However, that update may have been included already in M-L 10.8 ...
I feel your pain regarding these anomalies - I had the same problems on my year-old iMac that I just exchanged with Apple for a new one - I had worked these software/network issues on the old one for over five months, and finally, I demanded a new system as a replacement. Just too many problems. For me, Update 10.7.3 for Lion was the cause of my network problems. The WiFi update/patch solved the sleep issue for me, but not the auto-connect problem for system start-up's and restart's. After system start-up's and restart's, I would have to manually select my router address to connect via WiFi. But after manually selecting the address, the WiFi connection would stay-on - it wouldn't drop-off.
Again, with this replacement iMac, I don't even trust its WiFi capability - and with a desktop, why should I ? I simply purchased a Cat-6 Ethernet cable, and wired it into my Time Capsule ... To heck with WiFi ! ... Remember: don't download ANY system updates wirelessly ! Don't do it. ... Apple will rue the day they did away with Ethernet connectors on their computers ... - The same goes for CD-based software, or at least some other "physical" means for software installation ...
But, as for future system updates, and how they affect this new iMac ? - If they screw it up, I'm not messing with it ! - Apple's getting it back, the next day ! I'm not going to go through five months of testing, repairs, forced new purchases, etc. etc. ever again ...

90% space is empty in my mac book pro still working slow unable to work properly....

my mac book pro is working slower and i am unable to do any wprk in it... its more than 90% space is empty.

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

Mac book pro was working normal but after shutdown I try to start but not start only black screen

My mac book pro was working normal , I shut down proper and I want to start again I press power button for start but not start , only black screen same on shut down position , so how can I start my mac book pro again

Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

My mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?

my mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?

Reset, hold both home and power buttons until the iPhone begins to start, try this a few times if necessary. If still problem, you may have to just Restore your iPhone to get it working. In the future sync your iPhone with iTunes routinely and when it contains important data, iCloud when set correctly will do this for you continuously.

Mac book is not working. The logo is there and the sound but the circle keeps spinning. Can only bring up the utlities screen.

My mac book is not working. The sound is there and the logo on start up. The dial keeps spinning and never stops. I can only bring up the utilities screen and then I am stuck. PLEA

Try the tips here:
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
Especially holding the trackpad mouse button upon restart and resetting the SMC.
If it's stuck in there you might have to make a "guide" out of two thin pieces of plastic. Post back if that's the case.

Canon file RAW CR2 and mac book pro not working ...?

Similar Messages

Maybe you are looking for