Canon image browser no longer works with Mavericks.

I didn't realize until it was too late that Mavericks would be unable to run Canon and HP software we've been using for years.
Now what??

Canon stopped producing this application several years ago. My Image Garden and Easy PhotoPrint are the new products.

Similar Messages

HT6114 My CanoScan 8600F no longer works with Mavericks- No drivers available from Canon

My CanoScan 8600F no longer works with Mavericks upgrade. Canon does not offer new drivers.

The Canoscan Toolbox works with Mavericks to scan, copy, etc.
If you have Photoshop or Photoshop Elements the drivers can be installed so one can scan from within those applications.
All the necessary software (CanoScan Toolbox 5.0.1.2 Installer) can be obtained from the Canon site.
And, as Eustace mentioned, Vuescan works.
OT

Image Capture no longer working with Samsung SCX-4500W

Out of the blue, Image Capture is no longer working with my scanner (Samsung SCX-4500W). Until today, I have had no problems, but now Image Capture will only complete the "overview" but not the "scan" itself. I get the message that the "scanner reported an error." I have tried restarting, unplugging cables, etc. but nothing works. I don't think there is a problem with the scanner itself -- it is able to scan using the built-in "scan to PC" function, but not Image Capture. I am using OS X 10.6.1. Any suggestions?

Try running a repair disk permissions. This is done via the Disk Utility application. Reply if you need help to do this.
Also, do you have another application you can scan with? Note that Preview will use Image Capture, so you need some other application. As a test, you could download Picasa from Google which works well with TWAIN scanners.
Pahu

HT6114 HP Office Jet Pro 8500 Scanner no longer works with Mavericks upgrade

I have an all-in-one printer/copier/fax/scanner, HP Office Jet Pro 8500. The scanner no longer works with the Mavericks upgrade. Is it possible to get the scanner back in use? The printer and fax is fine, but I really use the scanner a lot. Please helap me.

The following link to the HP Support site indicates that scanning is still supported for the OfficeJet Pro 8500 using Mavericks but also indicates that "you may need to scan in a different way than you did before you installed Mavericks." See the FAQ section of http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en &os=4159&product=3752456&sw_lang=#N1237

Image Capture no longer working with Canon MG3250

I’m getting an error message when trying to scan from my Canon MG3250 using Image Capture this is over wifi but plugging in the USB cable doesn’t make any difference. Printing is working as normal.
I’ve used Image Capture to scan previously without any problem and have the drivers installed from Apple.
Open Image Capture, selected the scanner, which now has a generic icon. I get the following error message:
"Software for this device is not installed.
Scanning software for this printer is currently unavailable
Please contact the printer’s manufacturer for the latest software."
I tried Preferences>Printers & Scanners. Selected the Scan Tab and Open Scanner. This launched the printer utility Canon MG3200 series. I clicked on the Scanner icon. Where I get the same error as above.
Normally the software would auto download from Apple, but clearly looking at the Console log there seems to be a problem at Apple’s end:
Console log:
20/05/2014 19:28:36.141 PrintUITool[411]: There are 2 drivers posted for Canon MG3200 series. Software Update server configuration must be wrong.
I've worked around the problem by going to Canon’s website and downloaded the scanning software:
http://www.canon.co.uk/Support/Consumer_Products/products/Fax__Multifunctionals/ InkJet/PIXMA_MG_series/PIXMA_MG3250.aspx?type=download&page=1
I used IJ Network Scanner Selector EX to select the scanner and Canon IJ Scan Utility to scan, which worked after I made sure Image Capture was closed.
This doesn't fix the issue with scanning in Image Capture however.

Issue resolved by Paul Huntley on another discussion board.
"To scan with Image Capture you need to install the ICA v3.1.0 driver for selected Canon devices. This is a different driver package to the MG3200 Scanner driver that includes the Canon IJ Scan utility and does not work with Image Capture."
Installing the ICA driver resolved the issue and I can now scan again with Image Capture. I still don't know why it stopped working in Mavericks, or why Apple didn't auto install the driver when required.

Canon MP600 printer no longer working with Yosemite

I have an iMac, Mid 2011 with OS X Yosemite Version 1010.2 installed. It has 4gb of memory and a 2.7GHz Intel Core i5 processor. Of my 1TB of storage I have 934.81 GB free.
Since returning from a recent holiday my Canon Pixma MP600 printer has not been recognised by my iMac and I am no longer able to print from it. It did work with Yosemite before I left and I have been unable to restore the printer on the on the Printers and Scanners list. I have tried to uninstall the printer software and go back a step to install it with OS Mavericks but having gone through that process once it did not work.
Does anybody have any suggestions?

Hi trev1124
I have tried a number of ways to reinstall my printer but it does not appear in the drop down menu under Printers and Scanners and no matter what I seem to do will it come up. I am just about at my wits end with this. Short of binning my current printer (which was working perfectly well by the way) and buying a new one I do not know what else to do.
If anyone has any other suggestions I would be most grateful.

Applications no longer work with mavericks

After downloading Mavericks,
1. Applications no longer work, Dreamweaver, Photoshop, microsoft Office, Illustrator, and more
2. Multiple displays no longer work
3. Tried restoriing, but would not let me.
What is the fix to this... Anyone know?

1. Applications no longer work, Dreamweaver, Photoshop, microsoft Office, Illustrator, and more
If coming from Snow Leopard, then PowerPC based apps will not run on anything beyond Snow Leopard.
2. Multiple displays no longer work
Multiple monitors work for me. There are people that have some issues with multiple monitors. Look at
<http://discussions.apple.com/message/26542996?tstart=0#26542996>
Does that help?
Or can you please describe how it doesn't work.
3. Tried restoriing, but would not let me.
Restoring what? the older version of Mac OS X? What version is that? Did you make a backup before upgrading? If so, what kind of backup?

Spotlight on NFS no longer working with Mavericks, works with Lion

We have a muliprotocol NetApp filer with NFS and CIFS. Has been working great with Lion and Windows clients. We now have 2 OSX 10.9 users and although they can connnect and transfer files, the spotlight no longer works on this filer. I have done all the start stop mdutil commands, says it is indexing for a few hours but never gets any results. Spotlight still works on the local drives.
Any ideas?

Hi there 1antoine,
You may find the troubleshooting steps in the article below helpful.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
-Griff W.

Xerox workcentre 7535 print driver no longer works with Mavericks 10.9.2

Unable to change any settings in Print dialog pane for Xerox WorkCentre 7535. Xerox says its an Apple software problem. They have issed three revised drivers since Apple released Mavericks OS-X 10.9.2. Not only does latest driver (4-11-14) not work, their universal driver for Mavericks no longer works. Anybody else trying to print on a Xerox device?

I think I solved this. Our Canada office has a WorkCentre 7556, and it was having the same problem(s).
Here's what I found and did:
Log into the printer's web interface. Go to the Properties tab. On that page, expand General Setup. Then click Configuration Report.
Find and click the link for Machine Hardware. In that box, find a line item for Finisher Type. Scribble down or remember your finisher type (ours was Xerox Professional Finisher).
On the Mac in question, go to System Preferences, Printers & Scanners. Find your Xerox printer, click Options & Supplies, and then the Options button. Now on our machine, from a default installation, the finisher was set to OCT (Offset Catch Tray) and was greyed out. Changing this to the correct finisher mentioned above made all of our errors go away.
Cheers, good luck, and um, I guess mark as Answered if this works for you please?

Is there a 10.9 Server app available as 10.8 now longer works with Mavericks

Since updating from Mountain Lion to mavericks the 10.8 Server.app software does not run, is there an update to 10.9

tbh I'd forgotten about the OS Version mis-match problem with Server.app and because I'd found a version of Work Group Manager that ran under Mavericks thought there'd be a version of Server.app as well
As there's no way we will be update all our servers to Mavericks, I'll just have to revert to Apple Remote Desktop and run Server.app locally
Thanks for jogging my memory Semmelroccys about
PS Since Apple stopped making XServes they don't seem to give a **** about enterprise useage

Scanning no longer works with Mavericks (Samsung CLX-6220FX)

With Mountain Lion I had no problem with the printer. In 10.8 I installed it by going to Printers & Scanners, clicking the plus sign and then clicking Samsung CLX-6220 Series. Then Apple software update would install the required driver automatically and printing and scanning would just work.
In Mavericks when I click on my printer under the popup that clicking the plus sign opens up, I get the following message:
Clicking "Use Generic" works, but only with printing. Clicking "Open Scanner..." gives me the following:
I've tried installing the drivers from Samsung's official web site (Samsung_CLX-6220_Series_PrinterDriver.zip and Samsung_CLX-6220_Series_MACScanner.zip). But then printing would not work, only scanning.
Any help would be greatly appreciated!

Hey there Jacob,
It sounds like your printer is not functioning correctly after having updated to Mavericks. I was researching what is happening and found this article to help troubleshoot what is going on named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Regards,
Sterling

Facetime no longer working with mavericks

I've used facetime for a while now to talk to family out of the country. Since I've upgraded to mavericks I can't log in with my apple id and password (which are both correct as I can log in to app store with them). Facetime cycles between log in page, then verifying, then back to log in page. Sometimes just gets stuck on verifying. Weird.
Any help would be appreciated.

Hi there 1antoine,
You may find the troubleshooting steps in the article below helpful.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
-Griff W.

Dropbox automator script no longer working with Mavericks

Hi,
I use two versions of the following shell script (found on the net), launched by automator, to set up two Dropbox accounts :
Since upgrading to Mavericks, the script hangs when execution is requested. If the execution is then stopped and then requested a second time, the script terminates normally. Anyone have any idea why this might be (I am no expert of either shell scripts or automator) ?

ok then do this. Once you have your first Dropbox account set up try the following steps:
1. Create a folder named "Dropbox-second" anywhere you like.
2. Open terminal, write "bash" and press enter.
3. paste the line below and press enter. (Dont close the terminal window)
HOME=$HOME/Dropbox-second /Applications/Dropbox.app/Contents/MacOS/Dropbox &
4. A second dropbox instance will open requiring you to sign in. Go ahead sign-in and then click advanced and point to the "Dropbox-second" folder you created.
5. Close the terminal window and close the second instance of the dropbox from the topbar. (Click on the icon -> Click on the gear -> Quit Dropbox)
6. Now open AppleScript Editor and paste the following
do shell script "HOME=$HOME/Dropbox-second /Applications/Dropbox.app/Contents/MacOS/Dropbox > /dev/null 2>&1 &"
7. Click run and you will see the second icon of Dropbox in the topbar appear again.
8. Click stop and then from file save this as an application anywhere you like. Give a name like "DBMore" or anything you like.
9.Now to make sure everytime you login to your account the second dropbox starts, go to system preferences->users & groups-> select the current user-> click login items on the right->click the + sign to add "DBMore" application you created.
That's it you're done.
10. If you want to be able to differentiate between the two dropbox accounts click on the second dropbox icon in the topbar -> click the gear -> click preferences -> general -> use black and white menu bar icons.
Enjoy! Hope this really helps

Printer does not work with maverick

canon mf 6595 no longer works with Marverick

Jacques Levesque wrote:
I went to the Canon Site and download the good driver. I delete it, install again but nothing work!
The new UFR2 has two requirements.
1. You must use the "Line Printer Daemon-LPD" protocol. This driver does not support IPP, which is set as the default.
2. When you add the ADV6065 and ADV8085, you must select the entry that shows "Canon iR-ADV 6055/6065" and "Canon iR-ADV 8085/8095". Do not select the entry that shows UFR II in the name. This is the PPD for the older UFR v2.43 driver which does not work on 10.9.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

Canon image browser no longer works with Mavericks.

Similar Messages

Maybe you are looking for