Canon G9 not supported - Alternative

The topic of no RAW support for Canon G9 (CR2) that I posted yesterday was removed this afternoon. I did look into competitive products and they only recently posted upgrades to support Canon G9.
Lightroom v1.3 supporting G9 was launched approx. December 12. G9 Raw files worked with 1.2 but was not supported until 1.3. Upgrading to v1.3 messed up the RAW files processed under 1.2.
Bibble began support of G9 around December 17 This is not an option as for some reason Raw file for my older Olympus camera are no longer supported.
To be fair it appears most programs only began to support G9 within the last few weeks. I am leaning towards sticking with Aperture with the exceptions support for G9 should be in the next 4 weeks. In the mean time I can use the Canon Raw Processor that came with the camera and transfer files to Aperture.

Volker, do yourself a favor, stick with the Powerbook and Aperture. Apple's inexcusable delay in supporting the new format is no reason to cross over to the dark side. It is true Aperture does not yet support the G9, and I also find that very disappointing on the part of Apple. Many of the other apps do in fact support the G9-CR2 format.
I will briefly give you my experience. The G9 files are easily seen by Bridge CS3, and easily converted to .dng files by Adobe Camera Raw. But even those dng's are not seen by Aperture as they are based on the unsupported G9 RAW file type. The only easy way I have found to get them in Aperture is to use the Canon software "Raw Image Task" and save the files as tiffs. This was pretty speedy on my MacPro, and the files were promptly read by Aperture.
<Edited by Moderator>
Peace, John

Similar Messages

Canon ir2525 not supported by mavericks?

After I updated my Macbook Air to 10.9 Mavericks the driver for Canon ir2525 no longer works. I get error message saying "Printer is not supported".
I know printer still works because a Mini running 10.6.8 still prints ok to the Canon, and both computers still print to a HP LJ 1022. I tried re-installing printer under preferences with no luck.
Fix soon? Or do I need to restore backup?

Canon 2525:
Status:          Idle
Print Server:          Local
Driver Version:          2.0
Default:          No
Shared:          No
URI:          cntdbmu://MCD_UFR2_LPR/Canon_2525/lpd://10.0.1.9/
PPD:          Canon iR2525/2530 UFRII LT (US)
PPD File Version:          2.0
PostScript Version:          (3010.000) 550
(3010.000) 651
CUPS Version:          1.7.0 (cups-372)
Scanning support:          No
Printer Commands:          AutoConfigure Clean PrintSelfTestPage
CUPS filters:
cupstomcdufr2:
Path:          /Library/Printers/Canon/UFR2/Cores/cupstomcdufr2/Contents/MacOS/cupstomcdu fr2
Permissions:          rwxr-xr-x
Version:          2.43
commandfilefilter:
Path:          /Library/Printers/Canon/UFR2/Cores/commandfilefilter
Permissions:          rwxr-xr-x
Fax support:          No
Printer utility:          /Library/Printers/Canon/UFR2/Utilities/Canon UFRII Printer Utility.app
Printer utility version:          2.43
PDEs:
FinishingPDE.plugin:
Sandbox compliant:          Yes

Canon mp620 not supported in Lion?

Am I missing something or just out of luck/at the mercy of Canon/Apple to release new drivers for a 4 year old printer?

Are you talking about the PIXMA MP620? If so, then OSX 10.7 (Lion) is listed in the selection list.
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp620#DriversAndSoftware
I'm using a PIXMA MP620 on a 2009 Mini on 10.7.2.

3750 and Netflow not supported (alternatives ??)

              ISP
               |
|             3750            | -------- |           3745              |
- - - - - - - - - - - - - - - - -    span   - - - - - - - - - - - - - - - -
               |
          Internal
I have an ISP facing 3750 switch running BGP. I want to collect Netflow statistics for this IP traffic.
I know that Netflow is not supported on the 3750 switch.
I know Lancope offer a Flow sensor for capturing data on a span port and turning this into netflow stats.
http://netflowninjas.typepad.com/blog/2009/12/stealthwatch-510-highlight-flowsensor-ae-features-and-benefits.html
I need a temporary solution and I have a spare 3745 router which supports netflow. I cant put this router
in series because it may be a bottleneck on a 20Mbps ISP connection.
Is there a way of feeding span traffic from the 3750 into a 3745 and seeing if it is able to generate the netflow stats.
I have tried this using only one interface and it does not work. Do I need to span both internal and external interfaces.
Does the IP traffic arriving at the 3745 have to cross two interfaces to generate neflow stats.
http://www.netflowanalysis.com/How%20does%20NetFlow%20Work.html
Any ideas ?

Hello,
there are only 3 solutions.
1. Small router inline. I suppose that it will OK for 20Mbps line.
2. Use SPAN and some probe (software or hardware based).
3. Optical TAP and probe.
Our company is offering software or hardware based probes.
(see http://www.caligare.com/product/flowmon/ for more information)
You can also use the Lancope or nProbe (free) of course.
Kind regards,
Jan Nejman
Caligare, co.
http://www.caligare.com/

Canon 5D not supported?

Just got the new Canon 5D and can't download RAW images. I get an "unsupported image format" error.
Any ideas?

Canon is generally well supported by Aperture. New models (such as the 5D Mark II) are likely to be supported soon, older models (such as the 20D) have been supported for years. If you need to know about a specific model, the search function (right side of this page) is your best friend. You will not only get an idea about whether or not a model is supported, but often people also discuss workarounds for unsupported cameras.
Aperture has seen an upgrade to 2.0 earlier this year, you can't buy the 1.xx version anymore. Apple constantly updates Aperture (aside from adding new camera models which is taking place independently of Aperture updates and also benefits other parts of the OS). These regular updates (say from 2.1 to 2.2) have always been free.

Canon EOS not supported by Lion

I swithched to Lion and now my Canon Rebel camera will no longer do tethered capture. When I plug in the camera, it recognizes the camera, but no photos transfer. Any ideas of where to start?

I have a Canon EOS Rebel T1i and it works fine (that is when I connect via USB iPhoto opens and I can upload photos). Are you sure the Canon application for tethered capture is not the problem? There are EOS Utility updates this year at the Canon website.

Lack of support for Canon G7 and G9. Alternatives?

I am really disappointed about the lack of support for the Canon G9, and looking at the list of compatible cameras (http://docs.info.apple.com/article.html?artnum=306835) I notice that Canon G7 - even if it does not have a RAW format, is not supported either.
I am thinking that the purchase of the G9 may have been premature and that I may need to sell it and get another cam that is supported by Apple/Aperture.
What would you guys do? Is there a cam out there similar to the G9 at the moment that has a Apple-supported RAW format?
Best regards,
Kjell Are Refsvik

I think the camera closest to the G9 that has RAW support from Apple are the Panasonic DMC-LX2/Leica D-Lux 3 twins. Don't know where you are, but in the US, the Panasonic costs about $400. 10MP, 28-112mm (35mm equivalent) Leica lens, very compact body, and RAW output. The Leica costs $599, and has that classic look.
I don't know much about that cameras, but you may want to investigate.
Message was edited by: rkkwan
Message was edited by: rkkwan

I am trying to download pictures from my canon rebel eos to my Ipad but i get the message "this device is not supported" what can I do ?

I just bought an Apple Lighting to USB Camera Adapter. When I got home to and connected it to my Canon Rebel EOS Digital Camera. I received the error message "This device is not supported" I was wondering if there is any software or drivers I need to download?
Thanks
Don

I use Canon Cameras and have no problems downloading photos from the camera to the Lightning to USB Camera Adapter. My questions and suggestions might be basic but just to make sure:
1. This is an iPad forum area. Are you using the lightning to USB camera adapter with an iPad? Your info in your original post says iPod. I'm not sure that the adapter works with an iPod.
2. After you connect the adapter to your iPad and then use a USB cable to connect the adapter to the camera did you turn on the camera?
3. If you did turn on the camera and still did not get the import of photos to start try a reset your iPad. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. This will not cause any data loss.

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

I have a MacBook Air (10.8.2) connected to Canon MP530 printer. I'm unable to scan documents as MP Navigator is not supported. Any ideas on how to scan using this printer.

I have a MacBook Air (10.8.2) connected to a Canon MP530 printer. I am unable to scan documents as it appears my Mac does not support MP Navigator. Any ideas? I have made an inquiry to Canon but have not received any answers yet.

Why do you say your MBA won't support it? MP Navigator for OS X 8 and the MP530 is available here.

Tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"

tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?

This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody.

Adobe Camera Raw 5.3 does not support Canon EOS 500D

Hi,
I just bought a new Canon EOS 500D and it seems that Adobe Raw 5.3 (i.e. LR2 and CS4) do not support the new (or better changed) Canon RAW format (CR2).
Does anyone know when this camera model / RAW format will be supported?
Any ideas for workarounds?
Best regards,
paulmut

If the camera allows it, shoot raw+JPEG, that way, you can still use/work with the JPEG version, until the CR2 of the 500D will be supported.
You can also contact Canon and suggest them to take a competitive edge over Nikon by embracing the DNG format, that would have allowed support at release date, in many raw converters programs, like Pentax and others are doing.

Canon CRW Raw files not supported in Preview, Nikon supported

With Panther and Jaguar, Canon RAW files in crw format were supported in Preview. In Tiger, these files are not. Also, when importing these files from camera or CF reader, canon raw files tagged with .thm! What is this? an 8 kb "document" that renders file corrupt. Did not happen in Panther or Jaguar. And the problem is NOT my camera because it works fine on Windows PC and on previous OS mac.
here's the kicker: Nikon NEF raw format is NOW supported by Preview, but was NOT supported in Panther and Jaguar.
So, I called AppleCare and they say NO raw formats should be supported by Preview.
Another example of how Apple has lost compatibility and quality control?
Anyone else who uses RAW files in photography have same experience?
Thanks.
Michael.

The easiest way to edit plist files is with Property List Editor, which you get installed if you install the Developer stuff that comes with your OS install disks. If you don't want to add all that stuff your computer, it is possible to edit with a a straight text editing program in plain text. Personally I find that too confusing. I put a copy of my edited Raw.plist file up:
http://homepage.mac.com/francines/.Public/Raw.plist.zip
It has the substitution of the S50 for the original S60. It also lists the S70, so your Canon S70 should be working. If it isn't working either, then this hack won't help you. Download and unzip the file.
Because of permissions--you aren't supposed to be mucking about in this area--the easiest way to proceed is using the Terminal. The path is, unfortunately, extremely long. You open the System folder, then the Library folder, then Frameworks, ApplicationServices.framework, then Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources. You should now see a list of files that includes the Raw.plist file. Leave that Finder window open.
Launch Terminal from your /Applications/Utilities folder. If you have never used it, nor ever used a sudo command you will get a friendly warning when you issue the first command. We want to make sure that the original file doesn't get lost. So type:
sudo mv
and a space, then drag the Raw.plist file into the Terminal and drop it. The Terminal will helpfully fill in the path. Add a space, then copy the path up to the file name and paste, then type RawOld.plist as the new file name and hit the Return key. You'll need to type your password, which is NOT echoed to the screen, so type carefully and hit the return key again.
Next you want to add the modified Raw.plist file to the folder. Using a sudo copy command will insure that it belongs to system. So type
sudo cp
add a space and drag the new Raw.plist file into the Terminal window. Paste in the path to the folder (it should still be on the clipboard) hit return, give your password and hit return again. I don't remember whether it was necessary to restart the Finder or not. You might want to do a restart and then Repair Permissions, just to be on the safe side.
Francine
Schwieder

Can anyone tell me how to solve Flash Player on iPad 2. I understand Adobe not supported is there away around this or Apple alternative

Having just purchased ipdad 2 I am noticing that Flash Player is not supported can anyone please tell me how to get round this or suggest apple alternative. It's very annoying considering that flash is used in so much digital display

The Skyfire browser is the best solution I have found, so far. It's a browser that converts the videos on the fly. It doesn't work for other types of flash (games, ads, etc) but it does a good job with videos.
http://itunes.apple.com/us/app/skyfire-web-browser-for-ipad/id409153623?mt=8
I see your location is UK, I'm not sure if the app is available in the UK.

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

You could try using the DNG converter 8.7 on Windows vista:
<Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7>
<Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7>
You then need to watch this video to get hang of it:
<Camera Raw: How to use Adobe DNG Converter - YouTube>
Hope this helps.

Canon G9 not supported - Alternative

Similar Messages

Maybe you are looking for