Canon HV20 Compatibility with Final Cut Express

I cannot get the latest version of Final Cut Express to work with my new Canon HV20 video camera. I can get the video into iMovie 08, but nothing I try can get Final Cut Express to recognize the camera. I cannot import the imovie file either. It gives me an error. I can drag the video from the Hard Disk to Final Cut Express to import it, but that is cumbersome.

Start here:
http://www.fcpbook.com/Video10.html
Then come back and do this:
Please give your full system specifications, what computer, what drives, what camera or deck, how everything's connected, what settings are on the media, what settings you're using in FCE, and finally what version of the software, of the OS, and of QT are you using?

Similar Messages

Tiger Compatability with Final Cut Express

Will Final Cut Express 2.0.3 work with Tiger 10.4.4

I installed FCE on my Macbook and my iMac but when they are open at the same time and I'm connected to the internet the last one to open says I have to quit because of a"Protection Error".
Is there a way around this so I can work on two projects at the same time???
Pete

Sony HDR-SR12 compatibility with Final Cut Express

I'am having few drop frames when transfering in FCE. Somebody knows what the settings for tranfering in HD-FH 1080i.
Thanks

Wrong forum...try here:
http://discussions.apple.com/forum.jspa?forumID=936
Shane

Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1 I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders. I've used Sony tape based camcorders in the past. I'm looking for High Definition. I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible. I would like to download directly from the camera to FCE. I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia? And if not, but you really like another camcorder that you can recommend, what is it?

The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
One note, however, the Vixia HF M52 supports a number of different shooting modes. I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE. FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

Does anyone of you use a HD-camcorder like Canon Legria HF G10 and cut films with Final Cut Express.

Does anyone of you use a HD-camcorder like Canon Legria HF G10 and cut films with Final Cut Express 4.0.1. I did not buy this product yet but ask before. Now I have 4GB RAM and i5 MacBooK Pro. Do any problems exist using FCE having made films with this camera?
I save the films als QuickTime films (mov) and create DVDs with iDVD.
Will the data be too many if I make films with such a camera (HD) so that 1 hour of film cannot be burned to one DVD (or if is not necessary to film with such a good quality because in iDVD the film looses its quality?).

I was able to find this info regarding the camera:
AVCHD 1080/50i. 1080/25P (Maximum AVCHD 24Mbps)
Recording Modes
MXP 24Mbps / FXP 17Mbps / XP+ 12Mbps / SP 7Mbps / LP 5Mbps
The 1080/50i (interlaced) modes will work with FCE. PAL in this case. 60i is NTSC.
Al

Compatibility issues with Final Cut Express and Final Cut Pro

I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
If I transfer project files from one platform to the other will i run into any issues?
Thanks for all and any help.

{quote:title=cuttingedge wrote:}
If I transfer project files from one platform to the other will i run into any issues?
{quote}
Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE.

1080p30 .mov files from canon eos 5DMarkII in Final cut express 4.0.1

Hi everybody.
i need some help to import HD vidéo .mov files from Canon Eos 5DMarkII in final cut express.
The files is in 1080p30 (h264) like avchd but in the final cut configuration i have only 50i and 60i option in HDV and AVCHD
Final cut necessity to do a render (5h for 15min on my G5) and the movement quality is not the same.
Anybody have a idea to import Progressive files in final cut ?
maybe they have an update with new avchd 1080p codec in configuration ?
or i need final cut pro...?
Thanks in advance
and sorry for my english...i'm french

There is no good solution for working with this camera in FCE. It's 30fps progressive. There is no true video format that is 30fps. This is something Canon was cobbled together for this stills camera.
You can use MPEG Streamclip to convert the material to QuickTime using the Apple Intermediate Codec at 1920x1080. I think that's what it shoot. You should check the camera manual to confirm it shoots 1920 and not 1440.
The problem is the frame rate. You can convert it to 29.97fps or to 25fps. 25fps conforms to the European frame rate, but I don't know how well Streamclip will do this conversion. You also need to make sure the material is not interlaced by Streamclip.
The other problem is that FCE handles 1080 as an interlaced format, because for production it's supposed to be an interlaced format, at least in the formats, HDV and AVCHD, that FCE works with. You can set your sequence properties to have no field dominance, which should prevent it interlacing during compositing of any effects.

Can Motion be used with Final Cut Express?

I am needing to add a little more advanced graphics and I am wondering if I bought Motion, would it be able to work with final cut express HD or would I have to upgrade to the final cut studio pro suite?
Any suggestions or advice would be greatly appreciated.
Thanks!

Hi(Bonjour)!
Be careful with used copy, Motion 1 and 2 were sold as single product in the past, not from a editing suite like Final Cut Studio 2 or 3. There was an upgrade from Apple: Final Cut Studio 5.1 that gave the intel support for those applications included in studo bundle. So, used earlier version of Motion may be not usable on your intel mac without the FCS 5.1 upgrade.
The graphic processor card compatibility must be checked too.
I would go with a used copy of Adobe After effects, may be 6.5 or 7.
Michel Boissonneault

How do I import an AVI file for use with FInal Cut Express

How do I import or use an AVI file with Final Cut Express?
Thank you. Do I need to convert my AVI file and what is the
easiest way to do that? Thank you.

You should convert the media to QuickTime. Without knowing any specifics most likely the simplest way is to use MPEG Streamclip.

Issues Capturing with Final Cut Express

Hi
I am currently having issues capturing with Final Cut Express. I am using a Firewire 800 gold speed cable 9pin/4pin with my Sony LSF-S58 camera. I use mini DV tapes and usually capture on other computers with no problems. However this time I am using Final Cut Express version 4.0.1 along with a Thunderbolt to Firewire adapter so it'll connect with my MAC Book Pro (Operating system OS X 10.6.8). The issue is when I open Final Cut's capture option there is a message at the bottom that says "No Communicatin" I have tried various settings within easy set-up and nothing seems to work as well as browsing this help board along with others looking for the answer. Any help anyone can provide would be great. Thanks.

When I Google LSF-S58, I get a Sony Lens Hood, not a camera. Are you recording in HD or SD?
Have you used the Thunderbolt to Firewire convertor successfully on your computer with other devices?
Have you used the Thunderbolt port successfully with other Thunderbolt devices?
I don't know if this is applicable to your computer, but there is a Thunderbolt software update for 10.6.8 here:
http://support.apple.com/kb/DL1452?viewlocale=en_US&locale=en_US
MtD

How to insert a logo with final cut express 4?

How to insert a logo with final cut express 4? like this
http://www.milano.nl/sbs6_2005.jpg

I'm not certain, but I think, if there's not a background color saved as part of the original file, you'll retain the transparency. Give it a try.
What application are you using to create the original file?

Language Choice with Final Cut Express ...

Hello,
Like many things Mac-wise (Leopard etc), does Final Cut Express give a language option during the instal?
I am in France and would like to have the programme running in English - but those at the Apple store are unsure. I bought Leopard from them and they didn't know whether it was available in English. It turned out that there is a language option ... is that the case with Final Cut Express?
Thanks for your time and help ...

You have the choice of English, French, German and Japanese.
I can't remember whether you get the option to choose the language during installation, but you definitely do afterwards.
You control click the FCE icon and select "Get Info".
Then open the Language menu.
Message was edited by: Ian R. Brown

Picture in Picture with final cut express

I am really frustrated. How do a create a PiP (Picture in a Picture) with Final Cut Express This is so simple to do in adobe premier elements. You simple place one object over the other in the time line and drag with the cursor to resize. I searched in the manual, but I could not find any answers. I am relatively new user o FCE, so excuse me if I am asking a silly question!!!

That's the correct way David.
I originally thought you meant you were putting your cursor physically over the clip in the timeline and trying to drag it there, instead of in the Canvas !
Piero has made a free PIP filter that you might like to experiment with :-
http://web.mac.com/piero.fiorani/PieroFFCE_Effect/QuarterPIP.html
Message was edited by: Ian R. Brown

The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers
    Make sure that Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

What camcorder works best with Final Cut Express?

What camcorder works best with Final Cut Express?

Anything that's DV, HDV, or AVCHD and shhots in a format supported by the application.

Canon HV20 Compatibility with Final Cut Express

Similar Messages

Maybe you are looking for