Canon G12 Raw in PS Elements 6.0
I have found that LR 2.7 will not support G12 Raw files.
What is the situation with PS Elements?
Which is the earliest version that will support G12 Raw files?
Will the necessary version of Elements run on OS 10.4.11
Will LR 3.3 run on OS 10.4.11?
Mac OS 10.4 to OS 10.6 on various computers.
Canon 40D G10 G12
LR 2.7 (but now forced to upgrade to 3.3) & not pleased about it !
Thanks
Nic AzteckCamera
You'll need to install the Digital Camera RAW Compatibility Update 3.5 - Search the Support/Downloads site for that.
It still may not work. Iphoto 6 is an elderly piece of software now and predates your camera by several years. If it doesn't work you'll need to update to iPhoto 09 or later.
Regards
TD
Similar Messages
-
Can I process Canon CR2 RAW (taken with a Canon G12 camera)using Photoshop Elements 6 ? I am told that I need download update 6.3 but it won.t download to PE6.
Many thanks for your advice.
Date: Mon, 7 May 2012 08:08:34 -0600
From: [email protected]
To: [email protected]
Subject: Canon G12 raw CR2
Re: Canon G12 raw CR2 created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
No. You need to upgrade your software. ACR 6.3 requires PSE 9 or CS4/ CS5 products. Check this: Camera Raw plug-in | Supported cameras
Mylenium
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4384121#4384121
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4384121#4384121. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Can't import Canon G12 RAW images into iPhoto 6.0.6
unable to import Canon G12 RAW images into iPhoto 6.0.6 (Mac OS-X (10.5.8) - any ideas?
You'll need to install the Digital Camera RAW Compatibility Update 3.5 - Search the Support/Downloads site for that.
It still may not work. Iphoto 6 is an elderly piece of software now and predates your camera by several years. If it doesn't work you'll need to update to iPhoto 09 or later.
Regards
TD -
I am unable to open canon 6d raw files w/ elements 11
I am unable to open canon 6d raw files w/ elements 11. It seems that camera raw 7.1.0.384 is installed. I tried to update and nothing happens.Any help please?
Sometimes the Adobe servers can get busy; so try again from Expert Mode:
Help >> Updates
You should be able to select ACR 7.4 (see image) and then click the update button. -
Does elements 13 accept canon 70d raw file,as elements 11 does not
does elements 13 accept canon 70d raw file,as elements 11 does not,
Hi,
Yes, Photoshop Elements 13 should read raw files from the EOS 70D. You can always download the trial version and test it for yourself.
Download Photoshop Elements products | 13, 12, 11, 10
Brian -
How do I read Canon G12 raw files? I downloaded DNG converter 6.3. Still can't read the files.
6.3 should cover the G12, but there is no reason not to use the most up to date version.
-
Can't open Canon 70D raw files with elements 12
Can anyone advise me why elements 12 will not open my Canon 70D raw files? When I have tried to update elements it tells me that there are no updates available. The Adobe Photoshop Camera Raw plugin is version 8.0.0.137
The Canon 70D was first supported in Camera Raw 8.2.
Camera Raw plug-in | Supported cameras
EOS 70D
CS2
8.2
5.2
Camera Raw 8.5 should be available for Elements 12 via Help > Updates
Photoshop elements 12 and camera raw 8.5
If you have windows XP, Vista or Mac OS X 10.6.8 you won't get the camera raw 8.5 update, because it doesn't work on those operating systems.
In that case you should be able to update to Camera Raw 8.3 -
Canon 70D raw files Photoshop Elements 11
How can I view Canon 70D raw files in Photoshop Elements 11?
You need PSE12 to read your CR2 files. Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.2
Mac download (.dmg file) click here DNG Converter 8.2
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial -
Canon G12 RAW files not recognized
The DNG converter V6.3 I just downloaded and installed does not recognize RAW files from my Canon G12. Any idea why?
I read through those linked pages, but they didn't give me any solution.
After nosing around through a LOT of sites on Adobe's site (why aren't pages dated, took forever to find the most up to date or pertinent pages)…I found this one that was slightly related, but worked for me.
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
I had to download this zip, and manually place the plugin as directed, and now, After Effects CS6 will recognize my CR2 raw files from my canon 5D3.
Thank you for the help, it led me in the right direction, but the link above was the actual solution I found that worked!!
chilecayenne -
Problem with Canon G12 RAW file
I'm very disappointed because I can't use Lightroom with my new camera! I have this issue since LR 3.3. and CR 6.3 started to support Canon G12's raw file. Any raw file is decoded incorrectly, picture is grained, it has a lot of noise at any ISO (even 80 or 100). The defect is noticeable only at 100% zoom, not at 50% or other sizes.
I tried to do also a clean installation of LR 3.4.1 and CR 6.4.1 but the problem persists. (I use LR 64 bit on Windows 7 64 bit; with PS 12.1 64 bit I have the same problem)
Yes, the camera is ok, and with Canon Digital Photo Professional 3.10 all is perfect, the same picture is amazing.
Is there any solution please?
Thank you!
DavideIt may be that DPP knows how much default noise reduction to apply to your G12's raw images and Lightroom doesn't.
Can you adjust LR's noise reduction sliders to get a better image? If so, you could make that amount of reduction a default.
If that doesn't work for you, could you post a sample raw image somewhere that we could bring it into Lightroom and see what you are writing about?
Hal -
Hello,
did anyone know why iPhoto did not know the RAW files from my Canon G12 ?
JPEG files are no problem.Apple needs to add support for Canon's G12 CR2 files. They recently did include support in iPhoto and Aperture 3 for the S95 CR2 files. I suspect they will come out with support for the G12 soon ([this camera came out approximately a month after the S95). Patience is all you need. In addition if you search this forum you can find several work arounds until they do which will allow you to edit this files.
Apple always supports all the RAW formats for Canon and Nikon files. It does take some time since they have to reverse engineer each new file format.......the RAW format is based on capturing 100% of the information recorded by the camera's sensor. Every time a camera manufacturer comes out with a new camera they tweak the sensor and therefor change the file format. Since the sensors are an important part of the improvements in image quality for each new camera, they treat this data as a "trade secret" and won't share the details with Apple, Photoshop etc. This forces Apple to have to reverse engineer their support every time a new camera RAW file format comes out.
Apple will include the G12 RAW files in Aperture and iPhoto. -
Canon 400d raw files to Elements 5.0
I have searched (being new to this forum) and have been unable to find the definitive answer as to why I cannot transfer RAW files from my 400d into Elements 5.0.
I am really not PC literate, so any advice needs to be in basic terms! I have downloaded the latest plug-in and pasted it into the plug-in folder in accordance with step by step intructions, but this has made no difference.
I am not new to using my DSLR, but this is the first time I have shot in RAW and not being able to even view the files, never mind work with them, is somewhat frustrating.
Any help would be appreciated.If you're on windows, use AcrChecker to generate a list of your acr plugin
locations. If the problem is not obvious from the output, click on the
copy button, and post it here for others to look at.
AcrChecker is a free download:
http://curvemeister.com/downloads/acrchecker/index.htm -
I have CS5 and Elements 9. Neither one will open my raw photographs from either my Canon EOS 6D or Canon G12 cameras.
Do you understand my problem?Hi,
What operating system are you using?
Both photoshop cs5 and pse 9 should be able to open the canon G12 files, but you probably need to update camera raw
For cs5 go to Help>Updates from within photoshop cs5 to get camera raw 6.7
For pse 9 you have to download and run the installer for camera raw 6.5
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5264
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5263
For the canon EOS 6D you'll need the 8.4 dng converter to convert the files to dng copies which cs5 and pse 9 should open, since neither cs5 or pse 9 can be updated to the newer camera raw plugin required for the 6D files.
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5739
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
Note:
If you have windows xp or vista or mac os x 10.6, then you'll have to use the 8.3 dng converter instead of 8.4
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695 -
i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.
You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0. -
Adobe photoshop elements 11 won't read my canon T5 raw CR2 files.
adobe photoshop elements 11 won't read my canon T5 raw CR2 files.
why?
need help!
Solved!
Go to Solution.Hi Zach.
Sorry to say but Elements 12 came out several months before your camera. Adobe stops updating camera raw files for old software editions so that people have to buy new versions of the software when they get a new camera. It happened to me with LR3 when I got a new camera.
There are works rounds but they are a lot of extra steps and I think you would be converting the files to Some format other than RAW (tiff?) and which I am not sure will perform the same.
I think you just need to get a newer version of Elements.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?
Maybe you are looking for
-
I've changed my Apple ID email, and now when I try and reset my iPad to erase all settings and content it's asking me to put in my password but for my old email? I can't seem to find a way of changing it to my current email?
-
Issue to setup local Coherence cluster with WKA (well-known-address)
Hello - I have started local coherence cluster using WKA with single node,but when I start CacheFactory (coherence.cmd) with same configuration it throws following error message. Any help is appricicated. JVM startup Arrgument -Dtangosol.coherence.ov
-
Hi all, I have a PS3 and it's not allowing me to connect to certain people or even use the communication feature on it. So currently I have Frontier internet with a Gigaset modem, a WRT160Nv3 Linksys router. Currently my NAT type is 3 and I hope to c
-
No business key column is identified on existing dimension - Slow chg dimension
Hi, I m working to insert/update my Dimension table (in datamart) using SSIS "Kimball Method SCD component " tool. I have different columns as PK in source and identity column as PK in Dimension table. I also have Unique Index on the columns in dimen
-
How to run exe files in flash.
Im making a three related VB program and i want to integrate them into one package, for the easier access and navigation on those program, I make a flash file which serves as interface or menu for the navigation. My problem is how to call or run on t