Canon HV10e and playback speed

After capturing in imovie from a Canon HV10e playback of the clips in imovie is slowed to about 80% of yhe original speed. After exporting to Quicktime the movie plays still too slow. Is it a bug in imovie?

That's the way the application works. When using HDV material you have to drive the camera or deck by hand. There is no FW control.

Similar Messages

Canon HV10E and Firewire control

Capture video from my Canon HV10e does not allow to control the camera. I must manual start my camcorder. When I connect my Sony PC1 camcorder control buttons to start, rewind etc show up. Is there something wrong with my (HD) project settings?

That's the way the application works. When using HDV material you have to drive the camera or deck by hand. There is no FW control.

DIscrepancy between Flash Playback Speed and SWF

I'm experiencing a fairly signifigant DIscrepancy between rate of apparant motion in the flash files Im working on, and "speed" of the "finished" SWFs.
Put another way, what appears to be a reasonable speed for a tween in Flash, is a tad too fast when I view the work as a swf preview.
I would rather find a solid method of working with the images Im creating to determine the proper lengths ..and speed of these tweens prior to publishing a preview and then needing to go back and hand alter the length of the tweens I've created.
A "real time" environment would greatly increase the immediacy of creating such " files"
What can you suggest to synchronize these "playback speeds"?
Thank you.

How are you creating these tweens? If you are using coded tweens, what are you using for code?

Imovie 11 inconsistent playback speed, pauses and some pictures skipped

imovie 11 very inconsistent playback speed, random pauses and then some pictures skipped totally... any fixes?

not from a camera...all itema are still pictures in the video....with transitions between the pictures

HT3176 How can the slow motion playback speed be adjusted on Apple TV (pause and clicking right/left)?

I am looking to adjust the paused slow motion playback speed of Apple TV. On one of my Apple Tv's when paused I can click right or left to view tv in frame advance (or one second advance) on a different Apple TV there does not appear to be any advance even after multiple clicks. But, it will jump 10 seconds when paused and left or right is held down as it should.
Third gen. (A1427) Apple TV Software version on both 7.0.3

Unfortunately with that speed you are not going to have a good experience with HD streaming. I would make sure everything is set to stream SD. Go into the settings - iTunes Store and you can switch there for any purchases/rentals made through them.
If you use Netflix (or other streaming sites) go into your account(s) and see if you can switch to a lower quality stream. I know Netflix has that in place.

Playback speed in Sample Editor window many, many times faster than track (at correct speed) in arrange area. How do I sync Sample Editor playback speed to correct speed/tempo in arrange area? Track is spoken word.

Playback speed in Sample Editor window many, many times faster than track (at correct speed) in arrange area. How do I sync Sample Editor playback speed to correct speed/tempo in arrange area? Track is spoken word. Sample Editor playback sounds like Alvin on a meth binge. Spoken phrase is generated from Textspeech. Textspeech can export files as WAV files or MP3 files. Perhaps a clue?: When exported Textspeech WAV file is dragged and dropped into track in arrange area of new project, it exhibits same supersonic speed. When Textspeech file is exported as MP3 file and dragged and dropped in arrange area track, it plays at correct speed.

Thanks Erik,
If nothing else, this huge list of updates and fixes, shows clearly that the Logic Dev team is working hard on fixing and improving LPX to a major degree.... and from the list of fixes done.. show they do read the bug reports submitted!
As an aside....
I recall how all the 'naysayers' prior to LPX (and in some cases, since...) were proclaiming how Logic was dead, the team was being disbanded, we won't see any further development, the Dev team doesn't listen or care... and so on....... I wonder where those people are now?

How can I slow down the playback speed of selected parts of a captivate video?

Hi everybody,
I'm pretty new to Captivate and although it offers some great tools, there is something that I just can't get to work:
I'm creating a video tutorial about how to use a website i'm working with so I've tried using "Automatic" ("Demo" mode chosen) recording option which is recommended for this type of video. However, the video recorded has a different playback speed than the amount of time I recorded. This means that some of the slides have a quicker playback speed than the way I recorded, thereby not leaving enough time to show the given feature.
The recording mode with the most "true" playback was "Full motion". However, I would still like to be able to slow down selected parts of the video, but can only find guides on how to slow down the entire presentation.
Can you please advise me on how to slow down only selected parts of the project? If this is not possible in Captivate, please advise me on which video editing software (where you can slow down the playback speed on selected parts of the video) is compatible with Captivate 5?
Thanks!

Thank you. Andrew Kramer's Video Copilot video, which I somehow managed to miss, was very helpful.
I had a 79 second clip which I precomposed and enabled time remapping. But I have 12 places where I need to slow down the layer. After a while, I was runing out of room to add more keyframes using the method promoted in many videos and instruction sites (grab the last two keyframes, including the end frame, and drag).
In reality, you can add keyframes wherever you like and you can adjust them however works best within the existing timeline without messing with the duration, etc.
Much appreciated.
Paul

Playback speeds up intermittently on first scene when played after build

Hi
I have a problem with playback on apple dvd player after completing the build? When I play the authored project on apple dvd player after the build, after clicking on the play button in the main menu, the first scene (about 1 min. long) playback speeds up intermittently-normal speed then fast for a second then normal then fast-jumpy I guess might describe it. This only happens on the first scene with all the other scenes after this point in the timeline playing fine. I placed 2 new clips (different assets-scenes) to replace the first scene & the same issue happens with different asset clips being used in the same position (first) in the track timeline.
The scenes I used are pans of a running deer, which play fine anywhere else in the track timeline except the first position. When I play the project it's fine in simulator mode & in the project itself...this only happens after the build when playing on apple dvd player from VIDEO_TS folder. This is a test project for some footage so it's only 10 minutes long with bit rates at 5-6 ave. & 6-7.4 max.
-2 pass VBR-best motion.
Any ideas on what is going on?
I'm using DVDSP 2 with Jaguar 10.2.8.
Thanks for any help.
Della

Della:
Not a clue about the problem, sorry, but can "imagine" a workaround just to fool the problem.
You must have a PLAY button that connect to that first scene (first chapter in the track, I guess). If you connect that button to the second chapter (just to try) that plays fine or again behaves as it was first?
If that way plays fine, you can add a "false" first scene (i.e. one second of black exported from FCP) and connect the PLAY button to the real first (now second in the track) chapter.
I told you, it's just a workaround to have in hand in case your dead line gets close!!

Changing Audio Book Playback Speed?

I wasn't able to find where you can change the playback speed of Audio Books in iTunes. Can someone point me to where this setting is?
It's pretty easy on iPhone/iPod/etc... it's just a little button under the scrubber that allows for 1/2x, 1x, or 2x. But I can't see the option in iTunes. I'd assume iTunes on a Mac is capable of as much or more than the functions on an iPod/iPhone, but... I can't find the button.

In any case, if my Mac had problems, I'd send it in for service....!!!
About your problem, I don't think that it depends on hardware.
I'd check Live configuration and the SR of the audio files: you know, Live has so many features to modify speed and a lot of other parameters that bacomes easy to forget something.
Try recording something with Garage Band so you will be sure if there is a real problem.
cheers
rob

Movies fail to load and playback in web browsers

I can't seem to load and playback what appear to be QT movies in Safari, Chrome , or Firefox. A black window sits there and all I get is a spinning blue circle in the middle of the screen for a long time. I have a 2.66 Ghz intel imac with 2 gigs of RAM. Unfortunately I am stuck with satellite web service and my average download speed is about 1MBit/sec and frequently less. Could my problem be related to low bandwidth and/or not enough RAM? Or could I be having some sort of file conversion problem? Any help would be appreciated.
Thanks,
Don

What's the URL so we can test the page?

Playback speeded up

I have an iTouch. I imported a cd with meditations on it into my computer. They all play just fine. I created a playlist on my iTouch, and put them into it. When I play the playlist on my iTouch - 3 of the 4 are in fast mode...I deleted the playlist, and tried it again - same thing happened... Any suggestions on how to fix. The iTouch is up to date, as is the iTunes on my computer....

Go to the play screen with the three fast content. On the right and slightly below the scrubber bar is there a ox with 1/2X, 1X or 2X? Those are the playback speeds that appear with podcasts and audio books. To change the playback speed, tap the box to cycle through the speeds.

Ios7 podcast playback speeds not working in Nissan Leaf

In ios6, I was able to control my iphone 4 through the stock radio (via usb sync cable) and playback podcasts at 1.5x or 2x speed. after upgradeding to ios7, I can no longer playback podcasts at higher speeds when I use the radio to navigate to a podcast. If I navigate directly on the iphone, the iphone will playback at higher speed, but then the radio console freezes and I am unable to navigate to other podcasts, or skip or fast forward using the console.
Suggestions?
Thanks,
G

I'm having a similar issue, it seems to be related to the fact that the podcasts are no longer running from the music app - but I suspect that the Nissan interface is accessing the podcasts through the music app's API. I used to listen to my podcasts in 2x speed, and now when I play the podcasts through the usb sync cable in my Nissan (Rogue in my case) it is still playing in 2x speed but I have no way to change it. If I navigate to the podcast app on the phone, I'm able to have the controls (on my phone) but if I navigate to it via the Nissan interface it's stuck on 2x. Would sure like to know how to control the speed chosen by the Nissan playback. I absolutely hate that they split the podcasts out of the music app...

Adjusting Playback Speed of Individual Audiobooks

I just upgraded to a Touch. With my 60 GB Video I could adjust the playback speed for an individual audiobook file (M4B) by pressing the middle button of the click wheel and cycle through the title, picture, rating, playback speed, etc. How does one do that with the Touch? I've figured out how to set the default for Audiobooks in the settings but I can only rate books while listening.
Also, "Faster" with the touch sounds considerably "Faster" than with earlier iPods. Just my imagination?
Thanks.

'Search' is actually diasabled due to some 'technical issues' of the board
iM08 offers no effects anymore, you have two options:
download for free iMovieHD6
or follow my advice on my site:
http://karsten.schluter.googlepages.com/slowmowithim08

Canon rebel t3 shutter speed movie mode

Hi
i need help changing the shutter speed in movie mode. i just cant find how to do this task. i read the user manual and could not understand how to do it.
can anyone help me out?
Thanks
Guy

Shanna wrote:
Hello guy 3145!
Welcome to the Canon Forums, and thank you for your inquiry!
We appreciate your participation, however we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.
If you live outside the United States, please http://www.canon.com, and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
How do you know he's from outside the U.S.? And is the shutter speed actually set differently on cameras manufactured for use in other countries? Do you, and Canon top management, appreciate how absurd that disclaimer sounds to your U.S. customer base?
Bob
Boston, Massachusetts USA

HELP! My After Effects project is complete, but when I render out and playback the video is a lot faster then the original playback.

I have finished my After Effects project. The project includes a lot of text and fade ins and outs and looks perfect in the playback. But once I render and playback with Quicktime the video does not look the same. The animations are very jumpy. Please help!
Thanks,
David V

Hey David,
Also, my AE comp is 29.97, but i have four other comps in that one and they're 23.97 fps.
It seems like that would be the likely culprit. Is there a specific reason those comps (which are, I assume, nested inside the 29.97 one?) are 23.976? Do they contain 23.976fps footage? Mixing of comps, video and different frame rates can often cause juddery playback after rendering, as the interpolation of the frame rates to the master render frame rate happens without any interaction on the user's part. But AE gives many different options (and techniques, everyone has their own) to assist with getting the frame rates and speeds more aligned so the final frame rate is perfect for them all. It takes a little planning, that's all.
Let me know, I'll be glad to help if this is the issue.
Steve
Steve Holmes
Creative Director
Energi.design, Munich

Canon HV10e and playback speed

Similar Messages

Maybe you are looking for