Canon Image Runner 5045 and OSX 10.9

I upgraded to Mavericks and now can't print with my Canon Advanced Image Runner 5045, it keeps saying:
Open error.
Switch the printer off and on, and then start the print job again.: 16013
Tried that and nothing!

This solved my problem - setting up a new printer with the Generic PS driver.
Cheers
PAHU wrote:
That output is Postscript code and would indicate that you have created a printer using a Postscript driver instead of the UFRII driver - and your ADV C5045 does not have the Postscript option installed.
My guess is that you also have the Canon PPDs and/or the Canon PS driver installed on this Mac and you selected either one of these PPDs when you added the printer. So you should remove this printer and add a new one, ensuring you select the correct PPD. It will be listed in the Printer Software window as "Canon iR-ADV C5045/5051"

Similar Messages

Does anyone have a PowerShell script which change the paper source on a Canon Image Runner Advance?

I came across this Powershell script on the web, which does a good job of printing out PDFs:
Start-Process -FilePath "C:\Users\Test\Documents\Listing.pdf” –Verb Print -PassThru | %{sleep 10;$_} | kill
Start-Process -FilePath “C:\Users\Test\Documents\Scan0001.pdf” –Verb Print -PassThru | %{sleep 10;$_} | kill
Start-Process -FilePath “C:\Users\Test\Documents\Scan0004.pdf” –Verb Print -PassThru | %{sleep 10;$_} | kill
See: http://gregcaporale.wordpress.com/2012/01/18/powershell-to-print-files-automatically/
What I want to know is, does someone know how to write a Powershell script so that before printing out each PDF, a tab will be pulled from a separate paper source tray. I need the Powershell script to
1. Set the paper source to tray 4 where the tabs are.
2. Print a one page PDF which just reads "Tab 1" or whatever, on the tab itself
3. Set the paper source to ray 1 where letter sized paper is.
4. Print a PDF of the document to go behind tab 1.
. . . and then repeat.
I am working with a Canon Image Runner Advance copier/printer into which tabs can be loaded. It includes an insert sheets setting in the properties, which allows a user to specify the pages where a tab or slip sheet should go. But I don't want to deal with creating a very large PDF, and then identifying all of the pages where an insert should occur.

Here is the powershell code for adding ips to relayiplist..hope this helps.
this code will take the ips of the host machine and add it to the relayiplist...works for me...
$Networks = Get-WmiObject Win32_NetworkAdapterConfiguration -ComputerName localhost | ? {$_.IPEnabled}
$ipblock= @(24,0,0,128,
32,0,0,128,
60,0,0,128,
68,0,0,128,
1,0,0,0,
76,0,0,0,
0,0,0,0,
0,0,0,0,
1,0,0,0,
0,0,0,0,
2,0,0,0,
1,0,0,0,4,0,0,0,0,0,0,0,76,0,0,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255)
$ipList = @()
$octet = @()
foreach ($Network in $Networks)
    $ipList = $Network.IpAddress[0]
        $octet += $ipList.Split(".")
        $ipblock[36] +=1
        $ipblock[44] +=1;
$smtpserversetting = get-wmiobject -namespace root\MicrosoftIISv2 -computername localhost -Query "Select * from IIsSmtpServerSetting"
$ipblock += $octet
$smtpserversetting.RelayIpList = $ipblock
$smtpserversetting.put()
kautilya

Canon image runner advanced C2030/C20 ,printing labels problems

Question is for Canon image runner advanced C2030/C20 ,printing labels from Filemaker pro 10
1)how & where do you turn off the double sided printing?
2it )will only print the first 30 pages in a range,how do I increase this

goldn:
Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
1 - create the card and type Command-P.
2 - select Stylus Photo R200 under Printer
3 - click on the Advanced button
4 - in the bottom drop down menu select Paper Handling
5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
6 - now select Print Settings in the 3rd drop down menu
7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
10 - click on Print
11 - when the paper exits the printer quickly put it back in the printer
That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

I need to install the driver for the canon image runner c3170i, I need to install the driver for the canon image runner c3170i

I need help printing from my mac pro to a canon image runner c3170i, please! HELP

You want to ask in a forum for OS X, not Windows or Boot Camp. And a "Mac Pro" refers to the workstation, not the notebooks.
Start with Canon driver support.

Canon Image Runner 1028

Could you please help me import the Address Book in Canon Image Runner 1028. I tried the following with no success:
1. Installed Canon Address Book Conversion Utility
2. Saved 236 addresses in .abk format
3. In Canon Remote UI sem Add Func went to Import/Export and imported file.abk with option Address Book in Import, Choose File, OK
Even though I do not get an error message it appears my addresses are not imported in the Address Book. I repeated the procedure several times to no availability.
Thanks in advance,
Ana

The Network Printer kit which provided PCL5e and Postscript support was an option in our region for the iR5020. This may not be the case for you in the USA. If you have been printing already with this machine from Windows or older Mac versions then you most likely have the kit already.
You can check the existence of the kit by pressing the Counter Check button on the copier keyboard and then selecting the Device Configuration on the touch screen. This will show you if the Network Printer kit has been installed. If your machine does not have the kit then you will need to contact your local Canon copier sales dealership. However that model is about 7 years old so you may not have much luck with obtaining this kit now...
If you do have the printer kit then you can download the Canon PPDs via this [link|http://support-au.canon.com.au/contents/AU/EN/0100267504.html]. The package has the PPDs for many models of Canon imageRUNNER. After you unpack the file you run the installer to copy the files to your Mac. Then when you create your IP > LPD print queue you will find the Canon iR5020 in the Print Using menu.

Canon image-runner 5020

Is 10.6.4 compatible with a canon image runner 5050 office printer

The Network Printer kit which provided PCL5e and Postscript support was an option in our region for the iR5020. This may not be the case for you in the USA. If you have been printing already with this machine from Windows or older Mac versions then you most likely have the kit already.
You can check the existence of the kit by pressing the Counter Check button on the copier keyboard and then selecting the Device Configuration on the touch screen. This will show you if the Network Printer kit has been installed. If your machine does not have the kit then you will need to contact your local Canon copier sales dealership. However that model is about 7 years old so you may not have much luck with obtaining this kit now...
If you do have the printer kit then you can download the Canon PPDs via this [link|http://support-au.canon.com.au/contents/AU/EN/0100267504.html]. The package has the PPDs for many models of Canon imageRUNNER. After you unpack the file you run the installer to copy the files to your Mac. Then when you create your IP > LPD print queue you will find the Canon iR5020 in the Print Using menu.

How to scan with image runner 1023if and MacBook Pro

It's been a nightmare using the Image Runner and my MacBoo Pro, any one knows how?

Multifunction printer CANON Image Runner 1023if. I'm frustrated, I hate PC and I can scan in my MacBoock Pro, I'm getting very disappointed about scanning in a MacBook Pro, everything is a big deal trying to scan something even from a basic multifunction printer. I really need help!!
Thanks for asking.

I can no longer print to my work Canon Image Runner 4035. Is there a workaround while Canon releases a new driver?

Canon's support team suggested I just wait until they develop an appropriate driver. >.<

I need to make a clarification - I didn't realize that I now have a few choices for the "Canon IR ADV 4045" . The one that only says 4045 works, the one that says "4045/4051 UFR II (US)" does not (I didn't try the the third one, that says "4045/4051" without the "UFR II" ).
[edit - I also just noticed that you're all talking about the 4035, and I've got the 4045 - but I suspect they're close enough that it might not matter. They may actually use the same driver, but have different default features]
I can't tell which of these were installed from the driver on the canon page, whether one is left over from the old driver, or whether Mavericks included a driver built in - I have no idea if any or all of those are true, or which one I'm using, but it does work.
This is the dialog box that I get when I add a printer, choose "IP" and use the "select software" option to choose the driver (then type '4045" into the search box). It's the first one in the list that works for me:
Message was edited by: Joseph Delaney

My canon image runner 1025if machine will not send or receive faxes?

What can I do to fix this problem? The phone line is working fine ,I am sure it is in the phone line.

Have you tried to install some 3rd party image printing SDK to help you fix it? I am not sosure about it but I hope you success. Good luck.
Best regards,
Arron

Secure Print on Image Runner Advance C2230

Hello,
I'm trying to set up a few Mac OS X users for an office environment that requires secure printing on a Canon Image Runner Advance C2230. I wasn't able to set up the printer using Bonjour so I found it directly through its IP. I then tried several different versions of the driver like PS, PPD, UFRII (even though I don't really understand the difference). I did get the printer and Mac to communicate reliably and print, but can't get the secure print function to work. I see where the settings are and have selected to use secure print, but it just goes straight to the printer without having to go in and confirm the printout from the queue with the department ID. The only thing that I don't know what to set is where the settings have drop down boxes for mode 1 and mode 2 and can't find any documentation or anything that explains what they're for. If anyone has any experience or advice I'd appreciate it.

Thanks for posting! Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers who are in your area!

OSX Mavericks not able to print to Canon Image ProGraf 825?

Since upgrading to Mavericks, I have not been able to print to our Canon Image ProGraf 825.
anybody else having similar issues?

Today I went Canon's USA website for this printer's drivers, and when it asked for what operating system, I left it on OSX (Detected), and there is now an imagePROGRAF Printer Driver Update Ver.1.00 for OS X v10.9.
I installed it and it now works.

Setting Black and White as the default when printing to a Canon Image Class 4080i

Hi,
I've got two Canon Image Class 4080i's that we are printing to at the school I work at. I have installed the Canon UFRII V2.40 Printer Driver for Mac OS X and we are able to print to them fine through any macbook running 10.5 to 10.7. My question is, how do I make the default printer setting be Black and White instead of color? I know how to change it from Color to Black and White by navigating to the Quality menu through the Print screen but I have to do this every time I print. Is there a way to make black and white the default?
Thanks in advance,
Cheryll

You’re really going to take photos straight out of camera on a 5d3 and print them with a blindly applied B&W conversion from the printer? I would highly discourage that, but if that’s what you want to do I’m sure it’s possible. Sorry, I have no experience with that printer so I can’t help.
Do you have a laptop? My recommendation would be to use a photo processing software like Lightroom (if you don’t have it LR5 is ridiculously cheap right now), play around before the event to get a B&W conversion that you like – even the preset ones are going to be better than whatever conversion the printer does - and then print from LR. It’d hardly take any extra time, and you could get a brief review of the conversions on a laptop screen before printing.

Just got me a new camer canon 5D mark iii and now I can't send the images from lightroom to open in photoshop anymore

Hi Mark, I have lightroom and Photoshop CS6 and worked with it with my old camera, Canon 60D and had no problem
now I got me a new one, Canon 5D Mark iii and I can import the images into lightroom but I can't not send it from lightroom to photoshop. Also tried to drag and drop the picture image directly into photoshop but it wouldn't allow me to do so.
What do I have to do to get that working?

In Bridge, go to Edit->Preferences->File Type Associations

Canon 5d Mark II and Raw Images in CS4

HI
I have a Canon 5D Mark II and have just upgraded to standard CS4. When I go to view my Raw files on bridge I am unable to do this - all I see instaed of the thumbnail is the CR2 file. When I click on the file it states 'could not complete your request as it is not the correct type of document' - can you please advise how I can view these files?
Thanks

hu38 wrote: I have a Canon 5D Mark II and have just upgraded to standard CS4. When I go to view my Raw files on bridge I am unable to do this - all I see instaed of the thumbnail is the CR2 file. When I click on the file it states 'could not complete your request as it is not the correct type of document' - can you please advise how I can view these files?
The Canon 5D Mark II requires at least version 5.2 of the ACR plug-in. See http://kb2.adobe.com/cps/407/kb407111.html
The CS4 default installed ACR 5.0 so you have to upgrade the plug-in.
Get version 5.6 here: http://www.adobe.com/downloads/updates/

Problems with FCP 5.1.4 and OSX 10.4.9

I upgraded to Tiger, installed the new FCP Studio and everything was working fantastic.
The next morning there was a software update for Tiger and FCP-5.1.4, it's been a nightmare ever since. When I restarted FCP would not recognize my Sony HDR FX1.
I had this problem once before with 4.5 and I fixed it by re-installing FCP and doing the upgrades, so that's what I did with 5 but this time there was a new problem. It wouldn't let me work on anything that I had opened since I did the software update, so I had to do the update again and then FCP wouldn't recognize my camcorder again on startup. If you pressed log and capture you could control the camera but no capture was possible.
So I re-set the easy set-up and presto! everything was fine and I worked productively for a few days.
But then I had to capture some SD from my Canon GL2 so I reset all the settings for DV NTSC and reset the easy set-up for DV NTSC but now FCP won't recognize my GL2 on start-up. If I click log and capture I can control the camera but no capture.
My next try to solve my problem was to downgrade back to my original 10.4.6 and FCP 5.1
That put be back to square one and everything works fine again except I am left with the problem that everything that I worked on after I did the update won't open, I get error 41.
Now I know this is because I am now trying to work on these projects with 5.1 after they were worked on in 5.1.4. But the problem is that everytime I update to 5.1.4 I can no longer capture or print to tape.
I tried the trashing the FCP prefs thing and the repairing permissions thing but I can't seem to solve the problem.
Has anyone else had any problems using FCP 5.1.4 and OSX 10.4.9?

Not sure how you tried to install 10.4.8 but if all
else fails you can always reinstall the original
operating system that came with your Mac using 'Erase
and Install' then upgrade it to 10.4.8 - probably in
stages.
Erase and install should be used as a last resort! A better option is to use the "archive and install" feature. It renames your old system folder and creates a new one for the OS you just re-installed. That way you don't have to reinstall everything, your user accounts and emails should all still be there, and if something doesn't work, you have your old system folder to pull things like preference files out of.
Eric

Canon Image Runner 5045 and OSX 10.9

Similar Messages

Maybe you are looking for