Canon G10 RAW in CS2?

I use CS2 successfully with my Canon 5DMk1 RAW images, but even though it appears to be fully updated it won't read RAW from my G10. Is there a plug in for the G10, or do I have to upgrade to a later version of CS? Must I go to CS4, or will CS3 work?

You need the latest version of the DNG Converter, available here:
http://www.adobe.com/products/dng/
(see right side of page for download links)
Eric
I use CS2 successfully with my Canon 5DMk1 RAW images, but even though it
appears to be fully updated it won't read RAW from my G10. Is there a plug in
for the G10, or do I have to upgrade to a later version of CS? Must I go to
CS4, or will CS3 work?

Similar Messages

Canon G10 Raw Shots

So I think I realize that I cannot use my antiquated Photoshop 5 with RAW shots taken on my Canon G10. However I was not able to get any assistance from the help line as to which version I need to upgrade to. I don't have an open bank account so if anyone could make a suggestion as to which is the most cost effective that would work I would greatly appreciate it. I'm starting to think that shooting in RAW was a mistake. All are underwater pictures taken in Bonaire and I would really like to work with them

If by version 5 of Photoshop you mean just plain Photoshop 5.0 from the late 90s or early 2000's, then it is too old to upgrade to the current version of Photoshop which is 11 or CS4 and you cannot buy an earlier version of Photoshop, either, so the answer to your question is that you need to buy Photoshop 11 at the full price if you actually want to use Photoshop directly with your RAW images.
You may be talking about some other product with Photoshop in its name, like Photoshop Elements or Photoshop Premier (video) or Photoshop Lightroom, but the answer to what version to upgrade to is still likely the same, unless, perhaps Photoshop Elements 5 is still a valid candidate for the current version of Photoshop Elements which is 8.
You may also be talking about Adobe Camera RAW version 5 and since the current version of ACR is 5.6 and upgrades from ACR 5.x to 5.6 would be free, there is no upgrade cost. ACR 5.x shipped with Photoshop 11 or CS4 so you'd be set by just performing the latest ACR update.
If you don't want to spend $600-ish on PS-CS4 then you could spend half that and get Lightroom 2, now, or even use the LR3 beta from labs.adobe.com until next April and then buy LR3 for $300-ish.
However, if you don't want to spend even that amount of money, then I'd suggest getting Photoshop Elements 8 for around $99 and update it (manually according to the instructions on the ACR update pages) to ACR 5.6 and you'll be able to work with your images one-by-one, which is not as slick as doing multiple images in ACR as hosted in Photoshop, itself, but you'd be using the current ACR technology.
There may be version differences I am not that up on if you are on a Mac and using Elements, where perhaps PSE5 is not that old compared to the currently available version and possibly upgradable to whatever the current Mac version of Elements is.
If none of this answers your question, then be more specific as to what Photoshop 5 means, exactly, since many products have Photoshop in their name.

Canon G10 Raw and Others fixed

Check you software update for:
This update extends RAW file compatibility for Aperture 2 and iPhoto ’08 for the following cameras:
Canon EOS 5D Mark II
Canon PowerShot G10
Pentax K2000/K-m
Leaf AFi-II 6
Leaf AFi-II 7
Leaf Aptus-II 6
Leaf Aptus-II 7
Leica M8.2
It also addresses issues related to specific cameras and overall stability.
Happy Holidays...

Check you software update for:
This update extends RAW file compatibility for Aperture 2 and iPhoto ’08 for the following cameras:
Canon EOS 5D Mark II
Canon PowerShot G10
Pentax K2000/K-m
Leaf AFi-II 6
Leaf AFi-II 7
Leaf Aptus-II 6
Leaf Aptus-II 7
Leica M8.2
It also addresses issues related to specific cameras and overall stability.
Happy Holidays...

Canon 6D Raw to CS2 Camera Raw

Is there an update for Photoshop CS2 that will allow me to download Raw files from my Canon 6D directly into PS Camera Raw?
Thanks!

The raw format of the 6D was first supported in PS-CS6 with ACR 7.3.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Processing Canon G10 RAW Images in CS3 and Lightroom 2.1

I've not found a post on point. If I've missed one, sorry.
Contemplating getting a G10. After research here's what I understand. Please, correct me if I am wrong:
1. To process a G10 image in ACR, one has to have 5.2. One cannot use 5.2 in CS3. To process the image in CS3 one has to first convert to DNG. This can be done by way of a separate converter OR in Lightroom 2.1, on import.
2. Lightroom 2.1 will process the image in either RAW or DNG formats.
So, since I own both Lightroom and CS3 -- I will be able to use ACR in Lightroom if I don't want to convert to DNG first.
Am I right?
I don't want to buy the camera if I can't use my usual workflow.
Thanks.
sjh
PS. I think my CS4 Master Suite will arrive tomorrow. But, there is a lot of odd information about ACR and the G10 out there so I thought I'd take the time to clear it up and see if I got it right.

Lightroom 2.1 does NOT support native files from the G10. LR 2.2, which will be released in December will. So for both programs you need to use the Adobe DNG converter 5.2 to convert to DNG for the time being. It is unclear whether when you have LR 2.2 and CS3 installed whether "Edit in Photoshop" will work correctly with files from cameras such as the G10. It will always work fine if you use dng.

Adjusting canon G10 raw in elements 8

I'm using the trial version before I buy. The Camera Raw plugin in the program is 5.5.0.97. I can open the raw file in editor, but it doesn't bring up the raw editing sliders. Is it because I'm using the trial version, or do I need to do soemthing in set up.

Hi,
Can you please tell which OS are you using?
Also that you are talking about the Profiles or the adjustment setting sliders on the right?
Neways, you can try updating the Camera Raw plugin and see if thhis solves the problem.
Cheers
Swarnima

CS4 MAC Canon G10 RAW file panorama stitch problem problem

Hi,
I was loading 5 RAW files into CS4 auto stitch. The file view fine a thumbnails in ACR 5.2 and Bridge but I noticed that when I was attempting to select which images to select for stitching in CS4 that the I could not see thumbnail detail in the selection view panel. After I selected the images I wanted by file name CS4 crashed when I tried to start the panorama stitching process... Anyone else had problems like this?
MacPro 2.66 GHZ dual core. 6GB RAM and Latest version of CS4, ACR on Leopard.

It's working fine on my machine running Tiger. Your setup is a lot more powerful than mine, and mine handles a 5-raw-image-file panorama fairly snappy.
Photoshop 11 ("CS4"). Dual bootable, DP MDD 1.25GHz G4 (2004), maxed out at 2GB of RAM, both Spotlight and Dashboard disabled, Photoshop primary scratch disk on dedicated 160GB internal drive, at least 100GB available on each of the four internal drives, up to 300GB on some. Counting external FW drives just over 1TB of drive space available. nVidia GeForce 7800 GS 425MHz 256 MB graphics display card. Processor napping enabled through CHUD 3.5.2.

Aperture 2 Rendering underwater sunburst wrong - Canon G10, .cr2 RAW format

I've noticed that when Apple's Aperture 2 displays my underwater Canon G10 RAW pictures of sunbursts - picture of the sun taken from underwater - they are rendered wrong with a dark ring around the burst and are really blown out.
See link to photos of what I mean:
http://www.scubaboard.com/forums/canon-corner/308952-aperture-2-1-4-w-canon-g10- raw-sunburst-render-wrong.html#post4794371
Both photos use default settings, the "aperture214_g10RAW.jpg" was exported using Aperture 2.1.4 while the "photoshopCS4_g10RAW.jpg" was exported with Adobe Photoshop CS4.
Anyone have problems with this? Is there a setting I need to change to get it right?
Thanks!
jason

Thanks for the help.
Below is a link to my website where you can download the .cr2 file. I zipped it up. Please let me know what you find out. I also tried converting the file to .dng with Adobe's converter and still get the same look with the Apple interpreter.
In Aperture I tried tweaking the RAW, white balance, highlights, recovery, hue boost..etc but can not reproduce what it looks like in the Photoshop render.
Let me know what you can do. File is 13mb.
http://www.jasonjue.com/public/canonRaw.zip
Regards,
Jason

Macbook won't read card from Canon G10 in USB port

I can't copy Canon G10 RAW files from an SD card via a USB card reader onto an aluminum MacBook. I tried using Adobe Lightroom (the way I usually do this on another machine) to import the files but it couldn't recognize them. I tried to copy the files into a folder on the Desktop but I got a insufficient priveleges message. It seemed to copy the file names but tnot the files. When I tried to remove the card I got a "File is in use and can't be removed" message.
The card reader and the card work fine on a 24"Intel iMac.
Another USB card works fine in the card reader on the MacBook, too.
I'm puzzled.

Some added info, i CAN boot the bricked machine into Safe mode, but at reboot I get stuck in the same cycle again.
Oh, and in SafeBoot, the Macbook still tells me that no Airport card is installed, even though I know it does (and it's not knocked loose or anything).....

Canon G10 thumbnails don't work??

Hi -
I have CS4 and have installed the latest update but the thumbnails for Canon G10 raw files do not display (ACR will open and convert them properly). All other raw files (nikon) do display thumbs.
Any one have a tip for troubleshooting this?
thanks,
Tom O'Connell

Have you purged the cache for the offending folder(s) through the Bridge Tools menu?
Also check the ACR forum. I seem to remember that some type(s) of files from certain Canon files are not supported (not considered true or conforming raw files)
Adobe Camera Raw Forum [CLICK HERE]
What exact version of Bridge and the OS are you running?

IPhoto 09 can't import RAW file (.CR2) from Canon G10 Camera

Every time I try to import a RAW image on my G10 camera (the file extension is .CR2) into iPhoto, the program says that the file is in an unrecognized format. Yet the OS and I believe iPhoto supports RAW from the Canon G10. I have updated my software. Does anyone know why I cannot import this file?

Since the G10 support came with the 10.5.7 update download and reapply 10.5.7 COMBO Update again followed by a repair of disk permissions. See if that will jump start the import.

Aperture 2 won't recognize Canon G10 CR2 RAW files

The Canon G10 just came out and I got one!! But Aperture will not recognize the CR2 files that it makes. Any idea how to make this work?

If you can get your hands on a copy of Canon's Digital Photo Professional it may include the proper converters that you can use for now.
For EOS utility to run the camera must be connected and running and I'm not sure the P&S cameras are recognized by that utility.
I'm having trouble with G9 CR2 files on Aperture 2.1.2. When I import them they come in at 1:1 aspect ration meaning the preview is forced to fill the preview screen so all images look a little wide and verticals look really, really stretched out.
When I go in and selected Apple -- Camera Default in the adjustments palettes it pops into the proper 4:3 ratio.
Any way to get that as the default? I've tried selected all and hitting the Camera Default but only one image at a time is updated. Driving me crazy

Canon G10 Camera Raw - works sporadically

I downloaded and installed Camera Raw 5.2 in Photoshop CS4, about an hour ago. Since then I have had varied, and it seems random success in opening raw files in Photoshop.
I only loaded a couple of G10 raw files onto my computer [desktop]. Sometimes they open, sometimes they do not, and I get an error messages that reads: Could not complete your request because it is not the right kind of document.
Sometimes I can go through Picasa and when I click on open with and select Photoshop 4, it will open, other times not.
The same thing happens when I try to open the file from Photoshop.
I have restarted the computer several times.
Any thoughts, ideas or help would be appreciated.

Just getting an icon rather than a thumbnail can also be a symptom of ACR being in wrong directory.
Also, you might go to tools/cache/purge cache for xxx folder. Let thumbnails rebuild and see if they show correctly.

Can't open Canon 70D raw files with elements 12

Can anyone advise me why elements 12 will not open my Canon 70D raw files? When I have tried to update elements it tells me that there are no updates available. The Adobe Photoshop Camera Raw plugin is version 8.0.0.137

The Canon 70D was first supported in Camera Raw 8.2.
Camera Raw plug-in | Supported cameras
EOS 70D
CS2
8.2
5.2
Camera Raw 8.5 should be available for Elements 12 via Help > Updates
Photoshop elements 12 and camera raw 8.5
If you have windows XP, Vista or Mac OS X 10.6.8 you won't get the camera raw 8.5 update, because it doesn't work on those operating systems.
In that case you should be able to update to Camera Raw 8.3

Profile for Canon G10 to simulate Olympus E-3 colors

I want to create a profile for Canon G10 which will simulate Olympus E-3 colors.
I performed the following steps, but the result is very disappointing:
1. Photographed a GretacgMacbeth ColorChecker with a G10 and a E-3, in the same light conditions (Open shade) in RAW.
2. Converted the RAW files to DNG with DNG Converter 5.4, all default settings.
3. Opened the E-3 DNG file in Profile Editor. White balanced by right-click on patch #19. Set Base Profile to E-3 Adobe Standard, Color table 6500K, 'Both color tables'.
4. Set 18 Control Points, one on each color patch, #1 to #18. Wrote down the HSL values for each.
5. Closed the E-3 file and cleared everything.
6. Opened the G10 DNG file in Profile Editor. White balanced by right-click on patch #19. Set Base Profile to G10 Camera Standard, Color table 6500K, 'Both color tables'.
4. Set 18 Control Points, one on each color patch, #1 to #18. Wrote down the HSL values for each.
7. Noted the numeric difference between the HSL values for each patch in the G10 file, vs the E-3 file.
8. Corrected the HSL values for each control point, by the numeric difference between the two files.
9. Saved and exported with a new name.
Obviously I did something wrong, because the result is BAD!
I'll appreciate it if someone could help and point me in the right direction.
Thanks,
Moshe

I'd like to add two observations about my above experiment:
1. If I change the values of a Control Point using the sliders or the point on the color wheel, the preview changes, but much less than the change of the slider. Say, I change the H slider to -10, the change in the preview is only -2, or so. Is that how it should be?
2. If I hover with the cursor over a color patch in the ColorChecker preview the values change, probably due to noise, and it's difficult to decide which is the correct point. I didn't find an option, like in Photoshop, to set the sampling size so the value is an average of several pixels in all directions.
Moshe

Canon G10 RAW in CS2?

Similar Messages

Maybe you are looking for