Canon Image Class MF8180c

After a lifetime of PCs I have made the switch to an iMAC!! I just set it up and everything is pretty easy, however, I just encountered a problem. I have a CANON Image Class MF8180c that is a multi-function machine and less than a year old. I have discovered that this printer is not supported in the MAC OS system (I went to the canon site)
Does anyone know if there is some king of workaround?

Hi szfaber, and a warm welcome to the forums!
It looks like scanning is out...
http://www.hamrick.com/vuescan/vuescan.htm#canon
It looks like everything is out...
http://discussions.apple.com/thread.jspa?messageID=6209676

Similar Messages

Setting Black and White as the default when printing to a Canon Image Class 4080i

Hi,
I've got two Canon Image Class 4080i's that we are printing to at the school I work at. I have installed the Canon UFRII V2.40 Printer Driver for Mac OS X and we are able to print to them fine through any macbook running 10.5 to 10.7. My question is, how do I make the default printer setting be Black and White instead of color? I know how to change it from Color to Black and White by navigating to the Quality menu through the Print screen but I have to do this every time I print. Is there a way to make black and white the default?
Thanks in advance,
Cheryll

You’re really going to take photos straight out of camera on a 5d3 and print them with a blindly applied B&W conversion from the printer? I would highly discourage that, but if that’s what you want to do I’m sure it’s possible. Sorry, I have no experience with that printer so I can’t help.
Do you have a laptop? My recommendation would be to use a photo processing software like Lightroom (if you don’t have it LR5 is ridiculously cheap right now), play around before the event to get a B&W conversion that you like – even the preset ones are going to be better than whatever conversion the printer does - and then print from LR. It’d hardly take any extra time, and you could get a brief review of the conversions on a laptop screen before printing.

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
It does not look like the Canon driver has change from Mavericks to Yosemite.
If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
If you have a new or clean install of Yosemite, see > OS X Mavericks: Set up a printer

OS X 10.8 not recognizing scanner on canon image class MF4270

I have mac OS x 10.8 (mountain lion), and canon image class MF4270. Printer works fine; won't recognize scanner. I've installed the latest driver updates for my image class MF4270 from canon website, both fax and UFR II printer driver v2.43. Also have MF toolbox and Canoscan Toolbox 5.0. Nothing is working. What do I do now?
Robin Kelson
[email protected]
THank you

There is no scanning support for this model.
MF ScanGear does not support the MF42xx series. And CanoScan Toolbox is just for the inkjet-based models and stand-alone scanners.
Also, there is no ICA driver for this model so you cannot use Image Capture.
And resetting the printing system will not resolve your issue.

Pls my canon image class printer D530 always prints double lines on paper. what can i do pls?

i have changed the toner that came with the printer but its the same old problem. it also leaves an overflow of ink on the top of papers. pls any body who could help

Hi JerryBoss,
I'll be glad to help. If double lines and ink overflow are still occurring after replacing your Canon toner cartridge, the symptoms indicate either a paper media, cleaning or hardware related issue.
Please ensure that supported paper weights and types are being used (16-60lb. depending on paper tray), and they are loaded properly without overflow.
An issue of double lines or black streaks that are either being produced only when using the Automatic Document Feeder, or with every print, can often be resolved with cleaning. Cleaning the Automatic Document Feeder and/or the Fixing Assembly can help. Clicking the link to select article "Cleaning the Machine" will walk you through the steps as well as cleaning the Platen Glass.
If the issue remains, after the above is performed, please contact us for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Updating printer canon image class mf8050cn

are there any updates for the canon MF8050Cn printer to allow airprinting?

Not according to http://support.apple.com/kb/HT4356.

My Image CLASS MF4350d printer is not recognized by windows 8-64 bit

My Image CLASS MF4350d printer is not recognized by windows 8-64 bit any help how can i fix the problem. I just bought new HP computer from Future shop and it came with Windows in it. but this windows8 doesnt have drivers for my printer Image Class MF 4350d. Now I hve no clue how can i fix this isue. Because I checked on Canon website for drivers and downloaded and run the drivers, but no solution for my printer at all.

Yes. I have the latest version intalled but this hasnt helped.
I thought it could be to do with the Shuffle not having enough of a battery charge.
So i plugged it into the wall charger and then tried this didnt work either.
It wont even play music for some reason. The only information I get in the earpiece when I turn it on is what the battery level is at.

Lines in the file when I scan with the ADF in the Image Class MF4770

Hi.
I am the owner of a Mulifunction Printer Canon MF4770 Image class.
When I scan a document using the ADF, I get two lines along all the page digitalized.
Is there any way to clean the ADF scaner?
why do i get this line in the file ?
I attached an example in order to you can see what I'm trying to explain.
Regards

[topic moved to Reader Touch subforum]

Am trying to insert new cartridge in Image Class D530. Toner cover will not close after insertion?.

I am trying to insert new toner cartridge in Image Class D530 laser printer. After insertion of cartridge, correctly I think, the toner cover will not close. What am I doing wrong?

Hi Sparrow.
What is the model number of the toner cartridge that you are experiencing issues with? The imageCLASS D530 supports the Canon Cartridge 128.
Please follow the instructions below to insert the toner cartridge. Ensure that both sides are level as you are inserting the cartridge in the machine:
1. Verify that the orange tabs and sealing tape have been removed.
2. Insert the toner cartridge.
Fit the protrusions (A) on each side of the toner cartridge into the guides located on each side of the machine. Slide the toner cartridge into the machine, until the toner cartridge meets the back of the machine.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Cannon printer/scanner image class mf4150

can I install my cannon printer/fax/scanner image class MF4150 to my IMAC OS X Mountain Lion?

Hi Glenn!
I will be glad to assist you.
It appears that one of the buttons on the control panel may be sticking and causing the error. I recommend powering off the machine and unplugging it from the wall. Once the unit is unplugged, press all of the buttons on the control panel, starting left to right, one at a time. Next, plug the machine back in and power it on.
I hope this information is helpful to you. If the error persists, I recommend that you contact us at 1-800-OK-CANON (1-800-652-2666) for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Re-size an image in using the Image class?

Is there a way to resize an image using the com.day.cq.wcm.foundation.Image class? I wanted to extend the foundation image componet and have it resize to a specific height and width. Is there a way to change the size of the image before you call image.draw(out) ?

You also don't want to insert you resizing efforts prior to calling the image.draw method. The draw method doesn't actually render the image, it draws the HTML img tag that your components print out. If you were to use the ImageHelper to get the layer and resize it that would not actually change the size of the image.
Now that img tag will contain a URL to the image, and that URL will generally look something like this (unless you have customized your image components):
/path/to/your/page/_jcr_content/par/textimage/image.img.jpg/1323947520848.jpg
This URL is going to trigger a script or servlet that will be responsible for rendering the image. In the example above because the textimage component extends the parbase component and because URL includes the img selector it will end up triggering the servlet at /libs/foundation/components/parbase/img.GET.java. If you go into CRXDE Lite you can go to this file and look at the source code of this servlet and see an example of how it uses the layer to resize the image if that author edited the image in the smart image widget.
You can also see example of servlets that resize and image ot specific preset sizes (as you want to do) you can look at /apps/geometrixx-outdoors/components/product/image/thumbnail.GET.java and /apps/geometrixx-outdoors/components/product/image/nav.GET.java.
So what you would want to do is something like this:
Create your own component at /apps/mysite/components/foo
Create a servlet at /apps/mysite/components/foo/bar.GET.java - put your logic to resize the image here based on some of the examples
Create your component JSP at /apps/mysite/components/foo/foo.jsp
Create your component's dialog and in this dialog include a smart image widget - make sure you store your image on component node, not a sub-node. If you store your image on a sub-node you need to make sure the sub-node includes the same resource type as your main node).
In your component JSP when you create your foundation Image object make sure to image.setSelector("bar") before you call image.draw()
That should result in an image URL that looks like /path/to/your/page/_jcr_content/par/textimage/image.bar.jpg/1323947520848.jpg
Those steps aren't tested - so I may have missed something or mistyped something, but it should point you in the right direction.

What is a Problem With Image Class very amizing

When I am using Image Class in my program it start the new thread .
e.g Image img = Toolkit.getDefaultToolkit().getImage("c:/imode/top.gif");
program is not terminated .
Please give me solution on this problem .

You should be using a MediaTracker to ensure that all the resources are loaded before doing anything with them. In addition to this, it is sensible practise in any multi-threaded program to call System.exit to make sure all threads terminate.
// Begin loading the image. Remember that this call starts a new thread. Image loading occurs in the background so that partial rendering can be done.
Image img = Toolkit.getDefaultToolkit().getImage("c:/imode/top.gif);
// Track the image to completion.
MediaTracker tracker = new MediaTracker();
tracker.addImage(img, 0);
try {
tracker.waitForAll();
} catch (InterruptedException ie) {}
// ... now do stuff with the image ...
// make sure all threads stop
System.exit(0);

Binding images to the Image class

Hi everyone,
I do not know how to bind my images to the image class in order to change its width and height.
So, if you know how toconstitute relations between Image class and the images, please inform me.
Thanks,
Mert

http://java.sun.com/j2se/1.4.2/docs/guide/imageio/Are there any other ways for this problem ??

Please help, my Canon Image Formula P-215 will not work w/ Mavericks

Please help, my canon image formula p-215 will not work w/ the new mavericks upgrade, is there a work around?

I ran into the same problem, I posted what worked for me in another topic in this forum:
https://discussions.apple.com/message/25208435#25208435
Hope it helps

Not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore

Maybe someone can help me.
Yesterday I noticed, that I am not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore (InDesign Version 6.0.4).
At the end of january I printed double sided the last time and it worked.
Right now, I can choose "double print", but the system does not keep it. I tried with different documents already and it didn't work, so it can't be just that one file. Since everything works out of other programs like Adobe Acrobat or MS Word, it can not be printer bug; it's pretty much my impression that it must be a InDesign bug.
So if somebody has any idea .... please help :-(
Thank you in advance
red witch

Sorry that I forgot about the operating system, but I am new so you may forgive me about that ...
I am working with a PC. Last week I was working in a document and suddenly the side window did not show the sides anymore. Our IT department took a file from my collegues PC and copied it to my PC, after this the sides where shown again. Since my colleque has got the same basic problem, I think something went wrong on the installation. I am not the expert with this installation stuff.
Bye
red witch

Canon Image Class MF8180c

Similar Messages

Maybe you are looking for